Add EEWB Fields Into BP Contacts Screen In Web Ui
Hi Gurus,
I added 2 fields through EEWB for the BP relations screen it is working perefectly in the SAP GUI , i need to add these fields Into BP Contacts web ui screen , the problem is if fields data is already present it is working fine , if want to create new one for the contacts it is not setting the field value in web ui what is the problem help me resolve this problem.
Regards,
Naveen Kumar M S
Hi Masood,
In BP_DATA and BP_CONT SET Methods We Have the same Code
entity ?= current.
coll = entity->get_related_entities(
iv_relation_name = 'ZZ2RCEEWCONTACTRel' ). "#EC NOTEXT
current = coll->get_current( ).
if current is not bound.
return.
endif.
But while Debugging we found a difference
In BP_DATA
current is bound
whereas in BP_CONT current is not bound
while going inside
current = coll->get_current( ).
method IF_BOL_BO_COL~GET_CURRENT .
data: LV_ENTRY type CRMT_BOL_COL_ENTRY.
if ME->TABIX > 0.
read table ME->ENTITY_LIST index ME->TABIX into LV_ENTRY.
RV_RESULT = LV_ENTRY-BO.
endif.
endmethod.
ME->ENTITY_LIST was populated for BP_DATA and not populated for BP_CONT
Any Suggestions...
Regards,
Naveen.
Similar Messages
-
Adds selection field at the first screen of FBL3N (G/L line item display)
I would like to adds line item selection field at the default first screen of FBL3N.
The field I'd like to add at the default selection screen is :Amount.
This field can be selected at dynamic selection. But I'd like to use the field at the first screen of FBL3N, not in daynamic selection screen.
If anyone knows how to add the fields into FBL3N first screen, please advice me how to do it.
Edited by: Itchy31 on Jul 23, 2009 8:30 AMHi,
You can not add the new fields in the selection criteria thats the reason dynamic options are given for the further selection.
If you still want to add in the selection screen then go for a customisation and coordinate with the ABAPer which is not suggestable as it is readily avilable in dynamic selection. -
How can i add Custom fields into the
Dear Experts
We have Ecc6.0 system,
How can i add Custom fields into the Infotype Screen(PA30),i heard that we do it by PM01 Tcode.
But in PM01 i am unable to find the enhance infotype tab.
How can i do it ....pls help.....
Regards
SajidHi,
Do it thru the third tab : Single Screen.
There write down the infotype number (e.g. 0022) and say generate objects.
Regards,
Dilek -
How to add new fields in message creation screen
Hi All,
My requirement is to add another 2 fields in the message creation screen.
Also I found this link is bit useful.
Add custom fields to Support Message
Can anyone share the detailed procedure to add a field in the message screen.
Thanks in Advance.
Regards
Narasingam. BHello,
I think of something like:
First, you create extension, with transaction WE30.
Then, reduce your idoc, your extension should also be proposed.
Do not forget to add this extension in outbound we82, and/or we57 in inbound, and WE20, and find BTE or exit to populate extension.
regards.
F.S. -
REPORT PAINTER - Add a field to a selection screen - custom report
Hi,
I'm trying to add a field to a selection screen to a CUSTOM REPORT that has been made in REPORT PAINTER (Y_DVL_xxxxxxx). How should I proceed to do so?
Thanks a lot,
JulienHi Julien Girard ,
Could you please check the below link :
http://help.sap.com/saphelp_erp2005/helpdata/en/56/32e339b62b3011e10000000a11402f/frameset.htm
Regards,
S.Manu. -
REPORT PAINTER - Add a field to a selection screen to a CUSTOM REPORT
Hi,
I'm trying to add a field to a selection screen to a CUSTOM REPORT that has been made in REPORT PAINTER (Y_DVL_xxxxxxx). How should I proceed to do so?
Thanks a lot,
JulienHi Julien Girard ,
Could you please check the below link :
http://help.sap.com/saphelp_erp2005/helpdata/en/56/32e339b62b3011e10000000a11402f/frameset.htm
Regards,
S.Manu. -
Hi Experts,
How to add additional field into output table VENDORS/WH TAX TYPES AND CODES in RFIDYYWT(Generic Withholding Tax Reporting).
I have no idea how to start with, please give some advice.
Thanks!
IceDear Ice,
Use Append structure, see given link:
https://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eb61446011d189700000e8322d00/content.htm
Regards,
Abbas. -
HT2486 How do I add spouse field to all contacts to avoid doing it one by one?
How do I add spouse field to all contacts to avoid doing it one by one?
In Contacts>Preferences>Template>Related Names>Spouse:
Add it to the card and it will appear in all cards.
In Lion you will be looking for Address Book rather than Contacts. -
How to add new field into dynamic internal table
Hello Expert.
how to add new field into dynamic internal table.
PARAMETERS: P_TABLE(30). "table name
DATA: I_TAB TYPE REF TO DATA.
