Table source, mapped column, result list

Hi!
I need to show in result list some field from my table (orderNo).
Each row in table is an order item, with content column (orderInfo) which I intrested to indexing.
But when I map orderNo column (I forced to map because without it I can't operate with orderNo in XSLT search result) to search attribute in table column mapping this column became searchable and this is bad for me because of search colision...
So my question is - howto show column in result list, but avoid this column to be searchable ?
Thanks!

This is the default behavior. All columns indexed, including the CONTENT column, are included in a FT search. The CONTENT column becomes the cache link.
If you are using a custom UI, you could build your custom search using Filters and custom search attributes. Since you are using the out-of-the-box search, the only thing I can think of is to use the Attribute Selection, select ONLY the attribute(s) you want to search, and then execute your search.
If you do not want to force the user to use a look-up, you can use the FT short cut search attribute syntax of "SEARCH_ATTRIBUTE_NAME:VALUE"... so if your attribute name/column name is "orderNo" your search syntax would be "orderNo:12345" where 12345 is the order number you are looking for. This will save users from having to open the dialog.
FYI - You might be able to default "orderNo:" in the search box by tweaking the URL.
Hope this helps.

Similar Messages

How create report with data from table and some columns results function ?

Hi,
How can i create on apex report region with some columns (of the report) as returned from a table and the other columns as results of plsql functions ?
for example , I want to create a report like that:
device last_date error_msg stop/start
kodak1 06/04/08 null >>
kodak2 08/03/08 good msg --^--
kodak3 08/04/08 err msg >>
3 rows returned
where the 3 first columns are data returned from the table and the forth column is the result of plsql function (returned for example false) and on that i want to display a button of start ( >> in this example ) or stop ( --^-- in this example)

Thomas,
There is no problem here -- this is fully suported scenario.
1. Bind Table dataSource to Customers node.
2. Bind individual cell editors to any attribute of customer or any nested node like Address, say create column with InputField as editor, then for "value" property select Customer.Address.Street.
Your nested nodes (like Address) must be non-singleton, set singleton=false on context designer tab.
Valery Silaev
EPAM Systems
http://www.NetWeaverTeam.com

How to get all the column values from a table source

Hi,
I have created one table source on a employee table and some customized attributes using global settings>search attributes.
Now these customized attributes mapped with the table columns through attribute mapping from the sorce tab.
Using doOracleSearch method i passed last parameter i.e. Integer array of customized attributes.
After execution of doOracleSearch method i am getting the results but customized attributes are not coming.
getCustomAttributes method returns null instead of some values.
Please refer following code for more info:
Integer[] fetchAttr=new Integer[2];
fetchAttr[0]=new Integer(137);
fetchAttr[1]=new Integer(138);
result =
stub.doOracleSearch("BTM",
new Integer(1),
new Integer(10),
Boolean.TRUE,
Boolean.TRUE,
group,
"en",
"en",
Boolean.TRUE,
null,
null,
fetchAttr);
ResultElement[] resElements = result.getResultElements();
for(int i = 0; i < resElements.length; i++)
System.out.println("Title : " + resElements[0].getTitle());
System.out.println("Snippet : " + resElements[0].getSnippet());
System.out.println("URL : " + resElements[0].getUrl());
System.out.println("non default : " + resElements[0].getCustomAttributes()); // it returns null here
}

Confirm the attributes you are asking SES for match those on the data source being searched. One thing to try is to simply tell SES to return all custom attributes for your search. Here is a snippet to build a list of all attribute IDs and pass them to your search...
// Create and set SOAP URL
OracleSearchService searchService = new OracleSearchService();
searchService.setSoapURL("http://myserver:7777/search/query/OracleSearch");
// Set attributes to fetch (all)
Attribute[] attributesAll = searchService.getAllAttributes("en");
ArrayList<Integer> attributeIds = new ArrayList<Integer>();
for(Attribute a: attributesAll)
attributeIds.add(a.getId());
Integer attributeIdArrayAll[] = new Integer[attributeIds.size()];
attributeIdArrayAll = attributeIds.toArray(attributeIdArrayAll);
// Query
OracleSearchResult result = searchService.doOracleSearch("some text", ..........[other params], attributeIdArrayAll);
// Print out results
ResultElement[] resElements = result.getResultElements();
for(int i = 0; i < resElements.length; i++)
// Get document
ResultElement doc = resElements;
// Print Title
System.out.println("Title: " + doc.getTitle());
// Print custom attributes
CustomAttribute[] attributes = doc.getCustomAttributes();
for(int j = 0; j < attributes.length; j++)
CustomAttribute attr = attributes[j];
System.out.println("[Custom Attribute] " + attr.getName() + ": " + attr.getValue());
Hope this helps.

