"Add a column to show each of these additional fields: " doesn't support person feild

"Add a column to show each of these additional fields: "  doesn't support person feild
I've seen that its not supported in 2010 version of sharepoint but I was hoping in the last 3 years  its been fixed for the 2013 
Any idea if this will be fixed or not?

Given that it hasn't been fixed so far, i doubt it.
The reason it doesn't work for some columns is that they themselves  are a form of lookup column. I suspect MS have disallowed it to prevent looping, where a lookup column eventually starts trying to look up on itself. There may be other technical challenges
to making a double hop lookup column.

Similar Messages

  • How to add a column that shows the difference of two metrics columns?

    I created a pivot table with two metrics columns. One metrics column has the aggregation rule of 'Min', the other has 'Max'. Now I want to add a column to show the difference of these two metrics for each row. Is this possible? How to do it? Thank you in advance.

    Use TimeStampdiff:
    TIMESTAMPDIFF(SQL_TSI_HOUR, MIN(xxxx), MAX(xxx))
    It's in the help file if you need more help.
    regards
    Alex

  • How can I add a column to show the website (web site) of an rss feed?

    I've got a lot of rss feeds coming into thunderbird. I organized some into folders, but also have a folder for several rss feeds as they adress the same topics and I prefer not to browse through 25 separate folders. However, the sender doesn't always make it clear which blog it's from, so I'd like to add a column which shows the website of the rss feed. (sender is often: [email protected], and there are different writers for a single blog who themselve have their own blog as well, so can't sort on sender name either).
    When opening an rss feed, it displays in the header: web site (with the space) and then the web adress. This is what I'd like to be able to see in my columns.
    I didn't see an option yet to customize columns, nor did I find an addon that does this.
    Does anyone know a solution?

    Thanks, that seems to work. I'm struggling to place the lightbox at the top of the page however - when I click the trigger I want the menu image to display anchored to the top of the page, but there's always a gap as it centers the image. Help is appreciated!

  • After Update to iOS5, i can't synchronise my films, showing me 'error 19', your iPad doesn't support this videoformate..any ideas to solve my Problem?

    After Update to iOS5, i can't synchronise my films, showing me 'error 19', your iPad doesn't support this videoformate..any ideas to solve my Problem?

    To delete, tap "Edit" (tap to enlarge image)

  • How to add a column in alv grid report to show the serial no.

    i need to add column to show the row no. of the report say as :
    1
    2
    3
    this has to be the first column
    how to maintain a variable for this and how to use it??
    please help

    one simple way is in your final itab declare a slno type i field
    data : begin of itab occurs 0,
    slno type i,
    <other fields>
    end of itab.
    after filling the data in itab.
    loop at itab.
    itab-slno = sy-tabix.
    modify itab.
    endloop.
    in fieldcatalog also you have to define that slno field as the first column.
    but it will change its order if you are sorting the output or filtering the output.
    regards
    shiba dutta

  • Is there a way to add a column after a filled DataTable from SQL with the same rows?

    My problem is that not to add rows like filled by SQLDataAdapter at the same row in DataGridView. How to make that? I showed below the details with my code also a screen shot, which shows the rows differences from the origin one.
    I don't want to add an expression as column behave in my sql script to get what I need with query result. I don't want to obtain that way.
    using (SqlConnection c = new SqlConnection(ConnStrMSSQL))
    c.Open();
    // 2
    // Create new DataAdapter
    using (SqlDataAdapter a = new SqlDataAdapter("SELECT SIPNO, SERINO, TARIH FROM SNOHAREKETLER WHERE Cast(TARIH as DATE) BETWEEN '2015/03/20' AND '2015/03/20' AND (TEZNO = 'T23' OR TEZNO = 'T31') AND CIKTI is null", c))
    // 3
    // Use DataAdapter to fill DataTable
    DataTable t = new DataTable();
    a.Fill(t);
    t.Columns.Add("MyColumn", typeof(string));
    DataRow workRow;
    int iGetCount = t.Rows.Count;
    for (int i = 0; i <= iGetCount - 1; i++)
    workRow = t.NewRow();
    workRow["MyColumn"] = i;
    t.Rows.Add(workRow);
    dataGridView1.DataSource = t;

