Add Analysis Services in Sql Server 2008
In my computer, i installed a server of SQL Server. On currency install, i selected Instance features: Analysis services. But when i find Analysis services, i can not see it. Now, how can add to Analysis Sercives.Help me!!!
As Mr. Olaf Helper said all you have to do is add Analysis Service as a new one on your existing instance here is what you have to do if you are new for this
1-Click on Start on your computer >>>All Programs>>>Click on Microsoft SQL Server 2008 >>>Configuration Tools>>>SQL Server Installation
Center
2- Click on New Installation or Add Feature to an Existing Installation as shown below
and then click on Analysis Service as shown on here
and then from this follow the installation wizard and you should be able to install it.
I hope this elaborate more for your installation problem and goodluck
Please remember to click “Mark as Answer” on the post that has answered your question as it is very relevant to other community members dealing with same problem in seeking the right answer
Similar Messages
-
Data services with SQL Server 2008 and Invalid time format variable
Hi all
Recently we have switched from DI on SQL Server 2005, to DS(Date Services) on SQL Server 2008. However I have faced an odd error on the query that I was running successfully in DI.
I validate my query output using a validation object to fill either Target table (if it passes), or the Target_Fail table (if it fails). Before sending data to the Target_Fail table, I map the columns using a query to the Target_Fail table. As I have a column called 'ETL_Load_Date' in that table, which I should fill it with a global variable called 'Load_Date'. I have set this global variable in the script at the very first beginning of the job. It is a data variable type:
$Load_Date = to_char(sysdate(),'YYYY.MM.DD');
When I assign this global variable to a datetime data type cloumn in my table and run the job using Data Services, I get this error:
error message for operation <SQLExecute>: <[Microsoft][ODBC SQL Server Driver]Invalid time format>.
However I didn't have this problem when I was running my job on the SQL Server 2005 using Data Integrator. The strange thing is that, when I debug this job, it runs completely successfully!!
Could you please help me to fix this problem?
Thanks for your help in advance.Thanks for your reply.
The ETL_Date is a datetime column and the global variable is date data type. I have to use the to_char() function to be able to get just the date part of the current system datetime. Earlier I had tried date_part function but it returns int, which didn't work for me.
I found what the issue was. I don't know why there were some little squares next to the name of the global variable which I had mapped to the ETL_Date in the query object!!! The format and everything was OK, as I had the same mapping in other tables that had worked successfully.
When I deleted the column in the query object and added it again, my problem solved. -
How to find Collation setting for Analysis services in Sql server 2000
Hi
Can some please guide me how do I check Collation setting for Analysis services in Sql server 2000
i need it to install Analysis servcies on my machineHi SMV123,
We can find the collation settings for Analysis services in SQL Server Management Studio (SSMS). Connect to the SSAS instance from within SSMS->Right click on the instance and select Properties->An Analysis Server properties page will appear. And then
on the left hand side is a Language /collation option.
Besides, here is a link about how to install SQL Server Analysis Services 2000 for your reference.
How to Install SQL Server 2000 Analysis Servicese
Regards,
Charlie Liao
Charlie Liao
TechNet Community Support -
Sql server 2008 service accounts.
For Sql server agent and Sql Server Database engine a dedicated low privileged
separate accounts are assigned while installing Sql Server 2008 R2.But when
I am specifying Sql Server feature installation in the setup role and in feature
selection I am selecting all ,what should be the nature of accounts that I should
provide for Sql Server Analysis Service and Sql Server Reporting Services?
If I install Sqlserver 2008R2 in my local machine running under windows-7
and use a local standard user account to run my DB engine, would I be
able to access the databases in Sql Server 2008 installed in a remote
server in the same domain?I agree with Erland.
SQL Service account is used while performing any OS level operation by SQL Server process (sqlservr.exe). On the other hand, the account which is connecting to SQL Server will have it's own permission in Server/Database provided via Logins/Users.
Balmukund Lakhani | Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle -
Upgrade sql server 2008 to 2014
Hello,
1- is it possible to install 2014 while 2008 is installed. And then restore the 2008 database into the 2014 version?
2- is 2014 version out and can it be fully used now?
