Add field in 'Subsequent Outbound Delivery Split' subscreen in VT01N tcode

Hi,
My Requirement:
Add field STFAK in the report in 'Subsequent Outbound Delivery Split' subscreen in VT01N transaction. This field is to be added in Structure LEDSPD_LIST_ITEM, and value in it is to be mapped from MARA-STFAK.
Steps to the Subscreen 'Subsequent Outbound Delivery Split' :
1. Transaction:VT01N. Enter TransportPlanningPt and Shipment type
2. Click on 'Deliveries' button. A subscreen for 'Select Outbound Deliveries' pops up
3. Click on Execute. A list of deliveries is retrieved
4. Select a delivery. Click on 'Split Deliveries' button. Subscreen 'Subsequent Outbound Delivery Split' pops up.
Issue:
I have added the field in the structure LEDSPD_LIST_ITEM. However, it is not displayed on the report generated in 'Subsequent Outbound Delivery Split' subscreen in VT01N transaction.
Also, to map the value in this field, I need to make changes in the program/screen exit/BADI. I am unable to find the exact program/screen exit/BADI where I can make the changes.
Request to Experts:
I have referred several posts on SDN, but have not found anything of relevance. I am debugging also since quite some time, but am yet to come to a relevant solution. Please guide me to a solution for this issue.
Thanks in advance,
Regards,
Smruthi Acharya

self resolved

Similar Messages

Subsequent outbound delivery split with serial numbers

Hi,
I have a question about subsequent outbound delivery split with already assigned serial numbers.
Case:
First delivery is created and serial numbers are assigned. Now we have to do a subsequent delivery split for that delivery. In SAP standard, it's not possible to do a subsequent delivery split if serial numbers are already assigned.
Does anyone know how we can handle this?
Best Regards,
Florian

well, seems to be not possible at all.

Avoid outbound delivery split creation during GI

Hi guys,
Every time we perform a GI in /SCWM/PRDO for a partial picking, the system creates a delivery split, leaving the rest for the original delivery.
I want to avoid the delivery split! The operators have a procedure to check the warehouse tasks before the GI, but sometimes they forget to check and they post the GI with open quantity.
For this reason I would like to know; if there is a way to block the GI when there are items with open quantities?
Thank you all.
Anderson Ranéa

Hi
If you want to prevent outbound delivery split, you may refer to note 1600871 for details, it has 2 solution provided to avoid the spliting.
Hope it helps..
BR
Vic

BADI/user exit to be used EIPO-TEXT1 field of the outbound delivery line item?

Hi ABAPERS,
Need some help on an enhancement with reference to outbound delivery in SCM module.I have a requirement for an enhancement to ensure that the License Check is performed for each Delivery Item based on the Material`s Export Control Parameters and updating the license number identified against each of the line item in the outbound delivery in a predetermined field.
Basically, Using enhancement, find the appropriate License based on the information fetched from the Delivery Document and check if this is matching with the available License Information. Then the appropriate License fetched should be visible in the License Log of the Delivery Document.
The valid License No. fetched should be updated at the Delivery Document Item – Foreign Trade – Comments Tab-Description Field 1.(ie. populate the license T606Z-GENNR in EIPO-TEXT1 field of the outbound delivery line item.).
Could you please advise on the BADI/user exit to be used in this case. Request your inputs.

I found the solution myself. I was actually not needing a user-exit to do this. I just simply solved it by using function modules READ_TEXT and SAVE_TEXT in a customer program.
Regards.

BAPI or function module for creating outbound delivery agains STO

Hi,
Is there any function module or BAPI to create an outboud delivery against STO? Appreciated if anybody tells what are all the mandatory fields to pass.
Thanks and Regards,
Suresh

Hi,
Pls check the BAPIs,
BAPI_OUTB_DELIVERY_CONFIRM_DEC BAPI for Outbound Delivery Confirmation from a Decentralized System
BAPI_OUTB_DELIVERY_SPLIT_DEC BAPI for Subsequent Outbound-Delivery Split from a Decentralized Syste
Regards,
Renjith Michael.

