Add column for System OU name to report under Software Updates - C deployment states
I would like to add a column with the System OU name for the States 1-Enforcement state for a deployment report under Software Updates -C Deployments states. I do not know sql. Can someone please let me know that code I need to add to the
report so I can get this information? Any help would be greatly appreciated. SCCM 2012 R2 environment.
MLStev
Use the SQL Report Builder to do that.
Similar Messages
-
Software Updates - C. Deployment States report
Please help me if I run Software Updates - C. Deployment States report. I am getting compliant, below other status so these status means software updates instated? Then why it
is not showing as compliant Installing update(s), successfully installed update(s), waiting for another installation to complete.To see the real compliance of the installed updates you should look at the compliance reports. For a specific software update group you could use the report
Compliance 3 - Update group (per update).
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude -
KMTL - How to add Column for OVER DUE DAYS in report
Dear Concern,
We are Microsoft Dynamics NAV 2013 users, We want a little change on Reminder Report (In report there is due date we inserted column for OVER DUE DAYS right side to Due Date column in we required Expression of which type of formula that
shows us the Over Due Days for particular.
Please every one confirm or suggest for this error.
Thanks & regards,
Laxman SonarHi Laxman Sonar,
Per my understanding that you have an date field(Due Date) in the report and now you want to get the over due days based on this field and display at right of the date field in the report, right?
I have tested on my local environment that we have two method to do this, one is to add the datediff functon in the query to get the overdue days and another method is to using expression in the report.
Details information below for your reference:
Method one:
Modify the query as below to get the new field(OverDue Days):
SELECT DueDate, DATEDIFF(day, DueDate, GETDATE()) AS OverDueDays
FROM tableName
Method Two:
Add an calculated fields and then add the expression below to get the value for this field or just add expression directly in the new field:
=Datediff("d",Fields!DueDate.Value,Today())
If your problem still exists, please try to provide us some sample date and more details information about your requirements.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support -
How to add columns for existing table dynamically?
Hi,
I created table structure only. I want to add columns for this existing table. Columns are not fixed, according to the user choice i need to write code.
Plz give me reply asap.
Thanks
ShirishaHi Shirisha,
I think the following code snippet will help you.
int l_no_cols = 0;
//Get the number of columns in this variable, something like the following
//l_no_cols = wdContext().currentContextElement().get<Context_attribute_name>;
IWDTable l_tab;
IWDTransparentContainer l_tbl_cont = (IWDTransparentContainer)view.getElement("TableDataCont");//ID of Container
l_tab = (IWDTable)view.getElement("TableData");//ID of Table
l_tab.setVisible(WDVisibility.VISIBLE);
l_tab.bindDataSource(wdContext.nodeTable_Data().getNodeInfo());
for(int a = 1; a <=l_no_cols; a++)
//Creating the column
IWDTableColumn l_tab_col = (IWDTableColumn)view.createElement(IWDTableColumn.class,"COL"+a);
//Creating Caption for Column Header
IWDCaption l_tab_cap = (IWDCaption)view.createElement(IWDCaption.class,"Caption"+a);
l_tab_cap.setText("Col"+i);
l_tab_col.setHeader(l_tab_cap);
//Creating Table Cell Editor for column
IWDInputField l_tab_cell = (IWDInputField)view.createElement(IWDInputField.class,"CellEditor"+a);
//creating context node attribute for the column dynamically
wdContext.nodeTable_Data().getNodeInfo().addAttribute("Col"+i,"com.sap.dictionary.String");
l_tab_cell.bindValue(wdContext.nodeTable_Data().getNodeInfo().getAttribute("Col"+i));
l_tab_col.setTableCellEditor(l_tab_cell);
l_tab.addColumn(l_tab_col);
l_tbl_cont.addChild(l_tab);
Regards,
Alka -
Setup and configuration for system monitoring and IT Reporting for Java sys
Hi all,
How to setup and configuration for system monitoring and IT Reporting for Java system ?