ThanksSQL Server edition
Definition
Enterprise (64-bit and 32-bit)
The premium offering, SQL Server 2014 Enterprise edition delivers comprehensive high-end datacenter capabilities with blazing-fast performance, unlimited virtualization, and end-to-end business intelligence — enabling
high service levels for mission-critical workloads and end user access to data insights.
https://msdn.microsoft.com/en-us/library/ms144275.aspx
SQL Server Data Tools - Business
Intelligence (SSDT-BI) includes SQL Server Analysis Service Projects, SQL Server Reporting Services
Projects, and SQL Server Integration Services Projects hosted in Visual Studio. SSDT-BI
tools can be downloaded and installed as free tools from the web.
http://blogs.technet.com/b/dataplatforminsider/archive/2013/11/13/microsoft-sql-server-data-tools-update.aspx -
I need to build a solution containing a database project and an integration services project for SQL Server 2008R2. Apparently, the subset of Visual Studio tools that comes with SQL Server 2008R2 does not include database projects and does not have
Team Foundation Server support. Because of those limitations, I am trying to determine which version of Visual Studio will allow me to:
1. Build a single solution that includes both a database project and an Integration Services project
2. For the database project, be able to import a database schema from an existing SQL Server 2008 R2 database, do schema compares and update the project from the database and vice versa
3. For the Integration Services project, be able to deploy the packages to SQL Server Integration Services on SQL Server 2008 R2 (that is, to the msdb database).
4. Use Team Foundation Server for source control of the whole solution, including both project types.Hi G Britton,
To build a solution containing a database project and an integration services project for SQL Server 2008 R2 and use Team Foundation Server for source control.
You can choose to install Visual Studio 2008.
And as you want to utilize Schema compare and/or Data compare functionalities in Visual Studio, you will need to install the
Visual Studio Team System 2008 Database Edition or Visual Studio Team System 2008 Team Suite.
In addition, for Visual Studio issues, I would like to recommend you post the question in the
Visual
Studio forums to get better support.
Reference:
Team Foundation Version Control
Compare and Synchronize Database Schemas
Interoperability and Coexistence (Integration Services)
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support -
Hi Vivek ;
How to install Data Quality Services in SQL Server 2008 R2.
Please give me solution.
Thanks & RegardsDQS is shipped only with SQL 2012 onwards.
In SQL 2008 R2 you need to use some kind of third party solutions for data Cleasing. One such solution is Mellisa data cleansing component which can be configured and used inside SSIS.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
How to configure USER CAL on SQL server 2008
how to configure or Add User CAL on SQL server 2008?
pls let me know the processHello,
There is no CAL management in SQL Server, you have the licenses only "on paper".
Olaf Helper
[ Blog] [ Xing] [ MVP] -
SQL SERVER 2008 R2 Analysis Services
Hi
We have a SQL Server 2008 R2 Analysis Services and it was running fine but suddenly its not processing the cube. I have checked log the file msmdsrv.log and there its continuously logging the following error message.
Message: The file '\\?\C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Data\TRCOLAP.0.db\Fact SL Financial Transaction.0.dim\466.SL Journal Type.kstore' could not be opened. Please check the file for permissions or see if other applications
locked it. (Source: \\?\C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210023)
Would really appreciate help in this regard. It our production box
Thanks
inazakatHi Inazakat,
According to your description, your SQL Server Analysis Services database cannot be processed that can be processed without any problems before, right?
Based on the message, file could not be opened. Please check the file for permissions or see if other applications locked it. It seems that the file is corrupt. This issue can be caused by that the file was deleted by antivirus. You can go to the corresponding
folder and check if this file exist or not. If this file was deleted or corrupt, you can open the original project on BIDS, and redeploy it to your server. And then process this database.
Regards,
Charlie Liao
TechNet Community Support -
SQL Server 2008 Analysis Services and OBI EE
Hello,
How to use the Multidimensional import functionality of the BI EE Administration against a cube stored in a SQL Server 2008 Analysis Services?
Thanks,
PaulThanks Christian,
The article you mention takes for granted that a valid Analysis Services XMLA URL is present, which is not my case.
I have found a good article on how to configure specifically Analysis Services 2008 here:
http://bloggingabout.net/blogs/mglaser/archive/2008/08/15/configuring-http-access-to-sql-server-2008-analysis-services-on-microsoft-windows-server-2008.aspx
The article is the nearest I could find from my particular software platform (Vista).
