Add a Z field in the VBAP table and include that in the custom IDoc Struct

Hi All,
I have appended a z field in the table VBAP and want to populate that in the BAPI structure for sales order change. This z field is coming at the line item level. I need to find a user exit to populate this field in the BAPI structure.
Thanks,
MSDent009

Hello,
I need to do the same for retail and the procedure is not pretty clear yet. Could you please tell how you have it done?
I need namely to add aditional fields to material master data to display them on additional data tab. I have created append-structure in MARA and also have created a subscreen for all the additional fields. Now some customizing should be done to adjust this subscreen. What should i do after it? These additional fields need to be sent with Pricat IDOC later.
Any hints on that would be very requiered.
Thanks,
Marina

Similar Messages

Added new field in SC Item table but after Check/Enter the value disappears

I have added a field in the SC Item table in view V_SC_DOTC_BASIC. Everything works perfectly well except that when a value is entered into that field and ENTER or CHECK is selected, the value goes away and the field becomes a read-only field with nothing in it.
I know I am missing something, but what?
All help is appreciated and rewarded.

Thank you for your reply Masa.
There is currently an implementation of that BADI that is in use. Brief detail on it. We added a field to the SC Item and included it in the table view for WBS Element. This will allow the users to enter the WBS Element on the item line and not have to go to the Account Assignment section.
The BADI implementation takes whatever is entered in that field and applies it to the account assignment for that item.
The actual value in the field is never changed. It is just used to update the account assignment.
It is not a tabular addition, so the ET_ICF does not come into play.
Is there anything else you can think of that would allow for the field to display its entries once the CHECK/ENTER is activated?

Material text is not getting updated in the VBAP table

Hi All,
There is an customized field in the sales order which picks up the addition material information maintained for a material. When we create the sales order the text appears. After we save the sales order, when we open the sales order(VA01/VA02), the text does not appear. If you check the VBAP table, the field which stores this text is blank. It will not update when we save the sales order.
Could someone please let me know how can we check this problem.
Regards,
Swathi

Hi
Usually, this fields (zzfield) are populated with the subroutine userexit_move_field_to_vbap in include MV45AFZZ.
I hope this helps you
Regards
Eduardo

Refreshing the value of a field in a table and displaying it on the screen.

how do i mimimize calls to the database in the following scenario?
I need to show the latest value of a field in a table in a database through a java program. in a concurrent access environment, there are chances of multiple users getting stale values. how do I overcome this problem through code?
please advise.

There are many ways of doing this. However its worth noting that RDBMS database are not messaging, event driven systems and are not best suited to do what you want to do. You should only consider doing this if you have a low rate of changes.
You can
- Poll the database table and look for changes.
- Add a trigger to the table to record the keys which have changed. The have a query to find just the key which have changed.
- When a field changes, also send a broadcast/topic message.
- Add a trigger which sends a JMS message when a change occurs. (This is entirely DB/JMS specific, you need to find if this is possible)
Again, databases are not ideally suited to event driven, real time updates. There is no simple, clean solution.

How to find all the DDIC tables and fields of Tcode?

Hi All,
For several transactions we have caprtured all the filed names along with the technical names.
Ex : in VA03 - in the initial screen ,postal code field is there.When i see F1 help for that field i could see POST_CODE2 as its technical name.
But i want to see the actuall DDIC table field which corresponds to this field that is LFA1-PSTLZ.
Like wise there are so many T-codes for which i need do the same thing.But for some transactions i am unable to find out the database tables and the corresponding fields.Please suggest any other easier way to do this.
Is there any way to find out all the DDIC tables and fields that gets updated for a Tcode?
Please help me out in this.
Thanks,
Jyothi D.
Edited by: jyothi dosapati on Mar 27, 2008 2:48 PM

HI,
DDIC tcode is SE11
GIVE THE TABLE NAME THERE AND CLICK DISPLAY
FOR EXAMPLE
TYPE LFA1 THERE AND CLICK DISPLAY....
Regards,
V .Balaji
Reward if usefull

