Adding columns to result list in inbox view of web client

Hi,
I have a requirement to display custom columns in result list of inbox view of web client. I copied the view and controller to custom name space. In BSP_WD_WORKBENCH , for AUIITEM view, there are two context nodes . AUIITEMTREE is one of thena and has tree structure and under it tree node proxy. Tree node proxy has attributes, I can not add more attributes to Tree node proxy in work bench. Would you please any one suggest the approach to solve this problem.
Thanks in advance.
With regards,
Ravi Kumar

Hi Ravi,
Have u got solution for ur problem.I have got same requirement.
As per my requirement I need to search for Sold To Party for all category and display it in AUIITEM.
Please provide with some inputs .
Regards,
Vikas

Similar Messages

Custom fields to be added to the result list through AET

Hi All,
I have to add the custom fields to the Result list of the Ibase. I came to know that this can be achieved through the AET(application enhancement tool). I have done the following steps
1. I enabled the AET through personalization settings and i clicked on the show configurable area icon.
2.I have chosen the reult view for which custom field (Zfield) has to be added.
3.One pop-up came, but the 'Create New Field' Button is in disable mode.
Because of this i am not able to add the customi fields to the result list. Please provide me the solution to overcome this issue.
Regards,
Lakshman.P

Hi,
it is not recommended to create custom field manually. Adding a new field in a BOL structure is not enough. Because you need also the field in the database and maybe also in other structures, i.e. Middleware.
As far as I know AET is able to enhance IBASE application. In the Config Tool, AET tries to determine which enhanced business object is relevant for the current application(in your case IBASE application). When AET is able to determine an enhanced business object, it will activate the "Create New Field".
The determination of enhanced business object is based on the UI object type that is set in IBASE application.
You need to make sure 2 points here.
1. IBASE application has to set UI object type. Use tab to get the focus in any button of the view that you want to enhance, than press F2. You will get a popup and it shows a field "Object Type(Searched For)". That is the UI object type which is set by the application.
2. Go to SE11 and open the UI object type table (BSP_DLC_OBJ_TYPE). Search for this object type which is set by the IBASE application and see whether the given result has also an EXT_BO. EXT_BO in this case is the enhanced business object which is used by AET.
If you do not come any further, please create a CSN message.
Regards,
Steve

Stock Requirement List - MD04 - adding columns in this list

Dear All,
I am working on the Stock Requirement list ( transactioncode MD04) and the customer wants to add columns with the fields STPO-DATUV ,date of change of a drawing, and the drawing number with revision level STPO-YY_DZEINR.
There is a badi MD_ADD_COL_EZPS which provides in adding columns, but according the structures MDPSX , MDEZX and MDSUX there are no fields in thoser structures, which directly match with the required fields; somebody has a clue to help me out and get it working.
For instance: Vendor- and Customer data can be added by using the pushbuttons and those fields are available from above mentioned structures.
Thanks in advance and kindest regards,
Rene.

Hi Utpal Mishra
You guessed correctly. I missed to inform our Strategy. We are using Strategy group 11 Make-to-stock prod./gross reqmts plnning.
User is not able to do PGI or create delivery. He says I have enough stock in MMBE but why system is not allowing.
Here there are some pending document like -
1. Pending sales order
2. Pending deliveries (picking not done)
2. Delivery created & Picking Done but PGI not done. These things will have a commitment against the stock. But we are interested in getting these document numbers, so that we can take come action against them.
MD04 simply shows the mrp element as order / delivery but the document number is not available. How to find these documents.
Please help. Is there any table or a standard transaction ??
Thanks

Need to Hide Few Columns In BPM worklist/workspace Inbox View

Hi Team,
We want to customize the default inbox view, we need to remove some exiting columns(priority,state, task number and expired) and need add some custom columns.
We have followed the Customizing Applications in Process Workspace and the Worklist Application - 11g Release 1 (11.1.1.6.3) but did not work.
Please help on this.
Thank you,
Keshav