What I'm currently dealing with is [nQSError: 64203] "XMLAnalysisError.0xc1010000", which is probably some security setting I have to get right. I will keep the thread updated if I move on.
Thanks,
Paul -
Installation issue : sql server 2008 r2 some services failed to installed on windows 7
I have been facing this problem while installing sql server 2008 r2.. i tried so many times but same result .. it shows sql server installed with some errors
database engine service : failed
SQL Server Replication : failed
Full-Text Search : failed
Analysis Services : failed
Reporting Services : failed
And my Log file (or) summary file is (it is in C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log):
Overall summary:
Final result: User cancelled
Exit code (Decimal): -2068380094
Exit facility code: 1207
Exit error code: 1602
Exit message: User has cancelled.
Start time: 2014-08-14 21:15:26
End time: 2014-08-14 21:23:58
Requested action: AddNode
Machine Properties:
Machine name: MANJU-PC
Machine processor count: 4
OS version: Windows Vista
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER Database Engine Services
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER SQL Server Replication
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER Full-Text Search
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSAS10.MSSQLSERVER Analysis Services
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSRS10.MSSQLSERVER Reporting Services
1033 10.0.1600.22
No
Sql Server 2008
Management Tools - Basic 1033 Developer Edition
10.0.1600.22 No
Sql Server 2008
Management Tools - Complete 1033 Developer Edition 10.0.1600.22
No
Sql Server 2008
Client Tools Connectivity 1033 Developer Edition 10.0.1600.22
No
Sql Server 2008
Client Tools Backwards Compatibility 1033 Developer Edition 10.0.1600.22 No
Sql Server 2008
Client Tools SDK 1033
Developer Edition 10.0.1600.22 No
Sql Server 2008
Integration Services 1033 Developer Edition
10.0.1600.22 No
Package properties:
Description: SQL Server Database Services 2008
SQLProductFamilyCode: {628F8F38-600E-493D-9946-F4178F20A8A9}
ProductName: SQL2008
Type: RTM
Version: 10
SPLevel: 0
Installation location: D:\Softwares\JAVA & .NET SW\SQL Server 2008\SQL Server 2008\x86\setup\
Installation edition: DEVELOPER
User Input Settings:
ACTION: AddNode
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: *****
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
CONFIGURATIONFILE:
FAILOVERCLUSTERGROUP:
FAILOVERCLUSTERNETWORKNAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTANCENAME: <empty>
MEDIASOURCE: D:\Softwares\JAVA & .NET SW\SQL Server 2008\SQL Server 2008\
PID: *****
QUIET: False
QUIETSIMPLE: False
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: *****
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140814_210558\ConfigurationFile.ini
Detailed results:
Feature: Integration Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools SDK
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Backwards Compatibility
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Business Intelligence Development Studio
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140814_210558\SystemConfigurationCheck_Report.htm
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Chainer.Infrastructure.CancelException
Message:
User has cancelled.
Stack:
at Microsoft.SqlServer.Configuration.UIExtension.Request.Wait()
at Microsoft.SqlServer.Configuration.UIExtension.UserInterfaceProxy.SubmitAndWait(Request request)
at Microsoft.SqlServer.Configuration.UIExtension.UserInterfaceProxy.NavigateToWaypoint(String moniker)
at Microsoft.SqlServer.Configuration.UIExtension.UserInterfaceService.Waypoint(String moniker)
at Microsoft.SqlServer.Configuration.UIExtension.WaypointAction.ExecuteAction(String actionId)
at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)Requested action: AddNode
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER Database Engine Services
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER SQL Server Replication
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER Full-Text Search
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSAS10.MSSQLSERVER Analysis Services
1033 10.0.1600.22
No
Sql Server 2008 MSSQLSERVER MSRS10.MSSQLSERVER Reporting Services
1033 10.0.1600.22
No
Sql Server 2008
Management Tools - Basic 1033 Developer Edition
10.0.1600.22 No
Sql Server 2008
Management Tools - Complete 1033 Developer Edition 10.0.1600.22
No
Sql Server 2008
Client Tools Connectivity 1033 Developer Edition 10.0.1600.22
No
Sql Server 2008
Client Tools Backwards Compatibility 1033 Developer Edition 10.0.1600.22 No
Sql Server 2008
Client Tools SDK 1033
Developer Edition 10.0.1600.22 No
Sql Server 2008
Integration Services 1033 Developer Edition
10.0.1600.22 No
Instead of installing SQL server instance you selected add node which is to be selected when SQL server installation is to be made on Node which is being added to cluster. Since your OS is not clustered I am sure you selected worng option.
