Add a field on screen

Hi,
I have to add a field to a standard screen for transaction ie02 under general tab can this be done.
Regards,

hi himanshu,
try the program RSMODPRF, to include field exits.
Regards...
Arun.

Similar Messages

Enhancement for COR1,COR2,COR3 - PPCO0020 - to add custom field on screen

Hello Experts,
My requirement is to add a custom tab and in that a custom field for TCODE COR1. I have done this by creating a project from cmod for enhancement PPCO0020.
Added the custom field to table AUFK and structure CAUFVD. the field name is KDAUF_AUFK1 and on the custom screen created an input field from structure, so the screen field is CAUFVD-KDAUF_AUFK1.
Now when I try to code the Exit EXIT_SAPLCOKO_006 with the below code
E_COCI_AUFK-KDAUF_AUFK1 = KDAUF_AUFK1.
it does not store the data into the table AUFK.
Can any one throw some light on this.
Thanks,
Jaya.

A similar job explained in the document here. IWO10018: User Fields in Maintenance Order Draw clues for your issue from the things mentioned in Step3 of this document for storing the values in the tables. Here tables are equated not fields.

How to add new field to Screen Modifications

Hi,
I want to get P0002-CNAME in screen modifications of Infotype 02. At present i have other 23 fields for which i can set display attributes. This new field is to be added in infotype 02 and also some coding is to be put for this. How this can be achieved ?
One solution is to enhance infotype and add some Z field,but i would like to use the existing structure field.
Please let me know proper way for this.
Thanks.

Hi,
I want to get P0002-CNAME in screen modifications of Infotype 02. At present i have other 23 fields for which i can set display attributes. This new field is to be added in infotype 02 and also some coding is to be put for this. How this can be achieved ?
One solution is to enhance infotype and add some Z field,but i would like to use the existing structure field.
Please let me know proper way for this.
Thanks.

Add field to screen 0311 in SAPMM06E

How do I look to find a screen exit or badi to add a field to screen 0311 in transaction ME42.
Or does anyone know offhand whether it is possible to enhance that screen at all?

use the below enhancement
MM06E005...here u can find the screen exit what u said....
how to find screen exit....
goto smod t.code.
press f4 in enhancement field...
u will get one popup there
     in that give the package name...
     and click the button all selection (which is present near settings and cancel button)
     there u will find checkbox screen exit just click that alone and press enter
here u will find the list of screen exit

Add new fields in CRM_DNO_MONITOR

Hi,
I have a requirement to add new fields to screen of transaction_code CRM_DNO_MONITOR. I found out the badi name "CRM_DNO_MONITOR" which uses interface "IF_CX_CRM_DNO_MONITOR" implemented in class "CL_EX_CRM_DNO_MONITOR".
I tried to debug tcode CRM_DNO_MONITOR to check for which action the methods in the BADI is called, it looks like it is not calling at all and generates the screen.
Please suggest how to add more fields in the screen using this BADI or any other way to add new fields.
Thanks
Prasad

Hi,
This is the blog which explains how to add custom fields for CRM_DNO_MONITOR.
/people/bruyneel.guillaume/blog/2008/06/13/service-desk-implementation-guide-part-ii
Instead of looking or changing the BAdI, you can copy the program of CRM_DNO_MONITOR and modify it.
Please check this thread:
Reg : CRM_DNO_MONITOR
Regards,
Sanjai

Add customer fields in Shopping cart and purchase order

Hi,
I have to add fields(moder of transport, country origin, country destination and more) in Shopping cart and purchase order in SRM system and remotle i have to update the same data in R/3 System.
could you please guide how to add the fields in screen.
regards
Shakeer

