Add column to my tag result list

Hi experts,
In our new service desk tool (crm_ui), we want to add a column to a result list, but I haven't a clue how to add it.
What we do is: we tag certain incidents with a term, and then we follow them up by adding the 'tag' widget on our start page.
When we click on a certain tag that we used multiple times, we see a result list.
But we only see two collums in this list: "operation number" and "description".
How to add a third column: "status"?? I cannot find it anywhere in our viewconfiguration. There are no available fields with this label for the ZSOLMANPRO role.
thx

Hello Kenny,
It is quite complex and you might not be able to archieve it by your own. It is not an ABAP-view. The steps wouold be like that:
1. Open you view (screen) in WebUI (CRMUI).
2. Click on an editable field or hyperlink in the view and press F2 until you get a popup.
3. Read which component and view this is.
4. Go to transaction BSP_WD_CMPWB and enter your component from step 3 and select the right view.
5. Check in the configuration (the right one as shown in the popup of step 2) if you can add a field. I thought you already did that but eventually you did not.
6. If the right field is not available you might try to add the attribute to the context node but this is more complex.
Eventually steps 1-5 are already enough. All of this is WebUI configuration and if you looked your your view in SM34 it might indicate that you are not really familiar with it. So be careful.
Best regards,
Thomas Wagner

Similar Messages

Can I customize the standard columns for the search results (list view) specifically?

When searching for emails I would like to adjust the columns in the search results list view, e.g. add the sender's address. This I would like to save as standard columns specifically for the search results list view, since in other contexts I do not need it. However, I can only set standard columns for existing folders, not for the context of "search results".

re :When searching for emails
what method are you using?
Are you talking about 'Quick filter' or 'Global Search' or via 'Edit' > 'Find' > 'Search Messages' ?
'''If you used the Global Search:'''
Typed in a word: eg: Birthday and selected 'Messages mentioning birthday'
Then a search is returned in a new tab.
You click on 'open email as list' - to open in a new tab.
Is this the search results list view that you are refering to?
the default columns should be:
From, Subject, Date, Location
If you only want to see eg: From and Date
click on the icon 'select columns to display' located to far right of header column name.
deselect Subject and Location
next time you run a global search then only those columns appear in the 'open email as list' view.
'''If via 'Edit' > 'Find' > 'Search Messages' ?'''
enter search parameters and click on 'Search'
Is this the search results list view that you are refering to?
the default columns should be:
From, Subject, Date, Location
Subject and Location cannot be edited.
Other column headers can be selected in the same way using the far right 'Select columns to display' icon.
Any column headers you select will not be remembered if you close and later peform another search.
If you click on 'Save as Search folder'
This will create a folder in your Folder Pane and you can select column(s) you wish to display.
Any Column headers you choose to display are selected for that saved search folder.
The column headers only change if you select to reset defaults on that folder or from another folder you select to apply to other folders for either the search folder or all folders in the account.
'''If using Quick Filter:'''
The QuickFilter type of search is done on the folder that is selected.
You are still in the same folder, it has simply ''filtered'' what it is displaying, so it will obviously still display the same column headers.

How to add a Field to the Result List in Activity

Hello Experts !
We are on CRM 7.0. I want to add a field to the Result List of Activity (Component: BT126S_APPT / View: ApptSR). This field is the address of the "Employee Responsible".
So, how can I add a field to the Result List? AET is not a relevant tool for us because we don't want to create an attribute it already exist in the BOL. We just have to enhance the result list with BOL existing attributes.
Also, after I add the field, I will need to populate my field with Data via some method.
Thanks in Advance to all !
Mariano.-
SAP.

Hi Mariano,
The component was missing some technical data. Implement sap notes 1226612, 1363752, and then follow the manual procedure shown below.
u2022     Execute transaction SE11.
u2022     Choose the Radio button "Data Type" and enter value
              "CRMST_QUERY_R_ACT_BTIL" in the Data Type field.
u2022     Click on "Change" button.
u2022     Position the cursor before the Includes added to this structure. Click
             On the "+" button to add a new attribute.
u2022     Enter the following details in the newly added blank row.
     Component: PERSON_RESP_LIST
     Component Type: CRMT_PERSON_RESP_LIST.
u2022     Save the changes and activate the structure.
u2022     Add the "Employee Responsible" field to the View configuration.
u2022     Open the BSP application BT126S_APPT.
u2022     Double-click on the view BT126S_APPT/ApptSR in the left side panel.
u2022     Choose tab "Configuration" in right side panel.
u2022     Choose the right configuration by using the "Choose Configuration" button.
u2022     Click on the Edit button.
u2022     Add the "Employee Responsible" attribute from the "Available fields" list to "Displayed fields" list.
u2022     Save the changes
Regards
Krishna