FIELD-SYMBOLS: <TAB> TYPE standard TABLE.
*Create dynamic FS
create DATA I_TAB TYPE TABLE OF (p_table).
ASSIGN I_TAB->* TO <TAB>.
SELECT * FROM (p_table) INTO TABLE <TAB>.
here i want to add one more field into <TAB> at LAST position and my
Field name = field_stype and
Field type = 'LVC_T_STYL'
could you please helpme out .Hi,
Please find the code below.You can add the field acc to your requirement.
Creating Dynamic internal table
TYPE-POOLS: slis.
FIELD-SYMBOLS: <t_dyntable> TYPE STANDARD TABLE, u201C Dynamic internal table name
<fs_dyntable>, u201C Field symbol to create work area
<fs_fldval> type any. u201C Field symbol to assign values
PARAMETERS: p_cols(5) TYPE c. u201C Input number of columns
DATA: t_newtable TYPE REF TO data,
t_newline TYPE REF TO data,
t_fldcat TYPE slis_t_fldcat_alv,
t_fldcat TYPE lvc_t_fcat,
wa_it_fldcat TYPE lvc_s_fcat,
wa_colno(2) TYPE n,
wa_flname(5) TYPE c.
Create fields .
DO p_cols TIMES.
CLEAR wa_it_fldcat.
move sy-index to wa_colno.
concatenate 'COL'
wa_colno
into wa_flname.
wa_it_fldcat-fieldname = wa_flname.
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 10.
APPEND wa_it_fldcat TO t_fldcat.
ENDDO.
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = t_fldcat
IMPORTING
ep_table = t_newtable.
ASSIGN t_newtable->* TO <t_dyntable>.
Create dynamic work area and assign to FS
CREATE DATA t_newline LIKE LINE OF <t_dyntable>.
ASSIGN t_newline->* TO <fs_dyntable>.
Populating Dynamic internal table
DATA: fieldname(20) TYPE c.
DATA: fieldvalue(10) TYPE c.
DATA: index(3) TYPE c.
DO p_cols TIMES.
index = sy-index.
MOVE sy-index TO wa_colno.
CONCATENATE 'COL'
wa_colno
INTO wa_flname.
Set up fieldvalue
CONCATENATE 'VALUE' index INTO
fieldvalue.
CONDENSE fieldvalue NO-GAPS.
ASSIGN COMPONENT wa_flname
OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
<fs_fldval> = fieldvalue.
ENDDO.
Append to the dynamic internal table
APPEND <fs_dyntable> TO <t_dyntable>.
Displaying dynamic internal table using Grid.
DATA: wa_cat LIKE LINE OF fs_fldcat.
DO p_cols TIMES.
CLEAR wa_cat.
MOVE sy-index TO wa_colno.
CONCATENATE 'COL'
wa_colno
INTO wa_flname.
wa_cat-fieldname = wa_flname.
wa_cat-seltext_s = wa_flname.
wa_cat-outputlen = '10'.
APPEND wa_cat TO fs_fldcat.
ENDDO.
Call ABAP List Viewer (ALV)
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
it_fieldcat = fs_fldcat
TABLES
t_outtab = <t_dyntable>. -
Need to add more field in the selection screen in tcode crm_dno_monitor
Hi,
In the transaction code crm_dno_monitor, i need to add extra fields in selection screen. Do we have any way to add fields in the standard tcode crm_dno_monitor.
Thanks
PrasadIf you need to add 5 fields on ticket screen then use EEWB enhancement.
The ticket screen transaction is crmd_order which even opens up after you double click the ticket no from crm_dno_monitor report list.
for crm_dno_monitor you can have the BADI CRM_DNO_MONITOR which will add later the column for the fields which you can add using EEWB
Check the following blog which guide you for custom field creation using EEWB
/people/bruyneel.guillaume/blog/2008/06/13/service-desk-implementation-guide-part-ii -
CRM - Add New Field in Competitor Product Screen
We are looking for the right way to enhance the competitor product screen (object prod_cp) in CRM 7.0. We have explored several options and we would like to have a confirmation that we selected the right option for the CRM level we are on now. We checked enhancement options via eewb and aet. However, in transaction axtreg there are 129 objects that can be enhanced but object prod_cp is not part of that list so I assume both tools mentioned cannot be used to enhance the competitor product screen (we want to add new fields and put business logic behind it). Is this a correct conclusion? I based the conclusion on post below:
AET enhancement capabilities
Found a OSS note 1088910 which looks like something we could use instead in CRM 7.0:
appl enhancement component view for customer
Competitor products (PRDCP) PRDCPOV/CustomHeader
Is this correct?
If this is not correct, how can we enhance the competitor product screen without changing the sap standard code (like append a Z structure to table comm_product_idx and then....are there any enhancement sports for this screen where we can add our custom code?). Do we have to use the framework enhancement concept?
