Add Document ID to Invoices_all Table

Hello,
I would like to ask if there's a way i can add the document ID of attached documents as an extra attribute field to the Invoices_All table while creating invoices through quick invoices.
Thanks in anticipation.

If you want to update/track document ID for the Invoices, create a form personalizaiton on Invoices window and define a DFF so that document Id can be populated
Thanks,
Krishna

Similar Messages

  • How to add the rows formatted as table headings, Tables headings are repeated when a table spans more than one page.

    Hi all,
    i am facing problem while generating Test Result word document after successful execution of TestStand.
    The Problem is :
    i want to add rows Formatted as table headings, table headings are repeated when a table spans more than one page(marked as Red).
    Example:
    Page  No. 1
    |     Test case Number  |  Test Step number      |
    |      100                         |            100                   |
    Page  No. 2
    |     Test case Number  |  Test Step number      |
    |      200                         |            300                   |
    Test Result word document should generate with Table headings(marked as Red) in every pages of the document, but i am not getting as per above example.
    Please through light on this.
    Regards,
    Susa.

    Hi Santiago,
    Thank you very much for your valuable reply.
    i want to generate MS-word report for TestStand after successful testing using MS-word2000.
    Test report contains Actual values, Expected values and Pass/Fail status.
    In my program i have customized all  fields i can able to generate test report which contains Verification engineer name , test mode, test date, start time, end time Actual values, Expected values and Pass/Fail status.etc....
    To put all values of test case number, Test step number, Actual values, Expected values and Pass/Fail status in to table for each time, i will
    insert a row into table every time values arrives, once the table exceedes its page size it moves to the next page, next page should start with table row header  but it start with  values of above said parameters.
    so i'm not able to repeat table row header for each page.
    Please find the attached file for your reference.
    Attched file expected.doc  :   This file contains what i wanted to generate MS-word report. Here table row header "Test Case Number and Test Step Number " is repeated in second page.
    Attached file Actual output from source code.doc   :  This report generated from the source code. Here table row header "Test Case Number and Test Step Number" is not repeated in second page.
    Do you know any property to set "repeat as header row at the top of each page" using MS-word ActiveX in CVI/Labwindows.
    i think this information is sufficient for you,
    Still if you need some information please ask me.
    Thanks
    Susa.
    Attachments:
    Actual output from source code.doc ‏25 KB
    expected.doc ‏26 KB

  • How can I add an adornment to a table model?

    Hi
    - Is it possible to add an adornment to a table model?
    -  If yes how can I do that? Interface? Sample?
    Thanks for any hint
    Hans

    Hi,
    How can I add an attribute to a node of a DOM
    Document?
    I want to add attribute Maximum="6" for all Grade node
    as <Grade Maximum="6">.
    Grade is a third level node in my document.
    ThanksGet the father of "Grade" elements as an element. Then get all elements named "Grade", and for each one set attribute "Maximum" with value "6". If you read api documentation you will know which methods to use.
    But for helping you in getting the "Grade" parent.
    1) get the root element of the Dom Doc
    2)get the father of the "Grade" father: getElementsBytagName("his name") -> it will return a Node List get the first element casting as Element if there's only one, or elese if not case
    3)the same method in 2 get the "Grade" father
    4)getElementByTagName("Grade") over the "Grade" father -> for each "grade" element on nodelist do whatever you need
    i hope u understood...

  • I want add Document type and Document text std report S_ALR_87012357

    Hi Gurus
    I want add Document type(BLART) and Document text(BKTXT)  for std report S_ALR_87012357  .how can i pull these fields .do i need to change the code .
    Please help me
    Thanks & Regards
    Sandya
    Edited by: sandya rani on Feb 3, 2010 1:36 PM

    Hi
    Suggest you to ask the help of the ABAPER & Debug the report  S_ALR_87012357
    Please also check field HWBAS(Tax Base Amount in Local Currency)  in Table BSET  (Tax Data Document Segment)
    Regards
    Praveen P C
    Edited by: Praveen Chirakkel on Apr 20, 2011 6:13 AM

  • Adding Pages Document which includes a table to Iweb.

    Hello All,
    Im creating a website on Iweb and would like to add a "pages document" which includes a table to it. Doesnt seem to be all that easy?
    Would appreciate any help.
    Thank you.

