Add fields in Drilldown customer reporting open items

Hello,
I have made a copy of the standard Drill down report 0SAPDUEAN-01,but I want to add fields that are not in the pooll list (like Reference - BKPF-XBLNR) or Assignment (BSEG-ZUONR).
How can I do this?
Any help will be rewarded
Best regards,
Victor

<P>Hi Austin<P>
<P>I need to do the same. I need to bring Bill of Lading number (which is Shipment number in our case). I need to bring that to the assignment field in the gl account. I know this can be done through sort key, but the field TKNUM is not avilable for sort key. I was wondering if you have found any solution of this.<P>
<P>Thank you<P>
John

Similar Messages

  • Re:- How to see customer/vendor open items for profit center wise

    any one help me regarding : How to see customer/vendor open items for profit center wise. That is possiable or not please suggest to me. I am using 4.6c version .

    Run the report from Tcode FBL1N for vendor open item and from FBL5N fron Customer open items.
    When you get the report, click on Change Layout icon ( or press Control + F8 from keyboard), search Profit Center fron the Table of Hidden fields on the right hand side. Move that field to the Left hand side table. Click ok, now you should be able to see the Profit Center column in your report.
    You can save this layout by clicking on the Save Layout icon ( or press Control + F12 from keyboard)
    Next time you can choose the saved layout by clicking on the Select Layout icon ( or press Control + F9 from keyboard)
    Regards
    Dharmveer

  • Add fields in KOB2 & KSB2 report in selection screen as well as output

    Dear All,
    I have an issue in which i have to add fields in KOB2 & KSB2 report.
    i need to add below fields to KSB2 report.
    1) Internal order
    2) Vendor
    3) Purchasing group
    I also need to add profit centre in selection screen for KSB2
    Similarly for KOB2 i need to add below fields
    1) Cost centre
    2) Vendor
    3) Purchasing group
    I also need to add cost centre as input for KOB2 report.
    I have gone through note 325546 "CO line item reports: Creating a user-defined field" which can be helpful.
    However i am not sure as to how do i add fields in input screen as required.
    Other alternative is to create a Z report however when i try and copy the report both KOB2 & KSB2 call same report "RKAEP000".
    I am not able to get as to how do i differentiate the call of different screens when ZKOB2 is called or when ZKSB2 is called.
    I could identify " c_item_group" field having different values however i couldnot get a proper logic as to how correct screen can be called based on input
    Please suggest .
    Thanks,
    Ronak

    Hi Raymond,
    The note 747588 is good as soon as you are adding fields from the same table only.
    When I have added additional table into KAEP_SCOVP selection view below COVP (just because the extra fields I need are not in COVP) they will show up in KOB1 as selection criteria, but not getting saved.
    Any idea if any ABAP should be regenerated or what extra steps are required when adding more tables into Selection View?
    Thank you!

  • Dunning (Want to add interest calculation on unpaid invoices (open items)

    We have a requirement in dunning program. we would like to add interest calculation on unpaid invoices (open items) to our dunning letters. This interest should be not posted, but calculated only for information purposes. At this moment we can calculate interest only on cleared items.
    anyone has any idea about this ? what possibilities are there in SAP for this requirement?
    Thanks,
    Naveen

    Hello Vimal ,
    I want to understand we have setting in Dunning FBMP and OB42. if i will set the interest in OB42 and Select the interest indicator in FBMP.! the interest will be calculated for open items and no posting will be done in customer A/c?
    Will you please elobrate about the setting that will be required to do the setting as per the requirement.
    Thanks,
    Naveen
    Edited by: Naveen.Rana on May 26, 2011 9:22 AM

  • Add fields to the standard report QM15

    i want to add fields to the standard report.
    t.code QM15 which display the list of items: selection of notifications.
    the fields i want to add are:
    1. batch no
    2. Sample no
    3. Main vendor
    please let me know how can i do this. if any one can help me with screenshot doc. this is really helpful.
    Thanks

    Hi experts,
    I have done with the z** creation of the standard report. I also create the z*include for the standard includes which are in the standard program. But I not able to find the fieldcatlog or include where I can add my new fields.
    But I tried with one structure tht is standard structure in tht standard report so i make it as z*structure and I append my new fields to this structure. I debug the report and this works fine and also shows output, but at output when I change the layout to see these new fields it shows dump.
    Then I tried with one more thing to give the positioning to my new added fields. (This is what u can say column positioning ).
    When I execute this,it goes to dump screen.
    Now I don't what to do with this.
    If any one like to see the code. Plz let me know I will post the code.
    Or if any one have any document on this plz share. Or any other solution.
    Thanks in advance.
    Thanks
    Sachin

  • Add Ship-To Account to AR Open Item Processing TCodes (F-28, F-32, etc.)

    We have received a request to add in the Ship To Partner in to the AR incoming payment and clearing TCodes (F-28, F-32).  While I know we can add additional fields through TCode 07F5 I can't seem to find a way to add in a new custom field, especially one that is going to require some code more than likely to identify the correct partner on the invoice.  Does anyone have any idea? At present they have one screen open with F-28/F-32 and another screen with a SQ01 query that displays the accounts open line items along with the Ship To partner so they can identify the items they want to clear against but having it all contained within one layout on one screen would be ideal.
    Thanks in advance!

