Add a field selection to ldb IMA
Hi friends, could you give a help on this requirement :
I need to add a selection field ( pa_vgsber like IMAK-VGSBER ) to a selection screen of logical database IMA in order to select this field in tcode IMR1. I have tried to create a 'CUST' selection view but it seems that not work for this LDB.
Any reply will be appreciated.
Thanks,
Toubkal
You can create a overflow leader or trailer section that will appear once per page.
Similar Messages
-
How to add a field to the selection screen and when the user enters ...
hi all,
can any one plesase send the code of how to add a field to seletiion screen and when the user enters in the field , it should be store in the database table , the table is MKPF and the field is BKTXT. Thanks.Hi Kripa,
If u r using PNP ldb then the screen u will get is the screen for that ldb and if u want to add some more fields then u define using selection-screen..as follows
SELECTION-SCREEN BEGIN OF BLOCK mysel WITH FRAME TITLE text-111.
PARAMETERS: n_in_en RADIOBUTTON GROUP g1,
q_ev RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF BLOCK mysel.
SELECTION-SCREEN BEGIN OF BLOCK mysel1 WITH FRAME TITLE text-222.
PARAMETERS: r_date TYPE sy-datum DEFAULT sy-datum.
SELECTION-SCREEN END OF BLOCK mysel1.
SELECTION-SCREEN BEGIN OF BLOCK mysel2 WITH FRAME TITLE text-333.
PARAMETERS:f_ver(3) TYPE c DEFAULT 1,
c_no(10) TYPE c DEFAULT '9D0161',
u_id(15) TYPE c,
password(15) TYPE c,
r_email(30) TYPE c DEFAULT PARAMETERS: s_not TYPE c AS CHECKBOX.
PARAMETERS:t_run TYPE c AS CHECKBOX.
SELECTION-SCREEN END OF BLOCK mysel2.
SELECTION-SCREEN BEGIN OF BLOCK mysel3 WITH FRAME TITLE text-444.
SELECTION-SCREEN BEGIN OF BLOCK mysel4 WITH FRAME TITLE text-555.
PARAMETERS: p_ser RADIOBUTTON GROUP g2,
a_ser RADIOBUTTON GROUP g2.
SELECTION-SCREEN END OF BLOCK mysel4.
SELECTION-SCREEN BEGIN OF BLOCK mysel5 WITH FRAME TITLE text-666.
PARAMETERS:p_path TYPE string.
SELECTION-SCREEN END OF BLOCK mysel5.
SELECTION-SCREEN END OF BLOCK mysel3.
u will get this additional screen after the screen of ldb.
I hope this will help u..
Thanks & Regards
Ashu Singh. -
How to add a field in dynamic selections
HI,
There is a requirement in which i need to add a field in existing program of dynamic selections.
I have added a field in the screen.But I was not able to write the label and is not displaying.
I ahve copied evrything from existing coding.but still.
In the program ,Field groups are being used.
I have inserted my field in that header and item of field groups.
But i was not able to select the data based on this selection.
i will attach my code here for reference.
can anyone please help me how to use these filed symbols.
If possible send me the document on Dynamic selections.
the field i need to add is bkpf-bktxt
TABLES:
tcurx,
lfa1,
kna1,
bhdgd,
bkpf,
bseg,
bsega,
b0sg,
fimsg,
sarkey,
t001,
vbset,
sscrfields.
Selektionsparameter *
begin_of_block 1.
PARAMETERS:
par_nbel LIKE rfpdo-bpetnbel, "Normale Belege
par_vbel LIKE rfpdo-epojvbel, "Vorerfaßte Belege
par_sbel LIKE rfpdo-bpetsbel, "Statistischen Belege
par_mbel LIKE rfpdo-epojmbel, "Musterbelege
par_dbel LIKE rfpdo1-korbdbel. "Dauerbuchungsurbelege
end_of_block 1.
begin_of_block 2.
PARAMETERS:
par_summ LIKE rfpdo1-allgsumm, "nur Summenausgabe
par_hkto LIKE rfpdo2-beljhkto, "Hauptbuch- statt Personenkonto
par_altk LIKE rfpdo1-allgaltk, "alternative Kontonummer
par_lsep LIKE rfpdo-allglsep, "Listseparation
par_mikf LIKE rfpdo-allgmikf, "Mikrofiche-Zeile
par_line LIKE rfpdo1-allgline. "Zusatztitel
Eingaben für optische Archivierung
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: arc LIKE rfpdo1-allgarch.
SELECTION-SCREEN COMMENT 3(29) text-103 FOR FIELD arc.
SELECTION-SCREEN POSITION POS_LOW.
PARAMETERS: arc_msg1(10) MODIF ID arc.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION POS_LOW.
PARAMETERS: arc_msg2(10) MODIF ID arc.
SELECTION-SCREEN END OF LINE.
end_of_block 2.
PARAMETERS: arc_mem LIKE arc_params NO-DISPLAY.
Felder und Feldleisten *
CONSTANTS:
con_true TYPE i VALUE 1,
con_false TYPE i VALUE 2,
con_hash TYPE i VALUE 1,
con_vendor TYPE c VALUE 'K',
con_cust TYPE c VALUE 'D'.
Global Data
DATA: BEGIN OF hash_totals OCCURS 25,
bukrs LIKE t001-bukrs,
poper(7),
dramt LIKE bseg-wrbtr,
cramt LIKE bseg-wrbtr,
END OF hash_totals.
