Add fields to reporting table/structure CCSS

My customer has defined some new fields (Z......) for WBS reporting in table PRPS. They would like to use these fields in report painter reports, but we have not managed to make them available in the library used (6P3). In order to make that happen they must show in the reporting table/structure used (CCSS) I guess? According to SAP there's no "easy way" of doing this, but obviously it should be possible.
Can somebody give ma an idea how this can be done?

Eventually we manage to get the customer defined field to show up as a characteristic in the relevant library. The reason we struggled with this was the defined length of the field. SAP does not accept a characteristic with a defined field length of more than 24 characters (we had 30). We ended up redefining the length of the field directly in include CI_CC1Z.
Edited by: Roar Sørli on Feb 5, 2009 2:52 PM

Similar Messages

  • Custom fields in Report painter in CCSS table

    Hello Experts,
    I am in a processes of developing a report painter with custom fields in the selection screen.
    The custom fields are available in PRPS table.
    With hard difficulties I brought the custom fields in selection screen of the report painter.
    I have added the fields in the structure CI_CC1S
    Everything is fine. But if I enter a value in the custom field, the report is not fetching any data.
    These custom fields are related to the WBS element.
    For example if the value of the CUSTOM field is 'AAA', then I want to retrieve ony the WBS element which has 'AAA'.
    Somewhere I am missing a procedure.
    Could anyone suggest how to achieve this.
    Thanks !!!
    Best Regards,
    Vasanth M

    Any Suggestions

  • Want to add field in standard table control - me21n , me22n , me23n

    Dear All ,
    I have come across a situation where I want to add a field in a standard table control .
    But how to proceed for tht I am not getting .
    In the standad transation me22n in the ITEM  OVERVIEW table control I want to add Curreny field in the table control structure
    i.e MEPO1211 I have append the field in MEPO1211_DATA it is even visible in run time in the structure but not visible in table control and in table control settings also.
    How can I add one more column or some standard procedure to do that. Please suggest .
    Thanks & Regards
    Aryan

    hi,
    If you don't want to access key...then only option is ,you have to search USER Exit or BADi (Try using BADI ME_GUI_PO_CUST) for me22n transaction......to adding the field.
    Regards
    Gaurav

  • Add Image to Report Table

    Hello,
    In my programm i create a word report. In this report exists a table with several parameters. Now I want to add a small Image in each cell, behind the parameters, in the table. How can I add images to a table? I use the Office Report Toolkit.
    Thanks
    MZ

    Hello,
    if you search on the Office report toolkit, I think that you'll find the vi "append image to report.vi".
    Software developer
    www.mcm-electronics.com
    PS: Don't forget to rate a good anwser ; )
    Currently using Labview 2011
    PORTUGAL

  • Add fields to report ME55

    Hello,
    I need to add some fields in reports from transaction ME55
    Can anyone give some details to solve this
    Thanks

    Hello,
    I´ve check program  RM06BF00  but i don´t see any point in this program to add fields.
    i´ve debug  RM06BF00 program, it select all data but it display data using this perform:
    "PERFORM submit(sapfm06b) USING sucomm."
    any idea?

  • Add field to condtion table

    Hi Guys:
    Can any one tell me how to add the field to condition table, I am doing pricing determination setup.
    As I can see in Extend Field Catalog for Condition Tables there are lot of feild exist, but when I at "change condition table" in right column any few field exist in fieldCat, how can I add others.

    Hi,
    See Note 21040.
    Excerpt from Note :
    "The allowed fields for conditions and access sequences are defined in the tables KOMG,
    KOMK and KOMP. The fields in tables KOMK and KOMP can be used for the definition of access
    sequences, and the fields of table KOMG as key fields for condition tables.  A field which is taken
    up into the field catalog from tables KOMK or KOMP is ONLY valid as the definition of access
    sequences and NOT as a key field for condition tables, therefore it does not appear in the selection
    list of condition key field."
    You can however add the new field to the KOMG table by following the instructions on how to add a field to the condition
    technique for pricing in the IMG. You can find the documentation in the IMG at:
    MM -> Purchasing ->Conditions -> Define Price determination process.
    Here, go to 'System Enhancements'. There is also a detailed example to explain the procedure.
    Note 566002 describes the same thing for field PSTYV. Maybe Note 12905 will also help.
    Regards,
    Purnima
    Edited by: Purnima Prem Priyan on Feb 13, 2012 3:33 PM