Personalizing columns in OVS search result list

Hi,
Is it possible to provide an option for personalize the columns by the end user in the OVS search result something like: settings available for ALV's?
regards,
Jatin
Edited by: Jatin Grover on Nov 9, 2011 8:10 AM

Hi Jatin,
As per my understanding you want to provide a button/link on the ALV header which will have customize option for the user to select what all fields he wants to display on the OVS
TO achieve this:
1. Create a button/link on the ALV header.
2. This button/link will call a used component/view which will have alv/split screen to select the desired fields.
3. THis view/component will bind to node having all the posible columns for the OVS.
4. on selecting desired fields the value for the fields in the node set to abap_true (or anything) as desired.
5. In the OVS method get all the fields from the node having value abap_true or as specified and create the OVS catalog accordingly in STEP0/1.
Nawal Kishor Mittal

Add feild in result list

hi experts,
I need to add a field in the result list for component BT111S_OPPT/Search ,in context node 'RESULT' .i have added a couple of EEWb feild for business_transaction object and they are appearing in Search node,but i also need them in the result node.
Please advice how do I go about this.

Hi,
I'm not sure if EEWB can be used to extend search result objects. Find out the structure of the result object. (GENIL_MODEL_BROWSER for BT)Try to see if you can do an append structure in it. Even if you add the fields, I'm not sure if the system will fill the values. In this case, adding the get_i_xxx methods is less troublesome. All you need is to set the return varable "value", which is what you see on the screen.
Regards,
Arun Prakash

Add attributes in Search result list

Hi Experts,
How to add new attributes to a result list. The requirement is to add Product-ID and Z Partner function to the AdvancedSRL view in the component BT116S_SRVO
Regards,
Sarat.

Ok..maybe I was a bit fast..
Your view-BT116S_SRVO/AdvancedSRL has the context node-BTQRSRVORD which is nothing but the result list.Now you need to add one more attribute to this list.
The underlying structure behind this context node-BTQRSRVORD is-CRMST_QUERY_R_SRVO_BTIL .
So you need to add one more field to this structure-CRMST_QUERY_R_SRVO_BTIL .
Then you need to generate the getters for this new attribute and fill the attribute at runtime via Get_V method.
This would be my approach.Lets wait for others to comment.
Regards,
Rohit

How to add a new field to an existing Generic Search result list?

Good day,
I'm new to the concepts of the Generic Search Framework. I'm attempting to add a new field to an existing result list, and have that new field restricted to a value of "C". This new field will not be displayed, it is only used to ensure that Invoice Documents with a DocStatus of "C" are returned to the B2B Application.
From the *modification\generic-searchbackend-config.xml file, the existing
<h4><property-group name="billing_resultlist_B2B_R3">
<property name="BILLINGDOC" columnTitle="sbt.sbs.genericsearch.billing.invoice.title" parameterType="rowkey" hyperlink="b2b/documentstatusdetailprepare.do" linkParamClass="com.sap.isa.ui.uiclass.genericsearch.GenericSearchUIDynamicContent" linkParamMethod="buildAttributesForBillingDocumentDetails" linkTargetFrameName="form_input" />
<property name="BILL_DATE" type="date" columnTitle="status.sales.date" writeUnderProperty="BILLINGDOC" defaultSortSequence="DESCENDING" />
<property name="NET_VALUE" type="number" columnTitle="status.billing.detail.netvalue" fieldOutputHandlerClass="com.sap.isa.ui.uiclass.genericsearch.GenericSearchUIDynamicContent" fieldOutputHandlerMethod="buildBillingNetValue" cssClassName="amount" />
<property name="CURRENCY" type="hidden" />
<property name="PAYER" columnTitle="gs.hd.gl.partner" linkParamClass="com.sap.isa.ui.uiclass.genericsearch.GenericSearchUIDynamicContent" linkParamMethod="buildShowPartnerLinkSales" />
<property name="PAYERS_GUID" type="hidden" />
<property name="SD_DOC_CAT" type="hidden" />
<property name="OBJECTS_ORIGIN" type="hidden" />
</property-group>
</h4>
I'm trying to better understand how the R/3 tables and columns are specified in the Generic Search Framework. I know that the R/3 table and field is: VBRK.RFBSK, but in the configuration XML files, I never see this exact information specified.   How it is specified to be a part of the result set?
After reading the section in the Development and Extension Guide, I also learned about the "allowedValue" definition, and I believe that I will use that to specify the "C" value for the Invoice Document Status field.
I would greatly appreciate any help.
Thanks,
_kevin

