Add custome field in VA01/VA02/VA03 without access key

Hi,
I need to add some custom fields in VA01/VA02/VA03 screen at item level. But i am unable to find out any screen exit/BADI for the same.
Can anyone tell me plz how i can achieve this without using access key.
Thanks in advance.

hello,
you could try using GuiXt. With this adds on you could add: fields, button, input parameters, change standard screens layout etc.
read this tutorial http://www.synactive.com/tutor_e/lesson00.html for the start.
br,
dez_

Similar Messages

Creating customer fields in VA01/Va02 transaction in additonal tab 2

hi,
I have to create Customer fields in the item level to va01 / va02 transaction in additional tab 2 subscreen.
Include MV45AFZZ is used for validation. help needed for adding customer fields. thanks in advance.

The program SAPMV45A screen 8309 is the Additional Data B tab provided by SAP to add your custom fields . In order to capture the data from your custom fields you can use the user exit MV45AFZZ, USEREXIT_SAVE_DOCUMENT_PREPARE OR
USEREXIT_SAVE_DOCUMENT depening on your functionality.
You need to append the fields in VBAP. Then use the screen painter to add the fields in the screen.
Thanks
Vinod

Add Custom Field to VA01

Hi Experts,
I have to add one field to screen in transaction VA01. I have the below details:
Program Name: SAPMV45A
Screen Number where field is tobe added: 8459 ( Its properties says as Subscreen)
I didnot find a enhancement name that include a screen exit for this 8459 screen.
I tried to add field by using SE51 with SAPMV45A / 8459 input and edit screen in screen painter, it allows me adding a field there but I cannot save it as once I enter the transport request for this change, It says "No Task available in transport request" and neither it allows me to create one for this change.
Should it allow me to add the field by directly going through SE51?
I want to know the approach to be used to add a field onto screen 8459 and I already have a corresponding field in VBAP structure.
I have a project created in CMOD but I dont have Enhancement name that contains the screen exit to do the changes. I have searched all exit available via SMOD.
Please help.
Thanks
Kiran

You need to have the SAP access key to modify the screen and add the field which already been added in VBAP using the Append structure in SE11
Thanks,
Babu Kilari

Update custom field in VA01/VA02 after message V1152

Hi experts,
The consultant wants the following issue:
Whenever a sales order is saved, if the error V1152 raises, I new field in additional Tab B must be filled. I knwo where this error raises but not how to check this error in user exit SAVE_DOCUMENT o SAVE_DOCUMENT_PREPARE in order to update that field
Any suggestion pleade ??
tanks in advance!!
María

Hello Maria,
This message can be suppressed by the functional settings in OVA8.
Goto T.code OVA8 --> select the entry applicable for you ---> click on display icon.
A new screen would appear like below.
You can either uncheck the Dynamic credit checkbox or change the reaction to <blank> or anything in F4 help.
You can also create a routine and assign it under document controlling --> No credit check.
Do a F4 help in that routine field and refer to the standard routine "001" available in system to get some idea on how to use routines.
Regards,
Thanga

Adding custom fields to VA01 additional data tab without access key

I have to add custom fields at item level in transaction VA01/VA02.
Is access key required to add fields to additional data screen i.e 8459 ?
Is there any way to do this without using access key ?

Hi ,
Try for any User Exit or BADI available for the tcodes.
Here are exits for VA01 and VA02.
Exit Name           Description
SDTRM001            Reschedule schedule lines without a new ATP check
V45A0001            Determine alternative materials for product selection
V45A0002            Predefine sold-to party in sales document
V45A0003            Collector for customer function modulpool MV45A
V45A0004            Copy packing proposal
V45E0001            Update the purchase order from the sales order
V45E0002            Data transfer in procurement elements (PRreq., assembly)
V45L0001            SD component supplier processing (customer enhancements)
V45P0001            SD customer function for cross-company code sales
V45S0001            Update sales document from configuration
V45S0003            MRP-relevance for incomplete configuration
V45S0004            Effectivity type in sales order
V45W0001            SD Service Management: Forward Contract Data to Item
V46H0001            SD Customer functions for resource-related billing
V60F0001            SD Billing plan (customer enhancement) diff. to billing plan
Regards,
Lakshman.