BAPI or FM for VL10F (outbound delivery)

Hai All,
Can Anyone say how to create outbound delivery (VL10F) By Using FM or BAPI.
Explain With Example.
Pls Most Urgent.
Regards,
Ekadevi.S

Hi,
   These are the existing BAPI's for Outbound Deliveries.
BAPI_OUTB_DELIVERY_CHANGE
BAPI_OUTB_DELIVERY_CONFIRM_DEC BAPI for Outbound Delivery Confirmation from a Decentralized System
BAPI_OUTB_DELIVERY_CREATENOREF Generates Delivery Without Reference
BAPI_OUTB_DELIVERY_CREATE_SLS Generates Delivery for Customer Order
BAPI_OUTB_DELIVERY_CREATE_STO Generates Delivery for Stock Transport Order
BAPI_OUTB_DELIVERY_SAVEREPLICA BAPI Function Module for Replication of Outbound Deliveries
BAPI_OUTB_DELIVERY_SPLIT_DEC   BAPI for Subsequent Outbound-Delivery Split from a Decentralized Syste
Regards,
Sandeep

Creating Outbound Delivery using BAPI

Hi All,
Can anyone advice is there any way to create Oubound Delivery using BAPI.
If you have come accross with such developments or idea, can you please share your idea?.
Thanks,
Muruganand.K

Hi,
Use BAPI_DELIVERYPROCESSING_EXEC - Create Delivery from Delivery Due List
BAPI_OUTB_DELIVERY_CONFIRM_DEC BAPI for Outbound Delivery Confirmation from a Decentralized System
BAPI_OUTB_DELIVERY_SPLIT_DEC   BAPI for Subsequent Outbound-Delivery Split from a Decentralized System
BAPI_OUTB_DELIVERY_CHANGE
BAPI_OUTB_DELIVERY_CREATENOREF
BAPI_OUTB_DELIVERY_CREATE_SLS
BAPI_OUTB_DELIVERY_CREATE_STO
BAPI_OUTB_DELIVERY_SAVEREPLICA
Also check
BAPI for Outbound Delivery Creation with reference to Sales Order - VL01N
BAPI / FM for Create Outbound Delivery for PO
Outbound Delivery User Exits
EXIT_SAPLV50I_003              User Exit BAPI Outbound Delivery Replication
EXIT_SAPLV50I_004              User Exit BAPI Outbound Delivery Confirmation
EXIT_SAPLV50K_007              User Exit BAPI Outbound Delivery Replication (Outbound from Sender System)
Function module: OIJ_EL_DOCG_CREATE_DELIVERY - Create outbound delivery

Open Qty Field in Outbound Delivery

Hi All,
I would appreciate any assistance that you could offer on this issue.
It is concerning the little known 'Open Qty' field in the outbound delivery.
The business process here is to create outbound deliveries, which are then continually added to as and when stock becomes available.
The Open Qty field should display the open qty from the sales order line, which includes the qty just delivered.
So for example, a user attempts to add several lines to an existing outbound delivery (ie outbound delivery > deliver sales order).
The user would then compare the qty delivered against the Open Qty - if they match then ok. If the qty delivered is less than the open qty, then the user would delete this line as they are only interested in delivering the full qty.
However the 'Open Qty' is not working as expected. Eg if open qty on sales order is 2000. But qty delivered is only 1500, the open qty would = 1500. This is incorrect. After the user saves the deliver and then re-checks he would see qty delivered = 1500 and Open Qty = 2000, so then he would know that the full qty was not delivered.
This business has just migrated from 4.6c (where this field behaved correctly) to ECC 6.0.
Thanks for any advice.
Regards
Guy

Delivery qty - LIPS-LFIMG.
You cannot get open quantity directly.
use this way.
Delivery qty - LIPS-LFIMG.
order qty - VBAP-KWMENG.
open qty = delivery qty - order qty.

Handling Unit Link (VEKP-EXIDV) in inbound/outbound delivery

Hello,
I need to code the automation of logical pick and pack tasks in the trading company such that the following fields of the outbound delivery are automatically populated based on the corresponding fields from the inbound delivery:
1.) Pick Quantity (LIPSD-PIKMG) comes from the pick quantity from inbound delivery to trading company
2.) Batch Number (LIPS-CHARG) comes from the batch from inbound delivery to trading company
3.) Handling Units (VEKP-EXIDV) comes from the handling units from the inbound delivery to trading company.
I've found a way to link the outbound to it's corresponding inbound delivery through table EKES (link of stock transfer order number to the inbound delivery), however I could not find the link of the stock transfer order to the handling units (VEKP-EXIDV).
Any idea on this?
Thanks.
Sincerely,
Ice

//What I found was that VBFA-VBELN = VEKP-VENUM, given that VBFA-VEBELV = inbound directory (LIKP-VBELN) and VBFA-VBTYP_N = 'X' (handling unit).
From that link I was able to get the external handling units (VEKP-EXIDV) since the key VENUM has been identified.
During the pick and pack i have to link the LIKP+LIPS and VEKP for handling unit and internal identification number.
VBFA is for sales document flow which is helpful for forward and reverse navigation to itdentify the documents .
Inputs for the Feed has to be from LIKP / LIPS and VEKP
Please refer to tcode VL02N and in here check Packing options with all the subscreens of Packing Hu's and Single entry .
regards,
vijay

BAPI or FM for Outbound Delivey Split using VLSP transaction

Hello All,
We are developing a application in Portal.In that,One of the requiremnt is ,we need to do a Delivery Split for the outbound delivery same like VLSP transaction from Portal.Please let me know is there any Function Module or BAPI available to do Outbound Delivery Split.
Thanks in Advance,
Vigneswaran S

Hi,
I need to create a new split delivery from the existing outbbound delivery.But this BAPI does not return any new split delivery.
Regards,
Vigneswaran S

Updating delivery quantity in outbound delivery.

