Add Customer Name to KE24
Good morning, All
User requirement to add customer name to the output of KE24. Customer number is already there. Could easily link to KNA1 to get NAME1. I'm hoping that there is an easy way to extend a structure or something to accomplish this but all my searches for such a solution have come up empty.
Help!!!
Cheers...
Chad
Hi Chad
Customer Name is available in all the reports... This is a std feature...
Execute KE30 report in Classic Drilldown Option... Customer Name & Key is always available..
After executing KE30 in Classic Drilldown Option,
1. Drilldown on CUSTOMER
2. Goto Menu Settings > Char Display and choose KEY/NAME or NAME/KEY
If you Execute KE30 in "Object List" Option, then after execution - Change the layout and plug in the field "Customer Text"
Regards
Ajay M
Similar Messages
-
Hi
I am required to add customer a/c no and name in Fbl3n output.
I have applied notes 112312 and368310.customer a/c no is displaying. But customer name is space for all items.
Any one help me out.
ThanksGoutham
I already did this. But customer name is still blank.
Pls check below code.
FUNCTION ZFI_CUSTOMER_NAME.
*"*"Local Interface:
*" IMPORTING
*" VALUE(I_POSTAB) LIKE RFPOS STRUCTURE RFPOS
*" EXPORTING
*" VALUE(E_POSTAB) LIKE RFPOS STRUCTURE RFPOS
*-------------- Initialize Output by using the following line ----------
e_postab = i_postab.
check i_postab-umskz ne space.
tables t074t.
data: n type i.
statics i074t type t074t occurs 0 with header line.
describe table i074t lines n.
if n eq 0 .
select * from t074t into table i074t.
endif.
read table i074t with key spras = sy-langu
* koart = 'D'.
koart = i_postab-koart
shbkz = i_postab-umskz.
if sy-subrc = 0.
write i074t-ltext to e_postab-Z_NAME.
else.
e_postab-Z_NAME = space.
endif.
ENDFUNCTION. -
Add customer name to sgtxt through RGGBS000
I got a requirement which says sgtxt should populate with customer name for RV type document. where can I add the coding for that.
The requiremnt says, create z version of the program and add the logic, which form I can add the logic?
Please adviceHi Thomas,
If you want to just populate the Customer Name in SGTXT, then your objective can be achived through usage of substitutes. Below is the process:
GO to : GGB1
Create New Substitute in Call up point Line Item
Substitue:
Select the feild : BSEG-SGTXT
Select the radio button - Feild to feild assignment
Prerequisit : BKPF-BLART = 'RV'
Substitution : TEXT Field = BSEG-KUNNR.
Now Goto GGB4 and activate the subsittute for relevant company code.
Hope that will full fill your requirement.
Thanks & Regards
Krishna Chaitanya -
JS scripted needed to add custom text plus filename to file info in document title
Would greatly appreciate any help with this one...
JS script to add custom text plus filename to file info in document title
many thanksSuper :O)
I have a folder of say 50 images and I want to run a JS script batch
example in the document title : image Nr 81205
custom text is "image Nr" + file name "81205"
activeDocument.info.title =" image Nr" + decodeURI(activeDocument.name);
would this be correct without seening the file ext
many thanks -
How to add custom fields in BADI Subscreen.
Hi Friends,
I have to include some custom fields in MFBF tcode.(In make-to-order tab page).
To do that I have used RM_HR_INTEGRATION BADI definition and created implementation for this. In the provided subscreen I tried to add custom fields but it asks access key . I donu2019t know , how to proceed further. Your help is needed.
Or kindly provide me solution to achieve my requirement.
Thanks in Advance,
senthil.Hi Venky,
We can see the documentation in
se18 -> badi -> LE_SHP_TAB_CUST_HEAD -> display -> documentation button above the definition name
in the first pop-up of documentation..go to the end which says 'Further notes'
Further notes
Documentation on BAdI Interface LE_SHP_TAB_CUST_HEAD
click on this and we have a detailed description of each method defined in the badi
Hope it helps
Regards
Byju -
Add Custom CSS to SharePoint Foundation 2010
I have SharePoint Foundation 2010. I am trying to use custom CSS to override the out of the box CSS. I have linked my CSS file within the master page a million different ways but nothing seems to work.
Can this be done in Foundation or do I need to purchase Server?Hi Tory,
How did you add the custom CSS for SharePoint 2010 foundation?
You can upload the CSS file into a library at the SharePoint site collection, then use <SharePoint:CssRegistration name="<% $SPUrl:~SiteCollection/Style Library/Custom/styles.css %>" After="corev4.css" runat="server"/> to include a reference
to your custom CSS file.