Also found OSS note 1448299 that provides information about business functions for the Application Enhancement Tool (AET) in SAP Enhancement Package 1 for SAP CRM 7.0 and I saw that we will be able to enhance the competitor product screen as soon as we have upgraded to Ehp 1 just by switching on business function crm_inf_1. Is that correct?
Rgds,
JosephineHi Josephine,
You can enhance any standard CRM 7.0 component. follow this wiki on how to enhance standar CRM7.0 components
http://wiki.sdn.sap.com/wiki/display/CRM/HowtoGuide-EnhancingtheUIinCRM+7.0
You have two options to add new field to the competitor product screen
1. Using AET. Application Enhancement Tool, require very limited technical knowledge and i believe even function person can add a new field on the webui screen using AET. Search sdn with AET and you will find lot of information.
2. Create a z table with the new field value and product id (unique key).
Create a value node in the standar component.
On load of the webui screen fetch the details of the new field from the ztable and display it
On the save of the webui screen if the value of the new field has changed update the z table.
Regards -
Add ifnotype field to an Infotype Screen Control for Infotype 0006
How do I add an infotype field to an Infotype Screen Control for Infotype 0006. We need to add an additional Field for mobile phones. I have lloked in screen control (V_T588M) with no joy.
Edited by: Henry Manana on Sep 1, 2010 12:11 PM
Edited by: Henry Manana on Sep 1, 2010 12:12 PMYou may copy your current screen into a new screen (e.g. 2099) for MP000600 and add the 2 fields into the element list as well as the screen layout of screen 2099. Then set an appropriate Modification Group 3 to these 2 fields in T588M detail screen for screen 2099. Configure feature P0006 and table T588M to set screen 2099 for molga 16.
-
Add Custom fields in Report Incident Screen in EHSM
Hello experts,
I want to add custom fields like Notification No. and division in Report Incident screen in EHSM.
I have added two fields.
Business Object: EHHSS_INCIDENT
Node: BASIC_INFO_ALL
Structure: INCL_EEW_EHHSS_INC_BINFA_D (added two fields using append structure)
Now how can i link with my screen and how to fetch notification data (standard F4 help)?
and when i save data, where it will save?
Can you guide me with proper steps for it as i am new in it.
Thanks in advance.Hi Jayvin,
To add the above fields on the screen, open the component configuration of the required screen.
Enhance the same and add the fields from the respective Node.
You did not worry about saving the data, once the fields are placed on the screen it will get save on click of save/ on event of save.
Regards,
Sanket. -
How to add new fields to Profit center screen (KE51)
Dear All,
I have a requirement that to add new fields to the Create Profit center screen KE51.
I couldn't find the user exits for the same.
Please help me in this.
Thanks.
RaviHello Ravi,
I must respcetfully disagree(with other posts) that it is not possible to extend CEPC. In our system we have added an append with two new fields to CEPC. Now, that was the easy part. You must also find a way to maintain those fields when creating and changing profit centres. To do this it was necessary for us to add a button to the create/modify screens. It was also necessary to find a few enhancement spots in order to make this work(and it still is not perfect). I am being very vague here because even though it is posible I would not recommend implementing this solution. It was very time consuming and could be risky if you miss something. There is a reason why you can find so little information in SDN and other places about how to do this. Other, including myself have tried but it was painful.
I know that this does not help very much.
Regards
Greg Kern -
How to add one value into Input Entry Screen of Element
Hi ,
How to change the "Input Value" of Element which has already been processed and assigned. Its not allowing to update even though its been date tracked.
I want to add one more Value into Input Value screen.
Thanks
RamYou cannot remove existing input values or add new one if you have created any entries for the element
to know more details to maintain an element you can refer the following link
http://ramesh-oraclehrms.blogspot.com/2007/08/maintaining-element.html
Regards
Ramesh Kumar S
Maybe you are looking for
-
Mac Mini 10.6.8 slow startup
I have a mac mini with 2 gb ram running 10.6.8. Hard drive is 500gb with over half of that unused. Initial boot time first thing in the morning is slightly over a minute. It also starts programs pretty slow after that for about 30 minutes. Then it se
-
Why does the new update for IPod screw up the function? I can't get on hardly any of my apps, let alone, download any more apps either. I am one unhappy person.
-
Hi to all, when creating a report the background colour of a graph is always black and the graph itself is green. How can I change these colours? Thanks for your help. Daniel
-
Multiple Image Upload with save to database not working in IE anymore
Since updating IE to SP3 ADDT Multiple Image Upload with save to database does not work anymore in IE. It will show a regular file upload field, an does not allow selection of multiple files. It does work in Firefox, but not all my clients use firefo
-
IPhone SDK 7 installation hangs on "configuring installation"
I'm running an iMac 20" Intel, 10.5.3, and a previous iPhone SDK. I've the installer all night, but to no avail.