Please right click on setup file and select run as administrator. Now installation window which pops up on that on left hand side select
installation and then on page that appears select 'New server standalone installation or add feature to existing installation'.
You already have SQL server 2008 installed on your machine as per feature discovery report
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
An error occurred attempting to install SQL Server 2008 Express Service Pack 1
i have Setup application with complete prerequisite requirement package create from Visual Studio 2010 setup application.And yes this setup working fine in windows 7 and windows vista but not working in windows xp service pack 3.and getting error when install "An error occurred attempting to install SQL Server 2008 Express Service Pack 1"Give me solution as soon as possible.I have listed summery.txt and log.txt. please refer it.Summery.txt
===============================================================Component SQL Server 2008 Express has failed to install with the
following error message:
"An error occurred attempting to install SQL Server
2008 Express Service Pack 1."
The following components were successfully
installed:
- Microsoft .NET Framework 4 Client Profile (x86 and
x64)
The following components failed to install:
- SQL Server 2008
Express
See the setup log file located at
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\install.log' for more
information.Install.log
==========================================================================The following properties have been set:
Property: [AdminUser]
= true {boolean}
Property: [InstallMode] = HomeSite {string}
Property:
[ProcessorArchitecture] = Intel {string}
Property: [VersionNT] = 5.1.3
{version}
Running checks for package 'Windows Installer 3.1', phase
BuildList
The following properties have been set for package 'Windows
Installer 3.1':
Running checks for command
'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe'
Result of running
operator 'VersionGreaterThanOrEqualTo' on property 'VersionMsi' and value '3.1':
true
Result of checks for command
'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe' is
'Bypass'
'Windows Installer 3.1' RunCheck result: No Install
Needed
Running checks for package 'Microsoft .NET Framework 4 Client Profile
(x86 and x64)', phase BuildList
Reading value 'Version' of registry key
'HKLM\Software\Microsoft\NET Framework Setup\NDP\v4\Client'
Unable to read
registry value
Not setting value for property
'DotNet40Client_TargetVersion'
The following properties have been set for
package 'Microsoft .NET Framework 4 Client Profile (x86 and x64)':
Running
checks for command 'DotNetFX40Client\dotNetFx40_Client_x86_x64.exe'
Result of
running operator 'ValueEqualTo' on property 'InstallMode' and value 'HomeSite':
true
Result of checks for command
'DotNetFX40Client\dotNetFx40_Client_x86_x64.exe' is 'Bypass'
Running checks
for command 'DotNetFX40Client\dotNetFx40_Client_setup.exe'
Result of running
operator 'ValueNotEqualTo' on property 'InstallMode' and value 'HomeSite':
false
Skipping ByPassIf because Property 'DotNet40Client_TargetVersion' was
not defined
Result of running operator 'ValueEqualTo' on property 'AdminUser'
and value 'false': false
Result of running operator 'VersionLessThan' on
property 'VersionNT' and value '5.1.2': false
Result of running operator
'ValueEqualTo' on property 'ProcessorArchitecture' and value 'IA64':
false
Result of checks for command
'DotNetFX40Client\dotNetFx40_Client_setup.exe' is 'Install'
'Microsoft .NET
Framework 4 Client Profile (x86 and x64)' RunCheck result: Install
Needed
Running checks for package 'SQL Server 2008 Express', phase
BuildList
Running external check with command
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SqlExpressChk.exe' and
parameters '10.0.1600 1033'
Process exited with code 2
Setting value '2
{int}' for property 'SQLExpressChk'
The following properties have been set
for package 'SQL Server 2008 Express':
Property: [SQLExpressChk] = 2
{int}
Running checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE'
Result of running operator
'ValueNotExists' on property 'VersionNT': false
Result of running operator
'VersionLessThan' on property 'VersionNT' and value '5.1.2': false
Result of
running operator 'VersionEqualTo' on property 'VersionNT' and value '5.2.0':
false
Result of running operator 'VersionEqualTo' on property 'VersionNT' and
value '5.2.1': false
Result of running operator 'ValueEqualTo' on property
