Add banner scroll buttons to existing timeline

Hello,
So I've created a nice looking animation that I want to appear as part ONE of THREE banners. Now that my animation looks nice, I want to add buttons at the bottom of the screen that allow the user to scroll through the other 2 banners.
I understand that you can add functions to images such as click, hover, etc., but from what I've gathered those are built in the timeline, and I don't want to disturb my current animation. What is the best way to approach adding clickable buttons to my exisitng timeline? Create a new timeline and then convert those buttons to symbols?
I'm a little rough around the edges, I know. But anyone that could comment on my workflow would be greatly appreciated... thanks!

Hi, Fyin-
The click, mouseover, etc. events are separate from the timeline and can be applied to any element. You can create your buttons and apply click events to them directly without affecting your current timeline. Another option is for you to move your existing animation completely into a symbol so that anything that happens on the main timeline will not affect your animation. Hope that bit of advice makes sense! Let us know if you have other questions.
Cheers,
-Elaine

Similar Messages

Scroll buttons in the TimeLine's ScrollBar in AdobePremiere CS6

I see a lot of questions about scroll speed in TimeLine, but I used very intense the scroll buttons, when i had long TimeLines (more than 4 hours) and I was with ZoomIn near 90%.
Does anyone know, is it possible to enable scroll buttons in the TimeLine's ScrollBar in AdobePremiere CS6, as it was in CS5/CS4 ?
CS5 image: http://www.maclife.com/files/u129772/2010/06/premiere_full.jpg
CS6 image: http://www.100acrefilms.com/blog/wp-content/uploads/2012/04/Premiere-Pro-CS6.png
On demo CS5 image, On the bottom margin, the horizontal scrollbar from TimeLine has Left and Right scroll Buttons.
On demo CS6 image, on the bottom margin the horizontal scrollbar from TimeLine doesn't contain any scroll buttons.
Actually there are no scroll buttons available in Premiere CS6, as in a classic scrollbar.
I'd like to have back the scroll buttons in the horizontal scrollbar from the TimeLine, which were available in version CS5, CS4, CS3, Pro2.
In TimeLines with 3 more hours it was very handy to go to right or to left even I had zoomed In.
I pressed on left/right scroll button in TimeLine and I was able to deplace with some (or more) frames in desired side.
Thank you for answers / suggestions.

There are no user settings for this. The scroll bar is now a combo scroll/zoom bar and we're pretty much stuck with it. You can grab the bar and move it around if you like, and I'm happy to report that Premiere Pro CC does now scroll as a usable speed with the mouse wheel. (On my personal Windows 8 system, at least. We'll see if that holds true for my Windows 7 edit rig as well.)

How do I add multiple songs to an existing playlist from the (no longer called) Library? Highlighting multiple songs and clicking the "Add to" button will only add the with the little arrow, not all the highlighted ones!

How do I add multiple songs to an existing playlist from the (no longer called) Library? Highlighting multiple songs and clicking the "Add to" button will only add the one with the little arrow, not all the highlighted ones! I am using the "new" iTunes.

For the moment there isn't a way for us end-users to control what is "matched" or "uploaded." That is purely a result of Apple's server-side algorithms.
To re-add multiple songs at once simply highlight all the songs you want to re-add, then right-click (or Control+click) the list and choose "add to iCloud."

Is it possible to move the "Add.." button at contacts on top of the custom label list? I add a lot of custom lables and tired of scrolling down every time.

Is it possible to move the "Add.." button at contacts on top of the custom label list? I add a lot of custom lables and tired of scrolling down every time.

No way to move any buttons in iOS devices.

"Add New Tab" button does not exist in the Window -Customize Toolbar, and not on my Navigator toolbar. Where can I find one to put on my Navigator toolbar, please?

I see "Add New Window" but..."Add New Tab" button does not exist in the Window -Customize Toolbar any longer, and not on my Navigator toolbar. Where can I find one to put on my Navigator toolbar, please?
Thanks

It's the "+" on the Tab bar. You can move it to the Navigation Toolbar if you prefer. When you start Customize, the + moves to the far right end of the Tab bar. You can drag it where you want (see attached image).
Any luck?