    I had thought about something like that.  We do use some of the XREF keys but I don't believe all of them.  Before I go and populate the Ship To in to a existing field I was hoping there is an option to add a custom field (that while not storing anything in the db does show the value I need in the open item processing screen) and have code behind it.  A benefit, atleast one that I have thought of over populating the data in to a new field is that the code could for example look up the Ship To party using the invoice reference field in case of a partial payment. I guess you could develop something to populate the Ship to on to the XREF Key in the event of a partial (residual) payment as well but then we've got two developments going on.  Still, Plan B  
    Thanks!
    Edited by: David Jorden on Mar 24, 2011 10:44 PM

  • Customer Statement - Open item list

    hello,
      i need some help with customer statement prints. I need to be able to print all open items for all company codes for a particular customer account together .
    Please let me know.
    Thanks.

    Use T Code FBL5N, enter the range of customers, company code, select radio button 'open items', check the checkbox 'normal items' and execute (F8).  In the report screen, from the top menu, choose List -> Export -> Spreadsheet (or whatever format you want) and then you can print it.
    Assign pts if this answers your query!!!

  • Program RFKORD10 and print of customer statement/open items

    Hi all,
    I'm trying to run the program RFKORD10 to print all customers (of a company), the open items statement.
    The problem is that, I can't use this program to print in one spool, the correspondence of all customers of a company.
    I can only use test run, and it displays the spool one by one (and if I want, I can print it).
    Anyone knows how to work with this? What is missing in my approach? Even the requests (FB12) are only possible to request for one customer and not for all of a company.
    Can anyone explain to me what is necessary to print automatically all the open items correspondence for a company and by customer? But in one spool, or automatically creating all spools for all customers?
    Thank you very much!

    No luck...
    Maybe is me that can't use these programs...
    Are any programs/transactions that call these ones?
    Even on the program, I can't run it without selecting some fields on the test run...
    I don't understand...

  • Add layout to a custom report

    Hi folks,
    I have developed a custom report from the standard wage type rport (H99cwtr0). However I am unable to copy the report ALV layouts defined for the standard wage report to the custom one. Upon analysis I found it draws the layout  list from the view V_LTDX where the layouts are defined for each report. But this view is 'read-only'. I cannot add a new record for the custom report.
    Any thoughts as how to get the layouts transferred?
    Thanks,
    VG

    L_LTDXDATA contains the ALV fields.
    CALL FUNCTION 'LT_DBDATA_READ_FROM_LTDX'
    EXPORTING
    I_TOOL       = 'LT'
    IS_VARKEY    =  L_LTDXKEY
    TABLES
    T_DBFIELDCAT = L_LTDXDATA
            T_DBSORTINFO =
            T_DBFILTER   =
    EXCEPTIONS
    NOT_FOUND    = 1
    WRONG_RELID  = 2
    OTHERS       = 3.
    (or)
    DATA: disvariant TYPE dvariant.
    i_varkey = dvariant.
    CLEAR i_varkey-type.
    i_varkey-type = 'F'
    CALL FUNCTION 'LT_DBDATA_READ_FROM_LTDX'
    EXPORTING
    i_tool = 'LT'
    is_varkey = i_varkey
    TABLES
    t_dbfieldcat = i_dbfieldcat
    t_dbsortinfo = i_sortinfo
    t_dbfilter = i_filter
    EXCEPTIONS
    not_found = 1
    wrong_relid = 2
    OTHERS = 3.
    Edited by: SAP@AMS on Sep 3, 2009 5:28 AM
    Edited by: SAP@AMS on Sep 4, 2009 11:30 AM

  • Difference between F.35 Receivables amount and FBL5N report open items

    Hi All,
    There is an amount difference between f.35 receivables amount and fbl5n open items amount, I have observed that there are some changes to credit master like risk category and credit representative group, so I thought if we run f.28 it will be right but still difference exits.
    If anybody has come across similar issue or if you have any idea on this on how to analyze, please let me know.
    Regards,
    RK.

    Hi ,
    Please check the time horizon in credit check used. then compare it with FBL5n.
    May be there will be difference in comparison period.
    Program RFDKLI20 or F.28 is to run when there is changes in Assignment from company code, entry in customer master data, entry in sales area data, user exit., currency of credit control area , Assignment of customers to credit accounts.
    And
    Program RVKRED09.--> only the risk class was changed it is sufficient to run
    Regards
    Atul

  • Add field 'asset' in sales order line item account assignment tab

    Hi,
    I would like to add the following field: 'asset' in sales order line item account assignment tab.
    I can enter order, or wbs, but not Asset.
    How can I make this field visable?
    Anybody?
    thanks,
    klundert
    Edited by: Eric Van Zundert on Oct 30, 2010 8:43 AM

    Hi
    There is perform which moves the values to VBAP field.
    This PRCTR field is stored in VBAP (i.e., SO line item table)
    USEREXIT_MOVE_FIELD_TO_VBAP
    Hope it works.
    VVR

  • How to add fields to Structure in Report Painter

    Hi All,
    We have a requiremnt where we need to add 2 fields ( profit center-PRCTR & description-CEPCT-LTEXT ) to structure CCSS. This structure is attached to library 1VK.
    Is it possible to add fields directly to a structure or do I need to create a new structure and attach it to a new library.
    If any one of this is possible, how can I do this ?