In addition, please clear SharePoint cache, and do an IISRESET, then compare the result.
More information, please refer to the links:
http://labs.steveottenad.com/add-custom-css-to-a-sharepoint-2010-site/
http://msdn.microsoft.com/en-us/library/gg447066.aspx
Best Regards,
Wendy
Wendy Li
TechNet Community Support -
Hi Experts
i have a reuirement where i have to add custom field in delivery address/performance location tab in SRM shopping cart and Ship to address Pop-up in SRM PO
i am doing below steps for this.
1. Adding custom field ZZfield in structure INCL_EEW_PD_PARTNER_CSF by using append structure.
2. Spro ->Supplier Relationship Management -> SRM Server -> Cross application basic settings -> Extensions and field controls (personalization) -> Configure field control ->Configure Control for Fields of Substructures
then click on "Metadata for Fields of Substructures and Table-Like Enhancements"
add the below entry
Bus. Object Set Type : I am trying 7 and 29
Structure Field Name : ZZfield
Bus. Object Type : BUS2121/BUS2201
Set Level : Item
Field Visible : Check box should be checked
Field Enable : check box should be checked
Can anyone has the idea of this?
Thanks
RohitHello Rohit,
Please create a enchancement for component /SAPSRM/WDC_UI_DO_SHIPTO.
Add new input field and label in view V_DODC_SHIPTO.
Bind the input field value with field ZZfield from structure /SAPSRM/WDC_UI_DO_SHIPTO in the context node SHIP_TO .
Regards,
Neelima -
How to get customer name automatically in table maintainance generator
Hi all,
I am having a table maintainance generator in which ship to party is the primary key, i need to add another column customer name
fetched from KNA1, i tried using the event
5.new entries creation, creating a new perform
but the code which i am writing gives an error "Statement in accessible".
Kindly help.Hi Manohar,
Thanks for your help, Its working now.
Issue resolved. -
Add customer button on header level for BUS2201(PO) - SRM 7.0
Hi,
I want to define a customer button (with action) within PO on header level.
Web Dynpro FPM_OIF_COMPONENT
Configuration /SAPSRM/WDCC_FPM_OIF_PO_PURCH
Task:
Add a customer button besides standard Export button.
I assume-afterwards I have to enhance the method onactionbutton_pressed to create my event when customer button is pressed, right?
Could anyone please guide me how to solve this issue?
Thanks and best reagrds
AndreasHi,
Here are the steps to add the button, I wrote it in other thread. In my case for PO is not displayed, try to follow the steps and if you are able to show the button tell me how please.
Add custom button in PO
And yes ,you need to create an enhancement point in the view CNR_VIEW of the component FPM_OIF_COMPONENT, you need to create a post-exit in the method BUTTON_PRESSED, here you have a sample code:
DATA: lv_id TYPE string,
lv_event_id TYPE fpm_event_id.
DATA: lo_nd_oif_application TYPE REF TO if_wd_context_node,
lo_nd_variant TYPE REF TO if_wd_context_node,
lo_nd_toolbar TYPE REF TO if_wd_context_node,
lo_nd_button TYPE REF TO if_wd_context_node,
lo_el_button TYPE REF TO if_wd_context_element,
lo_nd_other_functions TYPE REF TO if_wd_context_node.
DATA: lv_substring TYPE string,
lv_substring_i TYPE i,
lv_node_name TYPE string,
lv_position TYPE string,
lv_length TYPE i,
lv_seq TYPE i.
DATA:lt_keys TYPE STANDARD TABLE OF string,
lv_key LIKE LINE OF lt_keys.
TYPES:BEGIN OF y_parameters,
name TYPE string,
value TYPE string,
END OF y_parameters.
DATA: lt_parameters TYPE STANDARD TABLE OF y_parameters,
ls_parameter LIKE LINE OF lt_parameters.
DATA: lv_boid TYPE bbp_guid,
lv_botype TYPE string,
lv_objkey TYPE swo_typeid,
lv_objtype TYPE swo_objtyp,
lv_object_id TYPE crmt_object_id_db,
lv_process_type TYPE crmt_process_type_db,
lv_object_type TYPE crmt_subobject_category_db,
lv_rfc TYPE zgrs_co_logsys-rfc,
DATA: lo_fpm TYPE REF TO if_fpm.
lo_fpm = cl_fpm_factory=>get_instance( ).
lo_fpm->raise_event_by_id( lv_event_id ).
lt_keys = lo_fpm->mo_app_parameter->get_keys( ).
LOOP AT lt_keys INTO lv_key.
ls_parameter-name = lv_key.
lo_fpm->mo_app_parameter->get_value(
EXPORTING iv_key = lv_key
IMPORTING ev_value = ls_parameter-value ).