    Don't confuse the Operating System (yosemite) with the version of Pages.
    It sounds like you have Pages 5.5.3.
    It only works in Pages '09, like 100+ other features only work in Pages '09 and previous.
    Peter

  • Date insertion from large XML document (clob) into relation table very slow

    Hi Everybody!
    I'm working with Oracle 9.2.0.5 on Microsoft Windows Server 2003 Enterprise Edition.
    The server (a test server) is a Pentium 4 2.8 GHz, 1GB of RAM.
    I use a procedure called PARITOP_TRAITERXMLRESULTMASSE to insert the data contained in the pXMLDOC clob parameter in the table pTABLENAME. (You can see the format of the XML document below). The first step on this procedure is to verify that the XML document is not empty. If not, the procedure needs to add a node in the document, in every <ROW> tag. This added node is named “RST_ID”. It’s the foreign key of each record. I can retrieve the value of each <RST_ID> node in an other table in which the data has been previously added (by the calling procedure). When each of the <ROW> elements has been treated, the PARITOP_INSERTXML procedure is called. This procedure uses DBMS_XMLSAVE.INSERTXML to insert the data contained in the XML document in the specified table.
    (Below, you can see the code of my procedures.)
    With this information, can you tell me why this treatment is very very very slow with a large XML document and how I can improve it?
    Thank you for your help!
    Anne-Marie
    CREATE OR REPLACE PROCEDURE "PARITOP_TRAITERXMLRESULTMASSE" (
    pPRC_ID IN PARITOP_PARC.PRC_ID%TYPE,
    pRST_MONDE IN PARITOP_RESULTAT.RST_MONDE%TYPE,
    pXMLDOC IN CLOB,
    pTABLENAME IN VARCHAR2)
    AS
    Objectif :Insérer le contenu du XML passé en paramètre (pXMLDOC) à la table passée en paramètre (pTABLENAME)
    La table passée en paramètre doit être une table ayant comme clé étrangère le champs "RST_ID" .
    (Le noeud RST_ID est donc ajouté à tous les document XML. Ce rst_id est
    déterminé à partir de la table PARITOP_RESULTAT grâce à pPRC_ID et
    pRstMonde fournis en paramètre)
    result_doc CLOB;
    XMLDOMDOC XDB.DBMS_XMLDOM.DOMDOCUMENT;
    NODE_ROWSET DBMS_XMLDOM.DOMNODE;
    NODE_ROW DBMS_XMLDOM.DOMNODE;
    vUE_ID PARITOP_RESULTAT.UE_ID%TYPE;
    vRST_ID PARITOP_RESULTAT.RST_ID%TYPE;
    nodeList DBMS_XMLDOM.DOMNODELIST;
    BEGIN
    BEGIN
    vUE_ID := 0;
    vRST_ID := 0;
    XMLDOMDOC := DBMS_XMLDOM.NEWDOMDOCUMENT(pXMLDOC);
    IF NOT GESTXML_PKG.FN_PARITOP_DOCUMENT_IS_NULL(XMLDOMDOC) THEN
    NODE_ROWSET := DBMS_XMLDOM.item(DBMS_XMLDOM.GETCHILDNODES (DBMS_XMLDOM.MAKENODE(XMLDOMDOC)),0);
    for i in 0..dbms_xmldom.getLength(DBMS_XMLDOM.getchildnodes(NODE_ROWSET))-1 loop
    NODE_ROW := DBMS_XMLDOM.ITEM(DBMS_XMLDOM.GETCHILDNODES(NODE_ROWSET), i) ;
    nodeList := DBMS_XMLDOM.GETELEMENTSBYTAGNAME(DBMS_XMLDOM.makeelement(NODE_ROW) , 'UE_ID');
    IF vUE_ID <> DBMS_XMLDOM.GETNODEVALUE(DBMS_XMLDOM.GETFIRSTCHILD(DBMS_XMLDOM.ITEM(nodeList, 0))) THEN
    vUE_ID := DBMS_XMLDOM.GETNODEVALUE(DBMS_XMLDOM.GETFIRSTCHILD(DBMS_XMLDOM.ITEM(nodeList, 0)));
    --on ramasse le rst_id
    SELECT RST_ID INTO vRST_ID
    FROM PARITOP_RESULTAT RST
    WHERE RST.PRC_ID = pPRC_ID
    AND RST.UE_ID = vUE_ID
    AND RST.RST_MONDE = pRST_MONDE
    AND RST_A_SUPPRIMER = 0;
    END IF;
    GESTXML_PKG.PARITOP_ADDNODETOROW(XMLDOMDOC, NODE_ROW, 'RST_ID', vRST_ID);
    end loop;
