Add Bus area to CR header not working.(OTC must be supplied)

Hi Experts,
We have used the following doc to allow for business area on the general screen of our change request: Enhancement of the User Interface Building Bloc... | SCN
We have Gone through most of the actions but now encounter an error.
We use transaction GENIL_MODEL_BROWSER > Create Enhancement ZMDG_CR_Additional_Fields but when we assign the new handler class in the root objects CR_ROOT it is giving a dump Exception condition" No Active Data Model" triggered.
When we debug this we are getting OTC 147 for Business partner but our active data model is OG and thus we think it should call for the entities for the OG model.
Where is it fetching this from or is there config that we are missing?
Thanks and best regards
Riaan

Hi sohopigeon, and a warm welcome to the forums!
What to do if your computer won't recognize a FireWire or USB device...
If the issue persists, try these steps:
1. Shut down the computer.
2. Disconnect all devices and all other cables, except the keyboard and mouse cable(s).
3. Disconnect the computer from the power outlet and wait for 3 to 5 minutes.
4. Plug the computer back in and turn it on.
5. Reconnect the device(s) (one at a time if there is more than one) and test. Test with each port if you have more than one.
http://support.apple.com/kb/HT1317
The 7,3 2.3 was PCI-X, I notice this PCI card is NOT for use in PCI-X G5s...
http://eshop.macsales.com/item/Other%20World%20Computing/PCIFW4P/
While this one works in PCI or PCI-X...
http://eshop.macsales.com/item/ADS%20Technologies%20Inc./API315/
Not sure about yours, but it does say...
PCI 2.2 compliant and works in 32-/64-bit PCI slot
Works in 3.3v or 5V PCI slot
The one that doesn't work in yours above is also PCI 2.2 compliant.

Similar Messages

Add shopping cart item functionality is not working in PO

Hi Experts,
I found that Add shopping cart item functionality is not working in Purchase order.
We are raising the Purchase order in SRM and i am trying to use the Add shopping cart item functionality to add the shopping carts line item in to purchase order.
Once I will click on start search, it will give me a list of Approved shopping cat and when I am trying to add any shopping cart in PO line item, nothing is happening and It is not allowing me to add the shopping cart line items in to this PO and also there is no error message.
Please suggest us how i can fix this issue.
Thanks in advance.

HI,
If the shopping cart's have same vendor and company code, then only we can club the shopping carts
in to single PO.
Please go throught it
http://help.sap.com/saphelp_srm40/helpdata/en/38/4cc5376848616ae10000009b38f889/frameset.htm

"Add to Shooping cart" button does not work when changing Product Category

Dear all, we are running SRM 4.0 Classic scenario and we have a strange problem with Product Category field. When click on the "Describe Requirement", it opens the shopping cart page with the Product Category field and the default value is coming from favorites. As long as you dont change this value , enter the other fields and click on the "Add to shopping cart" button, then it works. If the users try to change this value on this page to select a different value from the drop down, then the "Add to Shopping Cart" button does not work. Has anyone encountered this problem before. Users are getting frustrated with this behaviour. Any help to fix this issue is appreciated. Thanks in advance.
Regards
Gabriel Bertrand

Dear Disha, this is what is the behaviour.
Suppose, if for a particular user, there are 4 items listed as favorites in the Product category and one of them is a default value. If you don't make any changes to this value and then click on Add to Shopping Cart, it works. If you try to select a different value other than the default from the favorites, then the Button does not do anything.You click on it nothing happens and cannot go to the next page. Also all the links are disabled (ie Describe Requirement / Old Purchase Order and Template)
If we dont change the value for Product category and go to the next page (with default value) and then change the Product category here, it works (Continue button works and were able to Order or Hold).
Thanks
Regards
Gabriel

Email notifications are the only thing NOT working!!!

Email notifications are the only thing NOT working!!! Everything is set up correctly. The form works and the person submitting gets a message, but I don't. I tried 3 different email addresses and still not working. Any real fix for this?

Hello:
Try resetting the PRAM.
Barry

I DON'T WANT TO UPGRADE OR HAVE AN ADD ON EVER, DISABLING UPDATES DOES NOT WORK, HOW DO I KILL ALL MEASAGES FOR UP GRADES AND ADD ON'S FOR EVER, ONCE AND FOR ALL, COMPLETELY, THE END AND NEVER BE BOTHERED AGAIN EVER!