DATA:
factor TYPE i,
Zähler
cnt_bukrs(4) TYPE p, "Anzahl Buchungskreise
cnt_max LIKE sy-tfill, "Maximum der CNT_Ti
cnt_t0 LIKE sy-tfill, "Anzahl Einträge in Ti
cnt_t1 LIKE sy-tfill,
cnt_t2 LIKE sy-tfill,
cnt_t3 LIKE sy-tfill,
cnt_t4 LIKE sy-tfill,
cnt_t5 LIKE sy-tfill,
Fehler
err_altkt(1) TYPE c, "alt. Kontonummer nicht gefunden
Flags
flg_section TYPE i,
flg_vendr2 TYPE i,
flg_vendr3 TYPE i,
flg_color(1) TYPE n, "0 - intensified off
Hilfsfelder
hlp_belnr(10) TYPE c, "Anzeigefeld Belegnummer
hlp_bstat LIKE bkpf-bstat, "Status vorerfaßter Belege
hlp_buper(7) TYPE c, "Buchungsperiode mit '/'
hlp_null(1) TYPE p VALUE 0, "Betrag Null
hlp_sakan LIKE ska1-sakan, "Anzeigefeld Kontonummer
hlp_wrshb(26) TYPE c, "FW-Betrag mit Währung in Klammer
hlp_vnd_amt(43) TYPE c,
Texte
txt_line0(132) TYPE c, "Überschriften
txt_line1(132) TYPE c,
txt_line2(132) TYPE c,
txt_line(132) TYPE c, "Hilfstext
Feldleisten
BEGIN OF mikfi, "Information Mikrofiche-Zeile
bstat LIKE bkpf-bstat,
bukrs LIKE bkpf-bukrs,
gjahr LIKE bkpf-gjahr,
belnr LIKE bkpf-belnr,
END OF mikfi.
Interne Tabellen *
DATA:
Belegkopfinformationen
BEGIN OF t0 OCCURS 4, "0 - allgemeine Angaben
info(1) TYPE n, "1 - vorerfaßter Beleg
END OF t0, "2 - Referenz
"3 - Storno
"4 - gelöschter vorerfaßter Beleg
"5 - ersetzter vorerfaßter Beleg
"6 - Ausgleichsbeleg
"7 - zurückgenommener Ausgleich
Personenkonteninformationen je Beleg
BEGIN OF t1 OCCURS 10,
koart LIKE bseg-koart, "Kontoart
ktonr LIKE bseg-kunnr, "Kontonummer(Debitor/Kreditor)
bschl LIKE bseg-bschl, "Buchungsschlüssel
xnegp LIKE bseg-xnegp, "Negativbuchung
umskz LIKE bseg-umskz, "Sonderumsatzkennzeichen
zlspr LIKE bseg-zlspr, "Payment Block Key - CR 21709
dmshb LIKE bsega-dmshb, "Soll-Haben Betrag in Hauswährung
wrshb LIKE bsega-dmshb, "Betrag in Fremdwährung
xfwae(1) TYPE c, "X - Fremdwährungsinformation
name1 LIKE lfa1-name1, "Customer/ Vendor Name
END OF t1,
Steuerinformationen je Beleg
BEGIN OF t2 OCCURS 10,
mwskz LIKE bseg-mwskz, "Mehrwertsteuerkennzeichen
dmshb LIKE bsega-dmshb, "Soll-Haben Betrag in Hauswährung
END OF t2,
Sachkonteninformationen je Beleg
BEGIN OF t3 OCCURS 20,
mwskz LIKE bseg-mwskz, "Mehrwertsteuerkennzeichen
bschl LIKE bseg-bschl, "Buchungsschlüssel
xnegp LIKE bseg-xnegp, "Negativbuchung
koart LIKE bseg-koart, "Kontoart
hkont LIKE bseg-hkont, "Hauptbuchkonto
dmshb LIKE bsega-dmshb, "Soll-Haben Betrag in Hauswährung
kostl LIKE bseg-kostl, "Cost Center
prctr LIKE bseg-prctr, "Profit Center
END OF t3,
Sonderhauptbuchbeträge für Debitoren (nur Ausgabe)
BEGIN OF t4 OCCURS 5,
umskz LIKE bseg-umskz, "Sonderumsatzkennzeichen
dmsol(9) TYPE p, "Soll-Betrag Hauswährung
dmhab(9) TYPE p, "Haben-Betrag Hauswährung
END OF t4,
Sonderhauptbuchbeträge für Kreditoren (nur Ausgabe)
BEGIN OF t5 OCCURS 5,
umskz LIKE bseg-umskz, "Sonderumsatzkennzeichen
dmsol(9) TYPE p, "Soll-Betrag Hauswährung
dmhab(9) TYPE p, "Haben-Betrag Hauswährung
END OF t5,
Summeninformationen je Buchungskreis
BEGIN OF tbukrs OCCURS 20,
bstat LIKE bkpf-bstat, "Belegstatus
bukrs LIKE bkpf-bukrs, "Buchungskreis
START OF CHANGE FOR CR63816 by OS0794 on 01/29/2008
bktxt LIKE bkpf-bktxt,
END OF CHANGE FOR CR63816 by OS0794 on 01/29/2008
gjahr LIKE bkpf-gjahr, "Buchungsjahr
monat LIKE bkpf-monat, "Buchungsmonat
dmsol(9) TYPE p, "Soll-Betrag Hauswährung
dmhab(9) TYPE p, "Haben-Betrag Hauswährung
waers LIKE t001-waers, "Währungsschlüssel (nur Ausgabe)
END OF tbukrs,
Sonderhauptbuchinformationen je Buchungskreis
BEGIN OF tbukrs_u OCCURS 20,
bstat LIKE bkpf-bstat, "Belegstatus
bukrs LIKE bkpf-bukrs, "Buchungskreis
START OF CHANGE FOR CR63816 by OS0794 on 01/29/2008
bktxt LIKE bkpf-bktxt,
END OF CHANGE FOR CR63816 by OS0794 on 01/29/2008
gjahr LIKE bkpf-gjahr, "Buchungsjahr
monat LIKE bkpf-monat, "Buchungsmonat
koart LIKE bseg-koart, "Kontoart
umskz LIKE bseg-umskz, "Sonderumsatzkennzeichen
dmsol(9) TYPE p, "Soll-Betrag Hauswährung
dmhab(9) TYPE p, "Haben-Betrag Hauswährung
waers LIKE t001-waers, "Währungsschlüssel (nur Ausgabe)
END OF tbukrs_u,
Summeninformationen je Hauswährung
BEGIN OF twaers OCCURS 10,
bstat LIKE bkpf-bstat, "Belegstatus
waers LIKE t001-waers, "Hauswährungsschlüssel
gjahr LIKE bkpf-gjahr, "Buchungsjahr
monat LIKE bkpf-monat, "Buchungsmonat
dmsol(9) TYPE p, "Soll-Betrag Hauswährung
dmhab(9) TYPE p, "Haben-Betrag Hauswährung
END OF twaers,
Sonderhauptbuchinformationen je Hauswährung
BEGIN OF twaers_u OCCURS 20,
bstat LIKE bkpf-bstat, "Belegstatus
waers LIKE t001-waers, "Währungsschlüssel
gjahr LIKE bkpf-gjahr, "Buchungsjahr
monat LIKE bkpf-monat, "Buchungsmonat
koart LIKE bseg-koart, "Kontoart
umskz LIKE bseg-umskz, "Sonderumsatzkennzeichen
dmsol(9) TYPE p, "Soll-Betrag Hauswährung
dmhab(9) TYPE p, "Haben-Betrag Hauswährung
END OF twaers_u,
Fehlerprotokoll im Batch
BEGIN OF tfimsg OCCURS 10.
