AdControl error: HTTP error status code: NotFound (404)

For over a week now, a Silverlight WP 8 app with an AdControl configured for "test_client" continues to report this error and thus no bing ad visible either while running from an emulator (8.1 512) or from a WP 8 device. If I change the AdUnit
to use a PubCenter ID it works fine on the device and ads are displayed. The emulator connects to the Internet just fine via IE.
Could the ad server not be responding to the "test_client"?
Could someone let me know if it has worked recently for them? I tried contacting MS and no one seems to have an app configured with the test ad... I could give MS so many helpful suggestions. But looking at the hundreds of un-answered posts here - I
suppose they're busy with Windows 10...and have they asked developers if they're willing to put up everything on the cloud? all the while people still waiting to see the 'start' button on Windows 9?
here's the trace
Ad Err: NetworkConnectionFailure,Microsoft.Advertising.Shared.AdException: HTTP error status code: NotFound (404) ---> System.Net.WebException: The remote server returned an error: NotFound. ---> System.Net.WebException: The remote server returned
an error: NotFound.
 at System.Net.Browser.ClientHttpWebRequest.InternalEndGetResponse(IAsyncResult asyncResult)
 at System.Net.Browser.ClientHttpWebRequest.<>c__DisplayClasse.<EndGetResponse>b__d(Object sendState)
 at System.Net.Browser.AsyncHelper.<>c__DisplayClass1.<BeginOnUI>b__0(Object sendState)
 --- End of inner exception stack trace ---
 at System.Net.Browser.AsyncHelper.BeginOnUI(SendOrPostCallback beginMethod, Object state)
 at System.Net.Browser.ClientHttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
 at Microsoft.Advertising.Shared.HttpRequest.EndGetResponse(IAsyncResult asyncResult)
 at Microsoft.Advertising.Shared.WebRequestWrapper.WebRespCallback(IAsyncResult result)
 --- End of inner exception stack trace ---
I do love Windows - don't get me wrong - I'll check my 2nd dev system soon.

Hi Ravi,
Reward points if this helps
The J2EE server might be overburdened and cannot accept the call. The 'Receive'servlet is not called. You will find further details on the HTTP status code definitions under "http://www.w3.org". Check the accessibility of the server by calling: http://<hostname>:<port>/MessagingSystem/receive/AFW/XI.
The Listener Beans of the affected connection (AFW, Marketplace, BC,see above) were not registered or the log-specific Event Handler was not found.
Check out this trouble shooting guide for SAP XI...Section 7.4.4.4 talks about exactly the same problem:-
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283
Reward points if this helps
Regards
Pragathi.

Similar Messages

When send a soap to XI encounter a error -HTTP-client: status code = 401

The scenario is to send a soap request to SAP ERP through XI from legacy system A, ERP and return information back to the legacy system. we have encounter this issue after XI received the soap from legacy system A.
I have already done:
1. tested the JCO related RFC destination,
2. Check PIAPPLUSER has role SAP_XI_SERV_USER
3. refresh SXI_CACHE
4. ENSURE USER PIISUSER and PIAFUSER have the correct password
5. reset the password in exchange profile and ensure it is consistant with the password maintained in SU01, and restart the j2ee engine
however, we still encounter the same 401 issue.
Please kindly advice the approach to resolve this issue
Regards
Jack Lee

Hi,
you are getting this 401 error because either the username or password used for sending the SOAP req to XI system is not correct..........or the user is locked in XI system..........or the user is not having proper authorization XI_APPL_SERV_USER role to that userid..........
so just ask your SOAP aapplication guys which user they are using to send the SOAP req to XI - they should use some user to send the req and if they are not using any user, then also you will get this 401 user........so ask them to use a user of XI which you will give them having the proper authorization by asking your basis guys to do it.
Regards,
Rajeev Gupta

