Add columns to attachment overview

Hi gurus,
On SRM portal I've added an attachment to the shopping cart and I see the columns:
Description Category Version Processor Typ File Size (Kb) Inter. Changed By Changed on
I want to add a few columns, how do I do this? I've searched for BaDI's but I cannot find the correct one.
I've also added some extra fields in the ECC system with CL02 and CT04 to a document type. How are those fields shown in SRM? I cannot see any reference.
Kind regards,
Wim van Erp

hi,
Please send mail to SAP service desk with screen shots of earlier version and new version mentioning the problem clearly.
They will definitely give some solution.
Please reward points if helpful.
Thanks
Sivaparavthi

Similar Messages

VA01 add columns to item overview?

Hi,
I'm working on an upgrade project.
If I go to VA01 and click on item overview, the item overview subscreen had some columns in our previous SAP version that are not in our new one.
How do I add those columns??
Thanks!

hi,
Please send mail to SAP service desk with screen shots of earlier version and new version mentioning the problem clearly.
They will definitely give some solution.
Please reward points if helpful.
Thanks
Sivaparavthi

Add new column in Item overview - PO Enhancement

Hello Everyone,
I need help.
I have developed enhancement for adding custom tabs with custom fields in header and item levels of ME2xN transactions using MM06E005 enhancement, but unable to add a field with new column in Item overview (The Middle one).
Can anyone please help.
Thanks in advance.
<removed by moderator>
Edited by: Thomas Zloch on Feb 1, 2012

Hi,,
Functional Requirement: A new tab is needed to add in Purchase Order Transaction at the header level.
Technical Requirements: This functionality can be achieved using Customer-Exits where in SAP provides certain hooks for modifying standard SAP transactions. The enhancement MM06E005 is required to enhance standard screen. This enhancement consists of following exits.
A Function Exits.
B Screen Exits.
C Include Tables
A List of Function Exits are.
EXIT_SAPMM06E_006
EXIT_SAPMM06E_007
EXIT_SAPMM06E_008
EXIT_SAPMM06E_009
EXIT_SAPMM06E_012
EXIT_SAPMM06E_013
EXIT_SAPMM06E_014
EXIT_SAPMM06E_016
EXIT_SAPMM06E_017
EXIT_SAPMM06E_018
B List of Screen Exits are.
SAPMM06E 0101 CUSTSCR1 SAPLXM06 0101
SAPMM06E 0111 CUSTSCR1 SAPLXM06 0111
SAPMM06E 0201 CUSTSCR1 SAPLXM06 0201
SAPMM06E 0211 CUSTSCR1 SAPLXM06 0211
SAPMM06E 0301 CUSTSCR1 SAPLXM06 0301
SAPMM06E 0311 CUSTSCR1 SAPLXM06 0311
C List of Include Tables are.
CI_EKKODB
CI_EKPODB
From the above List those exits in red colored are only required for our purpose
Technical Solution.
The below steps are required to follow to accomplish the task.
1.Find the package name of the transaction by going to system->status.
2.Double click on Transaction name (for e.g. ME21N) look for package name.
Or
3.Double click on Program name (for e.g. SAPLMEGUI) ->click GO TO on menu bar->attributes, look for package name.
Or
4.Double click on Screen no (for e.g. 14) ->attributes, look for package name
5.Go to TCODE SMOD and press F4. Click on Information system and enter Package name
( for e.g. package Name ME was found from above points )
6.We see a list of exits for the mentioned package.
7 Go to TCODE CMOD->Enter a project name (for e.g. MMPRICE).
8 Press->create. If the enhancement MM06E005 is already assign to another project either deactivate it by pressing . Deactivate project button OR we can use that project itself.
9 Enter short text and save the project. Click on button. Type the required enhancement
And press Enter. Press button and save the project. Now we can see the list of exits which are
Required to enhance the screen. Activate the project by pressing activate project button . Check that all the Exits turn into green color.
10 First include fields in the structure CI_EKKODB. This will automatically update Po header Table (EKKO)
11 Use screen exit SAPMM06E 0101 CUSTSCR1 SAPLXM06 0101. Double click on it and activate to get customer ..Design your layout with five fields in screen editor. Name them taking
Dictionary fields as reference (EKKO).Use the custom include programs which are provided for coding purpose.
12 Use exit EXIT_SAPMM06E_006 to get data from existing purchase order. This Function exit consist of import parameters I_EKKO which contains data for corresponding purchase order.
13 Use exit EXIT_SAPMM06E_008 to transport data from purchase order customer screen to changing parameter E_CI_EKKO.The data which is entered on custom screen will be send to this structure and when saved, updates the table EKKO.
Cheers
NZAB

Addition of two more column in Operation overview of inspeciton plan

Dear Experts,
I want to add two more additional column in operation overview of Inspeciton plan.
Please suggest & how it has to be achieved.
Thanks in advance.