Adding custom fields in va01

Hi Experts,
I have an requirement to add custom fields in VA01 at the header level(screen area where sold-to-party,
ship-party,Etc shown). These custom are already available in the screen va01->goto ->header->additonal functions->
additionl data B. I need to bring these fields in initial screen of VA01 based on order type.
Is ther any user-exit to do this or Should I do the repair for it
I appreicate your suggestions
Thanks ,
Santhosh

hi,
First find the program name of VA01
then the package of the program of VA01
the goto-. se84->click on enhancement button ->customer Exit->enhancements->give package name and execute
now find all the Exit in this transaction
hope this helps
Regards
Ritesh

How can we add new fields in item customer detail B tab in VA01/VA02/VA03?

Hi all,
Anyone can suggest me, how we can add fields in item detail B tab of VA01/VA02/VA03 transaction.
1) How we can find the screen no and how we can add fileds in it
2) where we have to write the logic for these fields ( I mean in which include)
3) Is there any user exit or BADI for this
4) what is the procedure to do this enhancement .
5) How we can enhance menu bar
i am using ECC 6.0 version.
Please guide me in this .
Thanks in advance.

Hi,
You do not have to do extra coding for this. Just append the extra fields in the table VBAP and include these in the screen 8459 (Additional data A) or 8460 (Additional data B) of program SAPMV45A.
https://forums.sdn.sap.com/click.jspa?searchID=12244867&messageID=1939475
Regards
Kiran Sure

Adding Custom Fields to the Sales Order Screens - VA01, VA02 & VA03

Hi,
I have a requirement to add custom fields in the Sales Order Standard Screen. Could anyone please tell me is there any screen exit available to add a tab screen or is there any possibility without modifying the standard code.
Please let me know with the details.
Thanks & Regards,
Goutham.

Hi Narendran,
Thanks for prompt reply, it was very useful.
Could you please let me know the procedure you have followed in coming to this conclusion of what screens to be used.
I understand that the program is SAPMV45A.
Thanks & Regards,
Goutham.

Is it possible to add 'Additional Data C' tab in VA01/VA02/VA03

Hi All,
Is there any way or in config that we can enhance the VA01/VA02/VA02 with one more tab other than 'Additional Data B' tab.
i want to add 'Additional Data C' tab for a requirement.
Please give your valuable comments.
Thanks,
Jaffer Ali.S

Hi ,
It can't done for the VA01/VA02/VA03.
these are available for the .
V45A0001 Determine alternative materials for product selection --->The Description of this enhancement tell us that it determines the alternative materials for product selection. (i.e., If one material is not available what is the other material that has to be used as an alternative. So it is item specific).
V45A0002 Predefine sold-to party in sales document--->By Description we understand that we can predefine sold-to party in the sales document. (i.e., it is used to populate the field sold-to party through user-exit while entering the data. ) But our requirement comes after entering the data in the screen and save button is pressed.
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal---->Copy packing proposal Into Out bound delivery. This description implies that whenever we create a Delivery Order from Sales Order it copies the packing proposal Based on the already created Sales order. So, there is no chance for us to save the data while we create or change a Sales order.
We can't done.
Regards,
Bharani

Regarding VA01/VA02/VA03 - Adding a new field column to the Overview table

Hi,
Apologies if this is not the right forum, but I have a request to add an extra column into the main overview screen in VA01/VA02/VA03. The field I want to add is available from the Sales Header Data > Purchase Order Data tab (Ship-to party > Your Reference field. VBKD-IHREZ_E).
Normally from the Sales Overview, I would go to Configure Table Settings > Administrator and then tick/untick the fields i want to display, but in this case, this partficular field is not available from the list of fields to choose from (although other fields on the Purchase Order Data tab are available to be included/excluded from the main Sales Order Overview).
Does anyone have any suggestions on how i can get this field included as a selection field, and therefore have it as a column in the main Overview table?
Kind Regards,
George

Closing this post. No longer a requirement for us.