Keshav,
You can acheive this its pretty easy...
Step1: Login to Workspace/Worklist as Administrator
Step2: Navigate to Admin Page by clicking on Administration link from the Global Links
Step3: Click on Public Flex fields/ Protected Flex fields under the Flex Feilds.
Step 4: Once on the Public Flex Fields screen click on the green + icon to create a new label .
Step 5: Now it will be to map this labelwith the simple variable coming as part of the input to the task form.
Step 6: We can now create a custom view so that we can also see the column for the Limit Requested column in the inbox. For the same view we will also sort the tasks based on the limit amount so that the users can prioritize it. Go to the Worklist Views heading and click on the green Add icon to create a custom Inbox/View.
Refer this: Using Flex Fields in Oracle BPM 11g | Oracle Technologies Premier.
Hope it helps you!!!
Cheers!!!
Regards,
Pavan

Export to spreadsheet from program result list (ALV Grid) via the web

Hello alles!
When executing a program (a report) using SAP WebGUI or the portal (Manager's Desktop/Launchpad etc.), exporting the result list to a spreadsheet doesn't seem to work. No error message, browser doesn't really hang, but nothing happens. Neither Excel, nor XML export, nor anything works.
Export from the same program works just fine in SAP GUI.
(SAP Note 314568 has some information about ALV Grid export limitations, but I can't make the XML export work either...)
Could this be a configuration error in ITS? In that case, where..?
Or is it something we just need to live with?
Thank you in advance!
Brgds, Caroline

There is a known problem regarding exportation to Excel.
Try the following path :
Tools --> Macro --> Security
Then go to the "Trusted Publishers" tab and tick the "Trust acess to Visual Basic Project" option.
This should do the trick.

Adding new search fields in identifying accont in CIC Web client

Hi All,
How do I do to add a new field (not in BOL) to search for in the identiyng account in CRM 4.0 Interaction Center Web client.
We have extended the BOL with the new field and add it to the BSP for BupaSearchB2B, But what and where do I add functionality to also actually use the field content when searching for business partners.

Hi jan
I am facing the same problem we are adding one field to identify account in CRM 4.0 IC WEBCLIENT , field name is CIF NUMBER (bu_sort1 or bpext) , I identified that it is not an standard BOL field , can you please update me how you added the new field to bol structure and what is the follow up process to provide complete functionality like the existing fields , Please extend your help regarding this field addition , it is very urgent
this is my mail id [email protected]
Warm regards
bms

Adding column to incident list report for indident details (original isue and resolver comments)

Hi,
we have SCSM 2010 with default reports. One very common quarterly requirement is that list of incidents for an analyst which is shown does not have any details of the incident.
i would like to get a column to display the following 2 data fields :
the original incident description and analyst comments on how the incident was resolved.
can anyone help out in this regards ?
Regards
Zaid

Hi Andreas,
Thanks, yes i can see a lot of other table details too that mught come handy later :). ok so the report that i run from the console Incident > List of incident > basically pulls data from this table ?
Instead of changing the original report, i would like to copy the original report and do the changes to that one.
how do i do that ? this is my first actual SQL / reporting interaction. so i may need some assistance. :)
here is what i ahev done so far :
1) i have browsed to the SQL SRS web url and i can see the systemcenter>servicemanager>Sm.console.reporting.incidentmanagement folder
inside there i can see the report i want to copy i.e listofincident report and the rpdl files.
2) i created a new folder "custom reports" in systemcenter>servicemanager>custom_reports
3) how do i get the list of incidents reports in this folder ?
4) how do i modify the report to include the ResolutionDescription and Description column
thanks for the help.
regards
zaid.

Custom Address List - Email Header in IC Web Client

Hello,
I wanted to check if there is a possibility to provide users
with a custom address list wherein we can have our own set of email addresses
to choose from for sending the email through SAP CRM.
Currently I am aware that three types of address lists
mentioned below are possible.
CRM Addresses ( BP Address)
MS Outlook
Lotus Notes
The requirement came up, as my customer’s call center
employees do not have official email ids & hence outlook or lotus notes
integration is not possible. Every time
if they want to send an email to any internal employee through SAP CRM, they
have to manually enter email ids which they find it bit uncomfortable.
Any guidance will be appreciated.
Regards, Mathy

Hi Ragav,
Creating a DL will not suffice the requirement here. Recipient IDs are not always the same.
Regards, Mathy

Table source, mapped column, result list

Hi!
I need to show in result list some field from my table (orderNo).
Each row in table is an order item, with content column (orderInfo) which I intrested to indexing.
But when I map orderNo column (I forced to map because without it I can't operate with orderNo in XSLT search result) to search attribute in table column mapping this column became searchable and this is bad for me because of search colision...
So my question is - howto show column in result list, but avoid this column to be searchable ?
Thanks!