    The extra column isn't applied to only certain rows.  The columns of a table identify what data each row will contain.  Hence adding a column to the table automatically adds them to the rows.  What you're seeing is that all the initial rows
    aren't being assigned a value so they retain their default value of null.  Later you enumerate the rows of the existing table and call AddRow which adds new rows.  This isn't adding columns, but rows.
    To generate values for the existing rows you should ideally simply pass the data back from the database.  DT computed columns can be difficult to set up as it is limited to what it can do.  If you want to use a computed column on the Datatable
    itself then define the column as a computed column and every row will calculate its own value.
    DataTable data = GetData();
    //Add elapsed time column
    var col = new DataColumn("ElapsedTime", typeof(TimeSpan), "expr");
    data.Columns.Add(col);
    dataGridView1.DataSource = data;
    The issue you will run into however is that calculating a diff on DateTime doesn't work in a computed column as the expression doesn't support the necessary functions.  You can google for how people solved this if you are interested in alternatives. 
    Most people just tend to add the column and then hook into the various change events to update the value as needed.

  • How to Print the Report Column headers on each page of any report

    Can someone offer assistance on how I can go about achieving the ability to show and print the Report Column headers on each page of any report using the Print Attributes of APEX 3.0? These reports will be printed using Excel and Word.
    I read a thread with a similar request but the answer seems vague for my level of understanding.
    I am connected to a print server and using BI Publisher.
    Thanks,
    Ric

    Hello Ric,
    >> These reports will be printed using Excel and Word.
    I'm not sure I understand what you are trying to do. You are using a very powerful tool – BI Publisher – why do you need Excel or Word for printing? Is there a special need only Excel or Word can provide?
    One of the major advantages of using BI Publisher is that it's taking care of all these tedious tasks like reasonable page breaking, headers and footers, and also table headers.
    Regards,
    Arie.

  • How do I add a different title to each slide in a LR3 slideshow?

    This question has been asked, but for some reason I cannot access it.  Thanks!

    John,
    You add a distinct title and/or caption for each photo in the metadata panel and then reference these metadata fields in the slide show with a text field.
    Beat Gossweiler
    Switzerland

  • How to add different columns in a single dashboard prompt?

    Hi
    I am new to this forum. I got a new requirement, my client is asking me to show multiple columns with multiple tables in a single dashboard prompt
    for Ex: Column name Table name
    1. Customer 1. Customer Details
    2. Market 2. Region
    3. Order 3. Order Status
    4. Product 4. Product Type
    He wants to show all these column names in a single prompt when user click on the particular column name it should appear on report. Is it Possible? if possible tell me how?

    See this thread...
    Re: How to add new columns by using Multiselect

  • How add new column in analysis from two subject area

    which is the right way to add a new column to an existing combined analysis from two subject areas?
    if I add the new column first in my two combined queries, then I saw a new column in the results column panel, but this new column is empty and I can't edit its propreties (the button edit column doesn't work). I can't even save the modified analysis due to a "bad xml" errror.
    if I try to first add a new column from the results panel and then in my combined queries, obiee says that new columns are not of the same type.
    I suppose this is because the new column in results panel has no aggregation formula, unlike new columns in queries.
    But I don't know how to change the properties of the new field in the results panel, with no subject area available.
    I have to restart from a single subject area? possible?
    In this case, there is a way to save/copy filters ecc. from the old analysis?
    If anyone can help.
    Thanks
    Luc

    When you are using union clause in analysis or combining with other subject area you suppose to have same number of columns and their datatypes with other analysis.
    for datatype issues you can use cast in column expression in each analysis. If you want to add a column only from 1 analysis just add and in other analysis use dummy column with exp 0 or ''(for char) based on the datatype.
    These you have to deal with each analysis.
    If helps pls mark

  • How to add a column to a list created with the Dynamic List Wizard to display the values of the fiel

    Hi,
    ADDT, Vista, WAMP5.0
    We have 2 tables: clients_cli (id_cli, name_cli, tel_cli, and several more fields) and cases_cas (id_cas, idcli_cas, court_cas, and a lot of other fields).
    Clients may have many cases, so table cases_cas have a foreign key named idcli_cas, just to determine which case belongs to which client.
    We designed the lists of the two tables with the Dynamic List Wizard and the corresponding forms with Dynamic Form Wizard.
    These two forms are linked with the Convert Dynamic List and Form Wizards, which added a button to clients list named "add case".
    We add a client and then the system returns to the clients list displaying all clients, we look for the new client just added and then press "add case", which opens the Dynamic Form for cases, enter all case details and everything processes ok.
    However, when we view the cases list it display all the details of the case, including the column and values for the foreign key idcli_cas. As you can image, it is quite difficult for a human to remember the clients ids.
    So, in the cases list we added a another column, named it Name, to display the names of the clients along with cases details. We also created another recordset rsCli, selected the clients_cli table, displaying all columns, set filter id_cli = Form Variable = idcli_cas then press the Test button and everything displays perfect. Press ok.
    Then, we position the cursor inside the corresponding cell of the new Name column, go to Bindings, click on name_cli and then click on insert. The dynamic field is inserted into the table cell as expected, Save the page, and test in browser.
    The browser call the cases list but fails to display the values of the Name column. The Name column is simply empty.
    This issue creates a huge problem that makes our application too difficult to use.
    What are we doing wrong?
    Please help.
    Charles