INCLUDE STRUCTURE fimsg.
DATA END OF tfimsg.
Strukturen für optische Archivierung *
DATA BEGIN OF info OCCURS 10.
INCLUDE STRUCTURE bhinf.
DATA END OF info.
DATA:
arc_save LIKE arc_params,
arc_valid.
Feldgruppen *
FIELD-GROUPS: header, daten.
INSERT:
bkpf-bukrs "Buchungskreis
bkpf-bktxt "Change by OS0794
bkpf-bstat "Belegstatus
bkpf-gjahr "Geschäftsjahr
bkpf-belnr "Belegnummer
bseg-buzei "Buchungszeile
INTO header.
INSERT
bkpf-blart "Belegart
bkpf-bktxt "Change by OS0794
bkpf-budat "Buchungsdatum
bkpf-stblg "Stornobelegnummer
bkpf-waers "Währungsschlüssel
bkpf-xblnr "Referenzangabe
bseg-bschl "Buchungsschlüssel
bseg-xnegp "Negativbuchung
bseg-zlspr "Payment Block Key - CR 21709
bseg-hkont "Hauptbuchkonto
bseg-koart "Kontoart
bseg-kunnr "Debitornummer
bseg-lifnr "Kreditornummer
bseg-mwart "Mehrwertsteuerart (A oder V)
bseg-mwskz "Mehrwertsteuerkennzeichen
bseg-umskz "Sonderhauptbuch-Kennzeichen
bsega-dmshb "S/H-Betrag in Hauswährung
bsega-mdshb "Umsatzsteuerbetrag in Hauswährg
bsega-wrshb "S/H-Betrag in Fremdwährung
hlp_bstat "Status vorerfaßter Belege bzw.
bseg-kostl
bseg-prctr
bkpf-monat
INTO daten. "Status von Belegen ohne Zeilen
Vorschlagswerte *
INITIALIZATION.
get_frame_title: 1,2.
par_nbel = 'X'.
par_sbel = space.
par_mbel = space.
par_dbel = space.
par_vbel = 'X'.
Archivinformationen nur fuer Ausgabe *
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF screen-group1 = 'ARC'.
screen-input = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Prüfung und Korrektur der eingegebenen Daten *
AT SELECTION-SCREEN ON arc.
IF arc <> ' ' AND arc_mem(20) = space.
CALL FUNCTION 'GET_ARCHIVE_PARAMETERS'
EXPORTING
in_parameters = arc_save
printer = ' '
IMPORTING
out_parameters = arc_mem
valid = arc_valid
EXCEPTIONS
OTHERS = 04.
IF arc_valid <> 'X' OR arc_mem = space.
CLEAR arc_mem.
MESSAGE e999 WITH text-102.
ENDIF.
arc_msg1 = arc_mem(10).
arc_msg2 = arc_mem+10(10).
ENDIF.
IF arc = ' '.
CLEAR arc_mem.
arc_msg1 = arc_msg2 = space.
ENDIF.
arc_save = arc_mem.
AT SELECTION-SCREEN ON arc_msg1.
arc_msg1 = arc_mem(10).
AT SELECTION-SCREEN ON arc_msg2.
arc_msg2 = arc_mem+10(10).
AT SELECTION-SCREEN.
IF par_nbel EQ space AND
par_mbel EQ space AND
par_dbel EQ space AND
par_sbel EQ space AND
par_vbel EQ space.
SET CURSOR FIELD 'PAR_NBEL'.
MESSAGE e111.
ENDIF.
optische Archivierung
IF arc <> ' ' AND par_mikf <> ' '.
CLEAR arc_mem.
MESSAGE e999 WITH text-100.
ENDIF.
IF arc <> ' ' AND par_lsep <> ' '.
CLEAR arc_mem.
MESSAGE e999 WITH text-101.
ENDIF.
IF arc = 'X' AND sscrfields-ucomm = 'PRIN'.
sscrfields-ucomm = 'ONLI'.
sy-pdest = 'LP01'. "wegen Abfrage in Batch-Heading
ENDIF.
Vorbelegungen *
START-OF-SELECTION.
bhdgd-lines = sy-linsz.
bhdgd-repid = sy-repid.
bhdgd-uname = sy-uname.
bhdgd-separ = par_lsep.
bhdgd-domai = 'BUKRS'.
IF arc = 'X'.
bhdgd-miffl = 'A'.
ENDIF.
IF par_mikf = 'X'.
bhdgd-miffl = 'X'.
ENDIF.
Initialisierung für optisches Archiv
PERFORM open_archive(rsbtchh0) USING arc_mem.
info-name = 'BKPF-BSTAT'. info-len = space. APPEND info.
info-name = 'BKPF-BUKRS'. info-len = space. APPEND info.
info-name = 'BSEG-GJAHR'. info-len = space. APPEND info.
info-name = 'BKPF-BELNR'. info-len = space. APPEND info.
info-name = 'BKPF-BKTXT'. info-len = space. APPEND info.
PERFORM start_archive(rsbtchh0) TABLES info.
b0sg-xstan = par_nbel.
b0sg-xstam = par_mbel.
b0sg-xstad = par_dbel.
b0sg-xstas = par_sbel.
b0sg-xstaa = 'X'.
IF par_vbel EQ 'X'.
b0sg-xstav = 'Z'.
ENDIF.
Selektion *
GET bkpf FIELDS blart bstat budat monat stblg waers xblnr bktxt.
CLEAR hlp_bstat.
IF 'ABVWZ' CA bkpf-bstat.
hlp_bstat = bkpf-bstat.