    RESULT_DOC := ' '; --à garder, pour ne pas que ca fasse d'erreur lors du WriteToClob.
    dbms_xmldom.writeToClob(DBMS_XMLDOM.MAKENODE(XMLDOMDOC), RESULT_DOC);
    --Insertion du document XML dans la table "tableName"
    GESTXML_PKG.PARITOP_INSERTXML(RESULT_DOC, pTABLENAME);
    DBMS_XMLDOM.FREEDOCUMENT( XMLDOMDOC);
    end if;
    EXCEPTION
    […exception treatement…]
    END;
    END;
    The format of a XML clob is :
    <ROWSET>
    <ROW>
    <PRC_ID>193</PRC_ID>
    <UE_ID>8781</UE_ID>
    <VEN_ID>6223</VEN_ID>
    <RST_MONDE>0</RST_MONDE>
    <CMP_SELMAN>0</CMP_SELMAN>
    <CMP_INDICESELECTION>92.307692307692307</CMP_INDICESELECTION>
    <CMP_PVRES>94900</CMP_PVRES>
    <CMP_PVAJUSTE>72678.017699115066</CMP_PVAJUSTE>
    <CMP_PVAJUSTEMIN>72678.017699115095</CMP_PVAJUSTEMIN>
    <CMP_PVAJUSTEMAX>72678.017699115037</CMP_PVAJUSTEMAX>
    <CMP_PV>148000</CMP_PV>
    <CMP_VALROLE>129400</CMP_VALROLE>
    <CMP_PVRESECART>4790</CMP_PVRESECART>
    <CMP_PVRHAB>101778.01769911509</CMP_PVRHAB>
    <CMP_UTILISE>1</CMP_UTILISE>
    <CMP_TVM>1</CMP_TVM>
    <CMP_PVA>148000</CMP_PVA>
    </ROW>
    <ROW>
    <PRC_ID>193</PRC_ID>
    <UE_ID>8781</UE_ID>
    <VEN_ID>6235</VEN_ID>
    <RST_MONDE>0</RST_MONDE>
    <CMP_SELMAN>0</CMP_SELMAN>
    <CMP_INDICESELECTION>76.92307692307692</CMP_INDICESELECTION>
    <CMP_PVRES>117800</CMP_PVRES>
    <CMP_PVAJUSTE>118080</CMP_PVAJUSTE>
    <CMP_PVAJUSTEMIN>118080</CMP_PVAJUSTEMIN>
    <CMP_PVAJUSTEMAX>118080</CMP_PVAJUSTEMAX>
    <CMP_PV>172000</CMP_PV>
    <CMP_VALROLE>134800</CMP_VALROLE>
    <CMP_PVRESECART>0</CMP_PVRESECART>
    <CMP_PVRHAB>147180</CMP_PVRHAB>
    <CMP_UTILISE>1</CMP_UTILISE>
    <CMP_TVM>1</CMP_TVM>
    <CMP_PVA>172000</CMP_PVA>
    </ROW>
    </ROWSET>
    PARITOP_COMPARABLE TABLE :
    RST_ID NUMBER(10) NOT NULL,
    VEN_ID NUMBER(10) NOT NULL,
    CMP_SELMAN NUMBER(1) NOT NULL,
    CMP_UTILISE NUMBER(1) NOT NULL,
    CMP_INDICESELECTION FLOAT(53) NOT NULL,
    CMP_PVRES FLOAT(53) NULL,
    CMP_PVAJUSTE FLOAT(53) NULL,
    CMP_PVRHAB FLOAT(53) NULL,
    CMP_TVM FLOAT(53) NULL
    ROCEDURE PARITOP_INSERTXML (xmlDoc IN clob, tableName IN VARCHAR2)
    AS
    insCtx DBMS_XMLSave.ctxType;
    rowss number;
    BEGIN
    --permet d'insérer les champs du XML dans la table passée en paramètre.
    --il suffit que les champs XML aient le même nom que les champs de la table
    BEGIN
    insCtx := DBMS_XMLSave.newContext(tableName); -- get context handle
    DBMS_XMLSAVE.SETDATEFORMAT( insCtx, 'yyyy-MM-dd HH:mm:ss');--attention, case sensitive
    DBMS_XMLSAVE.setIgnoreCase(insCtx, 1);
    rowss := DBMS_XMLSAVE.INSERTXML(insCtx , xmlDoc);
    DBMS_XMLSave.closeContext(insCtx);
    EXCEPTION
    […]
    END;
    END;
    PROCEDURE PARITOP_ADDNODETOROW (
    XMLDOMDOC DBMS_XMLDOM.DOMDOCUMENT,
    NODE_ROW dbms_xmldom.DOMNode,
    NOM_NOEUD VARCHAR2,
    VALEUR_NOEUD VARCHAR2)
    AS
    --PERMET D'AJOUTER UN NOEUD AVEC 1 SEULE VALEUR DANS une ROW D'UN XML.
    --UTILE SURTOUT POUR LES CLÉS ÉTRANGÈRES
    domElemAInserer DBMS_XMLDOM.DOMELEMENT;
    NODE dbms_xmldom.DOMNode;
    NODE_TMP dbms_xmldom.DOMNode;
    BEGIN
    domElemAInserer := DBMS_XMLDOM.createElement(XMLDOMDOC, NOM_NOEUD) ;
    NODE := DBMS_XMLDOM.MAKENODE(domElemAInserer); --cast
    NODE := DBMS_XMLDOM.APPENDCHILD(NODE_ROW,NODE);
    NODE_TMP := DBMS_XMLDOM.MAKENODE(DBMS_XMLDOM.CREATETEXTNODE(XMLDOMDOC, VALEUR_NOEUD ) );
    NODE := DBMS_XMLDOM.APPENDCHILD(NODE,NODE_TMP );
    END;