Hi Kevin,
this means you are working in this section of the generic-searchbackend-config.xml
             <property-group name="SearchCriteria_B2B_Billing"
                             useSearchRequestMemory="true">
Below this property
                <property name="IRT_BDH_BILL_TYPE"
                          type="box"
                          entityType="BEART_BILL_TYPE"
                          tokenType="EXP"
                          requestParameterName="rc_documenttypes"
                          label="gs.att.lbl.doc.type"
                          UIJScriptOnChange="GSloadNewPageR3(this);">
                    <allowedValue value="ORDER"           description="b2b.status.shuffler.key1val2"/>
                    <allowedValue value="QUOTATION"       description="b2b.status.shuffler.key1val1" />
                    <allowedValue value="INQUIRY"         description="b2b.status.shuffler.key1val11" />
                    <allowedValue value="ORDERTMP"         description="b2b.status.shuffler.key1val3" />
                    <allowedValue value="CONTRACT"        description="b2b.status.shuffler.key1val4" />
                    <allowedValue value="INVOICE"         description="b2b.status.shuffler.key1val5" default="true"/>
                    <allowedValue value="CREDITMEMO"      description="b2b.status.shuffler.key1val6" />
                    <allowedValue value="DOWNPAYMENT"     description="b2b.status.shuffler.key1val7" />
                    <allowedValue value="AUCTION"         description="b2b.status.shuffler.key1val9" />
                </property>
please try adding this new property
                <property name="DOCUMENT_STATUS(1)"
                          entityType="CL_CRM_REPORT_SET_STATUS"
                          tokenType="RAN"
                          type="hidden"
                          requestParameterName="rc_status_head1" value="C" />
This should do the trick. Unfortunately, I don't have a E-Commerce scenario with an ERP backend for testing purposes available to you have to test it yourself. Keep me updated with the test results !
Philipp Koock
SAP CRM Web Channel Consultant
http://www.koock.net

Adding columns to result list in inbox view of web client

Hi,
I have a requirement to display custom columns in result list of inbox view of web client. I copied the view and controller to custom name space. In BSP_WD_WORKBENCH , for AUIITEM view, there are two context nodes . AUIITEMTREE is one of thena and has tree structure and under it tree node proxy. Tree node proxy has attributes, I can not add more attributes to Tree node proxy in work bench. Would you please any one suggest the approach to solve this problem.
Thanks in advance.
With regards,
Ravi Kumar

Hi Ravi,
Have u got solution for ur problem.I have got same requirement.
As per my requirement I need to search for Sold To Party for all category and display it in AUIITEM.
Please provide with some inputs .
Regards,
Vikas

Embedded Search: Additional columns in search result list of cv04n

Dear all
We needed to extended a standard append object to add an additional attribute column "description" in the search result list of cv04n.
Otherwise no user is able to find out best-fit search result really without any indicator about content.
Now my question is if it is possible to add more columns class-independently?
So description is defined for every class type, but what about individual ones for each class?
Best regards
André

Hi,
First check, how the dropdown has been added on toolbar. check if any view set is there in sales order search component.Try by put break point in do_handle_event method of the view and viewset if any.
There might be different configuration in result view to select based on the value selected from dropdown.
Regards,
Dharmakasi.

Add Contact's Email and Phone to the Lead result list on WEB UI

Hello All,
My requirement is to add Contact's Phone number and Email on Lead result list.
Technical details:
BT108S_LEA(Comp)
BT108S_LEA/Result (View)
RESULT (CN)
I have enhanced context node ' Result ' and added new field through wizard (Ex: ContactPhone) using following details.
add model attribute:
BOL entity: BuilContactPerson
BOL Attribute: TEL1_NUMBR
After the successful creation, i added ContactPhone field from available fields to display fields.now i could able to see the newly added field on Lead result list.i see message 'BTPARTNER not bound' under telephone colomn for each record.
Can we add these two fields from standard BOL structure and use it , so that no coding required, system will take care of data retrieval?
or should i go with adding custom fields and write logic to get the data for each lead's contact?
please help me with approach and on above error.
Thanks
Gangareddy