    1.     Start transaction PM01, Create Infotype, by entering the transaction code.
    You access the Create Infotype screen.
    2.     Choose List Screen.
    3.     In the Infotype no. field, enter the four-digit number of the infotype you want to create.
    When you specify the infotype number, please remember to enter any leading zeros.
    4.     In the Screen Number field, enter the screen number of the list screen you want to enhance.
    5.     Choose Create.
    The Dictionary: Initial screen appears:
    6.     Create the list screen structure.
    7.     Choose Activate.
    8.     Return to the Enhance List Screen in the Enhance Infotypes transaction (PM01).
    9.     Choose Create All.
    The additional fields are displayed on the list screen, however, they contain no data.
    The fields can be filled in the FORM routine FILL-LISTSTRUCT in the generated program ZPnnnn00. The FORM routine is called for each data record in the list.
    Structure ZPLIS is identified when it is generated with a TABLES statement in the program ZPnnnn00.
    The fields can be filled from the Pnnnn structure or by reading text tables.

  • Add special column to author grid for cq5.4

    Hi
    On the siteadmin I want to add a new column for each page to the layout grid. The column should show some special content for the page.
    On CQ 5.5 there is a Interface ListInfoProvider to add such a new column.
    see http://dev.day.com/docs/en/cq/5-5/developing/customize_siteadmin.html
    Is there something similar for CQ 5.4?
    Best regards
    Jan Stettler

    I remember working on a similar ticket. You might need to modify SiteAdmin.js file at two places as given below:
    Line 154
    CQ.wcm.SiteAdmin.COLUMNS["cug"]
    Line 2225
    "cug": {
            "header":CQ.I18n.getMessage("CUG"),
            "id":"cug",
            "dataIndex":"label",
            "width":80

  • How to add af:inputFile dynamically within each row of table?

    I need to add af:inputfile dynamically within each row of af:table, when the user hits a commandlink at the bottom of each row.
    I have tried wrapping af:inputfile with af:foreach:
    <af:table value="Bean.rows" var="row">
    <af:column>
    <af:forEach step="1" begin="1"
    end="#{Bean.filecount}">
    <af:inputFile label="Please upload a file"
    id="1"
    valueChangeListener="#{Bean.onClickUpload}"/>
    </af:forEach>
    <af:commandLink text="Add more file" id="cl3" actionListener="#{Bean.onAddFile}"/>
    </af:column>
    </af:table>
    in Bean.onAddFile, I have:
    public void onAddFile(ActionEvent event){
    filecount++;
    It works but there's no independent control of each row. When I click one commandlink, All rows now have 2,3,.... af:inputFile. The change affects all rows.
    The requirement should be that when I click one commandlink in a row, only that row shows additional af:inputFile.
    So why not leverage the row variable of the table, right? That's what I did, I changed the end attribute of foreach to the following:
    <af:forEach step="1" begin="1"
    end="#{row.fileRowCount}">
    the backing bean method changed to the following:
    public void onAddFile(ActionEvent event){
    int filerowcount = (Integer)JsfUtil.resolveExpression("#{row.fileRowCount}");
    Integer newcount = filerowcount+1;
    JsfUtil.setExpressionValue("#{row.fileRowCount}", newcount.toString());
    Note that "row" refers to an object that has a int field called "filerowcount". And the initial value is "1".
    Just for testing, I also added <af:outputText value="row.filerowcount"/>, to see if the count is what I expected it to be.
    I didn't see the any af:inputfile this time, but the outtext is showing the filerowcount properly. When I click the commandlink, the number changed to 2,3,..... Also in the backing bean newcount and filerowcount is incrementing correctly.
    I know the begin, end attribute means the index of a for loop. So I changed begin="0", it now shows one row of af:inputfile, but when I click the commandlink, no additional rows are shown. (Although the outputtext of filerowcount keeps incrementing as expected.
    So to sum up, the END attribute of af:foreach row CAN pick up the value from the backing bean and render af:inputfile dynamically, but it CANNOT pick up the value from the the field in VAR object of a table.
    Is is a known issue? Or I did something by mistake.
    Is there any other way to add af:inputFile dynamically within each row of table?
    Any advice/comment is appreciated.

