Add a future date in pages automaticly

Hi there!
This is my first post but I've learned loads from this forum, so thank you for submitting.
Q: Is there an option to add a future date to a document automaticly. For example: When I create an invoice from a template, I want the paydate to be updated 14 days from current date in the future. In numbers you can do this =today()+14, but how about in pages?
Thank you for your time.

marijndepraetere wrote:
Hi there!
This is my first post but I've learned loads from this forum, so thank you for submitting.
Q: Is there an option to add a future date to a document automaticly. For example: When I create an invoice from a template, I want the paydate to be updated 14 days from current date in the future. In numbers you can do this =today()+14, but how about in pages?
Thank you for your time.
Pages can do Tables, similar to Numbers tables, using all the same expressions. There are limitations in Pages regarding editing tables and the lack of ability to link tables.
In this case, you would make a 1-cell table (1-row by 1-column) and place your expression in that cell. You can eliminate all border and stroke to make the fact that it is a table less obvious.
Here's the table in edit mode:
And with the cell selected, not in edit mode:
And as you would like to see it:
Regards,
Jerry

Similar Messages

How to add attributes in Data Column for automatic changes

Hello everybody,
Could you give me an advice?
I have characteristic and attribute assigned to it.
I want to make what when i change characteristic(variable) its attribute in planning layout changes too. So in planning area window in <b>Characteristics Rels</b> tab i made "<i>Derivation, Combination Check and Proposal</i>" with main characteristic and its atribute. Everything works fine, but problem is, that attribute can be only in <b>Header</b> or in <b>Lead column</b>.
In planning layout i want to add what attribute in data column.
Maybe where is other solutions?
Thanks in advance
Best Regards,
Arunas

Hy, Srini,
Thanks for your response.
There is a simple example, which describes the main principle of my solution:
Characteristic DIVISION
A
B
(filled with master data)
Characteristic LEVEL
1
2
(filled with master data)
Characteristic NAME
Ben
John
(filled with master data)
char. LEVEL, NAME are attributes for char. DIVISION
DIVISION with master data:
Division Level Name
   A        1     Ben
   B        2     Jhon
Planning Layout:
In header section is char. DIVISION (variable)
When I select DIVISION with value A, in layout values for attributes should be displayed automaticaly:
DIVISION = A
NAME
LEVEL
(Lead column)
(Data column)
Ben
1
I find solution to do it with Characteristic Rels, but i can't insert char. LEVEL into Data Column, it can be just
in Lead Column.
I don't know how to do it.
Could you suggest something?
Best Regards,
Arunas

I've figured out that I can add $$cpInfoCurrentDateString$$ to a caption box to display today's date. Can I add a future date? i.e. Always 1 year after today.

I need to have Captivate populate a date that is one year from today.

Execute this javascript on enter of the first slide:
var objCp = document.getElementById('Captivate');
var myEpoch = objCp.cpEIGetValue('m_VarHandle.cpInfoEpochMS');
var f = new Date(myEpoch+31155760000);//1 year
var fMonth = f.getMonth() + 1;
var fDay = f.getDate();
var fYear = f.getFullYear();
objCp.cpEISetValue('m_VarHandle.fMonth',fMonth);
objCp.cpEISetValue('m_VarHandle.fDay',fDay);
objCp.cpEISetValue('m_VarHandle.fYear',fYear);
Create the variables: fMonth, fDay and fYear.
Then to display:
$$fMonth$$/$$fDay$$/$$fYear$$
12/12/2015

Automatically add a current date at the end of the comments

Hi,
I have a form on a table with 5 fields... on one the field I am asking my users to enter comments...
I am looking for a functionality to automatically add a current date at the end of the comments, only when they are updated or newly filled in...
Please advice how can I do it... I am anticipating some sort of a trigger on column (when the data is modified)...
Thanks

automatically add a current date at the end of the comments, only when they are updated or newly filled inDo you want to add the date to the page item itself and hence show it to the end user as and when its changed, thn
Assuming comments item is named '*P1_COMMENTS* , add the following to the "execute on load"
$('P1_COMMENTS').change( function(){
var d = new Date();
$s('P1_COMMENTS', $v('P1_COMMENTS')+ d.toUTCString() );
});If its to be done only when updating ie in the PLSQL block
UPDATE <table name>
SET <comments _column> = ( SELECT DECODE( NVL(<comments _column>,'')
                                                                      ,NVL(:P1_COMMENTS,'')
                                                                      ,<comments _column>
                                                                      ,:P1_COMMENTS||TOCHAR(SYSDATE,'DD-MON-YYY')
                                              FROM DUAL
WHERE <condition>

Is there a way to automatically add another of the same page while a form is being filled?

