Add code to all Topics in one go

Hello,
I've been trying to figure this out but I just don't understand why this is happening. I'm using sed (in cygwin) to append a javascript and iframe to topics but following the sed all topics become forbidden. It must be with how I did sed so I just wanted to find out:
if there is a way to modify the masterpage with some constant content and it will roll out to all child topics. I am trying to add an iframe and javascript to all topics. The code will be exactly the same for all topics (i've created a dynamic page that will display content base on the parent page). Would I use placeholder? Adobe scripting?

Hi,
The Find replace tool doesn't allow for multiple line replacement.
You can use a third-party tool for that. FAR is quite popular. See http://helpware.net/FAR/
See http://www.adobe.com/devnet/robohelp/articles/robohelp-extendscript.html for an introduction to scripting with RoboHelp.
The following script may be a good example script: http://www.wvanweelden.eu/robohelp/scripts/ierendertags
Be sure to check out the standard script provided by Adobe. Please post back if you have any questions.
Greet,
Willam

Similar Messages

Add-mailboxfolderspermission to all folders, not one at a time

I wanted to add folder permissions to a user but it seem you can only give permission to folders one a time. Bu I wanted to add permissions to all folders at one time, is there a parameter I can use ? Here is the example of adding permissions to the in Inbox
and you have repeat this for other folders. Exchange 2010
Add-MailboxFolderPermission -Identity
[email protected]:\Inbox -User [email protected] -AccessRights Owner

Hi,
I’ve searched a lot and at this time, there is no a command that allows us to set folder permission for multiple folders at a time in Exchange server. I’d like to help you, but we just have single command lines here. Some scripts may help you to achieve
this goal, in order to resolve your problem more efficiently, you can post to Script forum which is staffed by more experts specializing in this kind of problems to get better help.
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?category=scripting
Thanks for your understanding.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

How do I add a code snippet to all topics in project?

I have some java code that I need to add within the header of every topic in my help project. Is there an easy way to do this instead of individually adding topic by topic?

Hi,
What version of RH are you using? What do you mean by header? The section in HTML or just in the top of every topic?
Try a master page/template. You can create a header and add the code in there. Assign the master page to all topics et voila.
Greet,
Willam

Can I access my husband's iTunes acct. from my iPad? I have his permission & pass code. We want to keep all music in one place & family accessible.

Can I access my husband's iTunes acct. from my iPad? i have his permission & pass code. We want to keep all music in one place & family accessible.

If you log into his account and download some of his past purchases on your iPad then you risk tying your iPad to his account for 90 days : iTunes Store: Associating a device or computer to your Apple ID
But it looks like that might change when iOS 8 is released in the Autumn (no date has been announced yet) : http://www.apple.com/ios/ios8/family-sharing/
If you have his content in your computer's iTunes library then you could sync it from there instead of risking the 90 days association on your iPad. If you don't then you could copy it from his computer and then sync it to your iPad e.g. copy his music to a flash drive and then add it to your library via File > Add To Library

[svn] 4804: Bugs: LCDS-548: add code to deal with contentType="application/ xml" with one parameter (avoid

Revision: 4804
Author: [email protected]
Date: 2009-02-02 17:56:22 -0800 (Mon, 02 Feb 2009)
Log Message:
Bugs: LCDS-548: add code to deal with contentType="application/xml" with one parameter (avoid
name/value encoding in that case)
LCDS-405: baseURL on HTTPMultiService should accept URLs which start with "/"
Added convertParametersHandler and convertResultsHandler function hooks to RemoteObject
to support framework code which wants to modify the service behavior.
Moved "properties" from rpc/http/AbstractOperation to rpc/AbstractOperation so we can use
it for customizing the handling of remote object results
Couple of minor ASDoc fixes and one tab -> spaces change
Doc: minor asdoc edits
QE: LCDS QE will verify the bugs in this one
Reviewers: Mete, Pete, Seth, Ed reviewed different parts of this checkin
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-548
http://bugs.adobe.com/jira/browse/LCDS-405
Modified Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/AbstractInvoker.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/AbstractOperation.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/http/AbstractOperation.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/http/HTTPMultiService.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/http/Operation.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/remoting/Operation.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/rpc/remoting/RemoteObject.as

Hello,
How about this as an alternative:
Use a functional global which has 3 cases:
1. open config file - it opens the config file and reads the contents into a string (which is the functional global data), and you only do this one time at the beginning of the program.
2. edit config data - it edits the string, which are really the contents of the file, but doesn't worry about writing to the file. you could even get fancy here, and allow an array of tags and an array of values as input, and it would go update/edit all the tags to have the corresponding values.
3. close config file - it writes the current string data (the functional global data) to the file and closes it.
Using the functions in the string palette, I think you'll find most of the code for that module/functional global will be easy to write.
I hope this helps!
Best Regards,
JLS
Best,
JLS
Sixclear

Adding One Line Code in all tables in Designer Trigger.