CLEAR bkpf-bstat.
IF 'ABWZ' CA hlp_bstat.
CLEAR: bseg, bsega.
IF par_summ EQ space.
EXTRACT daten.
ENDIF.
PERFORM summe_merken.
ENDIF.
ENDIF.
GET bseg.
IF par_summ EQ space.
EXTRACT daten.
ENDIF.
PERFORM summe_merken.
GET bkpf LATE.
PERFORM vorerfasste_steuer_merken.
Seitenkopf *
TOP-OF-PAGE.
PERFORM batch-heading(rsbtchh0).
ULINE.
IF flg_section <> con_hash.
FORMAT COLOR 1 INTENSIFIED OFF.
WRITE / txt_line0.
ULINE.
FORMAT COLOR 1 INTENSIFIED.
WRITE: / txt_line1,
/ txt_line2.
ELSE.
FORMAT COLOR 1 INTENSIFIED OFF.
WRITE: / sy-vline NO-GAP,
'Hash Totals'(205),
132 sy-vline.
ULINE.
FORMAT COLOR 1 INTENSIFIED.
WRITE: / sy-vline NO-GAP,
(10) 'CoCd'(200),
(07) 'Period'(201),
sy-vline,
(16) 'Debit Amount'(202),
(16) 'Credit Amount'(203),
sy-vline,
(16) 'Total'(204).
ENDIF.
ULINE.
Sortieren der Daten *
END-OF-SELECTION.
DESCRIBE TABLE tbukrs LINES sy-tfill.
IF sy-tfill EQ 0.
CALL FUNCTION 'POPUP_NO_LIST'.
ENDIF.
SORT.
SORT tbukrs.
Belegjournal *
LOOP.
*-- Neuer Buchungskreis -
AT NEW bkpf-bukrs.
SELECT SINGLE * FROM t001 WHERE bukrs EQ bkpf-bukrs.
IF sy-subrc NE 0.
IF sy-batch EQ space.
MESSAGE a101 WITH bkpf-bukrs.
ELSE.
MESSAGE s101 WITH bkpf-bukrs.
STOP.
ENDIF.
ENDIF.
bhdgd-bukrs = bkpf-bukrs.
bhdgd-werte = bkpf-bukrs.
PERFORM new-section(rsbtchh0).
PERFORM titel_fuellen USING '5'.
ENDAT.
*-- Neuer Belegstatus -
AT NEW bkpf-bstat.
PERFORM new_page USING bkpf-bstat.
flg_color = 1.
ENDAT.
*-- Neue Belegnummer -
AT NEW bkpf-belnr.
REFRESH: t0, t1, t2, t3.
PERFORM belegkopf_merken.
mikfi-bstat = bkpf-bstat.
mikfi-bukrs = bkpf-bukrs.
mikfi-gjahr = bkpf-gjahr.
mikfi-belnr = bkpf-belnr.
bhdgd-grpin = mikfi.
ENDAT.
*-- Belegzeile -
PERFORM belegzeile_merken.
*-- Ende einer Belegnummer -
AT END OF bkpf-belnr.
PERFORM beleg_schreiben.
ULINE.
ENDAT.
*-- Ende eines Buchungskreises -
AT END OF bkpf-bukrs.
PERFORM titel_fuellen USING '4'.
PERFORM buchungskreis_schreiben USING bkpf-bukrs.
ENDAT.
ENDLOOP.
Summenblätter *
bhdgd-bukrs = ' '.
bhdgd-werte = ' '.
PERFORM new-section(rsbtchh0).
PERFORM titel_fuellen USING '4'.
PERFORM buchungskreis_schreiben USING ' '.
PERFORM hauswaehrung_schreiben.
Print Hash Totals *
flg_section = con_hash.
NEW-PAGE.
PERFORM prt_hash TABLES hash_totals.
Fehlerprotokoll *
CALL FUNCTION 'FI_MESSAGE_CHECK'
EXCEPTIONS
no_message = 4.
IF sy-subrc = 0.
IF sy-batch EQ space.
PERFORM titel_fuellen USING '6'.
NEW-PAGE.
FORMAT COLOR 6 INTENSIFIED.
CALL FUNCTION 'FI_MESSAGE_SORT'.
CALL FUNCTION 'FI_MESSAGE_PRINT'
EXPORTING
i_xskip = 'X'.
ELSE.
CALL FUNCTION 'FI_MESSAGE_GET'
TABLES
t_fimsg = tfimsg.
LOOP AT tfimsg.
MESSAGE ID tfimsg-msgid TYPE tfimsg-msgty NUMBER tfimsg-msgno
WITH tfimsg-msgv1 tfimsg-msgv2 tfimsg-msgv3 tfimsg-msgv4.
ENDLOOP.
ENDIF.
ENDIF.
U N T E R P R O G R A M M E *
0. TITEL_FUELLEN *
1. NEW_PAGE *
2. SUMME_MERKEN *
3. VORERFASSTE_STEUER_MERKEN *
4. BELEGKOPF_MERKEN *
5. BELEGZEILE_MERKEN *
6. BELEG_SCHREIBEN *
7. BUCHUNGSKREIS_SCHREIBEN *
8. HAUSWAEHRUNG_SCHREIBEN *
9. SUMMENZEILE_SCHREIBEN *
10. KONTONUMMER *
0. FORM TITEL_FUELLEN *
Ersetzt das Global &CCCU durch die Buchungskreiswährung *
F00_TEXT ist 4, 5 oder 6, je nach Gruppe der Textelemente *
FORM titel_fuellen USING f00_text.
DATA:
BEGIN OF txt_502,
T1(49) TYPE C, "CR 21709
W1(23) TYPE C, "CR 21709
t1(50) TYPE c, "CR 21709
w1(22) TYPE c, "CR 21709
t2(6) TYPE c,
w2(15) TYPE c,
t3(21) TYPE c,
w3(16) TYPE c,
t4(2) TYPE c,
END OF txt_502.
CASE f00_text. "Textelemente
WHEN '4'. "- für die Summenliste
txt_line0 = text-400.
txt_line1 = text-401.
txt_line2 = text-402.
WHEN '5'. "- für die Einzelpostenliste
txt_line0 = text-500.
txt_line1 = text-501.
txt_line2 = text-502.