Adding Z-Fields to Standard Screens of Transaction VA01 / VA02 / VA03

Hi All,
The system is being upgraded from 4.7 to ECC 6.0
In 4.7 server, the client has added 2 Z-fields to VBAK table. Moreover, these Z-fields are added to Standard SAP Screens of Transactions VA01 / VA02 / VA03.
One of the Z-field is for the Description which appears on the very first screen of transaction (Screen 4440) replaces the Standard SAP Screen Field VBAK-KTEXT.
The other Z-Field appears on Header-->Additional Data B (Screen 8309).
Please note:- The screen numbers that are mentioned above are the screen numbers of ECC 6.0
I tried to change the edit the Screen by taking the Access Key from the market place, but only got Screen Overlapping Errors.
What should I do to incorporate these Z-fields?
I have heard of Screen-exits but never worked on the same. Would appreciate if someone guides me as to what needs to be done.
Thanks for your valuable time and suggestions.
Regards,
Rajesh

Hi Rajesh,
I am working ECC 6.0
We had the same requirement but for Additional Data B in header and item
For this
(1) Got the access key
(2) applied access keys
(3) In the additonal Data B screens/Program SAPMV45A imported Z fields to the screen in Graphical painter,saved and activated after writing necessary PBO/PAI modules and the codes in 8309 and 8310 screens
Please can you tell more on the "Screen Overlapping Errors"
Maybe we can can work out the error.....
Regards
Byju

Subscreen 8460 in VA01/VA02/Va03

Hi All,
There are 2 Subscreen's in 'Additional Data B' tab in VA01/VA02/VA03.
My doubt is, when some ehancements are done in subscreen 8459 of 'Additional tab B' and transported already to production, and if i add new field in subscreen 8460 of 'Additional tab B' and transport it to production, will it affect the development already done in 8459.
I hope it won't affect since it is a seperate subscreen.
But make me clear on this and give me a firm answer on this.
Thanks,
Jaffer ali.S

Hi as both the screens are different there might not be any issues and as thet comes under different request there by no relation between each other in the production server too.
Cheers!!
Venkat

How to restrict tcode va01/va02/va03 for a particular role

hi ,
I have a requirement . I need to restric user fro VA01/VA02/VA03 if the user has role and Sales order customer group is related to a particular group .
Do we have a Function module to get a role for a user or can we write a code as authorization level or do we need to write it as user exits of va01/va02/va03 .
Regards ,
Prakash

hi All ,
My issue is I need to restrict the tcodes for a particular customer group is there in the sales order , that means it is order specific and I already know for which roles it is to be checked .
Now can we write any check in pfcg tcode so that we can check at particular group or need to handle at user exit level .
Thanks in advance .
prakash

How we can add custom field in standard report 2kee.

Hi,
How we can add custom field in standard report 2kee.
I need one extra field to add in 2kee report for the same is there any customization req.
Regards
Ravi

Ravi,
Which extra field do you want to add or see? Without specifying the field, it is difficult for one to tell you precisely whether you need a custom field or just change the layout to get the standard one.
There are so many fields which exists but are not displayed when you execute 2KEE. You need to change the layout selections to your preference.
Nonetheless, if the field you want to add does not already exist, then yes you can do customization. Is there a customization requirement? No. But remember, you are making changes to SAP Standard program which will no longer be supported by SAP should in the case an issue arise in the future related to this very program.
Have your abaper add the said field in the program or why not just create a query to pull the report?
Elias
Edited by: Elias Akorli on Sep 18, 2009 9:02 PM

Add Custom Fields in FB70?

Is it possible to add custom fields in FB70 to capture extra data?
We enter FI-A/R invoices in FB70 and would like to capture data in the custom fields of sales order (VA02) additional data B screen for reporting purposes. (We do not use debit memo.)

Hello,
You can see the screen variants in FB70. However, these screen variants are for that particular session of posting. Once you come back, then you will have standard screen for posting in FB70.
I would suggest not to change any forceful changes to FB70 screen to avoid any further complications in future upgrades.
Regards,
Ravi

Add custome field in VA01/VA02/VA03 without access key

Similar Messages

Maybe you are looking for