I have 300+ tables in my Schema (All tables generated through Designer), I want to add one line of code in the begining of "Before Inset Row Trigger" of all tables, So what is the fastest way of doing that,
Adding One Line Code in all tables in Designer Trigger.
I don't want to go and modify each and every table

You'll have to write a script that reads out the current contents of your triggers, add your line to this contents and dynamically "create or replace" the new trigger text.
Beware, trigger_body column of user/all/dba_triggers is in a column with datatype LONG, so you'll have to use some sort of conversion.
Good luck.
regards,
Rob.

I have a an iMac 27" and am trying to import some videos of a friends wedding into iMovie however one of the movies won't import. It doesn't say why or give any error message or codes. All of the other movies on the card download with out a problem.

I have an iMac 27" and am trying to import some videos of a friends wedding into iMovie however one of the movies won't import. It doesn't say why or give any error message or codes.
All of the other movies on the card download with out a problem. The movie in question is not 'corrupt' as you can watch it in iMovie direct from the SD card but as soon as you try to import it, it just says 'error'. iIve tried moving the file to an external drive ( and other variations on this theme) then importing but have had no luck.
Can anyone please help me.

The mystery remains....
Thanks for the pointers. The file type is .mts (a proprietry sony one).
I have now found some video converter software (Wondershare and iSkysoft) at a cost. Either will convert this file for me into .mp4. This I can then import into iMovie without any problems. I've checked this on the trial versions and it worked well but without paying am left with a giant watermark in the video
The mystery (which I still havent solved) is why did 20 other .mts files import fine and then this one not?
If you could point me in the direction of some free .mts converter software that would be the cherry on the cake.
Thanks

How do I add multiple songs to an existing playlist from the (no longer called) Library? Highlighting multiple songs and clicking the "Add to" button will only add the with the little arrow, not all the highlighted ones!

How do I add multiple songs to an existing playlist from the (no longer called) Library? Highlighting multiple songs and clicking the "Add to" button will only add the one with the little arrow, not all the highlighted ones! I am using the "new" iTunes.

For the moment there isn't a way for us end-users to control what is "matched" or "uploaded." That is purely a result of Apple's server-side algorithms.
To re-add multiple songs at once simply highlight all the songs you want to re-add, then right-click (or Control+click) the list and choose "add to iCloud."

How to add all photos in one Album

Hi,
I bought iMovie yesterday and I have albums in photos application. I want to add all photos in one album to iMovie.
Thanks
Best Regards

They can only be added one at a time, a bit annoying but that's the way.
Add photos
With your project open, scroll the project timeline so that the playhead (the red vertical line) appears over the location where you want to add the photo; you can move the photo later if you want.
If the playhead is resting over a video clip, the photo is added before or after the end of the clip closest to the playhead.
Tap the Media Library button , and then tap the Photos button at the bottom of the screen.
Tap Camera Roll, Photo Library, or an album, and then tap the photo you want to add.
To preview a photo before adding it, tap and hold the photo in the Photo browser until it appears in the pop-up viewer.
The added photo appears for a duration of 3 to 6 seconds, depending on the length of the transitions that appear before and after the photo, but you canchange this duration.
A Ken Burns effect is also applied to the image, which means the camera appears to sweep across and zoom in on the photo. You can adjust this effect. Go to Edit a photo to learn how.
You can ask Apple to fix this in the next update:
http://www.apple.com/feedback/imovie_ios.html

Our service provider add one digit to all nos. After I update all contacts using one of available programs, contacts are updated but messages received appear with pure phone nos not contact name??any fix

Our service provider add one digit to all nos. After I update all contacts using one of available programs, contacts are updated but messages received appear with pure phone nos not contact name??any fix

http://discussions.apple.com/thread.jspa?threadID=2280669&tstart=0

How to updated all program in one way

Hi All,
I have 3000 list of programs and i want to insert one(same) function module in every programs so is there any way through which i can insert it instead of hard coading?
Because there is no sence to edit 3000 program.
Please Help me.

Hi Pradeep,
First create Z table or local file where your will store all program name then create new program with below logic
1) Fetch report name into internal table say it_program
2) Loop on it_program into wa_program
2.1) READ REPORT wa_program INTO it_code . Check sy-subrc. IF 0 then go ahead with next step else CONTINUE.
2.2) Add your logic to insert new FM. Update program line to table it_code.
2.3) INSERT REPORT wa_program FROM it_abapcode.
Endloop.
I think you will face challenge in writing logic which would insert new line of code. All 3000 program will have different logic and different structure. I think you can loop on it_program and check for START-OF-SELECTION or END-OF-SELECTION. You can add your new FM just after start-of-selection or just before end-of-selection.
Let me know if you need more help..
Regards,
Jigar Thakkar.