Nsert/Update and Add Column at the same Table and at the "same" Time

Hello,
I want Insert/Update and Add Column at the same Table and at the "same" Time but in different sessions.
Example:
At first the "insert/update" statement:
Insert into TestTable (Testid,Value) values (1,5105);
After that the "add" statement:
Alter table TestTable add TestColumn number;
- sadly now I get the message: ORA-00054: resource busy and acquire with NOWAIT specified
"insert/update" statement:
Insert into TestTable (Testid,Value) values (2,1135);
After that the execute commit.
I don't know when the first session set the commit statement so I want that the DB the "Alter Table..." statement execute if it's possible.
If it's possible I want to save a repeat loop with the "Alter Table..." statemtent.
Thanks for ideas

Well I want to walk in the rain without and umbrella and still stay dry, but it ain't gonna happen.
You can't run a DDL statement against a table with transactions pending. Session 2 has to wait until session commits or rollbacks (or until the session is killed). That's just the way it is.
This makes sense if you think about it. The data dictionary has to be consistent across all sessions. If session 2 was allowed to change the table structure whilst session 1 has a pending transaction then the database is in an inconsistent state. This is easier to see if you consider the reverse situation - the ALTER TABLE statement run by session 2 does a DROP COLUMN TESTID rather than adding a column: now what should happen to session 1's INSERT statement? You have retrospectively invalidated a statement that was perfectly legal when it was executed.
If it's possible I want to save a repeat loop with the "Alter Table..." statemtent.Fnord.
Cheers, APC

I need to know the name of the database table and the fields in that table

hi,
i need to I need to know the name of the database table and the fields in that table for the following fields of the front end .
1) incident details.
2) ownership details
3) injury type
4) % of investigation completed withen 7 days.
5) count of incident type
6) cost of workers compensation claim.
7) injury resulting from for workers compensation claim
8) investigation free text.
9) investigation contribution factors.
10) investigation root cause.
11) investigation root cause free text
12) employee risk assesment
13) protential infrigment notice issued
14) actual infrigment notice issued.
15) actual infrigment notice reference number.
16)vehicle damaged text.
18) when the incident occured.
thanks and regards,
pronoy .

Hello,
Check CCIHT* under se16 and search for relevant information
Thanks
Jayakumar

Inserting in the UUT_Results table a value that we read from our data base from a local variable

We would like to include in the UUT_Results table a value that we read from our data base into a local variable during the execution of our sequence file. We found that by modifying the configure database options we were able to add a column for this variable, but the local variable was not available to be placed into an expression for that column from the local variables or parameters. Is it possible to do this, and if so, how? Station Globals were available to be included in the expression, however the sequence file may be executed on more than one system which makes the Global unavailable on systems other than the one where the sequence file originated.

You can use the TestStand API to programmatically create global variables at runtime, thus ensuring their existence. For example, you could call Engine.Globals.SetValString("GlobalStringVariableName", PropOption_InsertIfMissing, "variable value")
Of course, if you need to test multiple UUTs in parallel, a single global is not sufficient. In that case you might consider adding the field you need to the UUT datatype in the process model. You could then access the field in your sequence via RunState.Root.Locals.UUT.YourNewField = YourNewValue.
If you also want your sequence to run without using a process model, you must check for the existence of the UUT before accessing it. You could use the expression function: PropertyExists("RunState.Root.Locals.UUT.YourNewFi
eld")

How to populate the main table and the lookup's at the same time

Hi ,
What I have with me is the XML files which contain the data from the material master and the excel sheet which talks about the mapping . it basically tells me which field of the main table maps to which field of which segment in the IDOC and also the name of the table and the field in the R3 system .
I wish to use this info to populate the data in the material repository .
- How can I populate the data in the lookup table at the same time when I am populating the main table ? I have only the XML's that correspond to the main table . I don't have seperate data for the lookup tables .
- Can I use the standard maps available for import in the business content of material repository in MDM ?
- If the answer to the second question is NO then I think i can create the maps and save them for future use .
Regards
Deepak Singh