Hi
We have done this type of requirement several times in our previous SRM Implementations.
You need to create an Append Structure in the Standard Structure to create the custom fields in your case.
Refer this link below for details.
http://help.sap.com/saphelp_47x200/helpdata/en/cf/21eb61446011d189700000e8322d00/frameset.htm
Define the fields of the append structure. You can proceed as when creating a normal structure with two restrictions (see Creating Structures).
The fields of an append structure must lie in the customer namespace, that is the field names must begin with ZZ or YY. This prevents conflicts with fields inserted in the table by SAP.
http://help.sap.com/saphelp_srm50/helpdata/en/5b/c9df3b6ac34b44e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/28/857a1867b52e4f8472c5d49209a675/frameset.htm
BBP_CUF_BADI_2 BADI will be used to control the properties (hide/unhide, input/output enable or disable) for those customer fields you created in the above append structures.
BBP_DOC_CHANGE_BADI for defaulting or modifying the customer field contents, incase required.
BBP_DOC_CHECK_BADI for issuing customer messages for the customer field contents (incase data is entered incorrectly) , incase required.
Let me know incase you face any issues.
Regards
- Atul

Add Custom Field to VA01

Hi Experts,
I have to add one field to screen in transaction VA01. I have the below details:
Program Name: SAPMV45A
Screen Number where field is tobe added: 8459 ( Its properties says as Subscreen)
I didnot find a enhancement name that include a screen exit for this 8459 screen.
I tried to add field by using SE51 with SAPMV45A / 8459 input and edit screen in screen painter, it allows me adding a field there but I cannot save it as once I enter the transport request for this change, It says "No Task available in transport request" and neither it allows me to create one for this change.
Should it allow me to add the field by directly going through SE51?
I want to know the approach to be used to add a field onto screen 8459 and I already have a corresponding field in VBAP structure.
I have a project created in CMOD but I dont have Enhancement name that contains the screen exit to do the changes. I have searched all exit available via SMOD.
Please help.
Thanks
Kiran

You need to have the SAP access key to modify the screen and add the field which already been added in VBAP using the Append structure in SE11
Thanks,
Babu Kilari

PLz Help me its urgent, how to add new field in mm01 basic data screen

Hi everyone,
plz tell me how to add new field in mm01 basic data screen,i added that field in basic data screen but when i create a material the data for that field will not save in database table.
Thanks,
murali.

Hi Murali,
when created added a field on the screen by using user exit then after that you have add the field in main table where you will be getting these table in the userexit only, please make sure about this. And i am sure defenitly it will get updated in to the table.
reward if useful.
thanks
abdulsamee.

Is it possible to add PERNR field to MIGO or MB1A transaction screens?

Hi,
Ours is a service industry with @ 10000 employees and we have implemented SAP with MM & HR module. We issue uniforms to all the employees when they join (new Joinee) and again once in January every year as reissuance. We intend to keep size information in employee masters in HR along with station code, designation, department and cost centers.
At present we are using two fields goods recipient and unloading point to mention employee code and type of issue (new joinee or reissuance). This is because employee code (PERNR) field is not there in MIGO_GI screen or MB1A screen.
Is it possible to add PERNR field to any of these transaction screens?
If added then we can fetch the relevant information about issuance of information along with station code, designation, department in Z report.
If possible, then how it can be done?
Thanks in advance,
Satish

Hi ,
as i understand we can add new fields in a transaction through user exit /field exit. so please discuss with your ABAP consultant & try to find out all the exit available for MIGO/ MB1A. then you have to decide which one will suit you. here you have to consider some factors like whether you need to enter values in the field or the field needs to fatch any value from any other table & should populate here.
the ABAPer can then write the code & add your required logic here.
i am not very good in this subject. just tried to share what ever i knew.
regards,
anubhab

Is it possible to add a field to OKEK in configuration SCREEN?

Hello SAPPERS,
I would appreciate if someone could provide some input on the following issue.
Is it possible to add a field to Define Account Determination for Internal Goods Movements (OKEK)?
This table determines the GL accounts assigned when inventory is moved between plants. Is it possible to add another column to the left hand side? I would add the receiving plantu2019s VGCd, if possible. Even better would be a profit center group (1100 for all 11xx profit centers for example).
I know there are two ways to add field to the DB Table. They are INCLUDE and APPEND structure.
Is it possible to append a field to table V_T8A00, and display it in config screen OKEK?
Thanks for any advice

Hello,
On a transfer, the accounting treatment is different when the move is within the same division VS when it goes to another division.
When plant 1101 ships to plant 1102, we donu2019t want to post to account 360100. When plant 1101 ships to plant 1301, we do want to post to 360100. Having the receiving profit center group in the mix will enable this distinction.
Thanks in advance

Process to add new field to Account screen and update value from R/3...