XI - Call Adapter Error - HTTP client. Code 402 reason ICM_HTTP_TIMEOUT

I am using HTTP adapter to post XML PO to vendor's site. We are having this problem with one of our vendor when PO's has more than 15 line items. XI server is getting error-"Call Adapter Error - HTTP client. Code 402 reason ICM_HTTP_TIMEOUT". Actually PO is posted good for the first time on vendor's site but XI is getting above error message and it keeps posting it again. Is there anyway to stop it otherthan manually stopping the XI message? Is there anyway to increase the wait time of the XI server to get the message.
Thanks in advance.
Mrudula Patel

I'm getting the same issue "500 TIMEOUT error" in runtime work bench-->IE--->Test Message. When i manually trigger the file.
The issue is basically from 01-01-2015 02:00 pm to 02-01-2015 01:am , File is picked from source ftp folder and places in archive but xml messages are not reflecting in SXMB_MONI.
Today suddenly after 01:00 am messages are successfully processing.
Please help on this issue. Many Thanks.

Firefox 3.6.3, windows 7 HP,flash player 10.1.53.64---unexpected http response-status code 13030--

windows 7 HP, Firefox 3.6.3,flash player 10.1.53.64--unexpected HTTP response-status code 13030- any idea on what to do?
== URL of affected sites ==
yahoo mail

Same problem here! Actually took me quite awhile to figure out what the hell was causing the slight screen flicker when going on Youtube, but I'm confirming this. With Hardware Acceleration enabled, Flash changes GPU Memory (VRAM) frequency and locks it so that it can't be changed until the video page is closed. Mine downshifts from 950 down to 500, which is quite of an achievment as for some reason this card with it's fancy schmancy GDDR5 memory isn't too keen on underclocking the VRAM..
Hardware:
CPU: Intel Core 2 Quad Q6600 2,4Ghz @ 3 Ghz
RAM: 4GB A-Data 800mhz
GPU: ATI Redeon HD 4870
GPU clock settings:
- GPU: 790 MHZ/ default 750 MHZ
- VRAM 950 MHZ/ default 900 MHZ
MB: MSI P35 Neo Combo
Software:
OS: Windows 7 Ultimate x64
Browser: Firefox 3.6.3 and it's speedy variant Pale Moon (http://www.palemoon.org)

LSO Content Player Error - HTTP Error 404 - File or directory not found

Hi All
Please could you assist.
I have published a course to my ISS CMS and configured the links in both ECC and J2EE lsm/mediator.
Result
Username='username', SystemName='HRD', Client='030', Host='22.22.22.22', Language='EN', SystemNumber='00', EnablePoolSharing='true', MaxConnection=50, AbapDebug=false:
CPCFG.RSURL = http://iiscmshost.domain/LSO600/Content/
CPCFG.REPUS = username
ServerURL=http://iiscmshost.domain/LSO600/Content/ ok!
I was able to successfully publish the course from the Authoring Environment to the CMS server.
When selecting the starting the course from the portal with content player i get the following error.
HTTP Error 404 - File or directory not found
But the URL is referring to - http://iiscmshost.domain/lms/mediator/courseview?sid=8685627505550088697845288091101&language=EN&sys=HRD&client=030&sap-accessibility=X
How does directory http://iiscmshost.domain/lms/mediator get created when the content is in http://iiscmshost.domain/LSO600/Content ??
Secondly can I change this reference to my LSO600/Content directory.
Please advise with any information. Point will be awarded.
Regards
Maahir

Dear Maahir,
We are facing the same problem. We are pointing over CMS to IIS, instead of KM content of portal. We are successfully able to release and publish the course, then attach to a course participant also.
But. When participants logs into the portal and click on Start Now. It giving 404 file not found Error. Its the same error. All our Course and content pointed to CMS IIS Server Url.
When we did the content player config test, result is NOT OK. We have required R3 authorization and CMS user authorization also with admin rights. Content Player console is working in AE when we start up the course. Its showing the error.
So, it seems like content player is not working properly. Bcoz we are launching course from http://WEBDAV repository server maintained in back end system. Which is the IIS(CMS Server)for us. Do we need to maintain anything separately to launch a course from IIS Server on R3 and SAP Portal. Below sample URL from page.
http://Sever:port/lms/mediator/courseview = xxxxxxxxxxxxxxx
Could you please us know, how did you resolve the issue and tell me the cause of this issue.
Thanks and Regards
Obli

