VA01 add columns to item overview?

Hi,
I'm working on an upgrade project.
If I go to VA01 and click on item overview, the item overview subscreen had some columns in our previous SAP version that are not in our new one.
How do I add those columns??
Thanks!

hi,
Please send mail to SAP service desk with screen shots of earlier version and new version mentioning the problem clearly.
They will definitely give some solution.
Please reward points if helpful.
Thanks
Sivaparavthi

Similar Messages

Add new column in Item overview - PO Enhancement

Hello Everyone,
I need help.
I have developed enhancement for adding custom tabs with custom fields in header and item levels of ME2xN transactions using MM06E005 enhancement, but unable to add a field with new column in Item overview (The Middle one).
Can anyone please help.
Thanks in advance.
<removed by moderator>
Edited by: Thomas Zloch on Feb 1, 2012

Hi,,
Functional Requirement: A new tab is needed to add in Purchase Order Transaction at the header level.
Technical Requirements: This functionality can be achieved using Customer-Exits where in SAP provides certain hooks for modifying standard SAP transactions. The enhancement MM06E005 is required to enhance standard screen. This enhancement consists of following exits.
A Function Exits.
B Screen Exits.
C Include Tables
A List of Function Exits are.
EXIT_SAPMM06E_006
EXIT_SAPMM06E_007
EXIT_SAPMM06E_008
EXIT_SAPMM06E_009
EXIT_SAPMM06E_012
EXIT_SAPMM06E_013
EXIT_SAPMM06E_014
EXIT_SAPMM06E_016
EXIT_SAPMM06E_017
EXIT_SAPMM06E_018
B List of Screen Exits are.
SAPMM06E 0101 CUSTSCR1 SAPLXM06 0101
SAPMM06E 0111 CUSTSCR1 SAPLXM06 0111
SAPMM06E 0201 CUSTSCR1 SAPLXM06 0201
SAPMM06E 0211 CUSTSCR1 SAPLXM06 0211
SAPMM06E 0301 CUSTSCR1 SAPLXM06 0301
SAPMM06E 0311 CUSTSCR1 SAPLXM06 0311
C List of Include Tables are.
CI_EKKODB
CI_EKPODB
From the above List those exits in red colored are only required for our purpose
Technical Solution.
The below steps are required to follow to accomplish the task.
1.Find the package name of the transaction by going to system->status.
2.Double click on Transaction name (for e.g. ME21N) look for package name.
Or
3.Double click on Program name (for e.g. SAPLMEGUI) ->click GO TO on menu bar->attributes, look for package name.
Or
4.Double click on Screen no (for e.g. 14) ->attributes, look for package name
5.Go to TCODE SMOD and press F4. Click on Information system and enter Package name
( for e.g. package Name ME was found from above points )
6.We see a list of exits for the mentioned package.
7 Go to TCODE CMOD->Enter a project name (for e.g. MMPRICE).
8 Press->create. If the enhancement MM06E005 is already assign to another project either deactivate it by pressing . Deactivate project button OR we can use that project itself.
9 Enter short text and save the project. Click on button. Type the required enhancement
And press Enter. Press button and save the project. Now we can see the list of exits which are
Required to enhance the screen. Activate the project by pressing activate project button . Check that all the Exits turn into green color.
10 First include fields in the structure CI_EKKODB. This will automatically update Po header Table (EKKO)
11 Use screen exit SAPMM06E 0101 CUSTSCR1 SAPLXM06 0101. Double click on it and activate to get customer ..Design your layout with five fields in screen editor. Name them taking
Dictionary fields as reference (EKKO).Use the custom include programs which are provided for coding purpose.
12 Use exit EXIT_SAPMM06E_006 to get data from existing purchase order. This Function exit consist of import parameters I_EKKO which contains data for corresponding purchase order.
13 Use exit EXIT_SAPMM06E_008 to transport data from purchase order customer screen to changing parameter E_CI_EKKO.The data which is entered on custom screen will be send to this structure and when saved, updates the table EKKO.
Cheers
NZAB

Adding a new column to item overview screen 4900 in sales order transaction

Hi All,
I want to add a new column to refer to a custom field in screen 4900 ( Item overview screen ) in sales order transaction. Please suggest appropriate exit or BADI for the same. Give all steps to do the same.
Thanks in adavance.
Jawahar.

Hi
As the link that RamKi let us know, this is a modification, so, I suggest to avoid. See SAP Note 862228 - Order reason for returns on item level for further information. I suggest to use the other enhancements in tabs.
Regards
Eduardo

PO Screen Layout change, Addition of one column in Item Overview screen!