  • Add field in report Z_ALR_87011963

    hi everybody
    I have to add a field on the selection screen of report Z_ALR_87011963, the field anlz-pernr
    I have made a copy of RABEST_ALV01 but I cant detect where the selection screen is getting populated
    I have added the field in structure CI_REPRAZUGA but apparently this structure i used for output
    does anybody know how to add a field on the selection screen
    thanks for your help

    Hi,
    While copying the standard code
    check all the check boxes in the first screen.
    In the next screen copy all the standard includes to Z includes.
    RASORT14
    RASORT_ALV04
    RASORT_ALV08
    RASORT_ALV10
    RASORT_ALV_DATA_FIELDCAT
    RASORT_ALV_MISC
    RASORT_ALV_PREPARE_TABLE
    RASORT_ALV_TOOLS
    ZRASORT14
    ZRASORT_ALV04
    ZRASORT_ALV08
    ZRASORT_ALV10
    ZRASORT_ALV_DATA_FIELDCAT
    ZRASORT_ALV_MISC
    ZRASORT_ALV_PREPARE_TABLE
    ZRASORT_ALV_TOOLS
    Now the complete prog is with you.
    In the starting lines of prog the selection screen design is done you can add the required field there.
    I think this will solve your problem.
    Reward points if it is helpful......
    Kruthik

  • Intrastat - Add fields in report output - VE01

    Hi Friends,
    I do not see import output  fields like mode of transport, COO, material No, etc in VE01 intrasta report output. Is there any configuration to add required output fileds. In the select laout also we do not have these fields except there in VEIAV table
    early respinse appreciated
    Thanks,

    Hi,
    Your question is already answered here:
    [VE01 -  User exit and BADI ?;
    This can be done through screen exit in SMOD/CMOD enhancement RVEXAKK1
    BR,
    Barna

  • Need query to compare quantites,add fields of 1 table until it = the other

    I am trying to query the Curr_sched and Ship_dd250 tables
    to get the date a shipment was completed
    fulfilling the quantity shipped for the original order.
    The Curr_Sched table gives the original ship date (SCHED_DT)along with the requested quantity (SCHED_QTY).
    C.PIIN C.CLIN C.SCHED_DT C.SCHED_QTY
    D2003 001 19-SEP-2003 20
    D2003 001 30-SEP-2003 10
    D2003 001 28-Oct-2003 205
    D2003 001 29-OCT-2003 6
    D2003 001 31-OCT-2003 6
    D2003 001 31-OCT-2003 6
    D2003 001 28-NOV-2003 300
    D2003 001 29-DEC-2003 48
    (RECORDS CONTINUE FOR NEXT CLIN)
    D2--3 --2 30--------- 3-
    This number is compared to the quantity (QTY_SHIP) of the actual shipment and date the shipment went out (DT_SHP_COMP) in the Ship_dd250
    C.PIIN C.CLIN S.DT_SHP_COMP QTY_SHIP
    D2003 001 17-SEP-2003 20
    D2003 001 10-OCT-2003 10
    D2003 001 28-OCT-2003 6
    D2003 001 28-OCT-2003 6
    D2003 001 28-OCT-2003 6
    D2003 001 28-OCT-2003 155
    D2003 001 14-NOV-2003 100
    D2003 001 21-NOV-2003 100
    D2003 001 25-NOV-2003 100
    D2003 001 15-DEC-2003 98
    (RECORDS CONTINUE FOR NEXT CLIN)
    D2--3 --2 30--------- 3-
    If the C.QTY_SHIP is the same as the S.SCHED_QTY then
    the information is printed to a report as
    *on 19-SEP-2003  an order was placed for 20 items and on 17-SEP-2003 the 20 items were sent
    *same as for 30-SEP-2003 order placed for 10 and on  10-OCT-2003 the 10 items were sent
    C.SCHED_DT DT_SHP_COMP
    19-SEP-2003 17-SEP-2003 --20
    30-SEP-2003 10-OCT-2003 --10
    BUT for an order placed on 28-OCT-2003 for 205 items the first shipment on 28-OCT-2003 only contained 6 items
    so this must be added to a variable and the next record read to see if that amount added to the 6 meets
    the total amount of 205 if not then go on to the next record in the Ship_dd250 until the total is reached.
    *28-OCT-2003 = 6 + 28-OCT-2003 = 6 + 28-OCT-2003 = 6 + 28-OCT-2003 = 155 + 14-NOV-2003 = 100
    *So the total of 205 was reached on 14-NOV-2003 when the quantity shipped total = 273
    *The difference must be retained for comparison to the next quantity request in the Curr_sched for 6 items on 29-OCT-2003
    * So 273 - 205 = 68 minus the 6 = 62 and that number is kept to compare to the next quantity in the Curr_sched
    C.SCHED_DT DT_SHP_COMP
    28-OCT-2003 14-NOV-2003 --205
    30-SEP-2003 14-NOV-2003 --6
    any help, suggestions greatly appreciated Thanks