How to connect Java system to Solman system?
Regards,
NeniHI,
What is your OS? You can use SAPCCMSR.exe to monitoring IT Reporting Java system on Solman.
Go to solman rz21 create a csmreg user. and configuration fil for agent. copy configuration fil on usr/sap/ccms/..
Go to comman line cd ../user/sap/xxx/sys/exe/.../ wite SAPCCMSR.00 -R pf=< ...../sys/profile/instans profile> .
You can se agent on rz10 and use this connaction on rz20 to monitoring and IT Reporting Java system on Solman.
I hope this help -
I have the latest operating system, but can't get my printers added. Why does the software update say that drivers for my printers are not available? I have the drivers installed from the CD but can't add the printer because it wants to go through software update.
It's pretty difficult to offer suggestions when you say nothing about your Mac, the version of Mac OS it's running, or the models of printers you have. This forum, however, is intended for questions about old, pre-G3 hardware, so unless you are asking about an very old Mac, this is not the forum where you'll be most likely to get help with your problem. I'd suggest you ask this question in the forum for your model of Mac or version of Mac OS X it's running. You'll be more likely to get assistance there, assuming you provide sufficient detail for anyone to make a diagnosis of the problem.
Regards. -
Why is this update NOT reported by Software Update?
From the Apple downloads site:
Digital Camera RAW Support Update (PPC) [Mac-Intel version also available]
About this update
Mac OS X Tiger provides support for a variety of popular digital camera and image file formats. Applications such as Aperture, iPhoto and Preview utilize this support to work with digital camera RAW files. This update improves RAW file format compatibility for the following digital SLR cameras:
-Canon Digital Rebel XTi / 400D / Kiss X Digital
-Nikon D80
-Pentax *ist DS
Other issues addressed:
-Handling of large Canon RAW files (.CRW)
-DNG compatibility on Intel-based Macs
-Lines sometimes appearing in images exported from Aperture
Dual 1.25MHz MDD G4, 2GB RAM, 4 int dr.,2ext FW drives Mac OS X (10.4.8)You are very welcome Ramon, thanks for posting back. Mext time I'll send it by airmail!
-
Is the GB 9.0.4 update today at App Store needed for all users, or just for Lion? Will it be in Software Update or is it paid update only? Please clarify.
I sure hope you are correct, Christoph. Seems one Mac site has questioned this also:
http://www.tuaw.com/2011/07/11/iphoto-garageband-and-imovie-updated-in-mac-app-s tore/
No iWeb updates either way so far. Not that I use it, just an observation. -
Why won't my system won't suut down after software update?
why won't my system won't suut down after software update?
That's an annoying issue. Disconnect all USB devices such as Pen drives and external HDDs before doing the update.
-
Why is it taking so long for my computer to contact the iphone software updater server
I am trying to update my phone to IOS 8 and its taking a long time for my computer to contact the iphone software update server.
There really aren't many Phonegap users here in the Dreamweaver forum regularly, you may have better luck/faster responses in the Phonegap forum: PhoneGap Build Customer Community
-
I am installing for 1st time apple tv and after software update no reboot
I am installing Apple TV for 1st time and have done a software update. There is no reboot after the update. I do not want to turn off and on to restart the unit. What should I do?
If unpowering it and restarting doesn't help I think you'll need to buy a cable
You could try the 'black display' troubleshooting steps:
http://support.apple.com/kb/HT1551?viewlocale=en_US&locale=en_US
Specifically I wonder if the AppleTV may be trying to connect with an unsupported resolution giving a black screen. Try cycling display resolutions using these remote commands in step 6:
If your TV screen appears fuzzy or black (you see no video)
Make sure the television you are using supports the Apple TV resolution requirements. Please see the Apple TV technical specifications.