IF par_hkto EQ 'X'.
txt_line1+33(10) = text-505.
txt_line2+33(10) = text-506.
ENDIF.
txt_502 = txt_line2.
REPLACE '&CCCU' WITH t001-waers INTO:
txt_502-w1, txt_502-w2, txt_502-w3.
CONDENSE:
txt_502-w1, txt_502-w2, txt_502-w3.
WRITE:
txt_502-w1 TO txt_502-w1 RIGHT-JUSTIFIED,
txt_502-w2 TO txt_502-w2 RIGHT-JUSTIFIED,
txt_502-w3 TO txt_502-w3 RIGHT-JUSTIFIED.
txt_line2 = txt_502.
WHEN '6'. "- für die Fehlerliste
txt_line0 = text-600.
txt_line1 = text-601.
txt_line2 = space.
WHEN OTHERS. "- initialisieren
txt_line0 = space.
txt_line1 = space.
txt_line2 = space.
ENDCASE.
ENDFORM. "TITEL_FUELLEN
1. FORM NEW_PAGE *
Initialisierungen für BATCH-HEADING Routine *
F01_BSTAT steuert den Aufbau des Reporttitels *
FORM new_page USING f01_bstat.
CASE f01_bstat. "Reporttitel
WHEN 'D'. "- für Dauerbuchungsurbelege
bhdgd-line1 = text-001.
WHEN 'M'. "- für Musterbelege
bhdgd-line1 = text-002.
WHEN 'S'. "- für statistische Belege
bhdgd-line1 = text-003.
WHEN OTHERS. "- für normale/vorerfaßte Belege
bhdgd-line1 = sy-title.
ENDCASE.
bhdgd-line2 = par_line.
bhdgd-inifl = 0.
NEW-PAGE.
ENDFORM. "NEW_PAGE
2. FORM SUMME_MERKEN *
Merken der Summeninformation *
FORM summe_merken.
CLEAR tbukrs.
tbukrs-bstat = bkpf-bstat.
tbukrs-bukrs = bkpf-bukrs.
tbukrs-bktxt = bkpf-bktxt.
tbukrs-gjahr = bkpf-gjahr.
tbukrs-monat = bkpf-monat.
tbukrs-dmsol = bsega-dmsol.
tbukrs-dmhab = bsega-dmhab.
IF 'DK' CA bseg-koart.
MOVE-CORRESPONDING tbukrs TO tbukrs_u.
tbukrs_u-koart = bseg-koart.
tbukrs_u-umskz = bseg-umskz.
tbukrs_u-dmsol = bsega-dmsol.
tbukrs_u-dmhab = bsega-dmhab.
COLLECT tbukrs_u.
tbukrs_u-monat = 0. "Summe für das Geschäftsjahr
COLLECT tbukrs_u.
ENDIF.
COLLECT tbukrs.
ENDFORM. "SUMME_MERKEN
3. FORM VORERFASSTE_STEUER_MERKEN *
Nachlesen der Steuerzeilen vorerfaßter Belege *
Gefüllt wird TBUKRS und der Extrakt *
FORM vorerfasste_steuer_merken.
CHECK hlp_bstat EQ 'V'.
SELECT * FROM vbset
WHERE ausbk EQ bkpf-bukrs
AND belnr EQ bkpf-belnr
AND gjahr EQ bkpf-gjahr.
CHECK vbset-hwste NE 0.
CLEAR: bseg, bsega.
bseg-koart = 'S'.
bseg-mwart = 'V'. "oder 'A', nur zum Füllen von T2
bseg-mwskz = vbset-mwskz.
IF vbset-shkzg EQ 'S'.
bsega-dmsol = vbset-hwste.
bsega-dmshb = vbset-hwste.
ELSE.
bsega-dmhab = vbset-hwste.
bsega-dmshb = - vbset-hwste.
ENDIF.
IF par_summ EQ space.
EXTRACT daten.
ENDIF.
PERFORM summe_merken.
ENDSELECT.
ENDFORM. "VORERFASSTE_STEUER_MERKEN
4. FORM BELEGKOPF_MERKEN *
Je Beleg werden gefüllt: *
T0 - Informationsflag *
FORM belegkopf_merken.
t0-info = 0. "Belegkopf
APPEND t0.
CASE hlp_bstat.
WHEN 'A'.
t0-info = 6. "Ausgleichsbeleg
APPEND t0.
WHEN 'B'.
t0-info = 7. "zurückgen. Ausgleichsbeleg
APPEND t0.
WHEN 'V'.
t0-info = 1. "vorerfaßter Beleg
APPEND t0.
WHEN 'W'.
t0-info = 5. "ersetzter vorerfaßter Beleg
APPEND t0.
WHEN 'Z'.
t0-info = 4. "gelöschter vorerfaßter Beleg
APPEND t0.
ENDCASE.
IF bkpf-xblnr NE space AND hlp_bstat NA 'BWZ'.
t0-info = 2. "Referenz
APPEND t0.
ENDIF.
IF bkpf-stblg NE space.
t0-info = 3. "Storno
APPEND t0.
ENDIF.
SORT t0.
ENDFORM. "BELEGKOPF_MERKEN
5. FORM BELEGZEILE_MERKEN *
Je Beleg werden gefüllt: *
T1 - Personenkonteninformation *
T2 - Steuerinformation (nicht bei vorerfaßten Belegen) *
T3 - Sachkonteninformation *
FORM belegzeile_merken.
Vendors/ Customers
IF bseg-koart CA 'DK'.
t1-koart = bseg-koart.
IF par_hkto EQ 'X'.
t1-ktonr = bseg-hkont.
ELSEIF bseg-koart EQ 'K'.
t1-ktonr = bseg-lifnr.
ELSE.
t1-ktonr = bseg-kunnr.
ENDIF.
t1-bschl = bseg-bschl.
t1-umskz = bseg-umskz.
t1-xnegp = bseg-xnegp.
t1-zlspr = bseg-zlspr. "CR 21709
t1-dmshb = bsega-dmshb.
t1-wrshb = bsega-wrshb.
t1-xfwae = space.
APPEND t1.
Read the vendor description.
IF bseg-koart = con_vendor.
flg_vendr2 = con_true.
flg_vendr3 = con_true.