    Hi Everybody!
    I'm working with Oracle 9.2.0.5 on Microsoft Windows Server 2003 Enterprise Edition.
    The server (a test server) is a Pentium 4 2.8 GHz, 1GB of RAM.
    I use a procedure called PARITOP_TRAITERXMLRESULTMASSE to insert the data contained in the pXMLDOC clob parameter in the table pTABLENAME. (You can see the format of the XML document below). The first step on this procedure is to verify that the XML document is not empty. If not, the procedure needs to add a node in the document, in every <ROW> tag. This added node is named “RST_ID”. It’s the foreign key of each record. I can retrieve the value of each <RST_ID> node in an other table in which the data has been previously added (by the calling procedure). When each of the <ROW> elements has been treated, the PARITOP_INSERTXML procedure is called. This procedure uses DBMS_XMLSAVE.INSERTXML to insert the data contained in the XML document in the specified table.
    (Below, you can see the code of my procedures.)
    With this information, can you tell me why this treatment is very very very slow with a large XML document and how I can improve it?
    Thank you for your help!
    Anne-Marie
    CREATE OR REPLACE PROCEDURE "PARITOP_TRAITERXMLRESULTMASSE" (
    pPRC_ID IN PARITOP_PARC.PRC_ID%TYPE,
    pRST_MONDE IN PARITOP_RESULTAT.RST_MONDE%TYPE,
    pXMLDOC IN CLOB,
    pTABLENAME IN VARCHAR2)
    AS
    Objectif :Insérer le contenu du XML passé en paramètre (pXMLDOC) à la table passée en paramètre (pTABLENAME)
    La table passée en paramètre doit être une table ayant comme clé étrangère le champs "RST_ID" .
    (Le noeud RST_ID est donc ajouté à tous les document XML. Ce rst_id est
    déterminé à partir de la table PARITOP_RESULTAT grâce à pPRC_ID et
    pRstMonde fournis en paramètre)
    result_doc CLOB;
    XMLDOMDOC XDB.DBMS_XMLDOM.DOMDOCUMENT;
    NODE_ROWSET DBMS_XMLDOM.DOMNODE;
    NODE_ROW DBMS_XMLDOM.DOMNODE;
    vUE_ID PARITOP_RESULTAT.UE_ID%TYPE;
    vRST_ID PARITOP_RESULTAT.RST_ID%TYPE;
    nodeList DBMS_XMLDOM.DOMNODELIST;
    BEGIN
    BEGIN
    vUE_ID := 0;
    vRST_ID := 0;
    XMLDOMDOC := DBMS_XMLDOM.NEWDOMDOCUMENT(pXMLDOC);
    IF NOT GESTXML_PKG.FN_PARITOP_DOCUMENT_IS_NULL(XMLDOMDOC) THEN
    NODE_ROWSET := DBMS_XMLDOM.item(DBMS_XMLDOM.GETCHILDNODES (DBMS_XMLDOM.MAKENODE(XMLDOMDOC)),0);
    for i in 0..dbms_xmldom.getLength(DBMS_XMLDOM.getchildnodes(NODE_ROWSET))-1 loop
    NODE_ROW := DBMS_XMLDOM.ITEM(DBMS_XMLDOM.GETCHILDNODES(NODE_ROWSET), i) ;
    nodeList := DBMS_XMLDOM.GETELEMENTSBYTAGNAME(DBMS_XMLDOM.makeelement(NODE_ROW) , 'UE_ID');
    IF vUE_ID <> DBMS_XMLDOM.GETNODEVALUE(DBMS_XMLDOM.GETFIRSTCHILD(DBMS_XMLDOM.ITEM(nodeList, 0))) THEN
    vUE_ID := DBMS_XMLDOM.GETNODEVALUE(DBMS_XMLDOM.GETFIRSTCHILD(DBMS_XMLDOM.ITEM(nodeList, 0)));
    --on ramasse le rst_id
    SELECT RST_ID INTO vRST_ID
    FROM PARITOP_RESULTAT RST
    WHERE RST.PRC_ID = pPRC_ID
    AND RST.UE_ID = vUE_ID
    AND RST.RST_MONDE = pRST_MONDE
    AND RST_A_SUPPRIMER = 0;
    END IF;
    GESTXML_PKG.PARITOP_ADDNODETOROW(XMLDOMDOC, NODE_ROW, 'RST_ID', vRST_ID);
    end loop;
    RESULT_DOC := ' '; --à garder, pour ne pas que ca fasse d'erreur lors du WriteToClob.
    dbms_xmldom.writeToClob(DBMS_XMLDOM.MAKENODE(XMLDOMDOC), RESULT_DOC);