How do I add a submit button to a pdf form?

hello
I am trying to add a submit button to a pdf form... is this possible though forms central or Acrobat Pro?

If it is a PDF you created with FormsCentral, then yes, it should have a Submit button. See this for more info: http://helpx.adobe.com/acrobat-com/formscentral/help/create-fillable-pdf-form.html and http://helpx.adobe.com/acrobat-com/formscentral/help/create-forms-locally-save-them.html
If it's a fillable form created with Acrobat Pro, and you want to collect data with FormsCentral, then you import that existing PDF file into FormsCentral and add a Submit button to the form: http://helpx.adobe.com/acrobat-com/formscentral/help/navigate-formscentral.html#import_exi sting_fillable_pdf_forms
I hope that helps,
Brian

Create row as next row on click of add another row button not on top of it

My af:table is based on a transientVO (all the attributes are transient)
This is just for data entry and not for data retrieval
So i have placed add another row button on my af:table
After i enter data in the first row and click add another row button the data is being moved to second row and the new row is created on top of that
I want the row to be created as next row . not on top of my existing row
How can we do this

would this help you:
http://lucbors.blogspot.com/2010/12/adf-11g-how-to-control-where-new-row-is.html

Add Apex Region Button to a JQuery Dialog Box....

Hello Everyone,
I have created a JQuery dialog box modeled as in http://shijesh.wordpress.com/2010/04/10/jquery-modal-form-in-apex-4/. Now my only question is how do i add a region button inside the JQuery dialog box. Please i need this answer desperately.
Thanks & Regards
John Britto

Hi John,
You should be able to add the button as part of the region that has your first name and last name text fields. Just make sure your using a region position that is part of the region.
If you are using APEX 4 a number of plugins also exist to do the same thing that may make your life easier. An really good example is:
http://www.apex-plugin.com/oracle-apex-plugins/dynamic-action-plugin/skillbuilders-modal-page_138.html
Thanks
Paul

How to add a scrolling text in portrait with iMovie

how to add a scrolling text in portrait with iMovie

This is how i was able to do it. Edit html source.
<div align="center"><marquee id='scroll_news4' bgcolor=#ff9966 "><font color="#000000" size="+1" ><strong>Outlook is down! IT is working on it! </strong></font></marquee></div>
<input type='Button' value='Stop' id ='b1' onClick='button_click()';>
<SCRIPT LANGUAGE="JavaScript">

</script>

How can i import tables from a different schema into the existing relational model... to add these tables in the existing model? plss help

how can i import tables from a different schema into the existing relational model... to add these tables in the existing relational/logical model? plss help
note; I already have the relational/logical model ready from one schema... and I need to add few more tables to this relational/logical model
can I import the same way as I did previously??
but even if I do the same how can I add it in the model?? as the logical model has already been engineered..
please help ...
thanks

Hi,
Before you start, you should probably take a backup copy of your design (the .dmd file and associated folder), in case the update does not work out as you had hoped.
You need to use Import > Data Dictionary again, to start the Data Dictionary Import Wizard.
In step 1 use a suitable database connection that can access the relevant table definitions.
In step 2 select the schema (or schemas) to import. The "Import to" field in the lower left part of the main panel allows you to select which existing Relational Model to import into (or to specify that a new Relational Model is to be created).
In step 3 select the tables to import. (Note that if there are an Foreign Key constraints between the new tables and any tables you had previously imported, you should also include the previous tables, otherwise the Foreign Key constraints will not be imported.)
After the import itself has completed, the "Compare Models" dialog is displayed. This shows the differences between the model being imported and the previous state of the model, and allows you to select which changes are to be applied.
Just selecting the Merge button should apply all the additions and changes in the new import.
Having updated your Relational Model, you can then update your Logical Model. To do this you repeat the "Engineer to Logical Model". This displays the "Engineer to Logical Model" dialog, which shows the changes which will be applied to the Logical Model, and allows you to select which changes are to be applied.
Just selecting the Engineer button should apply all the additions and changes.
I hope this helps you achieve what you want.
David