CLEAR lfa1-name1.
SELECT SINGLE name1
INTO lfa1-name1
FROM lfa1
WHERE lifnr = bseg-lifnr.
ELSEIF bseg-koart = con_cust.
CLEAR kna1-name1.
SELECT SINGLE name1
INTO kna1-name1
FROM kna1
WHERE kunnr = bseg-kunnr.
ENDIF.
IF bkpf-waers EQ t001-waers.
CLEAR t1.
ENDIF.
t1-xfwae = 'X'.
t1-name1 = lfa1-name1.
IF t1-name1 IS INITIAL.
t1-name1 = kna1-name1.
ENDIF.
APPEND t1.
CLEAR:
kna1-name1,
lfa1-name1.
CLEAR t1.
Save the hash total amounts
CLEAR tcurx-currdec.
SELECT SINGLE currdec
INTO tcurx-currdec
FROM tcurx
WHERE currkey = bkpf-waers.
IF tcurx-currdec = 1.
factor = 10.
ELSE.
factor = 100.
ENDIF.
CLEAR hash_totals.
hash_totals-bukrs = bkpf-bukrs.
CONCATENATE bkpf-monat '/' bkpf-gjahr INTO hash_totals-poper.
IF bsega-wrshb < 0.
hash_totals-cramt = bsega-wrshb * factor.
ELSE.
hash_totals-dramt = bsega-wrshb * factor.
ENDIF.
COLLECT hash_totals.
Tax accounts
ELSEIF bseg-mwart CA 'AV'.
t2-mwskz = bseg-mwskz.
t2-dmshb = bsega-dmshb.
APPEND t2.
IF flg_vendr2 = con_true.
flg_vendr2 = con_false.
CLEAR t2.
APPEND t2.
ENDIF.
GL Accounts
ELSEIF hlp_bstat NA 'ABWZ'.
t3-mwskz = bseg-mwskz.
t3-bschl = bseg-bschl.
t3-xnegp = bseg-xnegp.
t3-koart = bseg-koart.
t3-hkont = bseg-hkont.
t3-dmshb = bsega-dmshb.
APPEND t3.
IF flg_vendr3 = con_true
OR NOT bseg-kostl IS INITIAL
OR NOT bseg-prctr IS INITIAL.
flg_vendr3 = con_false.
CLEAR t3.
t3-kostl = bseg-kostl.
t3-prctr = bseg-prctr.
APPEND t3.
CLEAR t3.
ENDIF.
ENDIF.
ENDFORM. "BELEGZEILE_MERKEN
6. FORM BELEG_SCHREIBEN *
Ausgabe der Belginformationen *
FORM beleg_schreiben.
DATA:
len TYPE i.
Berechnung der benötigten Zeilen pro Beleg
DESCRIBE TABLE:
t0 LINES cnt_t0,
t1 LINES cnt_t1,
t2 LINES cnt_t2,
t3 LINES cnt_t3.
cnt_max = cnt_t0.
IF cnt_max LT cnt_t1.
cnt_max = cnt_t1.
ENDIF.
IF cnt_max LT cnt_t2.
cnt_max = cnt_t2.
ENDIF.
IF cnt_max LT cnt_t3.
cnt_max = cnt_t3.
ENDIF.
ADD 1 TO cnt_max.
IF cnt_max LE 10.
RESERVE cnt_max LINES.
ELSE.
RESERVE 5 LINES.
ENDIF.
SUBTRACT 1 FROM cnt_max.
Farbe setzen
IF flg_color EQ 0.
FORMAT COLOR 2 INTENSIFIED OFF.
flg_color = 1.
ELSE.
FORMAT COLOR 2 INTENSIFIED.
flg_color = 0.
ENDIF.
Index fuer optische Archivierung
PERFORM new-group(rsbtchh0).
DO cnt_max TIMES.
Belegkopfinformationen
WRITE /1 sy-vline NO-GAP.
IF sy-index LE cnt_t0.
READ TABLE t0 INDEX sy-index.
CASE t0-info.
WHEN 0. "Belegkopf
hlp_belnr = bkpf-belnr. "Belegnr. mit führenden Nullen
Referenz auf Originalbeleg
PERFORM start_doc_reference(rsbtchh0)
USING bkpf-bukrs bkpf-belnr bkpf-gjahr bkpf-bktxt. " change*
WRITE:
bkpf-bukrs,
hlp_belnr,
bkpf-blart,
bkpf-budat DD/MM/YYYY.
Ende der Referenz auf Originalbeleg
PERFORM end_doc_reference(rsbtchh0).
WHEN 1. "Vorerfaßter Beleg
WRITE:
(29) text-507.
WHEN 2. "Referenz
WRITE:
(12) text-503,
bkpf-xblnr.
WHEN 3. "Storno
WRITE:
(12) text-504,
bkpf-stblg.
WHEN 4. "Gelöschter vorerfaßter Beleg
WRITE:
(29) text-507,
(40) text-508.
WHEN 5. "Ersetzter vorerfaßter Beleg
txt_line = text-509.
REPLACE:
'&BLN' WITH bkpf-xblnr(10) INTO txt_line,
'&GJR' WITH bkpf-xblnr+10 INTO txt_line.
WRITE:
(29) text-507,
(40) txt_line.
WHEN 6. "Ausgleichsbeleg
WRITE: "
(29) text-510. "
WHEN 7. "zurückgen. Ausgleichsbeleg
WRITE: "
(29) text-511. "
ENDCASE.
ENDIF.
Personenkonteninformationen
Subledger Account Information
WRITE 31(1) sy-vline NO-GAP.
Internal tables T0 - T5 hold data for each section.
IF sy-index LE cnt_t1.
READ TABLE t1 INDEX sy-index.
IF par_hkto EQ 'X'.
PERFORM kontonummer USING t1-ktonr hlp_sakan.
ELSE.
hlp_sakan = t1-ktonr.
ENDIF.
IF t1-xfwae EQ space.
IF t1-xnegp = 'X'.
t1-xnegp = '-'.
ENDIF.
Write the vendor number.
WRITE: t1-koart,
hlp_sakan,
t1-bschl NO-GAP.
IF t1-umskz IS INITIAL.
WRITE: t1-xnegp NO-GAP,
t1-umskz.
ELSE.