Is there a way to automatically add another of the same page while a form is being filled?
I have a two-page form of which the second page is essentially a spreadsheet analog. Often, there is need for for more lines than are available on the page. Is there a way in which to add another or even multiple copies of the second page?
Thanks ahead...
TG

You can do that with a dynamic XFA form created in LiveCycle Designer, which comes with Acrobat Pro for Windows. For more information, you can ask over at the LiveCycle Designer forum.

How do I add an portal page automatically?

I have never with Oracle Portal. I am an Ajax Developer.
I want to be able to make ajax calls to:
1. create a page
2. get the layout id
3. get the region ids for a layout
Is this possible via PL/SQL built-in? I don't want to start writing server code.
Sorry we don't have a server-side developer on the team.
-P

It depends on which type of document you started with. There are two types, word processing and page layout document's. You can the them on the left when you open File > New from Template chooser
Word processing documents will add pages automatically as you write along or add objects that are inline. You can also add by clicking on the Section icon in the tool bar. This will also add a section break in the document.
Page layout documents pages has to be added manually by either using Insert > Pages > choose from the options. Or use the Page icon in the tool bar.
To learn more about Pages 09 download the Pages User Guide from your Pages Help menu.

How do I get numbers to automatically add the next date down a column in numbers?

How do I get numbers to automatically add the next date down a column in numbers?

Hi Dd,
If you want the next date automaitcally filled in when you add a row to the bottom of the table, you can use a formula.
Here's an example, done in Numbers 2.3 (Numbers '09). The method is basically the same in Numbers 3.
Formulas in row 3:
B3: =B2+1
C3: =C2+7
D3: =D2+14
These have been filled down to the last row of the table.
The same table is shown below after three rows have been added by dragging the Row control handle (below the tab for row 7) down. No changes other than adding thse three rows were made by the user.
Note that rows 1 and 2 are header rows, and that row 2 contains the starting date for the seraies of date in each column. In the formula, the number at the end tells Numbers how many days to add to the previous date to get the next date.
Autofill of the formula requires that every non-header cell located above the cell into which the formula is to be filled contains the same formula.
Regards,
Barry

A dynamic "future" date stamp

Hello folks,
I am looking to insert a future date automatically in a dynamic stamp. That is, I would like to be able to have the stamp automatically add X days to the current date. I have seen a lot of JavaScript forums, tried many of the proposed solutions, but have yet to find something that works for my dynamic stamp. Currently my stamp looks like this:
event.value = (new Date()).toString();
AFDate_FormatEx("mmmm d, yyyy");
Amy help would be greatly appreciated. Thanks!

Thanks for the suggestion. I gave this a shot, and it simply displays today's date:

Safari Scrolling Down The Page Automatically

Why is Safari Scrolling Down The Page Automatically? This started 3-Days ago... Also we keep getting the "MacKeep - PopUp" Everytime we Click on an Item in the Original Screen.
We have All the Latest Update for OS X 10.9.5
This is Clearly a Software Issue I have spoken to others who are experiencing the same.
How do we Fix This Bug in Safari?

You may have installed the "VSearch" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
This trojan is distributed on illegal websites that traffic in pirated content. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that this Internet criminal has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Date Picker - only allow future dates?

Does anyone know of a way to control the date picker to only allow the selection of future dates? I would like to force my users to use the date picker, but will need to shade out or grey-out dates less than sysdate+3. This will be used for scheduling payments in the future and should not allow a user to pick a past date or a date within two future days of the current date.
Thanks in advance for your help,
Todd

Vikas,
I have followed the instructions on that page, but I'm a little unsure about one step. The instructions say, In the HTML Header of the Page Attributes enter "INCLUDE_DHTML_CALENDAR_SCRIPTS"
My current HTML Header of the Page Attributes has this code:
<script language="JavaScript" type="text/javascript">
--(this is commented out) htmldb_delete_message='"DELETE_CONFIRM_MSG"';
</script>
I'm not sure where to add the "INCLUDE_DHTML_CALENDAR_SCRIPTS" text. Do I need something before or after that quoted string?
I'm getting the following error message when I run the page:
ORA-06550: line 22, column 6: PLS-00103: Encountered the symbol ";" when expecting one of the following: begin case declare end exception exit for goto if loop mod null pragma raise return select update while with << close current delete fetch lock insert open rollback savepoint set sql execute commit forall merge pipe The symbol "exit" was substituted for ";" to continue.
Error ERR-2904 Unable to set shortcut value.
OK