Hi,
I have to update the delivery quantity field of an outbound delivery from the quantity that is coming in through an idoc.Is there any BAPI to do the the updation? Also please explain the parameters which need to be passed in the BAPI.
I tried using a BDC recording but it gave an error that the article is locked.
Its urgently required.
Thanks,
Sandeep.

Hi,
Here are the some useful links.
BAPI to create delivery
Delivery
BAPI Outbound delivery
Please go through them
Regards,
Rama.Pammi

Add display fields on subsequent delivery split

Hello all,
I need to add new fields to display additional information on the delivery split.
This information is very important to help the person that is performing the delivery split.
Is there a way to add display fields?
Thanks in advance.
Best regards,
Tiago Magalhães

No solution..

How to add Total Quantity in Inbound and Outbound Delivery screen

Hi,
I want to add Total quantity field in Inbound and Outbound Delivery screens.
In document flow i can see the line item quantities in ALV Format, but if i select Display the totals above the entry check box
in Change Layout--> Display, i didn't see any totals displayed.
Please help me on this?
Regards
Bhuvana

Hi
If the field is a customer field, see BADI 'LE_SHP_TAB_CUST_HEAD'
Regards
Eduardo

Subsequent delivery split - VLSP

Hi,
I have a scenario where deliveries are created with huge quantities, let's say 1000 tons. Since 1000 tons won't fit in a truck I tried to use transaction VLSP (subsequent delivery split) in order to divide the original quantity in smaller ones. For example, I would like to split 1000 tons in 50 deliveries of 20 tons each one, but I can't do it in a few commands (I have to assign a number in the result field and a quantity in the quantity field, click the u201Csimulateu201D button, assign another number in the result field and another quantity and so on). I think there must be a better way to do this but I don't know how.
Does anyone have any sugestion?
Thanks in advance.
Paulo

HI
In the table LIPS and into the field LIPS-VGBEL enter the sales sdocument number and execute it will return with the two deliveries .
Else you can also check in the document flow table VBFA
regards
Prashanth

Status of Outbound Delivery in case of batch split

Hi All,
I have a query regarding the status updation of outbound delivery in case of a batch split.
I have a delivery with 10 qty of batch managed material and is distributed from ERP to EWM. As per standard SAP, the following 2 options exist to carry out a batch split in EWM
1. Create batch sub items in the Outbound delivery Order
2. To adopt quantities pertaining to multiple batches during WT creation from the 'Stock can be removed' tab.
We are using the second option as per business requirement. The process is working fine if i create & confirm multiple WT's at one shot i.e in this case i created one WT for 5 qty with batch-1 & one more WT for balance 5 qty with batch-2 & confirmed both the tasks. System created 2 batch sub items automatically when WT's are confirmed & the header status of 'picking' got updated as 'completed'.
However the problem is when i create only 1 WT for partial quantity. For eg. in this case i created onle WT for 5 qty of batch-1 & confirmed the task. System created 1 batch sub item for 5 qty & also updated the 'picking' status in header to completed. My understanding is that since entire delivery quantity is yet to be picked, the picking status at header must be 'partially completed' & not 'completed'.
I have checked the status profile & have status types DER & DPI active. Does this require any config in the status profile OR Is there any other way in which i can achieve this functionality ( i.e. Header status must be 'partially completed' untill entire delivery quantity is picked.)
Would be glad if you can share your thoughts on this.
Regards,
Smitha Pai.

Thank you for your kind reply.
I performed failover to my physical standby and now archives are going on my logical standby from new primary but changes are not getting applied on my logical standby database.
when i tried to register the logical logfile from new primary on my logical standby i am getting following error.
SQL> ALTER DATABASE REGISTER LOGICAL LOGFILE 'E:\orcl1\stdb\archives\TESTDBT001S00001.ARC';
ALTER DATABASE REGISTER LOGICAL LOGFILE 'E:\orcl1\stdb\archives\TESTDBT001S00001.ARC'
ERROR at line 1:
ORA-01287: file is from a different database incarnation

Add field in 'Subsequent Outbound Delivery Split' subscreen in VT01N tcode

Similar Messages

Maybe you are looking for