Hi All,
I have one typical requirement where in user wants to add one column in the Item overview screen, example "Reason for ordering" which is there in Item Detail under Retail Tab!
Can anyone suggest, How can i get this done? and also i want to know if there is any possibility to add this field at header level??
please let me know if i'm not clear in describing the issue...
Suggestion and solutions would be rewarded & appreciated,
Thanks in Advance..
Regards,
Siddaram

hi,
Check sap note 458591..
Regards
Priyanka.P

Adding new column to item overview tab of warranty claim

Hi all,
I need to add an additional column to the item overview tab of the warranty claim.( transaction WTY ).
If anyone has done this before then please send the details as to where and how this needs to be added.If added what are the necessary tables which needs to be updated.Is there any BADi or user exit to change and update this data .. ?If not how can this be done .. ?Is this a feasible requirement.. ?Please let me know soon.
Cheers
Nishanth

Hi Neelima,
Please investigate the use of customer fields for meeting this requirement.
Regards
Azad

Add columns to attachment overview

Hi gurus,
On SRM portal I've added an attachment to the shopping cart and I see the columns:
Description Category Version Processor Typ File Size (Kb) Inter. Changed By Changed on
I want to add a few columns, how do I do this? I've searched for BaDI's but I cannot find the correct one.
I've also added some extra fields in the ECC system with CL02 and CT04 to a document type. How are those fields shown in SRM? I cannot see any reference.
Kind regards,
Wim van Erp

hi,
Please send mail to SAP service desk with screen shots of earlier version and new version mentioning the problem clearly.
They will definitely give some solution.
Please reward points if helpful.
Thanks
Sivaparavthi

Add custom fields in VL02N under Item overview tab

Hi,
In VL02N, I need to add two input fields under the tab "Item Overview"...
I found the BADI LE_SHP_TAB_CUST_ITEM but it is for adding a new tab i guess....
Is there any way to add fields under item overview only ??

Hi,
find the enhancements for those transactions by using SE24 or goto transaction > choose status option> find program name--> enter program name in SE38 --> goto attributes and find the package --> then goto SE84 give the package name in the enhancements.
If u want to add the custom field in the perticular tab -> goto that perticular screen> click on status button> find the program name and screen no:> go for SE51 give tha deatils and find the enhancement .
Thanks,

Adding a column at item level while creating PO using ME21N

Hi,
My requirement is to add new column in Item overview of PO at the time of creation. Same should be displayed in ME22N and ME23N.
I tried doing same using BADI ME_PROCESS_PO_CUST using interface PROCESS_ITEM after adding field QSSYS in EKPO table.
I have also tried exit MM06E005 / EXIT_SAPMM06E_013.
Kindly let me know steps.
Thanks & Regards,
Vidhi

Hi Vidhi,
I think you can not add new column in standard one. Create a custom tab at item level and use that.
[Me21n Tab|http://wiki.sdn.sap.com/wiki/display/ABAP/DetailedexplanationaboutBADIandthewaystofindtheBADIwithanexample%28ME23n+transaction%29]
Regards,
Madhu.

How to add column in the item overview screen (4900) in sales order?

Hello Experts,
I have a requirement to add a column (Field - Size/Dimensions - MARA-GROES) in the Item Overview Screen (4900).
Is there any provision for that? Any enhancement or screen exit or so?
Quick response will be appriciated.
Thanks in advance.
regards,
hp

Hi
As the link that RamKi let us know, this is a modification, so, I suggest to avoid. See SAP Note 862228 - Order reason for returns on item level for further information. I suggest to use the other enhancements in tabs.
Regards
Eduardo

Add a new column in item table control of va01 screen

Hi All,
i have requirement to add new column in item table control of va01 screen 4900 for the custome field of vbap table
the required coloum is add with the help of access key
however whem i am trying to save data, that custom field is not populate
please let me know if any one had work on this

I think i solved the problem . The single way to to that is to modify the SAP standard Screen.