Hi, Deepak
>>> - How can I populate the data in the lookup table at the same time when I am populating the main table ? I have only the XML's that correspond to the main table . I don't have seperate data for the lookup tables .
I don't think you can populate both main table and all fields of lookup tables at the same time, i.e. using same map. You can consider 2 options to upload all information you have:
1) If your XML file contains data you would like to upload to lookup tables, you can upload it to MDM lookup tables with several maps using same XML and choosing different sections of that XML corresponding to different MDM lookup tables.
2) Also you can upload main table simultaneously with lookup table entries (using same map), but in this case new lookup table entries will only contain display field values that you mapped. To do this you should use 'Add' value mapping functionality for fields that you mapped to lookup tables.
>>>- Can I use the standard maps available for import in the business content of material repository in MDM ?
1) In case you have material master repository delivered by SAP and you use XML files which structure corresponds to SAP predelivered XSD schemas then you can use these maps undoubtedly.
2) If your repository is based on SAP predelivered, but you changed it ,you should adjust these maps due to differences in repository structure and XML files structure.
3) If you created your repository from scratch you should consider option of making your own import maps.
Regards,
Vadim Kalabin

Asigning Reports, specific tables and Url links to the Role

Hello Gurus,
could you please tell me the procedure of asigning Reports, specific tables and Url links in the role.actually i know the process of assigning T-Codes to the role but i dont know the procedure for reports and url links and tables...
i hope u people will respond positively.
Cheers.......
srinivas.korva

Hi Srinivas,
"i want to add only one particular table not all tables", you can do this using a Custom Transaction Code, the following are the steps to do it:
1) goto se93, give a unique name, say zxxx
2)Enter SE16 into the transaction field and select the flag the skip initial screen field:
3)On the lower portion of the screen, enter the following information:
Name of screen field: DATABROWSE-TABLENAME
Value: Enter the name of the table you want to browse with
4)save it.
5) Now add the transaction zxxx in th role, and assign it to the user.
With this, when user executes the transaction, he/she will be able to see only the perticular table you added.
"in PFCG what is the use of Exper mode for profile generation. what is the difference between general profile generation and expert mode profile generation".
Expert mode has 3 options:
1) Delete and recreate profile and authorizations---This will completely delete the old profile and add only the new once.
2) Edit old status----It will edit the old values
3) Read old status and merge with new data----This will add the new values aithout actually disturbing the old ones.
Hope it helps.
Please award points if it is useful.
Thanks & Regards,
Santosh

How to Bind a Combo Box so that it retrieves and display content corresponding to the Id in a link table and populates itself with the data in the main table?

I am developing a desktop application in Wpf using MVVM and Entity Frameworks. I have the following tables:
1. Party (PartyId, Name)
2. Case (CaseId, CaseNo)
3. Petitioner (CaseId, PartyId) ............. Link Table
I am completely new to .Net and to begin with I download Microsoft's sample application and
following the pattern I have been successful in creating several tabs. The problem started only when I wanted to implement many-to-many relationship. The sample application has not covered the scenario where there can be a any-to-many relationship. However
with the help of MSDN forum I came to know about a link table and managed to solve entity framework issues pertaining to many-to-many relationship. Here is the screenshot of my application to show you what I have achieved so far.
And now the problem I want the forum to address is how to bind a combo box so that it retrieves Party.Name for the corresponding PartyId in the Link Table and also I want to populate it with Party.Name so that
users can choose one from the dropdown list to add or edit the petitioner.