INSERT ls_parameter INTO TABLE lt_parameters.
ENDLOOP.
lv_id = wdevent->get_string( 'ID' ).
lo_nd_oif_application = wd_context->get_child_node( name = wd_this->wdctx_oif_application ).
lo_nd_variant = lo_nd_oif_application->get_child_node( name = wd_this->wdctx_variant ).
lo_nd_toolbar = lo_nd_variant->get_child_node( name = wd_this->wdctx_toolbar ).
lo_nd_other_functions = lo_nd_toolbar->get_child_node( name = wd_this->wdctx_other_functions ).
lv_substring = lv_id.
lv_length = STRLEN( lv_id ).
lv_seq = lv_length - 3.
IF lv_id+lv_seq = '_CP'.
lv_substring = lv_substring(lv_seq).
lv_id = lv_substring.
ENDIF.
WHILE lv_substring CS '_'.
lv_position = sy-fdpos + 1.
lv_substring = lv_substring+lv_position.
ENDWHILE.
IF lv_substring CO '1234567890'.
lv_substring_i = lv_substring.
ENDIF.
* Item level action;
IF lv_id CS '_item'.
* Or header level action;
ELSE.
IF lv_id CA '0123456789'.
lv_position = sy-fdpos - 1.
lv_node_name = lv_id(lv_position).
IF lv_id CS 'OTHER_FUNCTIONS'.
lo_nd_button = lo_nd_other_functions->get_child_node( name = wd_this->wdctx_button ).
lo_nd_button->set_lead_selection_index( index = lv_substring_i ).
lo_el_button = lo_nd_button->get_element( ).
TRY.
lo_el_button->get_attribute(
EXPORTING
name = `EVENT_ID`
IMPORTING
value = lv_event_id ).
CATCH cx_wd_context.
ENDTRY.
READ TABLE lt_parameters INTO ls_parameter WITH KEY name = 'SAPSRM_BOTYPE'.
lv_botype = ls_parameter-value.
READ TABLE lt_parameters INTO ls_parameter WITH KEY name = 'SAPSRM_BOID'.
lv_boid = ls_parameter-value.
* Obtain the object_id;
SELECT SINGLE object_id INTO lv_object_id
FROM crmd_orderadm_h
WHERE guid EQ lv_boid.
* If not Z button, exits;
IF lv_event_id(1) NE 'Z'. EXIT. ENDIF.
* Actions;
CASE lv_event_id.
WHEN 'ZBUTTON'.
WHEN 'ZBUTTON2'.
ENDCASE.
ENDIF.
ENDIF.
ENDIF. -
How to add custom field to ical
Hi
I run a small business from my mac pro and my iphone. I would like to get a good workflow but it seems I am missing a few bits of information.
First I would like to add custom fields to ical so that I can gather all the information I need in one spot. For example, I create a meeting with new client Tim Smith on Friday so I want to enter his name and contact info into ical because I need his address and phone number on the event so I can reference it.
Then I would like to find a way to automatically create a contact card based on that information. If I can find an apple script that reads the fields in Ical and creates new contacts based on new events that I created.
Then I would like to automate extracting the email addresses to send out preformed group mailers for people who were in my calendar that day ie "Thanks for meeting with me, I think we got a lot accomplished and hope to see you at the next meeting." etc etc
Then also automate reports based off of my ical events such as "Report for how many times I had a meeting in the Blue Room this week" or "How many times did I meet with Timothy Smith" this year
I have tried automator and it doesn't seem strong enough to do this so I am thinking AppleScript but I am not very good at it. Anyone have any ideas on any of these issues?Tried the iCal forum and support
www.apple.com/support/ical
Tried Lion Community?
you have notebook and tower?
www.apple.com/support/macbookpro -
Where are the facilities to add custom date ranges, indexable by Spotlight
The Finder is meant to be just that... A way to find files right?
Well lets look at a simple business scenario. I get a bill from a supplier, I pay the bill, I receive an invoice, I process the invoice through my accounting package. Now with paperless offices these days bills and invoices come electronically or are scanned electronically.
While iTunes mp3s are able to be categorised by custom date ranges such as when the album was released why cant I find files based on custom date ranges such as "Date Paid", "Date Due", "Date Received". I cant find any solution for this anywhere. There are many file tagging systems out there such as Yep and Tags which are meant to be using OpenMeta... But all they enable you to do is tag them by commonly used key words such as "Invoice" or "Bill". What if I want a custom field to put an Invoice number so that I can track it down using spotlight?