How to Implement HTTP Request Status Code Processing

I actually have two questions. First, I wondering how to add multiple status code processing to an http request. Secondly, I was wondering how to go about using alternate http requests to different servers in case the primary server is down. What kind of parameter would the program use to determine that the server is unavailable and switch to another server??
Currently, the program I've written calls an rdf server (http://www.rdfabout.com/sparql) using a sparql query,
the server returns an xml string, the program parses it, and calculates numbers
from the string. The program works, but the problem is that the server is down occasionally.
When the server is down, we need to add calls to another server to
increase reliability. So, the next task is to call this server:
http://www.melissadata.com/lookups/ZipDemo2000.asp
I need to do exactly the same things I did with the rdf server. The
difference will be constructing a request and a bit different parsing of
the response.
current SPARQL query is defined as follows:
PREFIX dc: <http://purl.org/dc/elements/1.1/>
PREFIX census: <http://www.rdfabout.com/rdf/schema/census/>
PREFIX census1: <tag:govshare.info,2005:rdf/census/details/100pct/>
DESCRIBE ?table WHERE {
<http://www.rdfabout.com/rdf/usgov/geo/census/zcta/90292> census:details
?details .
?details census1:totalPopulation ?table .
?table dc:title "SEX BY AGE (P012001)" .
}current HTTP Request is defined as follows:
import java.net.*;
import java.net.URL;
import java.net.URLConnection;
import java.io.*;
import java.io.DataOutputStream;
import java.io.BufferedReader;
import java.io.StringReader;
import java.io.InputStreamReader;
import java.io.PrintStream;
import java.util.Scanner;
import java.util.regex.Matcher;
import java.util.regex.Pattern;
import java.util.Arrays;
public class MyConnection
 static Scanner sc = new Scanner(System.in);//allows user to input zipcode
 public static void main(String[] args) throws Exception
 int zip;//zipcode is declared as integer format
 //User defines zip through input
 //proceed to put SPARQL query into string, which is then used to call the server
 String requestPart1 =
 "query=PREFIX+dc%3A++%3Chttp%3A%2F%2Fpurl.org%2Fdc%2Felements%2F1.1%2F%3E+%0D%0APREFIX+census%3A+%3Chttp%3A%2F%2Fwww.rdfabout.com%2Frdf%2Fschema%2Fcensus%2F%3E+%0D%0APREFIX+census1%3A+%3Ctag%3Agovshare.info%2C2005%3Ardf%2Fcensus%2Fdetails%2F100pct%2F%3E+%0D%0A%0D%0ADESCRIBE+%3Ftable+WHERE+%7B+%0D%0A+%3Chttp%3A%2F%2Fwww.rdfabout.com%2Frdf%2Fusgov%2Fgeo%2Fcensus%2Fzcta%2F";
 String requestPart2 = "" + zip; // zipcode is transformed from int to string format and plugged into SPARQL query here
 String requestPart3 =
 "%3E+census%3Adetails+%3Fdetails+.+%0D%0A+%3Fdetails+census1%3AtotalPopulation+%3Ftable+.+%0D%0A+%3Ftable+dc%3Atitle+%22SEX+BY+AGE+%28P012001%29%22+.+%0D%0A%7D%0D%0A&outputMimeType=text%2Fxml";
 String response = "";
 URL url = new URL("http://www.rdfabout.com/sparql");//designates server to connect to
 URLConnection conn = url.openConnection();//opens connection to server
 // Set connection parameters.
 conn.setDoInput (true);
 conn.setDoOutput (true);
 conn.setUseCaches (false);
 // Make server believe we are form data
 conn.setRequestProperty("Content-Type","application/x-www-form-urlencoded");
 DataOutputStream out = new DataOutputStream (conn.getOutputStream ());
 // Write out the bytes of the content string to the stream.
 out.writeBytes(requestPart1 + requestPart2 + requestPart3);
 out.flush ();
 out.close ();
 // Read response from the input stream.
 BufferedReader in = new BufferedReader (new InputStreamReader(conn.getInputStream ()));
 String temp;
 while ((temp = in.readLine()) != null)
 response += temp + "\n";
 temp = null;
 in.close ();
 //parsing stuff is taken care of after here
}What remains now is to:
1) add status code processing: notify if the server is not available, ect.
2) add ability to connect to additional server if primary server is down.
I'm thinking an if/else statement, which I've tried a few different ways,
but I don't quite know how to implement that...Also trying to add the
status code processing/error handling, but I'm not sure how to do that
for multiple/different errors, such as 404, 503, 504, ect.. try/catch statements?
So yeah, just been scratching my head on this trying to figure out how to work it..
If you can help me out on this, I've been going nuts trying to figure this out...