'AdminUser' and value 'false': false
Result of running operator
'ValueEqualTo' on property 'SQLExpressChk' and value '-1': false
Result of
running operator 'ValueEqualTo' on property 'SQLExpressChk' and value '-2':
false
Result of running operator 'ValueEqualTo' on property 'SQLExpressChk'
and value '-3': false
Result of running operator 'ValueEqualTo' on property
'SQLExpressChk' and value '-4': false
Result of running operator
'ValueLessThan' on property 'SQLExpressChk' and value '-4': false
Result of
running operator 'ValueNotEqualTo' on property 'ProcessorArchitecture' and value
'Intel': false
Result of running operator 'ValueNotEqualTo' on property
'SQLExpressChk' and value '1': true
Result of checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE' is 'Bypass'
Running checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE'
Result of running operator
'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'Intel':
false
Result of running operator 'ValueNotEqualTo' on property
'SQLExpressChk' and value '2': false
Result of checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE' is 'Install'
Running checks for
command 'SqlExpress2008\SQLEXPR_x64_ENU.EXE'
Result of running operator
'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'amd64':
true
Result of checks for command 'SqlExpress2008\SQLEXPR_x64_ENU.EXE' is
'Bypass'
Running checks for command
'SqlExpress2008\SQLEXPR_x64_ENU.EXE'
Result of running operator
'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'amd64':
true
Result of checks for command 'SqlExpress2008\SQLEXPR_x64_ENU.EXE' is
'Bypass'
'SQL Server 2008 Express' RunCheck result: Install Needed
EULA
for components 'Microsoft .NET Framework 4 Client Profile (x86 and x64)' was
accepted.
EULA for components 'SQL Server 2008 Express' was
accepted.
Copying files to temporary directory
"C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\"
Downloading files to
"C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\"
(11/15/2014 3:59:51 PM)
Downloading 'DotNetFX40Client\dotNetFx40_Client_setup.exe' from 'http://go.microsoft.com/fwlink/?linkid=182804'
to 'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\'
Download completed at
11/15/2014 3:59:53 PM
Verifying file integrity of
C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\DotNetFX40Client\dotNetFx40_Client_setup.exe
WinVerifyTrust
returned 0
File trusted
(11/15/2014 3:59:53 PM) Downloading
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE' from 'http://go.microsoft.com/fwlink/?LinkID=153228&clcid=0x409'
to 'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\'
Download completed at
11/15/2014 4:00:22 PM
Verifying file integrity of
C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SQLEXPR32_x86_ENU.EXE
WinVerifyTrust
returned 0
File trusted
Running checks for package 'Microsoft .NET
Framework 4 Client Profile (x86 and x64)', phase BeforePackage
Reading value
'Version' of registry key 'HKLM\Software\Microsoft\NET Framework
Setup\NDP\v4\Client'
Unable to read registry value
Not setting value for
property 'DotNet40Client_TargetVersion'
The following properties have been
set for package 'Microsoft .NET Framework 4 Client Profile (x86 and
x64)':
Running checks for command
'DotNetFX40Client\dotNetFx40_Client_setup.exe'
Result of running operator
'ValueNotEqualTo' on property 'InstallMode' and value 'HomeSite':
false
Skipping ByPassIf because Property 'DotNet40Client_TargetVersion' was
not defined
Result of running operator 'ValueEqualTo' on property 'AdminUser'
and value 'false': false
Result of running operator 'VersionLessThan' on
property 'VersionNT' and value '5.1.2': false
Result of running operator
'ValueEqualTo' on property 'ProcessorArchitecture' and value 'IA64':
false
Result of checks for command
'DotNetFX40Client\dotNetFx40_Client_setup.exe' is 'Install'
'Microsoft .NET
Framework 4 Client Profile (x86 and x64)' RunCheck result: Install
Needed
Verifying file integrity of
C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\DotNetFX40Client\dotNetFx40_Client_setup.exe
WinVerifyTrust
returned 0
File trusted
Installing using command
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\DotNetFX40Client\dotNetFx40_Client_setup.exe'
and parameters ' /q /norestart /ChainingPackage ClientX64ClickOnce /lcid
1033'
Process exited with code 0
Running checks for package 'Microsoft
.NET Framework 4 Client Profile (x86 and x64)', phase AfterPackage
Reading
value 'Version' of registry key 'HKLM\Software\Microsoft\NET Framework
Setup\NDP\v4\Client'
Read string value '4.0.30319'
Setting value