When you connect power, check to make sure the LED turns on. If the LED is not on, then verify with a known good power outlet or connect something else to the outlet you're using for Apple TV and make sure it works (such as a lamp or clock).
Make sure you're using the correct video cables and that they are connected firmly to Apple TV and to your TV.
Connect the HDMI cable directly into the Apple TV and your television, remove any third party devices or adapters.
Make sure the input setting you've selected on your TV matches the input you have your video cables connected to. See the documentation that came with your TV for more information.
Change the Apple TV resolution by pressing and holding the Menu and Up button for six seconds. The Apple TV will automatically cycle to the next resolution at approximately 20 second intervals. Pressing the Select button will immediately cycle to the next resolution.
If you are connected via HDMI, try unplugging and replugging your HDMI cable.
If HDMI isn't working on an Apple TV (1st generation), try component cables instead (and disconnect the HDMI cable temporarily). Read more about HDMI vs component video. -
Engineering adds columns for relation
I'm absolutely can't understand logic of the forward engineering process.
Why it adds ADDITIONAL PK columns into my tables with relation?
For example, two tables: CLASS (class_id, name) and TYPE(type_id, name, class_id) with 1-N relation (class.class_id - type.class_id).
After engineering logical model into relational, in a last one I can see new columns:
class.class_id1, type.class_class_id1
How to avoid it? I want to use my own columns for relation!Hi,
you don't have a primary key for entity CLASS in logical model - that's fine. However in relational model you need a PK existing in CLASS table in order to have foreign key from table TYPE to table CLASS.
So new surrogate key column is created - default naming template is {table abbr}_ID and since you don't have table abbreviation it takes table name and creates column CLASS_ID and it becomes CLASS_ID1 because you already have a column CLASS_ID.
For table TYPE - foreign key column is created referring to column CLASS_ID1 - default naming template is {ref table}_{ref column} - this is how the name for the column is set to CLASS_CLASS_ID1.
If you don't want to create primary identifiers in logical model then you should not add PK and FK attributes in related entities - PK/FK columns will be created automatically during engineering to relational model - you need to set related templates.
Otherwise you can create PK identifier and related attributes added to it and FK attributes will be maintained automatically.
Philip -
How to add columns for wad in web apllication designer
hi,
can any one tell me how to add new columns for analysis item in wad.
i found an option of adding new rows but not able to find a option of new columns in analysis item.
please suggest me.
i will assign pointsHi,
There is no functionlaity to add new columns.
For adding new combinations to the transaction data, the input ready new rows are used. Why do you need new columns? -
Hi experts,
I need help urgently. I want to add columns in the matrix of A/R invoice system form.
Can someone give me a solution?
Regards.
OlivierOlivier
You can add user defined fields into Marketing document rows, these will be new columns and will appear U_[COLUMNAME]
Regards
J
Edited by: János Nagy on May 18, 2010 2:01 PM -
New AD OU not showing up in SCCM queries for System OU Name
I'm attempting to create a device collection based on a newly created Workstations OU in AD. When I try select the System OU Name, the Workstation OU is not an option. All the Active Directory discovery methods are enabled. I've also run the full discovery
now. Not sure if it a rights issue or something else.
