Add fields in delivery report (ROIGSD01) in TD.

Dear Expert,
Anyone knows how can i add fields in the report ROIGSD01? the one which I use to get the deliverys in TD
I already added the fields in the ROIGSD01_ITEM_ALV structure, but I could not find the user-exit to fill this fields.
anyone made it before?.
I would realy appreciate you help.
Best regards.

Hi
Madhu is right. Please, see the coding in include V50R_USEREXITS
* 1. Add field to list-display
* Userexits for additional fields on list display
* use append-structure in DDIC at structure SHP_VL10_ITEM
* and ad field value in one of these routines
*INCLUDE LV50R_VIEWG02.       "POS_ITEM_FILL_USER:       SD/MM-orders
*INCLUDE LV50R_VIEWG03.       "POSTAB_VEPVG_FILL_USER    SD-Index
*INCLUDE LV50R_VIEWG06.       "POSTAB_VETVG_FILL_USER    MM-Index
*INCLUDE LV50R_VIEWG07.       "POSTAB_DELIVERY_FILL_USER Delivery item
Do double click and see the coding. If you are in ECC 6.0, do an implicit. If not, go to SCCR.
I hope this helps you
Regards
Eduardo

Similar Messages

Add fields in VL10 report - EHN

Hi ,
I am supposed to add two fields from Table KNVV-KVGR1/KVGR2 table in to alv report output of VL10/VL10A.
I have tried for BADI but none got trigged. Is.Is the any Badi/Exits available or do I need to go for explict/implicit enhancement.
Kindly help urgent requirement.
Thanks in advance.
Thanks,
D.Dutta.

Hi
Madhu is right. Please, see the coding in include V50R_USEREXITS
* 1. Add field to list-display
* Userexits for additional fields on list display
* use append-structure in DDIC at structure SHP_VL10_ITEM
* and ad field value in one of these routines
*INCLUDE LV50R_VIEWG02.       "POS_ITEM_FILL_USER:       SD/MM-orders
*INCLUDE LV50R_VIEWG03.       "POSTAB_VEPVG_FILL_USER    SD-Index
*INCLUDE LV50R_VIEWG06.       "POSTAB_VETVG_FILL_USER    MM-Index
*INCLUDE LV50R_VIEWG07.       "POSTAB_DELIVERY_FILL_USER Delivery item
Do double click and see the coding. If you are in ECC 6.0, do an implicit. If not, go to SCCR.
I hope this helps you
Regards
Eduardo

Add fields to IE36 Report

Hi guys,
I have a question about transaction IE36..
What I need is to add some fields to be displayed in the report called by IE36 t-code..
I need to have the ability to add these fields via the "Change Layout Screen".
Is there any exit, badi, or something like this for adding fields to these report?
Thanks in advance!
Nicolas.

Hi Pete,
Your help was very useful!
Thank tou very much!
Nicolas.

Add fields to standard Report for T-code-S_PL0_86000028-Financial Statement

Hi Sap Gurus,
The standard trial balance report does not generate the trial balance report with the parked documents, since the parked documents do not update the posted documents tables.
now i have to add that colum next to the normal items column and display Parked Document data.
so please suggest me which is the best way to do it.
1. Either copying the standard to Z prog and do it
2. Or enhance in any point in the standard Report.
this report seems to have dynamic programs in it so confused how to start on.
Tr code is: S_PL0_86000028

Hi Sagar,
Adding a New field is a new requirement. Its a new developement and it would be good idea to
go ahead and develope a Z-program.
Using Enahancement- there is high possibility of affecting the functionality...
Regards,
Kittu

Add field in 'Subsequent Outbound Delivery Split' subscreen in VT01N tcode

Hi,
My Requirement:
Add field STFAK in the report in 'Subsequent Outbound Delivery Split' subscreen in VT01N transaction. This field is to be added in Structure LEDSPD_LIST_ITEM, and value in it is to be mapped from MARA-STFAK.
Steps to the Subscreen 'Subsequent Outbound Delivery Split' :
1. Transaction:VT01N. Enter TransportPlanningPt and Shipment type
2. Click on 'Deliveries' button. A subscreen for 'Select Outbound Deliveries' pops up
3. Click on Execute. A list of deliveries is retrieved
4. Select a delivery. Click on 'Split Deliveries' button. Subscreen 'Subsequent Outbound Delivery Split' pops up.
Issue:
I have added the field in the structure LEDSPD_LIST_ITEM. However, it is not displayed on the report generated in 'Subsequent Outbound Delivery Split' subscreen in VT01N transaction.
Also, to map the value in this field, I need to make changes in the program/screen exit/BADI. I am unable to find the exact program/screen exit/BADI where I can make the changes.
Request to Experts:
I have referred several posts on SDN, but have not found anything of relevance. I am debugging also since quite some time, but am yet to come to a relevant solution. Please guide me to a solution for this issue.
Thanks in advance,
Regards,
Smruthi Acharya

self resolved

I want to add some fields in the report of FBL5N, Can anybody tell me how ?