I DON'T WANT TO UPGRADE OR HAVE AN ADD ON EVER, DISABLING UPDATES DOES NOT WORK, HOW DO I KILL ALL MESSAGES FOR UP GRADES AND ADD ON'S FOR EVER, ONCE AND FOR ALL, COMPLETELY, THE END AND NEVER BE BOTHERED AGAIN EVER! ALSO IF I KILL MYSELF I WILL HOLD YOU PERSONALTY RESPONSIBLE.edit

There is a world of information in these forums if you use the search function near the top right of this page. Just type in NAS for example and you get many threads on the subject (marked with a green checkmark if it solved the question) another example would be Airport Exterme and sound system. Once you formulate your ideas better then specific questions can be addressed one at a time. You may find that a less expensive choice for a server might be a mac mini. Good luck with your project, ask more specific questions and update you systems profile.

RCIPE00: GLT2 201 Balancing field bus.area in line item not filled

Dear Guru,
We transfer posting payroll to FI with journal
Dr    Vendor Non Trade 1
Dr    Vendor Non Trade 2
Dr    Vendor Non Trade 3
Cr    Cross welfare (balance sheet acct.)    Bus.area SBY
Cr    Cross welfare (balance sheet acct.)    Bus.area CMO
Transfer can not posting with error message "Balancing field business area in line item 01 not filled"
I know this come from NewGL/Doc.Splitting, and HR do not apply distribution of liabilities. I read note 1039346 and still confusing about this.
I classify gl payable non trade as vendor, gl cross welfare as balance sheet
Doc.type AB as business transaction variant "unspecified posting"
Please your advice to handle it.
By the way, i looks way to assigned constant business area, however i could not find how to assigned constant to item category or relevant item.
regards,
Dewi

>
Lidwina Ardyan Dewi wrote:
> Dear Guru,
>
> We transfer posting payroll to FI with journal
> Dr    Vendor Non Trade 1
> Dr    Vendor Non Trade 2
> Dr    Vendor Non Trade 3
> Cr    Cross welfare (balance sheet acct.)    Bus.area SBY
> Cr    Cross welfare (balance sheet acct.)    Bus.area CMO
>
> Transfer can not posting with error message "Balancing field business area in line item 01 not filled"
>
> I know this come from NewGL/Doc.Splitting, and HR do not apply distribution of liabilities. I read note 1039346 and still confusing about this.
> I classify gl payable non trade as vendor, gl cross welfare as balance sheet
> Doc.type AB as business transaction variant "unspecified posting"
>
> Please your advice to handle it.
> By the way, i looks way to assigned constant business area, however i could not find how to assigned constant to item category or relevant item.
>
> regards,
> Dewi
Since you are posting a FI journal I assume you are posting as FI-AP document (debiting actual vendor number). If this is the case, you should use other vendor related document type such as KA that is usually assigned to BTV 0300/100.
You are using document type AB which is usually assigned to BTV 0000/0001 that is unspecified category wherein system does not split rather user has to manually split. Suggest try using KA (make sure this is assigned to BTV 0300/100).
There is no functionaliy available for constant Business Area. You may consider using substitution rules or derivation
Ramesh Gupta

I have mp4 videos on my computer that I want to add to itunes...the add a file or folder is not working. Why?

I have mp4 videos on my computer that I want to add to itunes...the add a file or folder is not working. Why?

wait until, Apple fixes it

What does it mean if my location services are turned on, but not working?

What does it mean if my location services are turned on, but not working? It has always worked before. It is turned on in Settings but when I try to use an app that requires location services, it says they are not on, and the little arrow is not appearing at the top of the screen.

thank you...I tried this immediately after noticing but to no avail. I thought the phone died but I kept seeing the light on so I googled some things and it says it may be watered damaged and I'm not sure how.

Mistakenly opened all the folders in my library of music and the Finder stopped working. Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing they reappear

mistakenly opened all the folders in my library of music and the Finder stopped working.
Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing will reappear

mistakenly opened all the folders in my library of music and the Finder stopped working.
Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing will reappear

Is there an outage in the Hamlin, Tx area(79520) phones have not worked for 2 days?

Is there and outage in the Hamlin, Tx area(79520) phons have not worked for 2 days?

This is a peer-to-peer forum; if you have access to a landline, you may want to call Customer Service (800-922-0204) and ask. You also could try contacting Customer Service via chat:
Contact Us | Verizon Wireless

How i can delete a add ons are disabled and have not remove botom ?

how i can delete a add ons are disabled and have not remove botom
http://dl.dropbox.com/u/10490895/screenshot-73.jpg
[http://example.com http://dl.dropbox.com/u/10490895/screenshot-73.jpg]

'''Ctrl+Shift+A''' should also open the Addons Manager.

Hi all, Since I updated to Mavericks I am having trouble with Safari showing all the buttons/clickable options, but they are gray and will not work. Specifically, the Trash Can/Delete and the "Move to" folder button simply do not work. Any ideas?