WRITE: t1-umskz NO-GAP,
t1-xnegp.
ENDIF.
WRITE: t1-zlspr. "CR 21709 / 23588
WRITE: (22) t1-dmshb CURRENCY t001-waers.
ELSE.
Write the document currency, amount and the
vendor/ customerHi,
Please see documentation of enhancement MM06E005 (transaction SMOD).
Userexit EXIT_SAPMM06E_016 is a component of enhancement MM06E005.
With that enhancement, you can
- Maintain/supply your own customer fields
- Update your own customer-specific tables
You cannot:
- Change standard fields
- Change data that depends on the document header in the items
- Change data that depends on an item in the document header
Please have a look at Business Add-In (BAdI) ME_PROCESS_PO_CUST.
Regards,
Edit -
How to Add a new Selection Field in COPA Report
Hi Gurus
I'm new on SAP COPA reporting and I don't know how to solve this problem.
I need add a new Selection-screen field (char1), not connected with any characteristic.
This is necessary becuase if the user flag this field, when teh report is running I'll replace some key-figure values using the EXIT
ZXYEXF05. I don't find any instruction how to define this simple kinfd of variable, and use it into a Report.
Thank-you in advance for your help.
ClaudioHi
I'll try to explain better my need.
I've 10 CO-PA Key-Figures used to Split in the Cost of a material in different Cost Items.
Using the customizing I fill these key-figures using some rules.
The new requirement is use SOMETIME the same KF, by displaying different Costs overwritting the original values using the exit ZXYEXF05. But I need to know when the user wants consider the original value of KF, and when he wants overwrite these values (when I have to run teh exit). So I thought to create a new Selection-screen field (Char1), to permit to the user to pass to some report this user request. I thought to define a global variable, and add it to several reports when this feature is required.
Can you suggest a better solution ???
I could create some empty KF and fill them using teh exit, but I would prefer not expand the CO-PA structure.
Thanks for help.
Claudio -
Add new field infotype "z" in logical database selection screen pnp
Can add new field infotype "z" in logical database selection screen pnp
I could explain how to realize
ThanksIn case to somebody it interests to him: TO EXTEND SCREEN OF SELECTION WITH OPTIONAL DELIMITERS The case that can be given in a screen of selection of a logical data base it does not appear a certain field that we need in the filter, the steps that will be due to follow are the following:
u2022 To create a view of selection in agreement with the fields that we want to show To review the following Link http://help.sap.com/saphelp_46c/helpdata/es/6e/6ed638e70ef679e10000000a114084/content.htm u2022 To assign the view of selection to a class of report
u2022 In the code of report to create select option in the selection screen that allows to introduce imput to leak and after start-of-selection to put the following code,
"Allocation operative area to optional delimiter
IF NOT p_aroper IS INITIAL.
DATA: lt_texpr TYPE rsds_expr OCCURS 0 WITH HEADER LINE,
wa_texpr TYPE rsds_expr,
lt_rsds_expr_tab LIKE rsdsexpr OCCURS 10 WITH HEADER LINE,
wa_rsds_expr_tab LIKE rsdsexpr.
REFRESH lt_rsds_expr_tab.
wa_rsds_expr_tab-arity = '0'.
wa_rsds_expr_tab-fieldname = 'OBJID'.
wa_rsds_expr_tab-option = 'EQ'.
wa_rsds_expr_tab-low = p_aroper.
wa_rsds_expr_tab-high = '00000000'.
MOVE-CORRESPONDING wa_rsds_expr_tab TO lt_rsds_expr_tab.
APPEND lt_rsds_expr_tab.
REFRESH lt_texpr.
wa_texpr-tablename = 'PA9004'.
wa_texpr-expr_tab[] = lt_rsds_expr_tab[].
MOVE-CORRESPONDING wa_texpr TO lt_texpr.
APPEND lt_texpr.
pnpdynse[] = lt_texpr[].
ENDIF.
English is the forum language.
Edited by: Rob Burbank on May 18, 2011 11:41 AM -
Need to add more field in the selection screen in tcode crm_dno_monitor
Hi,
In the transaction code crm_dno_monitor, i need to add extra fields in selection screen. Do we have any way to add fields in the standard tcode crm_dno_monitor.
Thanks
PrasadIf you need to add 5 fields on ticket screen then use EEWB enhancement.
The ticket screen transaction is crmd_order which even opens up after you double click the ticket no from crm_dno_monitor report list.
for crm_dno_monitor you can have the BADI CRM_DNO_MONITOR which will add later the column for the fields which you can add using EEWB
Check the following blog which guide you for custom field creation using EEWB
/people/bruyneel.guillaume/blog/2008/06/13/service-desk-implementation-guide-part-ii -
Transaction DP97: Need to add 2 fields on selection screen...
Hi,
I am using ECC6.0. I need to add 2 extra fields on selection screen of transaction DP97. Program name is RVPKMASS97. i did not find any screen-exit for this. Please can anybody suggest any other way to add fields on selection screen... I think i can use enhancement points. please help if anybody has previously worked on this. I need to know following things:
1) how to add 2 fields on selection screen ( 2 fields are : MATNR-Service product and FFPRF-DIP profile)
2) where to add programming logic for this
Thanks in advance,
MinalHi,
Go to program RVPKMASS97.
Go inside INCLUDE rvpkmasspar.
(When you double click on the include a pop up screen will come up and in that select the RVPKMASS97)
Click on spiral icon there on the tool bar.
right click on the '
ENHANCEMENT-POINT RVPKMASSPAR_01 SPOTS ES_RVPKMASSPAR STATIC INCLUDE BOUND .' line and select enhancement-> create. and give some implementation name and text.
now you can declare ur fields in this implementation.
After declaring save it and activate it.
Now go back to ur txn and run. you are able to see the custom fields on the screen.
Reward me points if it is helpful.
I think it will help you out.
Thanks,
Prasanna -
How to add a new selection field in an infoset
Hi everyone,
I have a problem changing an infoset when I add an additional field. This field is added to its respective field group.
The problem is that after generate the infoset, I go to the transaction where the querys are made and the new field created has got only a checkbox in the column 'Output', while the column 'Selection' has no checkbox.
This only happens with this field, while the rest of the fields have two checkbox in column 'Output' and in column 'Selection'.