    --Insertion du document XML dans la table "tableName"
    GESTXML_PKG.PARITOP_INSERTXML(RESULT_DOC, pTABLENAME);
    DBMS_XMLDOM.FREEDOCUMENT( XMLDOMDOC);
    end if;
    EXCEPTION
    […exception treatement…]
    END;
    END;
    The format of a XML clob is :
    <ROWSET>
    <ROW>
    <PRC_ID>193</PRC_ID>
    <UE_ID>8781</UE_ID>
    <VEN_ID>6223</VEN_ID>
    <RST_MONDE>0</RST_MONDE>
    <CMP_SELMAN>0</CMP_SELMAN>
    <CMP_INDICESELECTION>92.307692307692307</CMP_INDICESELECTION>
    <CMP_PVRES>94900</CMP_PVRES>
    <CMP_PVAJUSTE>72678.017699115066</CMP_PVAJUSTE>
    <CMP_PVAJUSTEMIN>72678.017699115095</CMP_PVAJUSTEMIN>
    <CMP_PVAJUSTEMAX>72678.017699115037</CMP_PVAJUSTEMAX>
    <CMP_PV>148000</CMP_PV>
    <CMP_VALROLE>129400</CMP_VALROLE>
    <CMP_PVRESECART>4790</CMP_PVRESECART>
    <CMP_PVRHAB>101778.01769911509</CMP_PVRHAB>
    <CMP_UTILISE>1</CMP_UTILISE>
    <CMP_TVM>1</CMP_TVM>
    <CMP_PVA>148000</CMP_PVA>
    </ROW>
    <ROW>
    <PRC_ID>193</PRC_ID>
    <UE_ID>8781</UE_ID>
    <VEN_ID>6235</VEN_ID>
    <RST_MONDE>0</RST_MONDE>
    <CMP_SELMAN>0</CMP_SELMAN>
    <CMP_INDICESELECTION>76.92307692307692</CMP_INDICESELECTION>
    <CMP_PVRES>117800</CMP_PVRES>
    <CMP_PVAJUSTE>118080</CMP_PVAJUSTE>
    <CMP_PVAJUSTEMIN>118080</CMP_PVAJUSTEMIN>
    <CMP_PVAJUSTEMAX>118080</CMP_PVAJUSTEMAX>
    <CMP_PV>172000</CMP_PV>
    <CMP_VALROLE>134800</CMP_VALROLE>
    <CMP_PVRESECART>0</CMP_PVRESECART>
    <CMP_PVRHAB>147180</CMP_PVRHAB>
    <CMP_UTILISE>1</CMP_UTILISE>
    <CMP_TVM>1</CMP_TVM>
    <CMP_PVA>172000</CMP_PVA>
    </ROW>
    </ROWSET>
    PARITOP_COMPARABLE TABLE :
    RST_ID NUMBER(10) NOT NULL,
    VEN_ID NUMBER(10) NOT NULL,
    CMP_SELMAN NUMBER(1) NOT NULL,
    CMP_UTILISE NUMBER(1) NOT NULL,
    CMP_INDICESELECTION FLOAT(53) NOT NULL,
    CMP_PVRES FLOAT(53) NULL,
    CMP_PVAJUSTE FLOAT(53) NULL,
    CMP_PVRHAB FLOAT(53) NULL,
    CMP_TVM FLOAT(53) NULL
    ROCEDURE PARITOP_INSERTXML (xmlDoc IN clob, tableName IN VARCHAR2)
    AS
    insCtx DBMS_XMLSave.ctxType;
    rowss number;
    BEGIN
    --permet d'insérer les champs du XML dans la table passée en paramètre.
    --il suffit que les champs XML aient le même nom que les champs de la table
    BEGIN
    insCtx := DBMS_XMLSave.newContext(tableName); -- get context handle
    DBMS_XMLSAVE.SETDATEFORMAT( insCtx, 'yyyy-MM-dd HH:mm:ss');--attention, case sensitive
    DBMS_XMLSAVE.setIgnoreCase(insCtx, 1);
    rowss := DBMS_XMLSAVE.INSERTXML(insCtx , xmlDoc);
    DBMS_XMLSave.closeContext(insCtx);
    EXCEPTION
    […]
    END;
    END;
    PROCEDURE PARITOP_ADDNODETOROW (
    XMLDOMDOC DBMS_XMLDOM.DOMDOCUMENT,
    NODE_ROW dbms_xmldom.DOMNode,
    NOM_NOEUD VARCHAR2,
    VALEUR_NOEUD VARCHAR2)
    AS
    --PERMET D'AJOUTER UN NOEUD AVEC 1 SEULE VALEUR DANS une ROW D'UN XML.
    --UTILE SURTOUT POUR LES CLÉS ÉTRANGÈRES
    domElemAInserer DBMS_XMLDOM.DOMELEMENT;
    NODE dbms_xmldom.DOMNode;
    NODE_TMP dbms_xmldom.DOMNode;
    BEGIN
    domElemAInserer := DBMS_XMLDOM.createElement(XMLDOMDOC, NOM_NOEUD) ;
    NODE := DBMS_XMLDOM.MAKENODE(domElemAInserer); --cast
    NODE := DBMS_XMLDOM.APPENDCHILD(NODE_ROW,NODE);
    NODE_TMP := DBMS_XMLDOM.MAKENODE(DBMS_XMLDOM.CREATETEXTNODE(XMLDOMDOC, VALEUR_NOEUD ) );
    NODE := DBMS_XMLDOM.APPENDCHILD(NODE,NODE_TMP );
    END;