Result table data to be populated based on selection in the result list

Hi,
We have a parent data source "P" containing all the record types. Further we have two child data sources each having filters on exclusive record types(for ex. child1 containing record types X, Y, Z and child2 containing record types A, B).
In our page we have a result list associated with data source child1(record types X, Y, Z) and result table associated with data source child2(record types A, B). There exists common attributes among the attributes present in result list and in the result table.
Rest of the containers in the page namely search, breadcrumbs, guided navigation point to the parent data source("P") containing all the record types.
Whenever we select a value from the guided navigation using the common attributes both the result list and result table are getting filtered.
What we require is that, whenever an attribute(common attribute) is clicked in the result list, the data in the result table needs to get filtered based on the value of the attribute that is clicked.
Is this possible? If so, pl. suggest how.

Take a look at the Studio release notes for EID 2.4 http://docs.oracle.com/cd/E35976_01/studio.240/RELNOTES.txt a lot of little bugs like the one you describe have been resolved. If you haven't already done so you should upgrade to 2.4.

OBIEE: Incorrectly defined logical table source doesn't contain mapping

In OBIEE 10.1.3.2 I have a very simple thing but cannot get it to work. Hopefully someone can point out the mistake. I have the same schema on two different database that I want to compare data.
The schema is simple. Table (dimension) A has two columns: id and name. Table (Fact) B has two columns: id and value. Table B.id is a foreign key to A. I imported two database schema into the physical layer and for each database, I built the foreign key relationship between table A and B. In the logical layer, I have two logic tables, one to represent A (Dimension) and the other B (Fact) with a logical join. Each logical table has two data sources. For the dimension tables, both id and name columns have two sources. For the fact table, the id has two sources and for the value, I created two separate columns, one called value1 and the other value2 with one from one database's B table's value column and the other from another database's B table's value. They then were made available at presentation layer.
Now in the Anwser, I can build a query with id from dimension and value1 from fact; it displayed fine. Same with a query with id from dimension and value2 from fact, it displayed fine. However, if the query is id, value1 and value2, I got the following error
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 15018] Incorrectly defined logical table source (for fact table B) does not contain mapping for [B.value1 [ ] , B.value2 [ ] ]. (HY000)
Is there something I have to do additional to make both values appearing the same time.?
Thanks for your help
Ralph

Hi, Siddhartha P
I don't think I understand your information. I couldn't find connection pool at the business mapping layer. I only see it in the physical layer. Do you mean to do the mapping at the logical source table? That's only places I see any mappings and I don't see complex join there (only inner join, left outer, right outer and full outer) What mappings should I need to create between table B (fact table) of database 1 and table B (fact table) of database 2. I thought they don't have any relationship other than join through a dimension table which has columns that map to both table A (dimension table) of database 1 and 2. Then the logical fact table has 3 columns, one is id (to join to Dimension table) with two mappings (one to table B of database 1 and one to table B of database 2) and one column value1 which maps only to table B's value of database 1 and another column value2 maps to table B's value of database 2. That seems to be done correctly because I can pick column id and value1 or column id and value2 and have them displayed correctly but not all 3. I thought if it can display the two separately correctly, they should be able to display all 3. no?
I am not getting any inconsistency error.
There must be something I still don't understand. If you don't mind give me a little more direction, that would be great.
Thanks
Ralph

Add column to my tag result list

Hi experts,
In our new service desk tool (crm_ui), we want to add a column to a result list, but I haven't a clue how to add it.
What we do is: we tag certain incidents with a term, and then we follow them up by adding the 'tag' widget on our start page.
When we click on a certain tag that we used multiple times, we see a result list.
But we only see two collums in this list: "operation number" and "description".
How to add a third column: "status"?? I cannot find it anywhere in our viewconfiguration. There are no available fields with this label for the ZSOLMANPRO role.
thx