I think your issue comes form the fact that you are not casting URLConnection to HttpURLConnection.
Doing the cast would allow you to use getResponseCode() - among other methods - and test for a response different than 200.
Read: [http://mindprod.com/jgloss/urlconnection.html|http://mindprod.com/jgloss/urlconnection.html]

HTTP Response Status Codes: GET (retrieve), POST (create), PUT (modify), and DELETE (REST, Bulk, Any API)

Many of us, who are starters, starting to wonder when reading any API documentations or starting out with your first program built to make any of the API calls, what do all error codes means, when I get many different types of response from running the program/script. The only reason I thought about sharing this is because I know how motivation plays a key role when dealing with Eloqua platform and building components on top. This extends the functionality beyond what is already out of the box.
I put together a table that explains these in details. I hope you can benefit in resolving issues as you venture in your journeys. This is a very common chart that can be seen across many platform REST APIs. Idea was to have it here because the audience are not always the same.
Response Code
HTTP Operation
Response Body Contents
Description
200
GET, PUT, DELETE
Resource
No error, operation successful.
201 Created
POST
Resource that was created
Successful creation of a resource.
202 Accepted
POST, PUT, DELETE
N/A
The request was received.
204 No Content
GET, PUT, DELETE
N/A
The request was processed successfully, but no response body is needed.
301 Moved Permanently
GET
XHTML with link
Resource has moved.
303 See Other
GET
XHTML with link
Redirection.
304 Not Modified
conditional GET
N/A
Resource has not been modified.
400 Bad Request
GET, POST, PUT, DELETE
Error Message
Malformed syntax or a bad query.
401 Unauthorized
GET, POST, PUT, DELETE
Error Message
Action requires user authentication.
403 Forbidden
GET, POST, PUT, DELETE
Error Message
Authentication failure or invalid Application ID.
404 Not Found
GET, POST, PUT, DELETE
Error Message
Resource not found.
405 Not Allowed
GET, POST, PUT, DELETE
Error Message
Method not allowed on resource.
406 Not Acceptable
GET
Error Message
Requested representation not available for the resource.
408 Request Timeout
GET, POST
Error Message
Request has timed out.
409 Resource Conflict
PUT, PUT, DELETE
Error Message
State of the resource doesn't permit request.
410 Gone
GET, PUT
Error Message
The URI used to refer to a resource.
411 Length Required
POST, PUT
Error Message
The server needs to know the size of the entity body and it should be specified in the Content Length header.
412 Precondition failed
GET
Error Message
Operation not completed because preconditions were not met.
413 Request Entity Too Large
POST, PUT
Error Message
The representation was too large for the server to handle.
414 Request URI too long
POST, PUT
Error Message
The URI has more than 2k characters.
415 Unsupported Type
POST, PUT
Error Message
Representation not supported for the resource.
416 Requested Range Not Satisfiable
GET
Error Message
Requested range not satisfiable.
500 Server Error
GET, POST, PUT
Error Message
Internal server error.
501 Not Implemented
POST, PUT, DELETE
Error Message
Requested HTTP operation not supported.
502 Bad Gateway
GET, POST, PUT, DELETE
Error Message
Backend service failure (data store failure).
505
GET
Error Message
HTTP version not supported.
Hope this helps. Original post: REST API Status Codes and Complete REST API Tutorial with Status Codes.
Thank
Amit