  • To add a filter in a table in wd java

    Hi All,
    I have a functionality to add a filter in a table. I have read a few posts on this but unable to understand it.
    Please help me out.
    Thanks,
    Shubham Gupta

    Hi,
    Please look at this [document for table filter and sorting functionality|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0cf0997-2e08-2d10-b08e-964a2c04c47a?QuickLink=index&overridelayout=true]
    Hope this is help full for you,
    Regards
    Vijay

  • Move "Add Document" to top

    Hello,
    I need to move "Add Document" to top of form library but cannot use SharePoint Designer nor any code. I'd like to use context editor but need to know exactly what script to use. Thanks in advance for any help.

    Hi,
    According to your post, my understanding is that you wanted to move the “Add Document” to top.
    You can add a content editor web part in the library, then use the following code snippet to achieve it.
    <style type="text/css">
    TABLE.s4-wpTopTable {
    POSITION: relative
    TD > DIV > TABLE {
    MARGIN-TOP: 25px
    TD.ms-addnew {
    POSITION: absolute; LEFT: 2px; TOP: 2px
    }</style>
    Thanks & Regards,
    Jason 
    Jason Guo
    TechNet Community Support

  • How to add a new columns in table contorl in standard screen.

    Hi All,
    I am working on a enhancement for transaction VA01. I have to add few column for tab Additional Data B. In this tab  column are displayed in table control. Now i have to add two more column in table control. Could you please help me to find out the exit and the way to populate the new columns.
    Thanks
    Piyush Mathur

    Hi Piyush,
              That table control might have been created using an internal table i.e declared in the exit. Add two more fields which you want to that internal table. And come to the layout and create table control once again using that internal table.
    Reward if helpful.
    Regards,
    Ramana

  • Add a new record to table control

    Dear all,
    How to add a new  blank record to a table control?
    Following code is not working for adding  a new blank record to a table control
    MODULE USER_COMMAND_0100 INPUT.
        SAVE_OK = OK_CODE.
        CLEAR OK_CODE.
        CASE SAVE_OK.
          WHEN 'EXIT'.
            LEAVE PROGRAM.
          WHEN 'APND'.             " A button "Add" to add a new record to table control
            REFRESH IT_KNA1.
            CLEAR IT_KNA1.
            APPEND IT_KNA1.
        ENDCASE.
    ENDMODULE.        
    Thanks you

    Hope you have done all table control specific coding
    refer this example program
    http://help.sap.com/saphelp_nw04/helpdata/en/9f/dbac5e35c111d1829f0000e829fbfe/content.htm

  • Add change Icon in the Table Control tool bar.

