Add characteristic description

Hi,
On the screen of maintaining like profile (t.code MSDP_FCST1) only the characteristic value is displayed.
I'd like to see also the description; any suggestions?
Thanks,
Mario
Edited by: Mario Adler on Mar 3, 2009 1:38 PM

Hi Adler,
The SAP standard transaction does not have this option. But you can enhance using function group /SAPAPO/MCPR (Package /SAPAPO/MCP2). This can be done by changing the system default settings and create your customised setting.
Regards
R. Senthil Mareeswaran.

Similar Messages

I am putting together a slide show using iphoto and I wanted to add a description on each slide/photo. How can I do that? Also on the choice of music for the silde show, if the slide show is longer than one song can you chose a different song for backgrou

I am putting together a slide show using iphoto and I wanted to add a description on each slide/photo. How can I do that? Also on the choice of music for the silde show, if the slide show is longer than one song can you chose a different song for background music?

This might help
http://www.apple.com/findouthow/photos/#slideshow
Regards
TD

Report painter add characteristis to a librairy

Hello
Like you know we can add some characteristics in report painter into a librairy.
With transaction GCRT, and OSS note 395894 - Numeric variables in reports, it seems that we can add characteristic into a librairy.
Until now I never saw an example to confirm the process to do it. Is it someone can provide one ?
Thanks for all
Philippe

Hi Julien Girard ,
Could you please check the below link :
http://help.sap.com/saphelp_erp2005/helpdata/en/56/32e339b62b3011e10000000a11402f/frameset.htm
Regards,
S.Manu.

In iPhoto (09) I can add a description to a photo which will display when running the slideshow, however when I sync the Album to my iPad and I run slideshow the description does not display, WHY?

In iPhoto (09) I can add a description to a photo which will display when running the slideshow, however when I sync the Album to my iPad and I run slideshow the description does not display, WHY?

I'd ask that on the iPad forum.

How can I add a description to a photo so it will be emailed with the photo?

How can I add a description to a photo that I am going to email so it will be emailed with the photo? For that matter how can I add a description to a photo that will stay with (or on?) the photo?

Add your description as you normally would. Then export the photo using the File -> Export command. In the resulting dialogue you have a number of options. If you check the box at Titles and Descriptions then these wil be written to the IPTC metadata of the files, and available in any app that understands this metadata.
Regards
TD

Cisco ISE: How to add a description of an Internal Endpoint

Hello,
In ACS 5, when adding an Internal Hosts, we could add a description of the host, in addition to the MAC address.
In ISE, there is no such description field available. However, it present in the Internal User but not in Internal Hosts.
How can we do to add description of MAC address device ?
Many thanks,
David

is this what you are looking for , if not let me know

I can add a description and it displays on a slideshow but when I sync it to the iPad the description does not display, Why?

I can add a description to a photo by clicking o the "i" and it will dsiplay on a slideshow but when I sync the album to my iPad the description does not disply, why?

I'd ask that on the iPad forum.

How to add a Description Column in the Content Panel (Bridge CS5)

Hi,
Is it possible to add a Description Column in the Content Panel. If so, how?
I'm talking about the Description from the IPTC Core data and I'm using Bridge CS5.
Thanks in advance,
Frank

This is the screenshot of the Metadata Workspace with the Content Panel (not Metadata Panel). As you can see it shows Name, Label, Keywords etc. but it's not possible to show Description in that list as a column.
I still agree that it would be a big bonus if you could alter this workspace with description field (even with more lines etc) but what Curt shows you might be an alternative. I couldn't help noticing that you have not created your own custom workspaces.
Try and play with this. You have the option to divide the window in 3 columns max but you can create different panels as a row in 1 column.
Grabbing a tab and move it to a new location until a single blue line appears (between the borders, a bit tricky). A vertical blue line means as a column and a horizontal line means a row. A surrounding blue line means same panel but adding as a tab. You can rearrange the tabs by dragging to left or right. under the menu window you can select which panels are visible or use right mouse click menu on top of a panel to choose.
Sadly enough only 3 columns and only one panel of it's kind per workspace, but you can resize the panels also to your own workflow needs.
In Bridge preferences you can change the colors for background in the general tab and in the metadata tab you can select what info to view in certain sections. Personally I have set my IPTC to view only description, keywords, date created and a few other subjects.
That is the nice thing about Bridge, creating custom workspaces, save them and being able to recreate them without problems :-)
I attach some screenshot of my daily workflow (with the luxury of having a 30' screen) but there are plenty of other options possible, don't forget to name and save your workspace.

Add error description from sxmb_moni in alerts in 7.1

Hi Gurus,
My requirement is to add short description from sxmb_moni i.e. from ABAP stack in alert.
I already have check many blogs and marketplace but could not find this.
As per the link Creating Alert Categories - Process Integration Monitoring - SAP Library we can extract this info from adapter engine using SXMS_TO_ADAPTER_ERRTXT but how to achieve this for I.E.
Please let me know if this is possible in any other way around.
Hope my requirement is clear, i just want the description from moni for the failed message in my alerts.
Thanks and Regards
Jitender Gusain

Hi Jitender
We can use following container variables to populate the text inside the alert message
These are more than enough for debugging the message in MONI.
However if you want to add the payload information in the alert message, then u need to use the function module SALERT_CREATE
You can call this function module inside message mapping using RFC look up or via UDF.