This is the default behavior. All columns indexed, including the CONTENT column, are included in a FT search. The CONTENT column becomes the cache link.
If you are using a custom UI, you could build your custom search using Filters and custom search attributes. Since you are using the out-of-the-box search, the only thing I can think of is to use the Attribute Selection, select ONLY the attribute(s) you want to search, and then execute your search.
If you do not want to force the user to use a look-up, you can use the FT short cut search attribute syntax of "SEARCH_ATTRIBUTE_NAME:VALUE"... so if your attribute name/column name is "orderNo" your search syntax would be "orderNo:12345" where 12345 is the order number you are looking for. This will save users from having to open the dialog.
FYI - You might be able to default "orderNo:" in the search box by tweaking the URL.
Hope this helps.

String limit does not appear in result list

Hello
I have a sequence file with a sequence call "String limit test". After running the sequence from a process model, the "Limits" container does not appear in the result list of the main sequence. I have checkec the IncludeInReport flag for the Limits container, still I don't see it.
Basically I need this information after calling the MainSequence in the client file, in order to create a report file. How to inclide the variable in the ResultList[]?
Madottati

Madottati,
All the data from Step.Result will be copied to Locals.ResultList. Limits container for the step is outside Result container and hence is not copied to the ResultList. IncludeInReport flag affects only properties that are in a result list or that TestStand copies to a result list.
http://www.ni.com/white-paper/8289/en/ contains more details about what properties gets added to the Result List.
You can use Additional Results feature toa add Limits container to the ResultList.
- Shashidhar

Expende the Line in the result list

Hello
I need your help.
In the result list at "Identify account" i get only 4 lines. and if i have 10 result i need to turn pages.
I want to get more then 4 lines in the result list in one view without turn pages.
Thanks
Merav

Hi Lisa
You can change the visibleRowCount = "4" to "10".
crmic:tableView id              = "<%= controller->tableview_id %>"
                     navigationMode = "BYPAGE"
                     onRowSelection = "select"
                     onNavigate      = "onNavigate"
                     table           = "//Customers/Table"
                     selectionMode   = "LINEEDIT"
                     columnWrapping = "FALSE"
                     fillUpEmptyRows = "FALSE"
                     keyColumn       = "BP_NUMBER"
                     emptyTableText = "Table is empty!"
                     visibleFirstRow = "<%= First_Row %>"
                     focus           = "TRUE"
                     visibleRowCount = "4"   <----
Here!!!!!!!!!
                     selectedRowIndex = "<%= Row_Selection %>"
                     headerText      = "<%=lv_size %> <%=otr(crm_ic_appl/BupaResultsCustomer) %>"
                     headerVisible   = "TRUE"
                     width           = "100%" >
      <crmic:tableViewCols>

How to get the inbox items in IC WEB CLIENT

hi,
Is there any function module to get the emails present in inbox in IC WEB CLIENT.
Message was edited by:
neelima m

IC WebClient processes Email using SAPConnect component .There are certain configurations need to take place on groupware integration like SMTP configuration and Inbox settings on IC WebClient .
Please follow the instructions given in the document which is available on SAP Note 82653
Thanks,
Thirumala.

Adding Customer Phone in Inbox result list

Hello All,
We would like to add customer phone number in Inbox result list so that agent can call customer directly from Inbox. The customer column is available in UI configuration. I was doing enhancement using enhancement set method and created an enhcement in SM34 for view cluster BSPWDVC_CMP_EXT also in Component workbench I used this enahcement set for compoenent ICCMP_INBOX and enhance the view InboxItems.
Should I create a Contet Node for new field Phone, and use design layer to add that field in this view? When I was creating a new Context Node for context CL_ICCMP_IN_INBOXITEMS_CTXT it is adding the attribute not with other attributes such as CREATEDON, CUSTOMER etc.
Can someone send the steps to add a column in the Result list in a table in ICWC.
Thank you in advance.