Hello Barry,
Thanks a lot for responding to my query. As I am completely new to .Net and following the pattern of Microsoft's Employee Tracker sample it seems difficult to clearly understand the concept and implement it in a scenario which is different than what is in
the sample available at the link you supplied.
To get the idea of the thing here is my code behind of a view vBoxPetitioner:
<UserControl x:Class="CCIS.View.Case.vBoxPetitioner"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:v="clr-namespace:CCIS.View.Case"
xmlns:vm="clr-namespace:CCIS.ViewModel.Case"
mc:Ignorable="d"
d:DesignWidth="300"
d:DesignHeight="200">
<UserControl.Resources>
<DataTemplate DataType="{x:Type vm:vmPetitioner}">
<v:vPetitioner Margin="0,2,0,0" />
</DataTemplate>
</UserControl.Resources>
<Grid>
<HeaderedContentControl>
<HeaderedContentControl.Header>
<StackPanel Orientation="Horizontal" HorizontalAlignment="Right">
<TextBlock Margin="2">
<Hyperlink Command="{Binding Path=AddPetitionerCommand}">Add Petitioner</Hyperlink>
| <Hyperlink Command="{Binding Path=DeletePetitionerCommand}">Delete</Hyperlink>
</TextBlock>
</StackPanel>
</HeaderedContentControl.Header>
<ListBox BorderThickness="0" SelectedItem="{Binding Path=CurrentPetitioner, Mode=TwoWay}" ItemsSource="{Binding Path=tblParties}" />
</HeaderedContentControl>
</Grid>
</UserControl>
This part is working fine as it loads another view that is vPetioner perfectly in the manner I want it to be.
Here is the code of vmPetitioner, a ViewModel:
Imports Microsoft.VisualBasic
Imports System.Collections.ObjectModel
Imports System
Imports CCIS.Model.Party
Namespace CCIS.ViewModel.Case
''' <summary>
''' ViewModel of an individual Email
''' </summary>
Public Class vmPetitioner
Inherits vmParty
''' <summary>
''' The Email object backing this ViewModel
''' </summary>
Private petitioner As tblParty
''' <summary>
''' Initializes a new instance of the EmailViewModel class.
''' </summary>
''' <param name="detail">The underlying Email this ViewModel is to be based on</param>
Public Sub New(ByVal detail As tblParty)
If detail Is Nothing Then
Throw New ArgumentNullException("detail")
End If
Me.petitioner = detail
End Sub
''' <summary>
''' Gets the underlying Email this ViewModel is based on
''' </summary>
Public Overrides ReadOnly Property Model() As tblParty
Get
Return Me.petitioner
End Get
End Property
''' <summary>
''' Gets or sets the actual email address
''' </summary>
Public Property fldPartyId() As String
Get
Return Me.petitioner.fldPartyId
End Get
Set(ByVal value As String)
Me.petitioner.fldPartyId = value
Me.OnPropertyChanged("fldPartyId")
End Set
End Property
End Class
End Namespace
And below is the ViewMode vmParty which vmPetitioner Inherits:
Imports Microsoft.VisualBasic
Imports System
Imports System.Collections.Generic
Imports CCIS.Model.Case
Imports CCIS.Model.Party
Imports CCIS.ViewModel.Helpers
Namespace CCIS.ViewModel.Case
''' <summary>
''' Common functionality for ViewModels of an individual ContactDetail
''' </summary>
Public MustInherit Class vmParty
Inherits ViewModelBase
''' <summary>
''' Gets the underlying ContactDetail this ViewModel is based on
''' </summary>
Public MustOverride ReadOnly Property Model() As tblParty
'''' <summary>
'''' Gets the underlying ContactDetail this ViewModel is based on
'''' </summary>
'Public MustOverride ReadOnly Property Model() As tblAdvocate
''' <summary>
''' Gets or sets the name of this department
''' </summary>
Public Property fldName() As String
Get
Return Me.Model.fldName
End Get
Set(ByVal value As String)
Me.Model.fldName = value
Me.OnPropertyChanged("fldName")
End Set
End Property
''' <summary>
''' Constructs a view model to represent the supplied ContactDetail
''' </summary>
''' <param name="detail">The detail to build a ViewModel for</param>
''' <returns>The constructed ViewModel, null if one can't be built</returns>
Public Shared Function BuildViewModel(ByVal detail As tblParty) As vmParty
If detail Is Nothing Then
Throw New ArgumentNullException("detail")
End If
Dim e As tblParty = TryCast(detail, tblParty)
If e IsNot Nothing Then
Return New vmPetitioner(e)
End If
Return Nothing
End Function
End Class
End Namespace
And final the code behind of the view vPetitioner:
<UserControl x:Class="CCIS.View.Case.vPetitioner"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:vm="clr-namespace:CCIS.ViewModel.Case"
mc:Ignorable="d"
Width="300">
<UserControl.Resources>
<ResourceDictionary Source=".\CompactFormStyles.xaml" />
</UserControl.Resources>
<Grid>
<Border Style="{StaticResource DetailBorder}">
<Grid>
<Grid.ColumnDefinitions>
<ColumnDefinition Width="Auto" />
<ColumnDefinition Width="*" />
</Grid.ColumnDefinitions>
<TextBlock Grid.Column="0" Text="Petitioner:" />
<ComboBox Grid.Column="1" Width="240" SelectedValuePath="." SelectedItem="{Binding Path=tblParty}" ItemsSource="{Binding Path=PetitionerLookup}" DisplayMemberPath="fldName" />
</Grid>
</Border>
</Grid>
</UserControl>
The problem, presumably, seems to be is that the binding path "PetitionerLookup" of the ItemSource of the Combo box in the view vPetitioner exists in a different ViewModel vmCase which serves as an ObservableCollection for MainViewModel. Therefore,
what I need to Know is how to route the binding path if it exists in a different ViewModel?
Sir, I look forward to your early reply bringing a workable solution to the problem I face.
Warm Regards,
Arun