Hi Ganga,
Since these fields are in a table view, its not possible to bind them with the standard BuilHeader BOL Object. Hence, we need to write the custom logic for these methods.
You have two options here.
Option 1:
Add the fields in the result structure and modify the Genil Search class logic and replace the standard GENIL class with custom class.
Option 2:
Create the custom attribute directly in the BOL structure and write the custom logic in getter method.
Hope this helps.
Thanks
Vishal

Add Custom fields in Result List

Hello ,
We are using CRM2007, where we have asked to update the Service Order Search Result list to accumudate the IBASE no, IBASE component & Product.
So, I have enhanced the component:BT116S_SRVO/AdvancedSRL , BASE Entity of which is "BTQRSrvOrd ".
I have append one structure with the required fields into the stucture "CRMST_QUERY_R_SRVO_BTIL " of the base entity.
For example -
Field1 -->ZZFIELD1 type IB_IBASE
Field2-->ZZFIELD2 type IB_INSTANCE.
In order to configure the component to show in the Result list , entry into CRMC_REPDY for the fields is not completed as
Selection Field-->ZZFIELD1
Fld Name in Database-->Append Structure~field name
Dynamic Access Name --->DYN_?
Please suggest how to define the above field values & after that populate the contents for these fields.
Please Help.
Thanks & Regards
Deb

Hello Deb,
The search criteria needs the procedure you fallowed ,But not the result list.
In the Context node you can directly add the attributes you required from the BOL.
1.Enhance the component and View.
2.In the context Node BTQRSRVORD on attributes Rignt Click and say create
3 Give the name of the fields.
4.Say add Model Attribute
5.BOL entity Come byitself BTQRSrvOrd
6.In the BOL Attribute go to f4 help and Scroll down and expand relations
7.find the Ibase relations and add the fields.
No Coding is required ..All the methods get generated and results get populated .
The only thing is you have get the proper fields and realations.
Sree.
Edited by: Sree on May 20, 2010 6:26 PM

How to Add Industry Code in web Ui search result List

Hello Friends,
I need some help from you...
We have a Requirement like In Business Partner (BP) we have Identification tab in that we have again Industries. My client requirement is they need Industry codes In WEB UI Search Result list. Could you please tell me how can i add this in Search result list.
Please find the below Mentioned Screen shorts.
Regards
Mohammad

Hello Mohammed,
That is totally easy. You just have to add a new attribute in the BOL-object for the result list.
- Either a value attribute
- Or better a model attribute of the BOL-object where industry code is in
You also need to think about what to show if a business partner has several industry codes like in your case. I normally only show 1:1-attributes in the result-list.
Best regards,
Thomas Wagner

How to add column to ME92/ME92F list

I would like to add 'delivery date' as a column in the ME92/ME92F list, but I have not been able to find the list or how to maintain it.

That makes sense, thank you.
By the way I went to the list and used F1 and technical details to get the program name for the ABAPer.

Table source, mapped column, result list

Hi!
I need to show in result list some field from my table (orderNo).
Each row in table is an order item, with content column (orderInfo) which I intrested to indexing.
But when I map orderNo column (I forced to map because without it I can't operate with orderNo in XSLT search result) to search attribute in table column mapping this column became searchable and this is bad for me because of search colision...
So my question is - howto show column in result list, but avoid this column to be searchable ?
Thanks!

This is the default behavior. All columns indexed, including the CONTENT column, are included in a FT search. The CONTENT column becomes the cache link.
If you are using a custom UI, you could build your custom search using Filters and custom search attributes. Since you are using the out-of-the-box search, the only thing I can think of is to use the Attribute Selection, select ONLY the attribute(s) you want to search, and then execute your search.
If you do not want to force the user to use a look-up, you can use the FT short cut search attribute syntax of "SEARCH_ATTRIBUTE_NAME:VALUE"... so if your attribute name/column name is "orderNo" your search syntax would be "orderNo:12345" where 12345 is the order number you are looking for. This will save users from having to open the dialog.
FYI - You might be able to default "orderNo:" in the search box by tweaking the URL.
Hope this helps.

Enhancement Request: History List -- Add Columns Catagory1, Catagory2, Bugz

Please consider this enhancement request:
To History List:
Please add columns:
Catagory1 text
Catagory2 text
BugNumber numeric ( as in Bugzilla bug number )
Thanks.

Possibly add a:
Note text
column as well?

Add column to my tag result list

Similar Messages

Maybe you are looking for