    Hi Abapers,
    I need to add "change" icon in the table control. I added it but when I click on it is not working.
    My requirement is that when I run my custom report, all the fields should be shown is in display mode. Then when I click on the "change" icon, all fields should be enabled for change.
    I have already referred to the standard progs BCALV_* but it does not have the "change" icon.
    plz give me any reference prg or sample code.
    Thanks
    Nani.

    Hi Nani,
    Track the function code of change icon in user command. if it is clicked then put a flag eq X.
    check that flag in PBO, if it is eq X then screen-input = 1 or vice versa.
    try this code:
    in PBO:
    LOOP AT SCREEN
    IF WS_EDIT = 'X'
    SCREEN-INPUT = 1
    ELSE
    SCREEN-INPUT = 0
    ENDIF
    MODIFY SCREEN
    ENDLOOP
    Hope it will work fine
    Regards
    Krishnendu

  • Additional field in the 'Add document' subscreen while creating a Solar doc

    Hi Forum members,
    I need to add additional fields in the 'Add Document' sub-screen that appears when I create documents in SOLAR01.
    The subscreen currently has 'Title', 'Documentation Type', 'Status' and 5 radio buttons for 'Object type'.
    Please advise.

    Hi,
    I doubt if we have any option to add additional fields in that screen.
    What additional fields are you planning to add?

  • Check 2 tables(Table A and Table B) and figure out new columns present in Table A and add these new columns to Table B

    How to check 2 tables(Table A and Table B) and figure out new columns present in Table A and add these new columns to Table b.
    DDL-
    Create table A
    ( A INT,
    B INT,C VARCHAR(2)
    Create table B
    A INT,
    B INT
    Any advice on the best approach or method to achieve this.
    I understand that I need to check the schema of the columns and then do a match between 2 tables and find new columns and then alter my target table
    Mudassar

    Can you try this..
    CREATE TABLE A ( A INT, B INT, C VARCHAR(2) )
    CREATE TABLE B ( A INT, B INT )
    Declare @ColumnVar nvarchar(128),@DatatypeVar nvarchar(128)
    SELECT @ColumnVar=x.COLUMN_NAME, @DatatypeVar=x.DATA_TYPE
    FROM INFORMATION_SCHEMA.COLUMNS AS x
    WHERE TABLE_NAME = 'A'
    AND NOT EXISTS ( SELECT *
    FROM INFORMATION_SCHEMA.COLUMNS
    WHERE TABLE_NAME = 'B'
    AND COLUMN_NAME = x.COLUMN_NAME )
    Declare @SQL VarChar(1000)
    SELECT @SQL = 'ALTER TABLE B ADD ' + @ColumnVar + ' '+ @DatatypeVar
    Exec (@SQL)
    select * from B
    Please Mark This As Answer if it helps to solve the issue
    http://stackoverflow.com/questions/2614101/alter-table-my-table-add-column-int