What can I do to make appear checkbox 'Selection' in order to make querys?
Thanks in advance,
MayteHi again,
I have seen the threads about ad hoc querys but I'm still with the problem...
I'm going to tell you the steps I follow.. Perhaps someone is able to tell me what I'm doing wrong...
1. I go to S_PH0_48000513 transaction where I choose the infoset which I want to make queries..
2. In sq02 transaction I click right button in 'additional fields' in the field group where I want to add the field. I click create and fill long text, header, type, length and like reference...
3. Once the field is created I add the field in the 'field group' and generate the infoset
4. In S_PH0_48000513 I can see that the field has been added with no checkbox 'Selection' but only with checkbox 'Output'...
I need checkbox 'output' and I don't know why doesn't appear...
Thanks for your replies -
Add custom field in the selection screen for shopping cart monitor report
Hello,
refering to the notes 458591 an 672960, in order to add custom field at item level, we get the structure INCL_EEW_PD_ITEM_CSF.
But this doesnt make it appear on the "Shopping Cart Monitor Report" selection screen.
So should I try adding it in the existing interface of the badi bbp_sc_mon ?hello Yann,
ok I will implement that. Is it possible to change the interface of the badi method to include more data if we want to check the role of the user who is executing the shopping cart monitor report and accordingly do the settings of field display ? Or calling a function module inside the method to get the attributes of sy-uname would be easier?
rita -
Add customer field in IH08 selection-screen
Hi guys,
I need to add 1 customer field ZZ to the selection screen IH08 in order to search equipments by the ZZ field.
Did anybody know if it is possible?
Thanks in advance,
LMSI use enhacemente ITOB0001 to add one field to the screen of equipments (IE01, IE02 and IE03) and that is working perfectly.
In IH08, i put an append structure on structure RIHEQUI_LIST in order to the ZZ field could be seen in the ALV list. But, my problem is to make that ZZ field searchable... I need to search equipment on IH08 by the ZZ field.
I look on SPRO, for the equipments lists customization, i made tests and tests but nothing works...
If anybody knows how to solve this, please help me.
Other chance is to develop a Z program... But i prefer use the IH08...
Best Regards
Edited by: Luís Silva on Jul 31, 2009 11:28 AM
Edited by: Luís Silva on Jul 31, 2009 11:29 AM -
Need to add date field on select screen of report RM06INP0.
Hi All,
I have to create a new report ZRM06INP0 as a copy from RM06INP0 and add a field in the selection.
When the selection "Price Determination w/o PO" is not picked then we need a maintainable field from the info record. The default for the date is 9999.12.31 and should manually maintained. This date shoulde be written in the info record.
How to achieve this?
Please see OSS Note 392 988 Solution to 2 for more info.Hi Akash
What kind of date is you wanted? You can try to find it in dynamic selections.
regards,
Archer -
Add custom fields on selection screen and ouput in Transaction QM11
Hi All,
i have the requirement to enhance the transaction qm11( Report : RQMELL10) to add the custom fields on the report selection screen and in the report output.
i tried to add the fields on selection screen by copy the standard program RQMELL10 to custom one. and tried to add the fields above to the coding tab but i am not able to display the text for those fields of select-options. can any one help me is it the right way to copy the standard program to custom program and adding the custom fields and how to get the text element for the custom fields which we are going to add it. i tried to add the text element in program text elements but it is not appering on the report.
please requeting the help asap if it is possible.Have a glance in below thread.
Enhancing transaction QM10
Also, there are some more threads available in enhancing the QM10 / QM11. Please search those as well. -
REPORT PAINTER - Add a field to a selection screen - custom report
Hi,
I'm trying to add a field to a selection screen to a CUSTOM REPORT that has been made in REPORT PAINTER (Y_DVL_xxxxxxx). How should I proceed to do so?
Thanks a lot,
JulienHi Julien Girard ,
Could you please check the below link :
http://help.sap.com/saphelp_erp2005/helpdata/en/56/32e339b62b3011e10000000a11402f/frameset.htm
Regards,
S.Manu. -
Field to add in Dynamic selection
Hi experts,
If i want to add one field in dynamic selection in FBL3N report what is the procedure?
please give the steps
points will be awardedHi,
If iam not wrong you want select field from dynamic selection
for that goto fbl3n and select dynamic selection in that which field is required select that and execute you will get desired results
but if you want *** fields in dyanmic selection i think it is immpossible.
Thanks
Shiva -
REPORT PAINTER - Add a field to a selection screen to a CUSTOM REPORT
Hi,
I'm trying to add a field to a selection screen to a CUSTOM REPORT that has been made in REPORT PAINTER (Y_DVL_xxxxxxx). How should I proceed to do so?
Thanks a lot,
JulienHi Julien Girard ,
Could you please check the below link :
http://help.sap.com/saphelp_erp2005/helpdata/en/56/32e339b62b3011e10000000a11402f/frameset.htm
Regards,
S.Manu.
Maybe you are looking for
-
Any Free Training Material or Courses availabel online ?
Hi, I am new to Primavera and I would like to learn Enterprise Project Portfolio Management. Can anyone throw some light on free online training courses foir the same ? Thanks, Murthy
-
Job titles: training/elearning design vs graphic design/communications design
Hello everyone, I realize this is not a typical 'Captivate' quiestion, and I've posed it to some networking groups on LinkedIn, etc., but I wanted to ask it to this niche community as well: I started out 3 years ago as a Training Documentation Specia
-
I purchased the I pod 4g 32gb during x-mas week from Future shop and reticently I discovered that there were two dead pixel on the screen. I noticed it when booting the device, the two white dotes popped right out of the black background. I have neve
-
How do you determine debit vs. credit in an invoic01 idoc?
Hi all, I'm relatively new to the EDI area of SAP - We have edi documents (X12 810) that are coming into our R/3 47 system via invoic01 idoc. The problem is that credits are being posted as debits. I can see in the X12 document that it is marked "C
-
Boot up, Login / Logout very slow
Hi all, I have a mid 2010 Mac Pro (Dual Quad Core 2.6, 12GB RAM, 1TB 7200 HD). The computer all of a sudden became extremely slow at normal tasks (opening a Finder window, running commands on Terminal). I ended up doing a clean install of Mavericks (