Did you try the user-defined fields? If no..
1) Define user fields at configuration
SPRO > Quality Management > Quality Planning > Inspection Planning > Operation > Define User Fields
2) Input the user field key in operation then the user fields will be activated
Regards
Luke

Add column with preq number to ALV grid in me53n

hi all,
i am trying to add column with preq number (BANFN) to ALV with preq items in ME53N. it is not available in column set, when trying to add by "change layout" button - i dont understand why, when the strcucture MEREQ3211GRID contains it :-(
i also tried to add new field ZZBANFN into the structure CI_EBANMEM and after that, i could add the new field to ALV through change layout, but it was empty of course. so i implemented EXIT_SAPLMEREQ_001 from MEREQ001, but ZZBANFN is still empty, because this exit is not called when opening ME53N, but when clicking on tab "customer data" in preq item detail.
how to solve this? is there any exit that is called before displaying the ALV grid?

Here is some more detail. I included my code from the Enhancement.
ENHANCEMENT-POINT MM06EFPO_POT_AUFBAUEN_02 SPOTS ES_MM06EFPO_POT_AUFBAUEN INCLUDE BOUND.
   ENHANCEMENT 1 Z_MM06EFPO_POT_AUFBAUEN_1.    "active version
SELECT SINGLE zz_old_material FROM mara
    INTO pot-zz_old_material
    WHERE matnr = pot-matnr.
ENDENHANCEMENT.
You will also need to change the layout in Item Overview to bring your field in.

The Add Column option isnt working.

The Add Column option isnt working - It just does nothing when I click it. I can go into the code and forcably place a column, but I'd sure like that button to work. Anyone know what's up?

Left click and insert to either left or right.
If it helps this mystery, I tried it on a file I uploaded, someone edited for me, and I downloaded again- and it worked!
Attached it the file it worked on.

To add column in an alv of FITV_POWL_TRIPS component

Hi all
I have a requirement to add column to an alv which is in FITV_POWL_TRIPS.Now the prob is that in that component we r using another compent SALV_WD_TABLE from which alv is taken.This what I understood
fitv_powl_trip
powl_ui_comp- <-getting tabstrips
powl_table_comp-<-getting refresh link
salv_wd_table- <- getting table
As far as I understood I think I have to find the comtext binded to DATA of SALV_WD_TABLE .Im not able to get it.If anyone has previous experience with this pls share
Edited by: m.reeha verma on Apr 30, 2009 6:15 AM

Hello Reeha,
Could you please share the solution for this ?
Thanks in Advance.
Thanks,
Prakhar

How to add column dynamically based on user input in oracle?