'4.0.30319 {string}' for property 'DotNet40Client_TargetVersion'
The
following properties have been set for package 'Microsoft .NET Framework 4
Client Profile (x86 and x64)':
Property: [DotNet40Client_TargetVersion] =
4.0.30319 {string}
Running checks for command
'DotNetFX40Client\dotNetFx40_Client_setup.exe'
Result of running operator
'ValueNotEqualTo' on property 'InstallMode' and value 'HomeSite':
false
Result of running operator 'VersionGreaterThanOrEqualTo' on property
'DotNet40Client_TargetVersion' and value '4.0.30129': true
Result of checks
for command 'DotNetFX40Client\dotNetFx40_Client_setup.exe' is
'Bypass'
'Microsoft .NET Framework 4 Client Profile (x86 and x64)' RunCheck
result: Install Succeeded
Running checks for package 'SQL Server 2008
Express', phase BeforePackage
Running external check with command
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SqlExpressChk.exe' and
parameters '10.0.1600 1033'
Process exited with code 2
Setting value '2
{int}' for property 'SQLExpressChk'
The following properties have been set
for package 'SQL Server 2008 Express':
Property: [SQLExpressChk] = 2
{int}
Running checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE'
Result of running operator
'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'Intel':
false
Result of running operator 'ValueNotEqualTo' on property
'SQLExpressChk' and value '2': false
Result of checks for command
'SqlExpress2008\SQLEXPR32_x86_ENU.EXE' is 'Install'
'SQL Server 2008 Express'
RunCheck result: Install Needed
Verifying file integrity of
C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SQLEXPR32_x86_ENU.EXE
WinVerifyTrust
returned 0
File trusted
Installing using command
'C:\DOCUME~1\BS\LOCALS~1\Temp\VSD8C9.tmp\SqlExpress2008\SQLEXPR32_x86_ENU.EXE'
and parameters '/q /hideconsole /action=Upgrade /instancename=SQLEXPRESS
/skiprules=RebootRequiredCheck'
Process exited with code
-2068578302
Status of package 'Microsoft .NET Framework 4 Client Profile (x86
and x64)' after install is 'InstallSucceeded'
Status of package 'SQL Server
2008 Express' after install is 'InstallFailed'
S S ManneHi Manne,
As your description, you come across an error when trying to install SQL Server 2008 express Service Pack 1 on windows XP Service Pack 3 machine. From your error log, I get the error(unable to read registry value). As my analysis, the issue could be due
to that your account doesn't have access to registry. Below are the recommendations for troubleshooting the issue.
1. Make sure that you log in as an administrator of the machine.
2. Please follow the steps below to make sure that you have granted the right permission to registry.
a. Located HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server in registry.
b. Right click and go to Permission, then you could see user accounts or groups. If your user account is not in the list, you could click Add to add your account there.
c. Select your account and Click on Advance.
d. Check on both check box ('Include inheritable permissions from this object's parent'.
and 'Replace all child object permissions with inheritable permissions from this object'), click OK.
e. Click OK again.
Regards,
Michelle Li -
Things to consider when removing from AD domain a SQL Server 2008 which includes Reporting Services
Do any one have a link to a list of things to consider when removing from AD domain a SQL Server 2008 which includes Reporting Services, Analysis Services and Integration Services?
I am taking from an Active Directory domain several servers with SQL 2008 and Reporting Services, Analysis Services and Integration Services. The server will stay on its own without association to any domain, the server will keep its IP address and
the server will not change names.
I have done some research and I got the basic steps including, removing the user accounts from the domain, changing the services accounts, changing jobs and databases from being owned by users from the domain. But...
Are there other things in Reporting Services, Analysis Services and Integration Services internal databases that have an association with the domain AND that will fail after no longer being in the domain?
I've heard of Reporting Services subscriptions failing when the domain user account is no longer there...Are there any other got ya's that any one has encountered?
Please advice.
Note: I am posting in this forum basically because of what I heard on Reporting Services, but it may be a better idea to post into a more broad forum such as SQL Server Migration section.