Hi all, Since I updated to Mavericks I am having trouble with Safari showing all the buttons/clickable options, but they are gray and will not work. Specifically, the Trash Can/Delete and the "Move to" folder button simply do not work. Any ideas?

Please post a screenshot that shows what you mean. Be careful not to include any private information.
Start a reply to this message. Click the camera icon in the toolbar of the editing window and select the image file to upload it. You can also include text in the reply.

In SSRS , after exporting report in excel,wrap text property for cell and freeze column for SSRS table header not working in Excel

I am working no one SSRS my table headers are freeze cangrow property is false and my report is working perfect while rendering data on RDL and i want same report after exporting in Excel also , i want my table header to be freeze and wrap text property
to work after exporting in my report in excel but its not working ,is there any solution ? any patch ? any other XML code for different rendering ?

Hi Amol,
According to your description, you find the wrap text property and fix column is not working after exporting into Excel. Right?
In Reporting Services, when exporting to excel file, it has limitation for textbox.
Text boxes are rendered within one Excel cell. Font size, font face, decoration, and font style are the only formatting that is supported on individual text within an Excel cell.
Excel adds a default padding of approximately 3.75 points to the left and right sides of cells. If a text box’s padding settings are less than 3.75 points and is just barely wide enough to accommodate the text, the text may wrap in Excel.
In this scenario, it supposed to be wrap text unless you merge cells. If cells are merged, word-wrap does not work correctly. If any merged cells exist on a row where a text box is rendered with the
AutoSize property, autosize will not work. For the Fix Data Property, it can't be working in Excel. These are features when exporting to Excel. We can't change it because it's by design.
Reference:
Exporting to Microsoft Excel (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Navigation "Back" and "Forward" buttons are inactive, they do not work at all. How do I fix this?

I have downloaded the latest version of firefox and the navigation buttons in the browser will not work in any way. The "Back" and "Forward" buttons are completely un-usable.

Toolbar misbehavior could be due to a problematic add-on (e.g., theme or extension), or a corrupted settings file. Next time you upgrade -- and for security reasons, it is highly recommended -- try Firefox's Safe Mode to see whether you can pin it on an add-on or custom setting. You also could clear your toolbar settings.
More info on Safe Mode:
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.org/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, restart Firefox in [http://support.mozilla.org/kb/Safe+Mode Safe Mode] using
Help > Restart with Add-ons Disabled
In the Safe Mode dialog, do not check any boxes, just click "Continue in Safe Mode."
Does the toolbar work correctly?
More info on clearing toolbar settings: [[Toolbar keeps resetting]]

Get clicked column header not working

Here's what I'm trying to do:
Have a multi-column listbox of elements. Allow the user to select a few rows he is interrested in (and the become highlighted). Allow sorting of the listbox by clicking on the column headers.
I've got the listbox populating fine, if nothing is selected, the sorting works fine (event structure based on mouseup event of the multi-column listbox, calling to the "get clicked column header" invoke node method sorts the data. The part that is not working is that If the user has elements selected, sorts the listbox, the same elements are selected (not the same rows, but those same elements in whatever row they ended up after being sorted).
What happens is if I select a few rows in the listbox (listbox configured for 0-N elements selectable, highlight entire row), and then click on the column header, the event structure fires off a value change event for the listbox and changes to no elements selected. if I then click the column header again, it fires off the mouse up event and I get the sorting, but now none of the rows are selected. Weird thing is that first time I click the column header and it fires the value change event, a call into get clickced column header returns negative value so it won't tell me which column header the user clicked to "empty" the selection.
Bugger!!!! doesn't work how I want it to.
Funny thing is if I change the listbox over to a 1-N elements selectable, and then select a few rows, and then click on the column header, the event structure fires off the mouse up event and I get the sorting and re-selecting exactly as I would expect.
What's the deal here?? is this a bug, or expected behavior. If it's expected, it would be nice if it were a little more consistent between the different types of listboxes. Also, any good suggestions as to how to allow users to have 0-N selected elements, and be able to sort the listbox and keep the selected rows selected?

Sounds annoying. Here is a variation of my goto method for these types of problems:
Use the MouseDown? event to catch important info like the old value.
Restore the old value at the end of the Mouse Up event.
Some details, like making sure that the down and up clicks are in the same cell.
Use Defer Updates to prevent flashing.
One of many kluges I have around for the MC Listbox....
Attachments:
MCListboxKluge.vi ‏20 KB

Add Bus area to CR header not working.(OTC must be supplied)

Similar Messages

Maybe you are looking for