The type of the database table and work area (or internal table)...

Hello
I am trying to use a database and select all records from it and store them into an internal table.
My code:
Select * from xixi_dbcurrency into table gt_currency.
The error:
"The type of the database table and work area (or internal table) "GT_CURRENCY" are not Unicode-convertible . . . . . . . . . .     "
Any suggestions?
Thank you

Hi Thomas,
Thank you for your inputs above.
But as you suggested is we use INTO CORRESPONDING FIELDS OF TABLE then it resolve the error.
But I have below piece of code:
DATA:    it_new_source TYPE STANDARD TABLE OF _ty_s_sc_1,
              wa_source TYPE _ty_s_sc_1,
              wa_new_source TYPE _ty_s_sc_1,
              ls_target_key TYPE t_target_key.
SELECT * INTO CORRESPONDING FIELDS OF TABLE it_new_source
       FROM /bic/afao06pa100
       FOR ALL ENTRIES IN SOURCE_PACKAGE
       where /bic/fcckjobno = SOURCE_PACKAGE-/bic/fcckjobno
       and /bic/fcckjitid = SOURCE_PACKAGE-/bic/fcckjitid.
But since this is reading into corresponding fields of table the data load from one DSO to other DOS is running for long more that 15 hours and still not getting completed and giving dump.
So if I switch the search to below:
SELECT * FROM /bic/afao06pa100
   INTO TABLE it_new_source
       FOR ALL ENTRIES IN SOURCE_PACKAGE
       where /bic/fcckjobno = SOURCE_PACKAGE-/bic/fcckjobno
       and /bic/fcckjitid = SOURCE_PACKAGE-/bic/fcckjitid.
Then I am getting below error:E:The type of the database table and work area (or internal table) "IT_NEW_SOURCE" are not Unicode convertible.
Can you please advice on this, as performance need to improve in start routine code.
Thank You.