Add a new button to BID Invitation screen

Hi,
How to Add a new button to Bid Invitation Screen in SRM?
Thanks,
Raveendra

Hi
Which SAP Version you are currently on ? What is the exact requirement ?
If i understand you right, Incase you want to add a button to the existing screen template then it will require standard code change and also you need to plan out how will you will code the logic to activate the button.
There is no BADI which can do this as this is not a SAP funtionality. You need to do a little bit of research on this to get the job done.
Regards
- Atul

[Ai-CS4] How to add an art board to existing document ?

hi all,
can anybody suggest me how to add a new artboard to existing document? I didn't find any ArtBoard Palette in CS4. But in CS5 it is given.
thanks,
D.A

The Artboard panel is new to AiCS5. In CS4, a new artboard can be added by doing either of the two:
1. Pick the Artboard Tool and click-drag it in the canvas area of the Illustrator document.
2. Pick the Artboard Tool, click on the 'New Artboard' button in the Control Panel. Then select the desired size from the list of Artboard Presets in the Control Panel and then click in the desired area of the canvas to add a new Artboard.
Hope this helps.
Neeraj

Cant use Export to Excel functionality for ALV if I add a custom button

Hi,
I have added a custom button the the ALV toolbar by creating a GUI status and using the USER_COMMAND event. However. Now I dont the get the standard ALV toolbar with all the options for sorting, exporting to excel etc.
Can someone show me how I can do both, add my own button to the toolbar as well as use ALV Grid toolbar. Currently the ALV grid standard toolbar has disappeared
Thanks for reading

Hello,
I am not sure how you are creating your ALV report. If you are using FM REUSE_ALV_GRID_DISPLAY there is a parameter callled I_CALLBACK_PF_STATUS . Read the documentation for this field from the doc for the FM. It tells you to copy a standard PF status from fucn group SLVC_FULLSCREEN and then add your new button to that staus.
If you are using class CL_SALV_MODEL_BASE there is a method called set_screen_status that lets you do a similar thing - copy an existing PF status and add your button.
Hope that helps
Regards
Greg Kern

Tabstrib - how to add a tab into a existing tabstrip ?

Hello,
I have add a tab into a existing tabstrip. What is step by step the procedure to do ?
If I go on the existing tabstrip, I can't see the "create a new tab" or something likr that.
Tks,
R

HI,
Double click in the Corner area of TabStrip and enter the number TAB CONTROL in the Attributes pop up window
Or simply drag a Push Button and place on the Tabstrip Control
Cheerz
Ram

Row Level PPR in Advanced Table with Add More Rows Button

<br>
I have programmatically fired PPR event on MessageChoice. But it is in Advanced Table with
Add More Rows Button. When the value is changed in MessageChoice I Show/Hide Custom LOV
through SPEL like this ${oa.BioEmployeePVO.EmpManagerRender} .
But it is <b>hiding the all the ROWS</b> not just the row where the value has been changed.
I even tried with this code and get NULL for rowReference.
String rowReference = pageContext.getParameter(OAWebBeanConstants.EVENT_SOURCE_ROW_REFERENCE);
In Processrequest()
String pageName = pageContext.getRootRegionCode();
     Hashtable params = new Hashtable (1);
     params.put ("param1", pageName);
     Hashtable paramsWithBinds = new Hashtable(1);
    paramsWithBinds.put ("param2",new OADataBoundValueFireActionURL (mcb, "{$AttendeeType}"));
    mcb.setFireActionForSubmit ("empPositionChange", params, paramsWithBinds,false, false);
In ProcessFormRequest() {
if ("empPositionChange".equals(pageContext.getParameter(OAWebBeanConstants.EVENT_PARAM)))
      String rowReference = pageContext.getParameter("param2");
    //    String rowReference = pageContext.getParameter(OAWebBeanConstants.EVENT_SOURCE_ROW_REFERENCE);
     Serializable[] parameters = { rowReference };
      am.invokeMethod("handlePositionChangeEvent", parameters);
<br>