Thanks beforehand
PaulinoDo any one have a link to a list of things to consider when removing from AD domain a SQL Server 2008 which includes Reporting Services, Analysis Services and Integration Services?
I am taking from an Active Directory domain several servers with SQL 2008 and Reporting Services, Analysis Services and Integration Services. The server will stay on its own without association to any domain, the server will keep its IP address and
the server will not change names.
I have done some research and I got the basic steps including, removing the user accounts from the domain, changing the services accounts, changing jobs and databases from being owned by users from the domain. But...
Are there other things in Reporting Services, Analysis Services and Integration Services internal databases that have an association with the domain AND that will fail after no longer being in the domain?
I've heard of Reporting Services subscriptions failing when the domain user account is no longer there...Are there any other got ya's that any one has encountered?
Please advice.
Note: I am posting in this forum basically because of what I heard on Reporting Services, but it may be a better idea to post into a more broad forum such as SQL Server Migration section.
Thanks beforehand
Paulino -
Analysis Server for sql server 2008 r2 express?
Not sure if this is a forum where I could ask about how I could obtain analysis server for sql server 2008 R2 express - only for academic purposes (not doing any production stuff - just getting up to speed on OLAP, creating fact tables, star schema,
snowflake schema, ...). Suggestions appreciated how I may obtain a version of analysis server for sql server 2008 R2 Express -- or if this is not a good forum to ask that question then I would be grateful for being pointed to the proper forum.
Thanks
Rich PSQL Express Edition Doesn't support analysis services.
http://msdn.microsoft.com/en-us/library/cc645993(v=sql.105).aspx#SSAS
As Li said, you need to go with the developer edition.
-Prashanth -
SQL Server 2008 Service Pack 1 installation problem
I am using Windows 7.
Today I saw "Microsoft SQL Server 2008 Service Pack 1 (KB968369)" as an optional update in the updates list. I've tried to intstall it but it failed with Code CF2E222F. I found nothing about this code on the internet.
I've also tried to install the sp manually. I've downloaded it an tried to install. But it also failed.
SQL Server Setup has encountered the following error: C:\Windows\Installer\9bcac.msi.
Any suggestions?Here's the summary:
Overall summary:
Final result: The patch installer has failed to update the shared features. To determine the reason for failure, review the log files.
Exit code (Decimal): -819060177
Exit facility code: 1838
Exit error code: 8751
Exit message: C:\Windows\Installer\9bcac.msi
Start time: 2010-04-28 10:10:14
End time: 2010-04-28 10:11:02
Requested action: Patch
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20100428_100952\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.0.2531.0%26EvtType%3d0x4C9229A1%400x2FCB8C55
Machine Properties:
Machine name: MACHINE_NAME
Machine processor count: 4
OS version: Windows Vista
OS service pack:
OS region: Türkiye
OS language: English (United States)
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature Language Edition Version Clustered
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER Database Engine Services 1033 Developer Edition 10.1.2531.0 No
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER SQL Server Replication 1033 Developer Edition 10.1.2531.0 No
Sql Server 2008 MSSQLSERVER MSSQL10.MSSQLSERVER Full-Text Search 1033 Developer Edition 10.0.1600.22 No
Sql Server 2008 MSSQLSERVER MSAS10.MSSQLSERVER Analysis Services 1033 Developer Edition 10.1.2531.0 No
Sql Server 2008 MSSQLSERVER MSRS10.MSSQLSERVER Reporting Services 1033 Developer Edition 10.1.2531.0 No
Sql Server 2008 RETAILSTORE MSSQL10.RETAILSTORE Database Engine Services 1033 Developer Edition 10.0.1600.22 No
Sql Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS Database Engine Services 1033 Express Edition 10.1.2531.0 No
Sql Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS SQL Server Replication 1033 Express Edition 10.1.2531.0 No
Sql Server 2008 Management Tools - Basic 1033 Developer Edition 10.1.2531.0 No
Sql Server 2008 Management Tools - Complete 1033 Developer Edition 10.1.2531.0 No
Sql Server 2008 Client Tools Connectivity 1033 Developer Edition 10.1.2531.0 No
Sql Server 2008 Client Tools Backwards Compatibility 1033 Developer Edition 10.1.2531.0 No
Sql Server 2008 Client Tools SDK 1033 Developer Edition 10.1.2531.0 No
Sql Server 2008 Integration Services 1033 Developer Edition 10.1.2531.0 No
Package properties:
Description: SQL Server Database Services 2008
SQLProductFamilyCode: {628F8F38-600E-493D-9946-F4178F20A8A9}
ProductName: SQL2008
Type: RTM
Version: 10
SPLevel: 1
KBArticle: KB968369
KBArticleHyperlink: http://support.microsoft.com/?kbid=968369
PatchType: SP
AssociateHotfixBuild: 0
Platform: x86
PatchLevel: 10.1.2531.0
ProductVersion: 10.0.1600.22
GDRReservedRange: 10.0.1000.0:10.0.1099.0;10.0.3000.0:10.0.3099.0
PackageName: SQLServer2008-KB968369-x86.exe
Installation location: g:\2aa334eee83bd39b499730\x86\setup\
User Input Settings:
ACTION: Patch
ALLINSTANCES: False
CLUSTERPASSIVE: False
CONFIGURATIONFILE:
HELP: False
INDICATEPROGRESS: False
INSTANCENAME: <empty>
QUIET: False
QUIETSIMPLE: False
X86: False
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: The rule result report file is not available.