I want to add some fields in the report of FBL5N, Can anybody tell me how to do it?
The fields are sales order, delivery, order quantity, net value and others.
I can only find the shipment number in FI document.
Thank you very much.

Dear Jie,
Billing document number can be displayed in customer line item display
(FBL5N) and not in G/L line item display (FBL3N).
The value of VBELN is saved in table BSEG. So, this means, you
have to define the field BSEG-VBELN as a special field in table
T021S. Then you can use it in FBL3N, because then the report looks
directly in BSEG-VBELN.
For further information,please read the SAP note 207436. You don't have to
implement the coding corrections, if they are already in your system
with the hotpackage. But it explains very detailed the system
behaviour. The example in the note with field EBELN could be
replicated on your field VBELN.
About the MEINS field, please refer to 1-U_MEINS (bseg-meins field).
The SAP note 215798 may also be helpful.
Mauri

How to add new fields to standard reports

hi friends,
im into ABAP and working across all modules..the basic thing is users and functional people are not satisfied with the standard reports..they need some logic change or to add some more fieldsinb the standard reports.For logic change we have to copy the standard to zprogram and can do or create a new program itself..but in many cases they ask for extra fields.how to achive it ..
for example my requirement now is adding vendor name field to the report FAGGL03 ....i found a badi and have make changes to it ...now the vendor name will be coming in sgtxt over writing the text ...but they need text also...now what shall i do???
append structure vendor name field in faglposx table ....???how to find out the final internal table from where the output is coming ????
?when we check the standard rewport codes...there are lot of include statements perform statements etc ...how to find out the final structure or internal table which has the output values..???

hi
it would be better if u giv full name of the report
if ur displaying the data in alv then search for the
word REUSE_ALV_LIST_DISPLAY REUSE_ALV_GRID_DISPLAY from which u can get the final table name
then check the data that is comming into
try using implicit enhancement or any other exit in the declaration and declare a new structure with the field and append it to the field catalog
if ur displaying the data using write statement
then create a zprogram and add a write statement
fi ur unable to find here the final table then after displayign the report start the debugging and double click on any row to find out more easily
shiva

Add fields in KOB2 & KSB2 report in selection screen as well as output

Dear All,
I have an issue in which i have to add fields in KOB2 & KSB2 report.
i need to add below fields to KSB2 report.
1) Internal order
2) Vendor
3) Purchasing group
I also need to add profit centre in selection screen for KSB2
Similarly for KOB2 i need to add below fields
1) Cost centre
2) Vendor
3) Purchasing group
I also need to add cost centre as input for KOB2 report.
I have gone through note 325546 "CO line item reports: Creating a user-defined field" which can be helpful.
However i am not sure as to how do i add fields in input screen as required.
Other alternative is to create a Z report however when i try and copy the report both KOB2 & KSB2 call same report "RKAEP000".
I am not able to get as to how do i differentiate the call of different screens when ZKOB2 is called or when ZKSB2 is called.
I could identify " c_item_group" field having different values however i couldnot get a proper logic as to how correct screen can be called based on input
Please suggest .
Thanks,
Ronak

Hi Raymond,
The note 747588 is good as soon as you are adding fields from the same table only.
When I have added additional table into KAEP_SCOVP selection view below COVP (just because the extra fields I need are not in COVP) they will show up in KOB1 as selection criteria, but not getting saved.
Any idea if any ABAP should be regenerated or what extra steps are required when adding more tables into Selection View?
Thank you!

Need to add extra field in BEX report

Hi Experts ,
I have a problem in bex report.
scenario is like this--
APD will generate the BPS Daily report on Branch, Group, Area, Region and total company levels and then exports into a flat files stored in appserver
and i got the requirement to change the layout of the report. The client wants to need the one field extra ie. 'REPORTS RUN DATE '
and i am stuck here how to add this field in my report ..
Please help me ASAP.
Thanks a lot in advance
Saurabh

hi,
Enhance your APD and in the target add field REPORTS RUN DATE .
Fill this using ABAP routine which populates the sy-datum in this field.
regards,
Arvind.