How to add characteristic in report without having in the multi provider.

Hi All,
I need one requirement to add characteristic in report that is not available in the multiprovider . That field is available on the table level in the BI. How should i bring same field into report level with out adding MP. Note : should not add new filed in to exiting flow .
Please give suggestion how do approach this scenario .
Regards,
Veera.

Hi ,
If you are working in BI7 then u can use infoset to join the cube and charecteristic(the field that ur going to add), I hope your infoprovider is a cube.
Jay

"Add a description" box in iPhoto'11

In my old version of iPhoto '08, I was able to adjust the size of the photo information dialogue box to type and view a description of a photo. We were able to write paragraphs in the photo information "description" area. In the new version of iPhoto ' 11, I can not enlarge the "Add a description" more than the two lines that are visible. Is there a way to enlarge the "Add a description" so that I can see more than two lines?

Why not post in the iPhoto forum?
https://discussions.apple.com/community/ilife/iphoto

XI Actions: Add Document Descriptions - Values not showing

1. Using Adobe Pro XI (version 11.0.0) I create a new Action and I add the Add Document Description step.
2. I click Specify Settings and enter default values for Title, Subject, Author and Keyword (e.g. as in the screenshot below).
3. I close the dialog box and activate the Prompt User checkbox.
4. I save the action.
When I run this action, the description dialog box comes up, but none of my default values ("a", "b", "c", "d") shows up. This seemed to work well with similar actions in Adobe Pro X.
What goes wrong?
Here is the exported action:
<?xml version="1.0" encoding="UTF-8"?>
<Workflow xmlns="http://ns.adobe.com/acrobat/workflow/2012" title="test add document description" description="" majorVersion="1" minorVersion="0">
<Group label="Untitled">
<Command name="GeneralInfo" pauseBefore="false" promptUser="true">
   <Items>
    <Item name="Author" type="text" value="c"/>
    <Item name="Keywords" type="text" value="d"/>
    <Items name="LeaveAsIs">
     <Item name="Author" type="boolean" value="false"/>
     <Item name="Keywords" type="boolean" value="false"/>
     <Item name="Subject" type="boolean" value="false"/>
     <Item name="Title" type="boolean" value="false"/>
    </Items>
    <Item name="Subject" type="text" value="b"/>
    <Item name="Title" type="text" value="a"/>
   </Items>
</Command>
</Group>
</Workflow>

I just realize that updating from 11.0.0 to the latest patches (11.0.10) resolves the issue.

Add order description in COOIS

Dear All,
I used TC: COOIS to obtain report from production orders, using list "Automatic goods movements".
In that report I haven't production order description, in fact description for the finished good, or semifinished good whichever production order was created.
It is possible to add this description on standard report COOIS, whitout ABAP programmer?
Thanks for your help!
Regards,
Marian

Hi,
You will need help from your abaper on this.
The list - Automatic goods movements is based on structure - IOGOMO & this structure does not contain a field for description. There is an option to extend this structure - CI_IOGOMO. So work with your abaper on this & use the BADI - WORKORDER_INFOSYSTEM & you should be able to display the info you need.
Regards,
Vivek

BEx query characteristic description change

Hi all,
We have some BEx queries that we have changed one of the characteristic description - title only (by dragging the characteristic to the rows, right click, attributes, description).
Lately when we try to refresh the queries the description that shows up is the original one.
Only after saving the query and then execute we can see our own defined description.
Does anyone have an idea to solve this issue for all the queries together?
Thanks in advance.

Thank you A J for your reply.
I want to specify my problem:
We have about 100 BEx queries that were designed by the same person (a top user) at the passed year and are viewed through our SAP Portal by many people every day. When the queries were designed some of the Characteristic's descriptions were change (For example: The characteristic 0MAINTROOM description was changed from ROOM to SITE in some of the queries).
At the passed few days, we have noticed that the description at the portal is the original one (ROOM). We opened the BEx query and we saw that the 0MAINTROOM has the description of SITE . but... After that if we execute the query (by clicking only "Quit and use Query"), the query result is with the description ROOM. Only by saving again the query and then execute - we will see SITE at the result.
We also tried to generate all the queries by using RSRT --> Environment --> Generate Queries but with no success to solve this issue.
Thanks again.

Want more time to read the field "add a description"

When I am writing a long description in the field "add a description" and then I want to read all I have written, I only have about 10 seconds to read the content in the "enlarged field". Is it possible to do something to get more time to read?

Great Now it counts the column as 43, its correct
but I get this error while coming to this line
int j = addressData.RowCount;
                for (int i = 0; i < j; i++)
                    IRfcStructure row = addressData.GetStructure(i);---> Error at this line
ERROR msg:     FIELD FIELDNAME of TABLE [STRUCTURE RFC_DB_FLD] (GETTER): cannot convert CHAR30 into IRfcStructure
so I changed the code to
IRfcStructure row = addressData.GetStructure(i.ToString());
It shows error as: Element 0 of container metadata unknown [RfcInvalidParameter Exception]

Add characteristic description

Similar Messages

Maybe you are looking for