Problem with item and/or data during page-processing-PS/SQL

Greetings!
On my page I have a custom report (from 2 tables) and a small form-field, that adds and edits data in the report. After generating the form with the wizard I added an extra item, to store the id from one of the tables from the report data.
Now, on submit a calculation should take place, that updates data according user input with a procedure in Page-Prosseses:
declare a number;
begin
case :PLATZ
when 1 then a:=100;
when 2 then a:= 50;
else a:=25;
end case;
update TBL_MITGLIEDER set TURNIERPUNKTE = TURNIERPUNKTE + a
where ID_MITGL = :P14_ID_MITGL;
end;
:PLATZ is user selected (1,2,3), :P14_ID_MITGL stores the reference to TBL_MITGLIEDER (and shows the change, when I select another record)
As I understand, that process should also run, when I submit a chance, but nothing happens then.
But when I try to save a new record (which worked without any problems before adding that process), I get this error message:
ORA-06550: line 1, column 64: PL/SQL: ORA-00957: duplicate column name ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored
Error Unable to process row of table TBL_TURNIERSIEGER.
Then, when I go back into the app-builder and try to run the page again, I get this message:
ORA-01403: no data found
Error Unable to fetch row.
I am not sure, if you guys have all the information you need, to know whats going on. Maybe this has to do with session-id and the whay, items are updated. I hope you can help me.
Thanks, best regards,
tobi

First can you please post all log file errors
>> I can't really give you a solution or specific recommendation since I did not saw this error yet myself, but on your own risk you can try:
1. You may try to just register 'dts.dll' using regsvr32.exe, but this error may indicate a bigger problem with setup.
If you are running SQL Server 64bit then try running this at the command prompt: %windir%\syswow64\regsvr32 "%ProgramFiles(x86)%\Microsoft SQL Server\90\dts\binn\dts.dll"
2. You can try reinstall from start (In this case you have to make sure that you un-install all)
[Personal Site] [Blog] [Facebook]

How can I make a intro page for my website, then after the intro has run make the page automatically change to my we site home screen

how can I make a intro page for my website, then after the intro has run make the page automatically change to my website's home screen

You can do this using a meta refresh but the problem is you have to add it to the html file for the page very time you publish changes.
A better way is to create a splash page and upload it to the server outside of the folder produced by iWeb. Example HERE.
The meta refresh is added to the head section of the html file...
<meta http-equiv="refresh" content="32;url=http://www.domain.about.com/Page-Name.html">
The delay time in seconds is marked in blue and the URL to the redirect page is in red.

Can I add Action button on each page of my pdf document

I have created many power point slides with an action button on each slide that allows the user to click to display a video clip.   I would like to create a pdf document of this and replace each of my action button in ppt with an action button that works in Acrobat.
I noticed that action buttons can be added to forms, but I want to be able to add an Action Button on each of my ppt slides to start playing a video clip (each slide will have a different video).
I would like to do this using any coding method (i.e. Javascript, VBA, C , etc).   I think acrobat uses Javascript.
The reason, is that I want to display my power point slides on an IPad and they don't support hyperlink in power point.   I believe IPad does suppport the full acrobat capabilities.
Can this be done ??
Any suggestions where to start ??
Thank You,
G

NO problem creating the buttons and then playing this back in Acrobat. Works great.
However, unfortunately, none of the PDF viewers for the iPad support playing movies.   So playing it there won't work :(.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Sat, 28 Jan 2012 11:00:47 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Can I add Action button on each page of my pdf document
Can I add Action button on each page of my pdf document
created by gw70115<http://forums.adobe.com/people/gw70115> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4171109#4171109

How to disable the future dates in Date pick calendar - SQL Server Reporting Services

Hi All,
I have a scenario to run the report only for the Past days, and i have datepick calendar as a parameter for selecting Start Date and End Date. I want to control the Users by not to select the Future Dates in the End Date. In Other Words, the user should not select beyond the Current Date,
Is there any way for me to control it. Advance Thanks
Regards,
Sundarrajan.

Hi
Here is a solution for ur problem: put the below code in the script, and the add
OnClientDateSelectionChanged="checkDate"
in the calenderExtender... u ll get the answer nicely.. Happy coding..
<script type="text/javascript">
function checkDate(sender,args){
alert("You cannot select a day greater than today!")
sender._selectedDate = new Date();
sender._textbox.set_Value(sender.selectedDate.format(sender._format))
}</script>

Action needs to be triggered in future date

Hi All,
We have a requirement where we need to trigger an Action on Contract's End date. How can we define action, so that it would be triggered in future date automatically with out any user intervention. I have checked with Date profiles. That wouldnt help in this scenario.
Can we do this with events..? How can we schedule an event, so that the event would be triggered in future (ex. after 2 years)?
Thanks in Advance!
Regards,
Rajesh.

Hi Rajesh,
A lot depends on how are you planning to schedule the action in your case. With actions a lot of different combinations of 'schedule condition','start condition', 'action merging' options and 'processing time' can be used to meet the requirements.
If you want trigger the action immediately when the contract end date is reached, one of the options could be to use the condition contract end date = current date as schedule condition and then use the following:
Processing Time = Immediate Processing
Action Merging = Max. 1 Action for Each Action Definition
Do not set a start condition.
Thanks & regards,
Ahmad

Add a future date in pages automaticly

Similar Messages

Maybe you are looking for