Hi, I am trying to PUT to update contact info and I get following error:
2015-01-16 11:00:17,970 INFO [main] oracle.eloqua.connector.eloqua.EloquaConnector.putWithBasicAuth(97) | accessHttpsPut.url=https://secure.eloqua.com/API/REST/2.0//data/contact/7606838, text={"id":"7606838","accountName":"openIdStr001","emailAddress":"[email protected]","type":"Contact"}
2015-01-16 11:00:18,931 ERROR [main] oracle.eloqua.connector.eloqua.EloquaConnector.putWithBasicAuth(140) | ClientProtocolException
org.apache.http.client.HttpResponseException: Request is malformed.
Is there any idea?
Thanks so much.
Sincerely.

Setting the status code on 404

Hi All,
I have my web.xml file pointing 404 errors to /404.jsp on my web server (Apache/Tomcat).
The code for 404.jsp is
<%
// Set the header response to a 404 and no-caching
response.setStatus(response.SC_NOT_FOUND);
response.setHeader("Cache-Control","no-cache");
%>
<jsp:include page="/404message.jsp"/>
404message.jsp contains html and some other jsp scriptlets to display a nicely formatted error page that fits with the look and feel of the web site I am currently working on. I have to set the status like this otherwise the 404 error returns a response of 200 which is no good for the statistics program we run on the site.
It all seems to work wonderfully except that in the localhost log for tomcat I get the following exception even though everything seems to work fine.
2005-04-21 16:11:12 ErrorDispatcherValve[alligator]: Exception Processing ErrorPage[errorCode=404, location=/404.jsp]
java.lang.IllegalStateException: Cannot reset after response has been committed
at org.apache.catalina.connector.ResponseBase.reset(ResponseBase.java:789)
at org.apache.catalina.connector.HttpResponseBase.reset(HttpResponseBase.java:812)
and so on....
Anybody point me in the right direction on this, any help much appreciated??
Cheers,
Beno..

Just wanted to bring this one back to the front as had a zero response.
Anyone shed any light on it for me??
Cheers,
Beno..

E Filing GB out going process error HTTP error 500 internal server error

Hi Gurus,
I am getting the following error in the MONI of PI system.
Its a synchonous scenario from SAP ECC6 PROXY to SAP PI 7 to HTTP Type G.
Request Trace error : Internal Server Error
RESPONCE Error Message : HTTP server code 500 reason Internal Server Error explanation
Also I am getting the the same error while testing connection test in SM59 RFC destination type G.
Status HTTP Response     500
Status Text                     Internal Server Error
Duration Test Call                      8 ms
Regards
Sreeni

Hi Kancham,
Please check the RFC destination type G created in SM59 is correct or not .
Logon procedure
if you are using
No logon. The server program does not require you to enter a user and password.
Basic Authentication. The server program requires you to enter a user and password.
Check user name ,password is correct in RFC destination if the external HTTP server requires user credentials.
Without successfully running this RFC , you are not able communicate with the external HTTP server (Target system).
Also check that your HTTP server is running fine bcoz if it's down that also could be the reason for your problem.
regards
Ashwin
Edited by: ashwin dhakne on Mar 9, 2009 1:06 AM
Edited by: ashwin dhakne on Mar 9, 2009 1:08 AM

HTTP 414 Status code for POST messages greater than 4096 bytes.