Hello Kenny,
It is quite complex and you might not be able to archieve it by your own. It is not an ABAP-view. The steps wouold be like that:
1. Open you view (screen) in WebUI (CRMUI).
2. Click on an editable field or hyperlink in the view and press F2 until you get a popup.
3. Read which component and view this is.
4. Go to transaction BSP_WD_CMPWB and enter your component from step 3 and select the right view.
5. Check in the configuration (the right one as shown in the popup of step 2) if you can add a field. I thought you already did that but eventually you did not.
6. If the right field is not available you might try to add the attribute to the context node but this is more complex.
Eventually steps 1-5 are already enough. All of this is WebUI configuration and if you looked your your view in SM34 it might indicate that you are not really familiar with it. So be careful.
Best regards,
Thomas Wagner

Adding columns to result list in inbox view of web client

Hi,
I have a requirement to display custom columns in result list of inbox view of web client. I copied the view and controller to custom name space. In BSP_WD_WORKBENCH , for AUIITEM view, there are two context nodes . AUIITEMTREE is one of thena and has tree structure and under it tree node proxy. Tree node proxy has attributes, I can not add more attributes to Tree node proxy in work bench. Would you please any one suggest the approach to solve this problem.
Thanks in advance.
With regards,
Ravi Kumar

Hi Ravi,
Have u got solution for ur problem.I have got same requirement.
As per my requirement I need to search for Sold To Party for all category and display it in AUIITEM.
Please provide with some inputs .
Regards,
Vikas

Mapping column names stored in a table to one data table dynamically

Hi everyone,
Can someone help me - I am trying to import different file types (CSV, TXT, XLS) into a common table.
The column mapping for the input files is mapped in a look up table - so file 1.txt can have columns order as 12345 while file 2.csv can have columns order 54321.
How would I dynamically set up the correct mapping depending on which file I am busy with in my foreach loop. (an example would be much appreciated - I am relatively new to SSIS and have a deadline coming up)
Thanks,

Pretty sure not possible with available transformations...
You can try script tasks/component and standardize the input file one by one by using a bunch of loops/if-else codes and collect your data into one table.
Otherwise, you would need to create different connections/DF for each types of files.

Dragging the columns to existing logical table source.....

Hi,
I am just learning OBIEE 11g and I am using a turorial from oracle it is
"Creating a Repository Using the Oracle BI 11g Administration Tool" for practice purpose.
In this tutorial it is saying that drag that columns from phscial layer to Logica Table Source
in BMM Layer to avoid creating a second logical table source.. But when I am trying to drag the columns to
existing logical source it is disabling I mean which it is not allowing .. is there any other technique to
do it... or Am i wrongly approaching.. .The below is brief description in the
tutorial.
"Drag all six columns from D50 Sales Rep in the Physical layer to D5 Sales Rep in the BMM layer. This action
creates logical columns and adds a D50 Sales Rep logical table source to D5 Sales Rep.
Rename the D50 Sales Rep logical table source to LTS1 Sales Rep.
In the Physical layer, expand D52 Sales Rep Position.
Drag POSTN_DESC and POSTN_LEVEL from D52 Sales Rep Position to LTS1 Sales Rep. Note that you are
dragging the columns to the logical table source, not the logical table. Dragging to the logical table would create a
second logical table source.
Drag DISTANCE from D51 Sales Rep Parent Child to LTS1 Sales Rep. Again, you drag the column to the logical
table source, not the logical table."
help would be appreciated.
Thanks and Regards,
Sri_Oracle.

Hi Sri,
When you are dragging a physical column onto an existing Logical table source and if it does not let you do so, then it means that there is no physical join between the existing physical table(which the logical source is pointing to already) and new physical table (from which you are dragging the column now). So, please make sure, you have the join in place.
Hope this helps.
Thank you,
Dhar