Hi,
Create ZCL_ICCMP_IN_INBOXITEMS_CN01 that inherits from CL_ICCMP_IN_INBOXITEMS_CN01
Redefine ZL_ICCMP_IN_INBOXITEMS_CTXT- CREATE_ITEMS to create the model based on the above class
Create ZCL_ICCMP_IN_INBOXITEMS_CN02 that inherits from CL_ICCMP_IN_INBOXITEMS_CN02
Re-define ZCL_ICCMP_IN_INBOXITEMS_CN01- REFRESH to use the above Z Class
Create method ZCL_ICCMP_IN_INBOXITEMS_CN02-GET_<your field>
Create ZCL_ICCMP_IN_INBOXITEMS_CN03 that inherits from CL_ICCMP_IN_INBOXITEMS_CN03 in order to show your field for the children as well.
Implement the method ZCL_ICCMP_IN_INBOXITEMS_CN03-GET_<your field> lile for the class ZCL_ICCMP_IN_INBOXITEMS_CN02
Redefine ZCL_ICCMP_IN_INBOXITEMS_CN02- IF_BSP_WD_TREE_NODE~GET_CHILDREN to use the above class
Add your field in ZCL_ICCMP_IN_INBOXITEMS_CN01-GET_TABLE_LINE_SAMPLE
METHOD get_table_line_sample .
TYPES: BEGIN OF line,
INCLUDE TYPE crmst_inbox_resultlist.
u2026u2026u2026u2026u2026u2026
<your field> TYPE string,
END OF line.
CREATE DATA rv_sample TYPE line.
ENDMETHOD.
This way the field will be available in the configuration tool
It worked for me, I hope I did not miss any step.
Regards

Can I customize the standard columns for the search results (list view) specifically?

When searching for emails I would like to adjust the columns in the search results list view, e.g. add the sender's address. This I would like to save as standard columns specifically for the search results list view, since in other contexts I do not need it. However, I can only set standard columns for existing folders, not for the context of "search results".

re :When searching for emails
what method are you using?
Are you talking about 'Quick filter' or 'Global Search' or via 'Edit' > 'Find' > 'Search Messages' ?
'''If you used the Global Search:'''
Typed in a word: eg: Birthday and selected 'Messages mentioning birthday'
Then a search is returned in a new tab.
You click on 'open email as list' - to open in a new tab.
Is this the search results list view that you are refering to?
the default columns should be:
From, Subject, Date, Location
If you only want to see eg: From and Date
click on the icon 'select columns to display' located to far right of header column name.
deselect Subject and Location
next time you run a global search then only those columns appear in the 'open email as list' view.
'''If via 'Edit' > 'Find' > 'Search Messages' ?'''
enter search parameters and click on 'Search'
Is this the search results list view that you are refering to?
the default columns should be:
From, Subject, Date, Location
Subject and Location cannot be edited.
Other column headers can be selected in the same way using the far right 'Select columns to display' icon.
Any column headers you select will not be remembered if you close and later peform another search.
If you click on 'Save as Search folder'
This will create a folder in your Folder Pane and you can select column(s) you wish to display.
Any Column headers you choose to display are selected for that saved search folder.
The column headers only change if you select to reset defaults on that folder or from another folder you select to apply to other folders for either the search folder or all folders in the account.
'''If using Quick Filter:'''
The QuickFilter type of search is done on the folder that is selected.
You are still in the same folder, it has simply ''filtered'' what it is displaying, so it will obviously still display the same column headers.

Add column to my tag result list

Hi experts,
In our new service desk tool (crm_ui), we want to add a column to a result list, but I haven't a clue how to add it.
What we do is: we tag certain incidents with a term, and then we follow them up by adding the 'tag' widget on our start page.
When we click on a certain tag that we used multiple times, we see a result list.
But we only see two collums in this list: "operation number" and "description".
How to add a third column: "status"?? I cannot find it anywhere in our viewconfiguration. There are no available fields with this label for the ZSOLMANPRO role.
thx

Hello Kenny,
It is quite complex and you might not be able to archieve it by your own. It is not an ABAP-view. The steps wouold be like that:
1. Open you view (screen) in WebUI (CRMUI).
2. Click on an editable field or hyperlink in the view and press F2 until you get a popup.
3. Read which component and view this is.
4. Go to transaction BSP_WD_CMPWB and enter your component from step 3 and select the right view.
5. Check in the configuration (the right one as shown in the popup of step 2) if you can add a field. I thought you already did that but eventually you did not.
6. If the right field is not available you might try to add the attribute to the context node but this is more complex.
Eventually steps 1-5 are already enough. All of this is WebUI configuration and if you looked your your view in SM34 it might indicate that you are not really familiar with it. So be careful.
Best regards,
Thomas Wagner

Adding columns to result list in inbox view of web client

Similar Messages

Maybe you are looking for