The type of the database table and work area are not Unicode convertible

***Data declaration
TYPES : BEGIN OF t_zle_lagerplanung,
                   SEl, "stores which row user has selected
                   kdauf TYPE zle_lagerplanung-kdauf,
                   kdpos TYPE zle_lagerplanung-kdpos,
                   etenr TYPE zle_lagerplanung-etenr,
                   papiermaschine TYPE zle_lagerplanung-papiermaschine,
                   runnr TYPE zle_lagerplanung-runnr,
                   prio TYPE zle_lagerplanung-prio,
                   werk TYPE zle_lagerplanung-werk,
                   durchmesser TYPE zle_lagerplanung-durchmesser,
                   breite TYPE zle_lagerplanung-breite,
                   anzle TYPE zle_lagerplanung-anzle,
                   lgpla TYPE zle_lagerplanung-lgpla,
                   lgtyp TYPE zle_lagerplanung-lgtyp,
                   art TYPE zle_lagerplanung-art,
                   anzhoehe TYPE zle_lagerplanung-anzle,
                   fa TYPE zle_lagerplanung-fa,
END OF t_zle_lagerplanung.
DATA : it_zle_lagerplanung TYPE STANDARD TABLE OF t_zle_lagerplanung INITIAL SIZE 0,
            wa_zle_lagerplanung TYPE t_zle_lagerplanung.
Here I am getting the data in internal table by using thiis select statement.
SELECT kdauf kdpos etenr papiermaschine runnr prio werk durchmesser breite
              anzle lgpla lgtyp art anzhoehe fa
FROM    zle_lagerplanung INTO CORRESPONDING FIELDS OF TABLE it_zle_lagerplanung
WHERE kdauf IN s_kdauf
AND       KDPOS IN s_kdpos
AND      werk = p_werks.
But while updating the particular field in zle_lagerplanung using this statement
UPDATE zle_lagerplanung from table it_zle_lagerplanung.
it is giving syntax error
"The type of the database table and work area (or internal table)
"IT_ZLE_LAGERPLANUNG" are not Unicode convertible. "
Could any one help me out how to resolve this problem....
Thanks in advance

Dear Shayamal,
XXX....are not Unicode convertible
This error comes while inserting or updating database and the fields are not matching between data base table and structure .
Check you fields of data base table and "zle_lagerplanung" and struture "it_zle_lagerplanung" . There fields must match.
thanks and regrds,
Anup Banerjee

How to join fields from different internal tables and display into one int

hai i have one doubt...
how to join fields from different internal tables and display into one internal table..
if anybody know the ans for this qus tell me......

hii
you can read data as per condition and then can join in one internal table using READ and APPEND statement..refer to following code.
SELECT bwkey                         " Valuation Area
         bukrs                         " Company Code
    FROM t001k
    INTO TABLE i_t001k
   WHERE bukrs IN s_bukrs.
IF sy-subrc EQ 0.
    SELECT bwkey                       " Valuation Area
           werks                       " Plant
      FROM t001w
      INTO TABLE i_t001w
       FOR ALL ENTRIES IN i_t001k
     WHERE bwkey = i_t001k-bwkey
       AND werks IN s_werks.
    IF sy-subrc EQ 0.
      LOOP AT i_output INTO wa_output.
        READ TABLE i_t001w INTO wa_t001w WITH KEY werks = wa_output-werks.
        READ TABLE i_t001k INTO wa_t001k WITH KEY bwkey = wa_t001w-bwkey.
        wa_output-bukrs = wa_t001k-bukrs.
        MODIFY i_output FROM wa_output.
        CLEAR wa_output.
      ENDLOOP.                         " LOOP AT i_output
    ENDIF.                             " IF sy-subrc EQ 0
regards
twinkal

Getting the internal table of standard program to my custom program

Hi All,
I have a requirement in which i have to get the data from internal table ALV_ITAB from program HKBRO20. As this is the standard program, i have copied this program into Z custom program and using export parameter i am getting the data from internal table ALV_ITAB to my custom program (Using submit of the Z of the standard program). Can any one pls tell me whether the process i am following is correct if not pls tell me how to get the internal table from standard program to our custom program.
the process i am following
submit ZHBRO20 and return. IMPORT ALV_ITAB FROM MEMORY ID 'ABC'.
copied HBRO20 to ZHBRO20.
Thanks,
Raju

Hi,
you could also try
FIELD-SYMBOLS: <fc> .
CONSTANTS: c_table(21) VALUE '(PROGRAM_NAME)INTERNAL_TABLENAME[]'.
ASSIIGN (c_table) TO <fc>.
Depends on the process, of course.
Cheers,
Stefan.

Add a Z field in the VBAP table and include that in the custom IDoc Struct

Similar Messages

Maybe you are looking for