ADSYSDIS.log
INFO: discovered object with ADsPath = 'LDAP://XXXAD01.XXXXXXXXX.NET/CN=XX-VMTEST-9,OU=Workstations,DC=XXXXXXX,DC=net' SMS_AD_SYSTEM_DISCOVERY_AGENT 4/14/2015 1:40:03 PM 11756 (0x2DEC)
WARN: Failed to get following optional attributes, netbootInitialization,versionNumber,flags,objectVersion,st,title,dLMemDefault,facsimileTelephoneNumber,fSMORoleOwner,gidNumber,maxStorage,physicalLocationObject,profilePath,street,systemFlags,aCSPolicyName,employeeID,forwardingAddress,scriptPath,employeeType,replicationSensitivity,targetAddress,telephoneAssistant,volumeCount,uidNumber,employeeNumber,garbageCollPeriod,ipPhone,mAPIRecipient,personalTitle,userSharedFolder,userWorkstations,heuristics,l,lastLogoff,legacyExchangeDN,manager,netbootMachineFilePath,physicalDeliveryOfficeName,preferredOU,altRecipient,desktopProfile,pOPContentFormat,postalCode,rid,userParameters,deletedItemFlags,displayName,expirationTime,importedFrom,kMServer,mail,primaryTelexNumber,revision,lastLogon,adminCount,autoReply,badPasswordTime,badPwdCount,displayNamePrintable,homeDrive,homePostalAddress,managedBy,submissionContLength,defaultLocalPolicyObject,givenName,homeMDB,homeMTA,mailNickname,policyReplicationFlags,operatingSystemHotfix,division,homePhone,initials,isRecycled,logonCount,promoExpiration,type,operatorCount,userPrincipalName,co,company,enabledProtocols,languageCode,logRolloverInterval,pager,sn,streetAddress,textEncodedORAddress,adminDisplayName,department,generationQualifier,isDeleted,lastKnownParent,pOPCharacterSet,telephoneNumber,adminDescription,autoReplyMessage,c,comment,delivContLength,homeDirectory,info,lockoutTime,preferredLanguage,replicatedObjectVersion,trackingLogPathName,deliverAndRedirect,dnQualifier,dynamicLDAPServer,folderPathname,internetEncoding,language,primaryInternationalISDNNumber,wWWHomePage,assistant,personalPager, SMS_AD_SYSTEM_DISCOVERY_AGENT 4/14/2015
1:40:03 PM 11756 (0x2DEC)
I also check the properties of the device in SCCM and the Workstation OU is populated in the System OU Name field.
The AD System Discovery Properties includes the top level LDAP://DC=XXXXXXX,DC=net, Recursive = Yes, Group = Excluded, Account = Site ServerHave you tried entering the value for the OU manually rather than selecting it from the list in the query? Usually I just copy the canonical name from the Object tab in Active Directory and paste that in there. At least then you can see if the Data is in
SCCM and the objects should show in your query.
Obviously doesn't fix the underlying issue of why it isn't showing in your list but it will show you if there are any systems with that OU set.
There are some filters on the discovery methods which exclude systems which haven't logged on to the domain in the last x amount of days and/or set their password in x amount of days. It may be worth checking the LasLogonTimeStamp of the computer object
to make sure it has a value or I think SCCM will skip it. This is assuming you have that functionality turned on. I would also check this value (although it is replicated) against the DC that SCCM is talking to which is displayed in the log you posted at the
top.
Adam
Maybe you are looking for
-
Not seeing all DB tables in Crystal using ODBC connection
I have an ODBC connection to an oracle database. I can connect to the database and see all the tables through tools such as TOAD, SQL developer, SQLPlus, etc. However, in Crystal, i only see schema tables and not the tables I want. I am using the
-
How to make use of Re Usable Objects
Hi all, I have created an application in Oracle Apex 3.2, and running fine. I want to include ReUsable Objects functionality in my application. Our requirement is, "Common Objects(eg LOVS,Validation,etc) should be written as common objects adn held i
-
RX9800PRO-TD128 and TV-Out cable
Hi, I've bought this card but OEM version and now I'm in trouble because of lack of TV-Out cable. Could someone send me a schema of this cable so I'm able to make one myself ? Best regards Marek
-
What are The Best Accesories?
What are The Best Accesories? like skin cases, chargers, docks, anything thats a conviniet accesories. thanks -billy
-
This document cannot be opened because it is corrupted or damaged.
Hi There I have recently created a pdf document in "Expert PDF 7" from "Avanquest". I have inserted certain fields which needs to be completed by the reader for example name, surname etc. On my desktop, using Windows 7 and Adobe Reader X it works per