We have CRM 7 and just wanted to ask what the process would be to add a new field to the Accounts screen. This field will be a read-only field and we'll source its value from R/3, based on some of the other data entered into the Accounts screen.
What exactly is involved in this process?.
I think I can use the new Application Enhancement Tool instead of EEWB to create the new field, but how does one identify which structure/table to change for say the 'Accounts' data, and, where does one place the code which populates this field, and, once the structure has been changed how do I physically add the field to the screen. I should be okay with reaching out to R/3 and populating the data, code-wise, but again wondered if there was anything inbuilt to do this, bearing in mind the closeness and constant access to R/3 from CRM.
Any help would be much appreciated.
Jason
Edited by: Jason Stratham on Apr 14, 2010 1:11 PM

Jason,
If you use EEWB or AET,, there is nothing manual you have to do, the fields will be added to all related tables and structures plus UI too.
May be sometimes you have to run the UI configration tool to add the field to the UI, again this is just a tool, there is not manual coding required.
you can enter the value for the fields direclty via UI, BUT if it is a display only field, at the time of save, you have to write couple of line to populate this field ( see set_property( ) method in the context node ).
Thats it...
Regards, Sudeep..

Is it possible to add a field in Attachment screen?

Hello Exports,
I wan to know is it possible to add a customer field in Attachment screen (Project, RFx,MA, A) . As there are a lots of attachments added in normal working in various documents like project,MA,RFX etc, so whether can add a field to categorize the attachment like it is project added attachments or RFx add attachment?
Would appreciate your comments.
Thanks & Regards,
David

Hello,
On a transfer, the accounting treatment is different when the move is within the same division VS when it goes to another division.
When plant 1101 ships to plant 1102, we donu2019t want to post to account 360100. When plant 1101 ships to plant 1301, we do want to post to 360100. Having the receiving profit center group in the mix will enable this distinction.
Thanks in advance

Add Custom fields in Report Incident Screen in EHSM

Hello experts,
I want to add custom fields like Notification No. and division in Report Incident screen in EHSM.
I have added two fields.
Business Object: EHHSS_INCIDENT
Node: BASIC_INFO_ALL
Structure: INCL_EEW_EHHSS_INC_BINFA_D (added two fields using append structure)
Now how can i link with my screen and how to fetch notification data (standard F4 help)?
and when i save data, where it will save?
Can you guide me with proper steps for it as i am new in it.
Thanks in advance.

Hi Jayvin,
To add the above fields on the screen, open the component configuration of the required screen.
Enhance the same and add the fields from the respective Node.
You did not worry about saving the data, once the fields are placed on the screen it will get save on click of save/ on event of save.
Regards,
Sanket.

How can i add field to screen exit ?

ver 4.7
trans. me21n
add field in screen exit .
i implement screen exit MM06E005->SAPMM06E->0111
in the layout i try to add field by pressing
button in the toolbar ( dictionary field window ) ,
but when i press "save" in me21n ,
i get message "No data changed".
i choose in the dialog window
field from structure "ci_ekpodb" , field that i already
been add .
thanks .

Hi
You have to implement the exit to import/export the data into/from screen-exit:
EXIT_SAPMM06E_016 and EXIT_SAPMM06E_018
Max

How to add new fields to Profit center screen (KE51)

Dear All,
I have a requirement that to add new fields to the Create Profit center screen KE51.
I couldn't find the user exits for the same.
Please help me in this.
Thanks.
Ravi

Hello Ravi,
I must respcetfully disagree(with other posts) that it is not possible to extend CEPC. In our system we have added an append with two new fields to CEPC. Now, that was the easy part. You must also find a way to maintain those fields when creating and changing profit centres. To do this it was necessary for us to add a button to the create/modify screens. It was also necessary to find a few enhancement spots in order to make this work(and it still is not perfect). I am being very vague here because even though it is posible I would not recommend implementing this solution. It was very time consuming and could be risky if you miss something. There is a reason why you can find so little information in SDN and other places about how to do this. Other, including myself have tried but it was painful.
I know that this does not help very much.
Regards
Greg Kern

Add a field on screen

Similar Messages

Maybe you are looking for