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: System.IO.FileNotFoundException
Message:
C:\Windows\Installer\9bcac.msi
Data:
DisableWatson = true
Stack:
at Microsoft.SqlServer.Chainer.Infrastructure.MsiNativeMethodHelpers.GetDBProperty(ServiceContainer context, String pathToMsi, String propertyName)
at Microsoft.SqlServer.Configuration.MsiExtension.SetPatchInstallStateAction.GetMsiRtmVersion(PackageInstallProperty targetPackage)
at Microsoft.SqlServer.Configuration.MsiExtension.SetPatchInstallStateAction.IsApplicablePatch(PatchProperty currentPatch, PackageInstallProperty targetPackage)
at Microsoft.SqlServer.Configuration.MsiExtension.SetPatchInstallStateAction.ExecuteAction(String actionId)
at Microsoft.SqlServer.Configuration.MsiExtension.ProductInstallProperty.GetInstalledPackages(String instanceName, List`1& installedInstancePackages, List`1& installedSharedPackages, String& returnedErrorMessage)
at Microsoft.SqlServer.Configuration.MsiExtension.ProductInstallProperty.CollectProductData()
at Microsoft.SqlServer.Configuration.FeatureTreeConfigurationBase.LoadFeatureTreeDefinitionAllInstances()
at Microsoft.SqlServer.Configuration.FeatureTreeConfigurationBase.LoadFeatureTreeDefinition()
at Microsoft.SqlServer.Configuration.FeatureTreeConfigurationBase..ctor(ServiceContainer context)
at Microsoft.SqlServer.Configuration.PatchFeatureTree..ctor(ServiceContainer context)
at Microsoft.SqlServer.Configuration.PatchFeatureTree.InitializePatchFeatureTree(ServiceContainer context)
at Microsoft.SqlServer.Configuration.SetupExtension.InitializeUIDataAction.ExecuteAction(String actionId)
at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
Maybe you are looking for
-
Message Services and Alerts !!!
Hi All, I have been trying to post a new message that appears in the Alert/Messages window. I been successfull in that but the problem is that until i restart B1 the new message does not appear in the window. I want to alert the user as soon as the m
-
HT4976 Trying to use Emoji with Ipad 2 paired with Kensington Keyfolio keyboard
I have ipad 2 with Kensington Keyfolio keyboard. Emoji will not display when the keyboard is connected. It works when I disconnect the keyboard and use the touch keyboard. Is Emoji not supported using the Keyfolio keyboard?
-
Hi, I was enabling "Activity Auditing" in BPC 5.1, after which i gave the specs in Manage Data Audit. When I clicked on Save Audit Data Now link to run the synchronization process right away it threw an error Run Error: There is insufficient disk spa
-
Add BP in a target group at account creation
Hello experts ! I'd like to know how in java or ABAP I could automatically add a BP in a target group when the account is created. The BP should after that use a campaign code associated with the target group, immediately after account creation. Than
-
Can someone help me with a Hiearachical tree menu. I try to build one, he works fine, but when a populate the source table I began to receive this erro :FRM-99999 error code 7343. I read in the forum that this is a bug of forms, and I don´t know if t