**how to add column dynamically based on user input in oracle?**
I am generating monthly report based on from_date to to_date below is my requirement sample table
EMPLOYEE_CODE| Name | CL_TAKEN_DATE | CL_BALANCE | 01-OCT-12 | 02-OCT-12 | 03-OCT-12
100001.............John...........02-OCT-12...............6
100002.............chris...........01-OCT-12...............4
Based on user input, that is, if user need the report from 01-OCT-12 TO 03-OCT-12, i need to add that dates as column in my table, like 01-OCT-12 | 02-OCT-12 | 03-OCT-12....
below is my code
create or replace
procedure MONTHLY_LVE_NEW_REPORT_demo
L_BUSINESS_UNIT IN SSHRMS_LEAVE_REQUEST_TRN.BUSINESS_UNIT%TYPE,
--L_LEAVE_TYPE_CODE IN SSHRMS_LEAVE_REQUEST_TRN.LEAVE_TYPE_CODE%TYPE,
L_DEPARTMENT_CODE IN VARCHAR2,
--L_MONTH IN SSHRMS_LEAVE_REQUEST_TRN.LVE_FROM_DATE%TYPE,
L_FROM_DATE IN SSHRMS_LEAVE_REQUEST_TRN.LVE_FROM_DATE%TYPE,
L_TO_DATE in SSHRMS_LEAVE_REQUEST_TRN.LVE_TO_DATE%type,
MONTHRPT_CURSOR OUT SYS_REFCURSOR
AS
O_MONTHRPT_CURSOR_RPT clob;
v_return_msg clob;
BEGIN
IF (L_BUSINESS_UNIT IS NOT NULL
AND L_FROM_DATE IS NOT NULL
and L_TO_DATE is not null
-- AND L_DEPARTMENT_CODE IS NOT NULL
THEN
OPEN MONTHRPT_CURSOR FOR
select EMPLOYEE_CODE, EMPLOYEE_NAME AS NAME, DEPARTMENT_CODE AS DEPARTMENT,DEPARTMENT_DESC, CREATED_DATE,
NVL(WM_CONCAT(CL_RANGE),'') as CL_TAKEN_DATE,
case when NVL(SUM(CL2),0)<0 then 0 else (NVL(SUM(CL2),0)) end as CL_BALANCE,
from
SELECT DISTINCT a.employee_code,
a.EMPLOYEE_FIRST_NAME || ' ' || a.EMPLOYEE_LAST_NAME as EMPLOYEE_NAME,
a.DEPARTMENT_CODE,
a.DEPARTMENT_DESC,
B.LEAVE_TYPE_CODE,
B.LVE_UNITS_APPLIED,
B.CREATED_DATE as CREATED_DATE,
DECODE(b.leave_type_code,'CL',SSHRMS_LVE_BUSINESSDAY(L_BUSINESS_UNIT,to_char(b.lve_from_date,'mm/dd/yyyy'), to_char(b.lve_to_date,'mm/dd/yyyy'))) CL_RANGE,
DECODE(B.LEAVE_TYPE_CODE,'CL',B.LVE_UNITS_APPLIED)CL1,
b.status
from SSHRMS_EMPLOYEE_DATA a
join
SSHRMS_LEAVE_BALANCE C
on a.EMPLOYEE_CODE = C.EMPLOYEE_CODE
and C.STATUS = 'Y'
left join
SSHRMS_LEAVE_REQUEST_TRN B
on
B.EMPLOYEE_CODE=C.EMPLOYEE_CODE
and c.EMPLOYEE_CODE = b.EMPLOYEE_CODE
and B.LEAVE_TYPE_CODE = C.LEAVE_TYPE_CODE
and B.STATUS in ('A','P','C')
and (B.LVE_FROM_DATE >= TO_DATE(L_FROM_DATE, 'DD/MON/RRRR')
and B.LVE_TO_DATE <= TO_DATE(L_TO_DATE, 'DD/MON/RRRR'))
join
SSHRMS_LEAVE_REQUEST_TRN D
on a.EMPLOYEE_CODE = D.EMPLOYEE_CODE
and D.LEAVE_TYPE_CODE in ('CL')
AND D.LEAVE_TYPE_CODE IS NOT NULL
group by EMPLOYEE_CODE, EMPLOYEE_NAME, DEPARTMENT_CODE, DEPARTMENT_DESC, CREATED_DATE
else
v_return_msg:='Field should not be empty';
end if;
END;
my code actual output
EMPLOYEE_CODE| Name | CL_TAKEN_DATE | CL_BALANCE
100001....................John............02-OCT-12.................6
100001....................chris...........01-OCT-12.................4
how to add column dynamically based on from_date to to_date?
Thanks and Regards,
Chris Jerome.

You cannot add columns dynamically. But you can define a maximum number of numbers and then hide unused columns in your form useing SET_ITEM_PROPERTY(..,VISIBLE, PROPERTY_FALSE);

Can we add a new attachment to an existing SC from any other custom page in SoCo PO View

Hi Experts,
Need your expert advice on the below requirement.
We have created a custom view in SoCo PO page. There we have a New custom view called Notes&attachement.which contains same value from Notes & attachment of Shopping Cart.
We are updating existing Notes of SC by FM 'bbp_pd_sc_update' and same is reflected in SC of same item guid & same header guid.
Similarly trying to add a new Attachment to already existing attachment. New attachment is reflected in custom page and the describe link is working perfectly. but if come out of SoCo page , lets say in SC the new added attachment is shown but display_url,phio_size etc are not stored properly in DB.
in bbp_pd transaction every thing looks same for new and existing attachment. we are using same FM 'BBP_PD_SC_UPDATE' by passing new internal table of attachment in import statement. Even 'BBP_PROC_DOC_UPADTE' has same result that is attachment is partially updated.
Suppose, SC has one attachment at the time of creation. then adding a new attachment in custom view of SoCo PO page then every thing works fine in SoCo PO page but out of that SoCo PO or in SC the newly added attachment is not properly updated.
I have added mime_type,phio_size,disp_url,file_name,file_ext,ev_content of new attachment in existing attachment internal table and calling above FM for update.
Can we add new attachment outside SC to existing SC ? if yes , then how?
Thanks,
Partha

Hi Partha,
Please post this query in the category: SAP SRM. Your post currently shows up on the forum - SRM User Interface Add-on. As your query is not related to the new ad-on, you might not get as many responses in this forum as you would have if you had posted the query in the general SRM forum (http://scn.sap.com/community/srm).
Hope this helps
Cheers,
Yateesh