    Hi,
    here is how it goes:
    - add an af:inputFile to the column and set its rendered property to point to a managed bean property. The managed bean property has a default value of "false" and the bean should be in viewScope
    - create another variable that holds the row number that should show the inputFile component. This is updated by the command link and evaluated by the get method of the managed bean property controlling the inputFile visibility
    - Define a property name for the table varStatus property
    - For the command link, define a attribute f:attribute with the name rowNumber and set its value to #{varStatusPropertyName.index}
    - define an action listener for the command link
    public void showInputFile(ActionEvent actionEvent){
    int rowNumber = ((RichCommandLink) actionEvent.getSource()).getAttributes().get("varStatusPropertyName");
    //set the value on the internal variable
    - In the getter of the property that defines the render value of the inputFile, use code like this
    public boolean get<whatever name you use>(){
    //access the following EL from Java #{varStatusPropertyName.index}
    int currentRenderedRow = <EL result here>;
    // compare the current row index with the one set by the command link, which is stored in the variable of the managed bean
    if true return true
    else return false
    - Set the PartialTriggers property of the table to point to the commandLink ID so the table is repainted when the command link is pressed
    This should then render the fileInput component for a single row (the one you clicked the command link in)
    Frank

  • A matrix column that shows a field from a linked table

    Hello,
    I'm creating a custom UI form for a UDO of type document.
    This UDO (say FATHER) has one child table (say CHILD). I show its data in a matrix.
    Every line in CHILD links to a sales order line (RDR1).
    In the matrix I'd like to show:
    A) some columns from CHILD (I succeded)
    B) a linked button column that links to ORDR using CHILD.U_OrderEntry (I succeded)
    C) a column that shows RDR1.DocDueDate (how?)
    D) a linked button column that shows RDR1.ItemCode and links to OITM (how?)
    Something similar is done by B1 in pick list standard form (id 85), for instance.
    Can you help me solving issues C and D?
    I guess I should link my CHILD.U_OrderEntry and U_OrderLine with RDR1.DocEntry and LineNum.
    Many thanks!

    Hi Simone,
    I agree, my explanation was partial.
    When I am creating a new form, I'm basing every single piece of the UI on DataTable (I never use DBDataSource and UserDataSources only for Folders). One for the header, one for each Matrix/grid, etc.
    By doing this, it allows me to have the correct layout and validate the UI with the project manager (or the Customer, when this is me the project manager ).
    Then, I am creating the queries, to extract data from the DB exactly as the previously defined DataTables are expecting these data (so, calculating the LineId from the query...).
    And finally, this is the beauty of the design, DataTables allows to to extract (since 2007PL47?) the data from a DataTable as an xml String and to import it in a different DataTable.
    So, to make the full picture, I have a specific DataTable to execute queries, from which I'm extracting the xml definition to load it in the "UI's DataTable". It ends with a matrix.LoadFromDataSource...
    Definitions are staying as defined, querying and loading is sub-second time (depending on your SQL expertise), layout doesn't flicker...
    If you need an excerpt of code (frankly, I'd prefer you to write it with this "how to"), just ask.
    Regards,
    Eric

  • How can I customise Thunderbird message columns to show sender raw address (not display name) and the "Received for" email address that was used to reach me?

    I find it increasingly important to be able to see a sender's actual email address rather than just display name, as they usually don't show a company name - which a domain always would. Is there a way to customise settings/write a script/tweak files to add raw email & domain name columns? When dealing with a number of people at the same company it is hard to order or glance through a list of emails to find them. I also know 2 people with the same name at different companies and it is impossible to distinguish!
    Secondly, as a related column addition, since a number of email aliases reach me it would be useful to have a column to show the "Received..for" part of the message source which reveals the actual email used in the To/CC/BCC which led to me. Again can this be tweaked or scripted?
    I have programming experience but have not made add-ons and would be open to a suggestion which involves creating a custom add-on if adding columns with custom values is possible that way.
    Best Regards,
    Drew

    Extended message headers can be searched from Edit/Find/Search Messages, or the folder context menu, by adding custom headers to the search criteria. So, you might be able to create a search on specific properties of a message.
    The method of adding custom headers to searches is the same as the one described here for filters:
    http://kb.mozillazine.org/Filters_(Thunderbird)#Custom_headers

Maybe you are looking for