Hello,
I am using Sun One 6.0 sp2 and Weblogic 6.1 sp3 for my application. All the requests
are being sent to the Weblogic server using the NSAPI plug-in.
For all POST messages with size greater than 4096 bytes, I am getting a HTTP Status
Code 414.
I have set the MaxPOSTSize to 10240 both on the Weblogic server side, but it still
gives same error.
Can someone please guide me as to how to enable processing of POST messages greater
than 4096 bytes ?
Thank You.
Sanjay.

Hi, I am trying to PUT to update contact info and I get following error:
2015-01-16 11:00:17,970 INFO [main] oracle.eloqua.connector.eloqua.EloquaConnector.putWithBasicAuth(97) | accessHttpsPut.url=https://secure.eloqua.com/API/REST/2.0//data/contact/7606838, text={"id":"7606838","accountName":"openIdStr001","emailAddress":"[email protected]","type":"Contact"}
2015-01-16 11:00:18,931 ERROR [main] oracle.eloqua.connector.eloqua.EloquaConnector.putWithBasicAuth(140) | ClientProtocolException
org.apache.http.client.HttpResponseException: Request is malformed.
Is there any idea?
Thanks so much.
Sincerely.

SOAP Receiver Error: HTTP Error response for SOAP Request

Hi gurus,
I'm facing a weird error in File --> PI 7.31 java only --> soap receiver proxy.
The other interfaces runs well. just one get the the following error:
Exception caught by adapter framework: java.io.IOException: Error receiving or parsing request message: java.io.IOException: HTTP Error response for SOAP request or invalid content-type.
I check the payload and test in the inbound proxy. on error.
Any hints?
Thanks a lot!
regards
Christine

Hello Christine,
I faced the same issue,
You can use the beans below to overcome the error.
And charset should be utf-8

Archive link error:HTTP error: 401 Unauthorized

Hi all,
I am getting "HTTP error: 401 Unauthorized" error while uploading pdf via archive link store business document
from front end.
Any solution
Regards
Abhijit

Abhijit,
Check that the OS user that is used to run the web application has read/write permissions for the both the "installation path" and the "repository path" - for UNIX its the Apache user id and for Windows its the user that started the IIS service.
This may resolve your issue.
-Srini

DMS error HTTP error: 411 Length Required

Hi,
I am geting following error while creating the content repository on R/3 ( ECC 5.0 ).
HTTP error: 411 Length Required
If I click on ok make I am geting next popu error as follow
HTTP error: 500 (Internal Server Error) "ContRep ZHTTP_HCP or Storage entry not defined"
As per SAP note 925327 in need to apply the kernel patch 122 our current patch level is 101.As per the note there is one short term solution i.e. use SAPHTTP. But am not geting how to do that since we dont have the much time to apply the kernel patch at this step coz our golive data is very near i.e. 23-05-2007.
So please help me.
Thanks a lot,
Harshal

Hello Harshal,
I have the same error. Did you solve your problem ?
Dimitry

Blackberry stimulater error : Http Error 503:Service Unavilable

Hi mobile Guru's,
i have developed a webdynpro java application in CE7.1. and i tryed to run the application in Blackberry stimulater 1.4.7.
But i am getting the following .
1.Http Error 503:Service Unavilable(The Server is currently unable tohandle your request due to temprory overload or maintanance of the server.)
2 Network error(tcp_error)
Regards,
Vivek
Basis Admin

Hi,
You need to start the MDS simulator if you want to communicate with the simulator (handheld).
Regards,
Pierre

I get the error: HTTP Error 400. The request is badly formed.

I am running Windows XP Professional. This seems to happen on most websites with the exception of search engines and Firefox Support sites.

"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now" 
"Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies" 
 
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes). 
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

AdControl error: HTTP error status code: NotFound (404)

Similar Messages

Maybe you are looking for