Repos - logical table source does not contain mapping

Hi,
I have a repository question?
I do not have a fact table in my physical layer. Do I have to have one? I thought the fact table got created in the BM.
I do have a date table in the physical layer, but it isn't joined to any other table.
I added the PK from the date_dimention to my logical fact table.
when I open the properities of my logical date table it is mapped to the physical date table.
Now in answers, I can query the date_dimension without error.
But, when I query the fact table using the date key, I get this error.
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 15018] Incorrectly defined logical table source (for fact table CRTK_FACTS) does not contain mapping for [CRTK_FACTS.MASTER_AI_ID, CRTK_FACTS.INT_DOC_ID, CRTK_FACTS.DATE_KEY]. (HY000)
SQL Issued: SELECT CRTK_FACTS.MASTER_AI_ID saw_0, CRTK_FACTS.INT_DOC_ID saw_1, CRTK_FACTS.DATE_KEY saw_2 FROM CRTK ORDER BY saw_0, saw_1, saw_2
Anyone have any suggestions on what I am missing?
thanks,
Kathy

I don't have a fact table in the physical layer. Do you mean join between the date table and other dimension tables?
or do I have to build the fact table in the physical layer?
I have not built any hierarchies yet, working on it.

Embedded Search: Additional columns in search result list of cv04n

Dear all
We needed to extended a standard append object to add an additional attribute column "description" in the search result list of cv04n.
Otherwise no user is able to find out best-fit search result really without any indicator about content.
Now my question is if it is possible to add more columns class-independently?
So description is defined for every class type, but what about individual ones for each class?
Best regards
André

Hi,
First check, how the dropdown has been added on toolbar. check if any view set is there in sales order search component.Try by put break point in do_handle_event method of the view and viewset if any.
There might be different configuration in result view to select based on the value selected from dropdown.
Regards,
Dharmakasi.

Can I customize the standard columns for the search results (list view) specifically?

When searching for emails I would like to adjust the columns in the search results list view, e.g. add the sender's address. This I would like to save as standard columns specifically for the search results list view, since in other contexts I do not need it. However, I can only set standard columns for existing folders, not for the context of "search results".

re :When searching for emails
what method are you using?
Are you talking about 'Quick filter' or 'Global Search' or via 'Edit' > 'Find' > 'Search Messages' ?
'''If you used the Global Search:'''
Typed in a word: eg: Birthday and selected 'Messages mentioning birthday'
Then a search is returned in a new tab.
You click on 'open email as list' - to open in a new tab.
Is this the search results list view that you are refering to?
the default columns should be:
From, Subject, Date, Location
If you only want to see eg: From and Date
click on the icon 'select columns to display' located to far right of header column name.
deselect Subject and Location
next time you run a global search then only those columns appear in the 'open email as list' view.
'''If via 'Edit' > 'Find' > 'Search Messages' ?'''
enter search parameters and click on 'Search'
Is this the search results list view that you are refering to?
the default columns should be:
From, Subject, Date, Location
Subject and Location cannot be edited.
Other column headers can be selected in the same way using the far right 'Select columns to display' icon.
Any column headers you select will not be remembered if you close and later peform another search.
If you click on 'Save as Search folder'
This will create a folder in your Folder Pane and you can select column(s) you wish to display.
Any Column headers you choose to display are selected for that saved search folder.
The column headers only change if you select to reset defaults on that folder or from another folder you select to apply to other folders for either the search folder or all folders in the account.
'''If using Quick Filter:'''
The QuickFilter type of search is done on the folder that is selected.
You are still in the same folder, it has simply ''filtered'' what it is displaying, so it will obviously still display the same column headers.

Listing tables where particular column exists

I want to list the tables where particular column is refered how do i do this thru sql plus?
Thanks in advance
Sudha

Do you mean this?
select table_name from user_tab_columns where column_name like 'N%ID';Lennert

Loading source tables without common columns using owb

Dear All,
I have 5 tables say a,b,c,d,e who has no columns between any of these tables .but i need to poulate some of the columns in each table as per my requirement and
i need to load into my target table which needs the above tables source columns data .
how can we achieve this as we dont have any columns across 5 tables.
regards
rajesh

Same thread .
Loading source tables data without common columns in owb
Please close it.
Edited by: Nawneet on May 18, 2009 11:06 AM

Source table to data source mapping

Hi Guys,
I have table and field name in R/3 source system. Now I want to find out the names of the data sources that are having this field.
Is there way to look for it.
Example you know table rc29l and element datuv, now I want to know the name of datasources which has this field. Is there a way apart from checking it in help.sap.com infosources or checking it in indivual datasources of that ACH

Hi,
Thanks for response.
But I want to know this table has mapping for all business content or only activated business content.
Thanks

Table source, mapped column, result list

Similar Messages

Maybe you are looking for