How and where to add code to login page

I have a login page which uses the Dreamweaver Login Behavior. I want to add code to:
     Check the status of the person loging in (status is the last field in the mySQL authentication table).
          a.     If the person is already logged in, display an error message, and reject the attempt.
          b.     If the person is NOT currently logged in, set his status accordingly, and log him in.
Since the behavior is generated code, and well above my head, I don't know what code to enter, and where to enter it. Here's the code for the form:
<?php require_once('Connections/login.php'); ?>
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
    $theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
return $theValue;
?>
<?php
// *** Validate request to login to this site.
if (!isset($_SESSION)) {
session_start();
$loginFormAction = $_SERVER['PHP_SELF'];
if (isset($_GET['accesscheck'])) {
$_SESSION['PrevUrl'] = $_GET['accesscheck'];
if (isset($_POST['username'])) {
$loginUsername=$_POST['username'];
$password=$_POST['password'];
$MM_fldUserAuthorization = "";
$MM_redirectLoginSuccess = "WOTCPg1.php";
$MM_redirectLoginFailed = "loginerror.php";
$MM_redirecttoReferrer = false;
mysql_select_db($database_login, $login);
$LoginRS__query=sprintf("SELECT UserID, Password FROM authentication WHERE UserID=%s AND Password=%s",
    GetSQLValueString($loginUsername, "text"), GetSQLValueString($password, "text"));
$LoginRS = mysql_query($LoginRS__query, $login) or die(mysql_error());
$loginFoundUser = mysql_num_rows($LoginRS);
if ($loginFoundUser) {
     $loginStrGroup = "";
    //declare two session variables and assign them
    $_SESSION['MM_Username'] = $loginUsername;
    $_SESSION['MM_UserGroup'] = $loginStrGroup;
    if (isset($_SESSION['PrevUrl']) && false) {
      $MM_redirectLoginSuccess = $_SESSION['PrevUrl'];
    header("Location: " . $MM_redirectLoginSuccess );
else {
    header("Location: ". $MM_redirectLoginFailed );
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<script type="text/javascript">
function setFocus()
document.getElementById("username").focus();
</script>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Log-in to IOD</title>
<style type="text/css">

</style>
</head>
<body onLoad="setFocus()" >
<span style="position:absolute; left:3px; top:2px; width:758; height:89;"><img src="sitebuilder/preview/sitebuilder/clipart/bars/regular/horizontal/sleekLines_blue.gif" width="760" height="90" alt="" /></span>
<div id="e2" style="position:absolute; left:13px; top:14px; width:670px; height:32;"><span class="text"><b><span style="font-size: 22px"><font color="#FFFFFF">Sign-in to Information On Demand</font></span><font color="#FFFFFF" size="4"><span style="font-size:22px;line-height:26px;"><br soft="soft" />
</span></font></b></span></div>
<div id="apDiv3">
<p><span style="text-align: center; text-decoration: underline; color: #009; text-transform: capitalize; font-variant: normal; font-weight: bold; line-height: normal; font-style: normal; font-size: 18pt; font-family: Arial, Helvetica, sans-serif;">Customer Sign-In</span><span style="position:absolute; left:12px; top:23px; width:151px; height:65;"><img src="sitebuilder/images/redInfoOnDemandLogo-150x65.jpg" width="149" height="65" alt="" /></span></p>
</div>
<div id="apDiv4">
<form ACTION="<?php echo $loginFormAction; ?>" id="login" name="login" method="POST">
    <p>     </p>
    <p>User Name:<br /><input name="username" type="text" id="username" tabindex="1" size="30" maxlength="30" />
    </p>
    <p>User's Password:<br />
      <input type="password" name="password" id="password" tabindex="2" />
    </p>
    <p>
      <input name="submit" type="submit" class="SubmitButton" id="submit" tabindex="3" style="color:#009; font-weight:bold" value="Sign-in" />
   <input type="reset" name="reset" id="reset" value="Reset" tabindex="4" style="color:#009; font-weight:bold">
    </p>
</form>
</div>
<br />
</div>
</body>
</html>
Here's the code for the script "included" in the first line of the page:
<?php
# FileName="Connection_php_mysql.htm"
# Type="MYSQL"
# HTTP="true"
$hostname_login = "localhost"; // Change to "mysql" when uploaded to Yahoo
$database_login = "infoondemand";
$username_login = "root";   // Change to "creacontech" when uploaded to Yahoo
$password_login = "raisin4312";
$login = mysql_pconnect($hostname_login, $username_login, $password_login) or trigger_error(mysql_error(),E_USER_ERROR);
?>
Could someone help me with this? I'd very much appreciate any assistance.