How to add field to the header for FBL5N ALV report

Hi,
I need to add fields to the customer line item display ALV report(FBL5N) header part.Right now there are four fields in the header like customer, company code, name and city, after that I need to add first name last name and phone no. Can any one tell me where exactly I need to add and populate there fields to be appear in ALV output list.
Thanks in Advance
Swapna

Yes I have tried, I have place a break point in that perform but it does not stop. I think that is not the correct place to added and populate fields. That routine is for populate selection screen ranges single and multiple values and parameters only.
Thanks
Swapna

How to add a computed field to a reports

I have a report where I would like to add a column that is the sequence of the row. It is not the rownum in the db, but I want it to be a row number for what is returned.
So, if I return 10 records, I would like a column to contain 1 through 10 to depict the row number.
I do not want to have this number in the table or view.
Is it possible to add a computed field to a report like this?
If so, how?
Thanks - Jim

The SQL function rownum should suffice if the report is not too complicated, as this returns the number of the row rather than the database row ie.
select empno,ename,rownum
from emp
add some clauses each time and you should see that each row is always numbered 1 to n.
However, if you introduce the HTMLDB column sort functionality into the report then it would appear that it is the result set that is sorted rather than a new query being issued.
Hope this is of help.

How to add new text field in standard report

how to add new text field in standard report?

Hi,
I presume you are talking about a report display in ALV and u wish to add a column to it .
If it is a global requirement ,as in table being used there in ALV can be modified, then you can append the table and the system should pick up the same automatically from there.
Otherwise , you can make a Z program . Modify the catalog being used in ALV.
Regards,
Shweta

How to Add a new Selection Field in COPA Report

Hi Gurus
I'm new on SAP COPA reporting and I don't know how to solve this problem.
I need add a new Selection-screen field (char1), not connected with any characteristic.
This is necessary becuase if the user flag this field, when teh report is running I'll replace some key-figure values using the EXIT
ZXYEXF05. I don't find any instruction how to define this simple kinfd of variable, and use it into a Report.
Thank-you in advance for your help.
Claudio

Hi
I'll try to explain better my need.
I've 10 CO-PA Key-Figures used to Split in the Cost of a material in different Cost Items.
Using the customizing I fill these key-figures using some rules.
The new requirement is use SOMETIME the same KF, by displaying different Costs overwritting the original values using the exit ZXYEXF05. But I need to know when the user wants consider the original value of KF, and when he wants overwrite these values (when I have to run teh exit). So I thought to create a new Selection-screen field (Char1), to permit to the user to pass to some report this user request. I thought to define a global variable, and add it to several reports when this feature is required.
Can you suggest a better solution ???
I could create some empty KF and fill them using teh exit, but I would prefer not expand the CO-PA structure.
Thanks for help.
Claudio

How to add custom field in delivery address/performance location tab in SRM shopping cart and Ship to address Pop-up in SRM PO?

Hi Experts
i have a reuirement where i have to add custom field in delivery address/performance location tab in SRM shopping cart and Ship to address Pop-up in SRM PO
i am doing below steps for this.
1. Adding custom field ZZfield in structure INCL_EEW_PD_PARTNER_CSF by using append structure.
2. Spro ->Supplier Relationship Management -> SRM Server -> Cross application basic settings -> Extensions and field controls (personalization) -> Configure field control ->Configure Control for Fields of Substructures
then click on "Metadata for Fields of Substructures and Table-Like Enhancements"
add the below entry
Bus. Object Set Type : I am trying 7 and 29
Structure Field Name : ZZfield
Bus. Object Type       : BUS2121/BUS2201
Set Level                    : Item
Field Visible : Check box should be checked
Field Enable : check box should be checked
Can anyone has the idea of this?
Thanks
Rohit

Hello Rohit,
Please create a enchancement for component /SAPSRM/WDC_UI_DO_SHIPTO.
Add new input field and label in view V_DODC_SHIPTO.
Bind the input field value with field ZZfield from structure /SAPSRM/WDC_UI_DO_SHIPTO in the context node SHIP_TO .
Regards,
Neelima

Add fields in Drilldown customer reporting open items

Hello,
I have made a copy of the standard Drill down report 0SAPDUEAN-01,but I want to add fields that are not in the pooll list (like Reference - BKPF-XBLNR) or Assignment (BSEG-ZUONR).
How can I do this?
Any help will be rewarded
Best regards,
Victor

Hi Austin
I need to do the same. I need to bring Bill of Lading number (which is Shipment number in our case). I need to bring that to the assignment field in the gl account. I know this can be done through sort key, but the field TKNUM is not avilable for sort key. I was wondering if you have found any solution of this.
Thank you
John

Add fields in delivery report (ROIGSD01) in TD.

Similar Messages

Maybe you are looking for