  • Get FI Documet number from BKPF table using CO document number in COVP tabl

    Hi,
    In  datasource 0CO_OM_CCA_9 , we have written a code in CMOD to get the FI Document Number from CO document Number.
    The flow of code is:
    1) From the CO document number, get reference document number  (REFBNfield) from, COVP table
    2) Pass this REFBN in AWKEY(10) field of BKPF table.
    3) We have created new field in datasource named 'ZBELRE' which gets populated with BELNR field obtained from BKPF table.
    This ZBELNR is the FI Document number.
    But somehow wrong FI Document number is getting populated.
    After analyzing code, we found that the AWKEY which we passed in BKPF table is incomplete and the full AWKEY is
    COVP-REFBN+COVP-AWORG
    Is this condition always remains true in all the cases? Also, is the selection criterion which we have used to find the FI document number from BKPF table is sufficient?
    Our CO Consultant says that we should also pass AWTYP along with AWKEY in BKPF table.
    Please suggest a solution.
    Following is the code :
    ***********Datasource Modification for0CO_OM_CCA_9*******************
      WHEN '0CO_OM_CCA_9'." Data Source
        TYPES:BEGIN OF ty_bkpf,
        belnr TYPE bkpf-belnr,
        xblnr TYPE bkpf-xblnr,
        bktxt TYPE bkpf-bktxt,
        awkey TYPE bkpf-awkey,
        bukrs TYPE bkpf-bukrs,
        gjahr TYPE bkpf-gjahr,
        END OF ty_bkpf.
        TYPES : BEGIN OF ty_bseg1,
        lifnr TYPE bseg-lifnr,
        belnr TYPE bseg-belnr,
        bukrs TYPE bseg-bukrs,
        gjahr TYPE bseg-gjahr,
        END OF ty_bseg1.
        DATA: it_bkpf TYPE STANDARD TABLE OF ty_bkpf,
        wa_bkpf TYPE ty_bkpf,
        it_bseg1 TYPE STANDARD TABLE OF ty_bseg1,
        wa_bseg1 TYPE ty_bseg1,
        l_s_icctrcsta1 TYPE icctrcsta1.
        "Extract structure for Datasoure 0co_om_cca_9.
        DATA: l_awkey TYPE bkpf-awkey.
        DATA: l_gjahr1 TYPE gjahr.
        DATA: len TYPE i,
        l_cnt TYPE i.
        l_cnt = 10.
        SELECT lifnr
        belnr
        bukrs
        gjahr
        FROM bseg
        INTO TABLE it_bseg1.
        DELETE ADJACENT DUPLICATES FROM it_bseg1 COMPARING belnr gjahr .
        SELECT belnr
        xblnr
        bktxt
        awkey
        bukrs
        gjahr
        FROM bkpf
        INTO TABLE it_bkpf.
        IF sy-subrc EQ 0.
          CLEAR: l_s_icctrcsta1,
          wa_bkpf,
          l_awkey,
          wa_bseg1.
          LOOP AT c_t_data INTO l_s_icctrcsta1.
            MOVE l_s_icctrcsta1-fiscper(4) TO l_gjahr1.
            READ TABLE it_bkpf INTO wa_bkpf WITH KEY awkey(10) =
            l_s_icctrcsta1-refbn
            gjahr = l_gjahr1.
            IF sy-subrc EQ 0.
              MOVE wa_bkpf-belnr TO l_s_icctrcsta1-zzbelnr.
              MOVE wa_bkpf-xblnr TO l_s_icctrcsta1-zzxblnr.
              MOVE wa_bkpf-bktxt TO l_s_icctrcsta1-zzbktxt.
              MODIFY c_t_data FROM l_s_icctrcsta1.
              READ TABLE it_bseg1 INTO wa_bseg1
              WITH KEY
              belnr = wa_bkpf-belnr
              bukrs = wa_bkpf-bukrs
              gjahr = wa_bkpf-gjahr.
              IF sy-subrc EQ 0.
                MOVE wa_bseg1-lifnr TO l_s_icctrcsta1-lifnr.
                MODIFY c_t_data FROM l_s_icctrcsta1.
                CLEAR: l_s_icctrcsta1,
                wa_bseg1,
                l_gjahr1.
              ENDIF.
            ENDIF.
            CLEAR: l_s_icctrcsta1.
          ENDLOOP.
        ENDIF.
    ***End of Datasource Modification for 0CO_OM_CCA_9*******************

    Hi,
    this forum is for the SAP BusinessObjects BI Solution Architecture. Please post your question into the corresponding product forum for SPA BW
    regards
    Ingo Hilgefort

  • How to add Document group  in t code S_ALR_87012082 for dynamic selection.

    Hi Gurus,
    I Need to add  Document group  in t code S_ALR_87012082  for dynamic selection.
    Currently here two groups are showing , Vender and Comp Code. i need to add Document group  there. Kindly guide me in this.
    Thanks in advance.

    Hi
    Pls follow below report
    *S_ALR_87012103 - List of Vendor Line Items *
    In dynamic selections you can find Document number, there you can give the range
    Reg
    Vishnu

Maybe you are looking for

  • Which is better for your hearing?

    Got a pair of Yuin earbuds, and my problem is listening on a windy day. The wind creates a lot of bass rumble, making me turn up the volume. Canal phones sit closer to the eardrums, but would block out the wind so I could keep the volume lower. Quest

  • View Access Denied

    Hi all, I created a custom workflow, with form and logic. I link to this custom workflow from the home page in the admin interface. I want to create my own capability for accessing this workflow. I added the capability using the admin UI, then set th

  • Finding used space in Oracle Cache

    Is there any way to find the size of the buffer cache used to perform a particular query. I want it in exact bytes/blocks. I doesnot mean the maximum buffer cache, but the used buffer cache?

  • Regarding reversing a SAP note

    Hi all , I implemented SAP note 921164 ( for MB51 performance improvement) .System suggested few other notes to be implemented as a prerequisite and I did the same. Right now , I want to cancel all the SAP notes implemented and implement only 921164

  • My old Airport Express wants to work but can't

    So I've read a lot about Airport Express PSUs dying, but that isn't my issue here. I bought this Express about 3 years ago. It worked great for the first 18 months as far as I can recall, we'd hold parties with Airplay streaming and everyone was real