I should have warned you ealier that I don't know PHP very well, but if I can help nail down the process then hopefully one of the PHP experts can jump in.
I'm still a little fuzzy on what is going on. If Susie and Rodunda both have their own UserIDs and Passwords, then they can both be logged in at the same time, insert records til their hearts content and there will be abolutely no confict at all. The only issue here that may present a problem is if one of them attameps to update a record while the other one is looking at it, or getting ready to make their own modifications.
Also, if Susie and Rodunda have their own user accounts with their own credentials, how is it that one would try to log in using the others' credentials?
At any rate, and hopefully to get closer to a solutions for you, When a user is successfully authenticated, the session variable MM_Username is created. So, simpy by checking for the existence of this session variable can tell you if that use is logged in or not. This check can be placed before any of the login script so that it doesn't interfere with the behavior generated code. And you can choose what to do depending on the condition that exists - such as redirecting immediately to another page, or displaying or hiding a certain region on the page.
Keep in mind that when the page first loads, thel login code is placed in an IF statement that checks the form action, so at first it's ignored and loads the form. When the form is submitted, the IF conditino is met and the code executes. To update the database with a "Logged in or out" value, you first have to place a recordset just after the IF statement that checks the form action, wirte another IF statement to check the value of the field, and then redirect to a logout page or continue with the login.
If you continue with the login, you'll need an Update statement to change the field in the database just before the successful redirect. If you've redirected to a log out page, you'll also need s similar update statement there.
To write the recordset code, you can use DW's wizard and just move the code to where it needs to go. But the DW's update code depend on predeifned recordsets and form actions, so you'll need to find a script or hand code it, I wouldn't recommend trying to use DW's code and then modify it.
So, what do you think, are we getting closer?

Adding a background to all topics

Hi again
I have searched the forum for this and have not found
anything. Has anyone got any ideas as to how to add a watermark to
every topic on a HTML Help File made using RH HTML (X5.01 with 5.02
upgrade)? In RH for Word, you go to the project settings and can
add an image as a watermark there and specify if you want it to
scroll with text or not.
I suppose I can do this on my RH HTML Help File, maybe in my
CSS but I am not very familiar with the way CSS files are displayed
in RH. Is there a style that relates to a topic body and that is
valid for all topics? My watermark is a jpg with the company logo
and apart from adding the relevant code in True Code on each topic,
I do not know how to do this?
Thanks in advance for your help.

1. Select Format > Styles.
2. In the Styles: window, select Background + Text (BODY),
and click Modify...
3. In the Modify Style window, click Format and select
Borders and Shading.
4. In the Borders and Shading.window, select the Shading tab.
5. In the Pattern > Image area, browse for your image and
experiment with the other settings until you get what you want.
Good luck,
Leon

Firefox user when i try to access my gmail,orkut and yahoomail i get this error message Error code: sec_error_expired_certificate All the other sites are working fine please help Plugins installed:

Firefox user
when i try to access my gmail,orkut and yahoomail i get this error message
Error code: sec_error_expired_certificate
All the other sites are working fine
please help
Plugins installed:
== URL of affected sites ==
http://

Hi,
One of my ex-colleagues has installed a NI-DAQ 6.5 in our system. [And I do not see any other naitional instruments card in the CPU of the computer, may be he removed it] I deleted the account and all his files in the system. When I am trying to install version8.0, its not getting installed and giving me a message that I should uninstall the previous version by going to Add/Remove programs in the control panel.
I tried doing that, but the "Change/Remove" button does not seem to work...[There is no response and so unable to install the new version...]
Any idea how can this problem be solved?
It is a windowsXP operating system with SP2 installed on a machine with P4 processor.
Thanks

Sophos Endpoint security: Block all websites except one

I've been trying to find out how to block all websites except one, in an end user, by creating a policy in the Sophos Enterprise Console. I can see an option - Full web control but it requires an appliance. My question is, it is possible block all websites except one with Sophos? I appreciate if anybody knows, and can tell me how. I have downloaded the trial version of Sophos. If it's possible, I'll try Sophos ES for a year, for the end users and servers.
This topic first appeared in the Spiceworks Community

Team Folder in the past was managed by administrators. Administrator can create, edit, delete team folders. The team folder can be published to a group of users, including Active Directory group. It is very convenient to share files and folders with a group of users in the same team. As team groups bigger, it may not be convenient for administrator to manage all the team folders. So it makes sense for administrator to assign some users to be able to manage team folder that they own themselves. Role Manager It usually starts with the role manager by creating a role with Add/Edit/Delete permissions and assign it to users or Active Directory groups. Manage Team Folder The user who are in the private team folder role will be able to manage team folders without seeing all the team folders from everyone. Here is a YouTube Video about...

Add code to all Topics in one go

Similar Messages

Maybe you are looking for