This would enable me to completely manage my office files in one clean sweep. I cant be the only one out there would would find this solution useful... Is it the case that spotlight/finder is designed in such a way that it is not possible to add custom date meta data?{quote}
What if I want a custom field to put an Invoice number so that I can track it down using spotlight?
Why wouldn't you just type in the Invoice number and have spotlight find it for you? Spotlight indexes all of the text in most type of documents. In my case, I use some Excel spreadsheets, with unique invoice numbers. I type in the number and Spotlight shows the document.
I can also type in the clients name and be shown a list of all the documents, emails, etc to or from or that mention that client. Included in the list of documents is every invoice that has that clients name in the text of the document.
If I'm looking for a particular invoice and know the clients name I type it and also something about the particular invoice that I'm looking for (like "John Smith video card") and that invoice shows up in the search.
If I'm looking for an invoice for a certain person during a certain year I just type: John Smith 2010 and those documents show up in the list at the top. -
How to add custom field in Message type MBGMCR IDOC
Hello,
Could you please help me on below requirement.
There is standard IDOC type MBGMCR.In this IDOC type there is one segment with the name E1BP2017_GM_ITEM_CREATE.
How can we add custom filed in this segment E1BP2017_GM_ITEM_CREATE?
I tried to use Append structure.But systme is not allowing us to create custom filed in this..
It is a outbound.I created custom program to send this IDOC to other system .
Could you please help me out on this.
If you need any further details pls let me know.Thank you in advacne.
RegardsHello Rohit,
Please create a enchancement for component /SAPSRM/WDC_UI_DO_SHIPTO.
Add new input field and label in view V_DODC_SHIPTO.
Bind the input field value with field ZZfield from structure /SAPSRM/WDC_UI_DO_SHIPTO in the context node SHIP_TO .
Regards,
Neelima -
Dear All,
S_ALR_87012178 u2013 Customer Open Item Analysis (Overdue)
Here customer name (text) is not available. How can we get the name here.
When I creating a variant, that filed is not avilable for selection.
Please update me with right solution.
Regards
parthaIt WILL NOT show.
In variant, those fields are nothing but the field from your standard report.
Still if you want to add field with name, you need to enhance. You need to talk to your ABAPer.
I do not suggest changing any standard screen, unless it is business critical.
Regards,
Ravi -
Hi,
Customer code is appearing in MB51 report. I want to add the customer name in the MB51. Can I?
Thanks,
Samir BhattHi,
Not without modifying the code. It is not a standard field in the display.
But it would be a very small Mod.
Steve B -
Add custom column in default list view in sharepoint
Hello,
How to add custom column in default list view in SharePoint 2013? In list view we have view fields section. But its not allowing to add any static text. I want to add one button/textin view fields. How to add that?
<View Name="{C7499466-A865-4742-8511-5536D2521D1C}" MobileView="TRUE" Type="HTML" Hidden="TRUE" DisplayName="All Documents" Url="/SectionManagement/SitePages/Untitled_1.aspx" Level="1"
BaseViewID="1" ContentTypeID="0x" ImageUrl="/_layouts/15/images/dlicon.png?rev=23" ><Query/>
<ViewFields>
<FieldRef Name="LinkFilename"/>
<FieldRef Name="LinkFilenameNoMenu"/>
</ViewFields>Hi,
to add a field to a view use this
<ViewFields>
<FieldRef Name="LinkFilename"/>
<FieldRef Name="LinkFilenameNoMenu"/>
<FieldRef Name=[InternalNameOfCustomField]/>
</ViewFields>
Maybe you are looking for
-
Hello all, I want to complete 57f4 chalan which have crossed due date. For that m using SE11, and object J_1iexchdr. When I select icon CONTENTS the next screen which shud be for feeding DOCYR & EXNUM is not appearing. Instead of that another screen
-
What do I need to do to set IE11 to show a specific site in compatibility view?
We have a legacy site which needs to be in the compatibility view settings in IE11 on our Win 7 workstation (and Win 2012 RDS). On a test machine in a test OU, I have set a new IE group policy which only contains one setting, which is: Computer Conf
-
Whats the difference in install types as far as HDD space? (LEOPARD)
Does an "Upgrade" take up much more space on the HD than an "Archive and Install"? Does any body know how many GBs each one takes? And if I was to do a total format then "install" how much less space would that take? Thanks for your information guys!
-
Router not picking internet up
I have reconfigured my router and reset its old settings I had on it. The wierd thing is that I have a few problems: 1. I dont have the installation CD for my router. And when I try to log into it with the default IP adress, it wont let me. I would l
-
Seriously, I'm ready to throw something expensive against the wall, this is So. Freaking. Frustrating!