VA01 : How to add field ship to party to tab Item Overview

Standard SAP is filling the ship to party on item level by default with the value entered on order header level. In case you added multiple items for an order and you want to change the ship to party for 1 or 2 items, you have to doubleclick on the line and then go to tab Partners and change the ship to party item by item by using the next and previous item button. We would like to add a column including the SH partnervalue to tab Item Overview (sapmv45a 4900) so we will be able to change the ship to party for an item on 1 screen. Is it possible to add a new colum (via a userexit / badi)?
kind regards
Angelique Heutinck

Seems its not possible through standard SAP.we had the similar req in our project so what we did is we append the structure VBAP and added one new z field .... i reckon the same way you can do it for ur req as well.in short you need the access key.
Please do let me know if u fnd another way to fix the problem i mean without access key.
Best of luck
Jess

Add field to item position overview of Purchase Order

Dear SRM gurus,
I'm working on a change request of a customer.
They want to add a field to the item overview position of Purchase Orders.
They are using SRM 4.0 in Extended Classic Scenario.
When displaying the list of Purchase Orders only the headers are shown. When clicking on a header the item positions are shown below the header. In this item overview the customer wants a field to be added.
The field to be added is the GL Account. The customer wants this field to be visible before opening the item of the Purchase Order.
We already know which screen should be changed to display the field.
The screen is SAPLBBP_PO_UI_ITS and screen number 4000.
Is it possible to add fields to this screen?
If it is possible, how can this be done?
Thank you in advance for your support,
Best regards,
Jean-Pierre

Is there a solution yet?
At my company they also want to add a column to block Items in Shopping Cart.
The structures mentioned in the note are all in the item details but not in the overview.
regards,
Wim

How can i add to a listBox items near in a new column other items ?

The items on the right i changed the property of the listBox1 righttoleft to Yes.
My problem is i want to build a new column for the number so each number i'm adding will be next on the left to the belong item string. And not under it like now.
1. Maybe i need to use another control and not listBox ?
2. How can i add column/s and also maybe adding a title to each column like: Names Id Number....?

If you want columns, you should consider a
ListView or
DataGridView.

How to add a column in Item Master form with chooselist

Hi Experts
I add a column in Item Master Form in Stock Data Tab. In this column I want to add Choose list. For this I use AfterFormLoad event. It gives Error "Matrix Line Exist" . My code is given below
If pVal.FormType = "150" Then
                form = B1Connections.theAppl.Forms.GetForm(150, pVal.FormTypeCount)
                form.PaneLevel = 3
                oItem = form.Items.Item("28")
                oMatrix = oItem.Specific
                Dim chooseObj As ChooseListClass
                chooseObj = New ChooseListClass
                chooseObj.AddChooseFromListBinCode(form.UniqueID)
                oColumns = oMatrix.Columns
                oColumn = oColumns.Add("BINCODE", BoFormItemTypes.it_EDIT)
                oColumn.Width = 100
                oColumn.DataBind.SetBound(True, "OITW", "U_BINCODE")
                oColumn.TitleObject.Caption = "Def BinCode"
                oColumn.Editable = True
                oColumn.ChooseFromListUID = "CFL5"
                oColumn.ChooseFromListAlias = "U_BinCode"
                oColumn = oColumns.Item("U_BINCODE")
                oColumn.Visible = False
            End If
please give your suggestion
Regards
Jitender

Hi Noor
Thanks for reply
I tried your suggestion but problem still there. I am using after form load event. Here matrix has 9 lines (all warehouse). If remove the line then how can I reload warehouse data. Can you suggest in more detail.
my code is given below
form = B1Connections.theAppl.Forms.GetForm(150, pVal.FormTypeCount)
                form.PaneLevel = 3
                oItem = form.Items.Item("28")
                oMatrix = oItem.Specific
                MsgBox(oMatrix.RowCount)
                oMatrix.DeleteRow(1)
                Dim chooseObj As ChooseListClass
                chooseObj = New ChooseListClass
                chooseObj.AddChooseFromListBinCode(form.UniqueID)
                oColumns = oMatrix.Columns
                oColumn = oColumns.Add("BINCODE", BoFormItemTypes.it_EDIT)
                oColumn.Width = 100
                oColumn.DataBind.SetBound(True, "OITW", "U_BINCODE")
                oColumn.TitleObject.Caption = "Def BinCode"
                oColumn.Editable = True
                oColumn.ChooseFromListUID = "CFL5"
                oColumn.ChooseFromListAlias = "U_BinCode"
                oColumn = oColumns.Item("U_BINCODE")
                oColumn.Visible = False
                oMatrix.AddRow(1)
Thanks
Waiting for reply
Regards
Jitender

Additional field in view "item overview" VA01

Hi,
I want to add an additional field to the view "item overview" (SAPMV45A Screen 4900).
It's the field vbap-knuma_ag and it's actual not included in tab control of Screen 4900.
How can I do that ?
Is that a modification ?

Hello Mr. Schöpferle,
have you received any feedback or have you found a solution on your own?
I have exactly the same request and I do need to avoid a modification.
Thank you
Karin

VA01 add columns to item overview?

Similar Messages

Maybe you are looking for