How to add columns in field-symbol

Dear All,
Have made a report for HR - ZHR_CTC by using logical database and field-symbol. Report is working fine, but now have to add columns e.g business area text, positions text etc.
Have added columns in field-symbol.But not able to fetch data into that.
Data has to be fetched from different trasparent table comparing <field-symbol>-field.
Plz suggest the proper way to do it.
<<text removed>>
Regards,
Gulrez Alam
Edited by: Gulrez Alam on Dec 16, 2008 11:02 AM
Edited by: Matt on Dec 16, 2008 11:36 AM

Hi Rimpa,
Thanks a lot for you reply, have tried ur suggestion but it's not working. I am not able to understand how to insert data into field-symbol. Plz give some more clarifications about the same.
Regards,
Gulrez Alam

How to add column access BADI to appraisal template.

I am not able to see option to add column access BADI in template at Processing tab--> Further template behaviour.
Kinldy let me know how to add it.
I am able to see only following options
BC         Business Check
D1         Default Appraiser
D2         Default Appraisee
DE         Default Execution Period
DN         Default Appraisal Document Name
DP         Default Part Appraiser
DR         Default Review Date
DV         Default Validity Period
HA         Header Data Change
PM         Maximum Number of Part Appraisers
Thanks in advance.
Dhananjy

Hello Ravikiran,
Based on the Role and Status of the appraisal form, turn the Column On/Off/Hide..
sample code...
case s_header_status-ap_status.
          when c_status_in_preparation.
            availability = 'H'.
            column_owner   = space.
          when c_status_in_planning.
            case s_body_columns-column_id.
              when 'OBJ0'.
                availability   = 'X'.
                column_owner   = 'X'.
                exit.
              when 'Z003'.
                availability   = 'X'.
                column_owner   = 'X'.
Hope it helps...
Regards,
Jothi.P

How to add a normal attachment in my apple mail?

Apple mail is so slow when I want to add attachment to my message. I think the reason is that when I add eps file or other files, apple mail does not simply add it, but integrating it into my context. But I don't need it to do that. And because the process is so slow(my eps file is kind of large...), it wastes a great amount of my time doing it. So far I'm satisfied with other functionalities of this software so I really don't want to give it up easily.
So, any one know if there is a simple way to add a normal attachment into apple mail message? Like what we usually do in any other email client? Thanks.

Try turning them into a zip file before attaching. From Finder Help:
Compress and uncompress files and folders
Compressed files take up less disk space than uncompressed files, so compressing is useful for making backup copies of your data or for sending information over the Internet.
To compress a file or folder, Control-click it or tap it using two fingers, and then choose Compress from the shortcut menu.If you compress a single item, the compressed file has the name of the original item with the .zip extension. If you compress multiple items at once, the compressed file is called Archive.zip.
To uncompress (expand) an item, double-click the .zip file.

Need to add a simple logo / overview of brand to page (newbie)

Hi there -
I am trying to add a new logo / overview for a company on the Partnerships page of http://cornerstonebuilding.com/ but I can't figure out how to do that in code or in design mode.
Any guidance would be greatly appreciated.

Hi,
To access your logo go into your site admin panel and locate site manager > pages.
Select the page Partnerships and select/replace in the design view.
Or if you know the source location of the new logo file you can update in the HTML view.
Hope this helps!
-Sidney

Add columns in system matrix

Hi experts,
I need help urgently. I want to add columns in the matrix of A/R invoice system form.
Can someone give me a solution?
Regards.
Olivier

Olivier
You can add user defined fields into Marketing document rows, these will be new columns and will appear U_[COLUMNAME]
Regards
J
Edited by: János Nagy on May 18, 2010 2:01 PM

Add Column name conditionally in a query

Hi i have an stored procedure where one parameter is passing
@Type
UserTable (columns) => username, canAdminDelete,canCustomerDelete,CanMerchantDelete
i wants to add column conditionally like when usertype =1 then query should be like
Select * from userTable where canAdminDelete=0
when userType=2
Select * from userTable where canCustomerDelete=0
Like in this way. I know i can write three if statments and write specific query.
But this is just an example i have very big query actually.
Please give some idea.
Thanks
Niki

Hi Niki,
As per my understanding, I think the query post by Olaf is correct. It only return the results when column canAdminDelete = 0 and userTpe = 1 or column canCustomerDelete = 0 and userType = 2.
So when userType=1 and column canAdminDelete=1, how could you get the results? Could you please test the issue again based on the query post by Olaf.
If there are any misunderstanding, please elaborate the issue for further investigation.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Add columns to attachment overview

Similar Messages

Maybe you are looking for