HI Kumar,
Answer to your last post is "yes".
Now to your doubt regarding the code:
Hi Anna
I am trying to understand your code.
FireAction firePartialAction = new FirePartialAction("fireHideEvent"+(i/noOfTlaColSpan));
HideImgBean.setAttributeValue(PRIMARY_CLIENT_ACTION_ATTR,firePartialAction);
1. What is this i/noOfTlaColSpan ?
:)Forget abt this in your case it should be the event name which u r firing and capturing the it in the PFR.
Like FireAction firePartialAction = new FirePartialAction("YOurEventName");
and in PFR u can capture tht as:
if("YOurEventName".equals(pageContext.getParameter(EVENT_PARAM)))
//your logic to invoke AM method
2. I believe this HideImgBean would be MessageChoice for me?
:)Yep ur right
3. This brcdOhInventoryViewUpdateVOImpl would be the Custom PVO(Extending Seeded Base VO)
I create by adding the transient attributes?
:)Yep ur right
4. I cannot understand this code. Could you explain.
:)Please look at my comments in some of the lines .I have explained wht i am doing
if(updateIter==null)
updateIter[0]= invViewVO.createRowSetIterator("updateIter");//This initViewVo should be ur custom VO object
if(cnt>0)
updateIter[0].setRangeStart(0);
updateIter[0].setRangeSize(cnt);
for(int i=0;i<cnt;i++)
row = (brcdOhInventoryViewUpdateVORowImpl)updateIter[0].getRowAtRangeIndex(i);
String selectFlag=(String)row.invokeMethod("getPartNumber");//This getPartNuber should be replaced by the Prim Key inoke methd of ur VO
if(RowID.equals(selectFlag))
//This is my logic to set the transient attributes based on the msgChoiceBean value ..u have to pass the value when u invoke this method
if(reserveMethod.equals("BINARY"))
System.out.println("In Binary");
Boolean bVal= new Boolean("false");
Serializable sr[]={bVal};
Class []methodParamTypes = { bVal.getClass() };
row.invokeMethod("setshowreservetxt",sr,methodParamTypes);
Boolean bVal1= new Boolean("true");
System.out.println("bVal1"+bVal1);
Serializable sr1[]={bVal1};
Class []methodParamTypes1 = { bVal1.getClass() };
row.invokeMethod("setShowreservemsgchoice",sr1,methodParamTypes1);
break;
In my AM I am doing this. Am i doing right?:)Yep u r right
BioPrescribersPVO is the custom VO(extending seeded base VO).
public void handlePositionChangeEvent(String param)
OAViewObject vo = (OAViewObject)findViewObject("BioPrescribersPVO");
OARow row = (OARow)findRowByRef(rowReference);
if (row != null)
String position = (String)row.getAttribute("AttendeeType");
if (("PRESCRIBER".equals(position)) )
// BioEmpManagerRender is the transient attribute in BioPrescribersPVO.
row.setAttribute("BioEmpManagerRender", Boolean.TRUE);
row.setAttribute("BioPresManagerRender", Boolean.FALSE);
else
row.setAttribute("BioEmpManagerRender", Boolean.FALSE);
row.setAttribute("BioPresManagerRender", Boolean.TRUE);
} // end handlePositionChangeEvent()
// Initializing the custom VO
/*No need to initialize the VO because this is not a PVO(Propeties View object)
U r just using the existing VO and tht vo shloud have a primary key.Tht way u can match the rowref u r getting with the actual row from the View object*/
public void init()
OAViewObject appPropsVO = (OAViewObject)getBioPrescribersPVO();
if (appPropsVO != null)
if (appPropsVO.getFetchedRowCount() == 0)
appPropsVO.setMaxFetchSize(0); appPropsVO.executeQuery();
appPropsVO.insertRow(appPropsVO.createRow());
OARow row = (OARow)appPropsVO.first();
row.setAttribute("RowKey", new Number(1));
handlePositionChangeEvent("");
} // end init()
Thanks
Anna

Add banner scroll buttons to existing timeline

Similar Messages

Maybe you are looking for