    Hi ,
    u can do it in both the ways , but i am not much sure abt second option.
    Useful Tcodes are GR21.
    Regards
    Prabhu

  • [Sales A/R] [Sales Report] [Open Item List] [missing item]

    Dear Expoerts,
    Business One 2005A:
    How to restore or rectify the 'missing item' on the Open Item List?
    There is an item shows Commiited 10 however there is no corresponding Sales Orde.
    Since there is no stock therefore data shows Available -10.
    How can we purge this bug because we tried Goods Issue and Restore, neither methods can do anything about it.
    Your advice will be very much appreciated.
    Kunitomo
    Tokyo, Japan

    Dear Gordon,
    Yes, i'm sure. When i test it, i copy Sales Order (eg. got 5 items - 4 of 5 item is 0 amt)  to Delivery Order (got 5 items - 4 of 5 items is 0 amt). Then i delete the row of 4th & 5th item with 0 amt. 
    FROM Sales order:
    Example: 1) Item A      $1,000.00
                   2) Item B              $0.00
                   3) Item C              $0.00
                   4) Item D              $0.00
                   5) Item E              $0.00
    To Delivery Note:
    Example: 1) Item A      $1,000.00
                   2) Item B              $0.00
                   3) Item C              $0.00
                   4) Item D              $0.00 (Delete row in Delivery Order)
                   5) Item E              $0.00 (Delete row in Delivery Order)
    After i check the Open Item List - the amt, net & tax do not show the figure for this Sales Order. The Sales order just show $1,000.00 in "Original Amount" in Open Item List.
    Please check for me, the SAP B1 system std is like that?
    Thank you.
    Regards,
    Sheon

  • Custom Report - Open Order

    Dear All,
    We are in a Process to Develop certain Z-Reports.
    One of the Z-Reports is Open Order Status, which includes following informations:
    Sales Office--Customer Code-Sales Order No.--Item No.Material Description-Booking Qty--Delivered QtyOpen QtySales Unit of MeasurementRate/ Unit--Total Open Value (Open Qty*Rate)
    Everything is fine, except Two columns, i.e.
    1. Delivered Qty
    2. Sales Unit of Measurement
    The Problem is:
    In Report, we are able to capture the Booking Qty (in terms of Sales Unit).
    For example: If, in Sales Order Booking qty is 20 Months, Report shows 20.000 in Column: Booking Qty.
    But, 5  Months have been delivered, then, instead of 5.000 Report shows 150.000 as in Column: Delivered Qty. Apparently, Column: Open Qty, shows -130.000 as open Qty.
    Also, instead of picking Sales Unit of Measurement as Month, System is showing DAY/ TAG in Column: Sales unit of measurement.
    My second Query is:
    Is there any way to get information from Structure, in to Program? As, I referred few Standard Program (related to Sales UoM and Delivered Qty). In Standard Program, value is getting referred to Structure (say, VBMTV, for example).
    Best Regards,
    Amit

    Hi Amit,
    I guess, you have maintained/Created UoM in CUNI.
    Sales Office(1)--Customer Code(2)-Sales Order No(3).--Item No(4).Material Description(5)-Booking Qty(6)--Delivered Qty(7)Open Qty(8)Sales Unit of Measurement(9)Rate/ Unit(10)--Total Open Value (Open Qty*Rate)(11)
    8 = 6-7
    11= 8*10 ( as you already said)
    UoM_sales, VBAP_VRKME / VBEP_WMENG ( i think it will be fine, if we take Sch.Line order qtty, rather than Item level order qtty/Booking qtty, Delivery qtty LIPSD-G_LFIMG or you can take the same from document flow table too)
    Hope you have done the same as above. or it would be helpful,how you are deriving/extracing the desired values from which tables
    How you are calculating Open Qtty?
    not sure about your second query. Trying to give some input in your first query.

  • Field addition to customized report

    Hello Gurus,
    We have requriement like this,
    We have a reprot which is customozied in R/3 which has  12 fields in which 4 fields are key fields,
    Eg:
    Sales doc,itemno,delivery date and schedule line date are key firleds and in thid the data is getting filed up by customized program. We created the Generic extractor and pulling the data to BI system. Now the customer would like to add the sales employee field for which patner function is the must according to R/3 logic but our problme is sales document number is key fields hence it would be repeated but where as if we are calling the partner function then we will get repaeted sales document number. Please can any one suggest me alternative to add the filed wihtout make any changes t0 R/3 program and internally it is linked with 10 different program which a client does not want to do that... can we enhacement but how to include the vlaues...
    Immediate res

    Hi,
    Just try again creating a database view.
    Which are the tables from which you want to create view.
    Regards,
    Renjith Michael.
    Edited by: Renjith Michael on Jan 11, 2008 5:29 PM

Maybe you are looking for