    I think you didn't tested it, because it's working for this scenario also.
    SQL> select * from tableA;
    PIN   CLIN  SCHDT            QTY
    DAE2  002A  19-SEP-03         20
    DAE2  002A  30-SEP-03         10
    DAE2  002A  28-OCT-03        205
    DAE2  002B  29-OCT-03          6
    DAE2  002B  31-OCT-03          2
    DAE2  002B  21-NOV-03         10
    DAE2  002C  31-OCT-03          6
    DAE2  002C  28-NOV-03         94
    DAE2  002C  29-DEC-03          8
    9 rows selected.
    SQL> select * from tableB;
    PIN   CLIN  SHIPDT           QTY
    DAE2  002A  17-SEP-03         20
    DAE2  002A  10-OCT-03         10
    DAE2  002A  28-OCT-03          5
    DAE2  002A  28-OCT-03        100
    DAE2  002A  28-OCT-03        100
    DAE2  002B  28-OCT-03          7
    DAE2  002B  14-NOV-03          1
    DAE2  002C  25-NOV-03        100
    DAE2  002C  15-DEC-03          8
    9 rows selected.
    SQL> select a.pin,a.clin,schdt,shipdt,qty from
      2  (
      3  select pin,clin,schdt,qty,sum(qty) over
      4  (partition by pin,clin order by schdt rows between unbounded preceding and current row) tqty
      5  from tableA
      6  ) a,
      7  (
      8  select pin,clin,shipdt, lag(tqty) over (partition by clin,pin order by shipdt) pre_qty ,tqty
      9  from
    10  (
    11  select pin,clin,shipdt,sum(qty) over
    12  (partition by pin,clin order by shipdt rows between unbounded preceding and current row) tqty
    13  from tableB
    14  )
    15  ) b
    16  where
    17  a.tqty > nvl(b.pre_qty,0) and a.tqty <= b.tqty and
    18  a.pin = b.pin and
    19  a.clin = b.clin;
    PIN   CLIN  SCHDT     SHIPDT           QTY
    DAE2  002A  19-SEP-03 17-SEP-03         20
    DAE2  002A  30-SEP-03 10-OCT-03         10
    DAE2  002A  28-OCT-03 28-OCT-03        205
    DAE2  002B  29-OCT-03 28-OCT-03          6
    DAE2  002B  31-OCT-03 14-NOV-03          2
    DAE2  002C  31-OCT-03 25-NOV-03          6
    DAE2  002C  28-NOV-03 25-NOV-03         94
    DAE2  002C  29-DEC-03 15-DEC-03          8
    8 rows selected.
    SQL>

  • Table Maintenance - Add field not in table for display

    I have a Z table which has five fields of which one of them is the GL account field. I need to display the description of the account from SKAT-TXT20 also in SM30 so that In SM30 when the user looks at the table, they should be able to see six fields. I can code the PBO / PAI to pull data from the table, but am not sure how to enhance the table control that SAP generates automatically when you generate table maintenance from SE11's Table Maintenance generator so that the sixth field can be displayed.
    Thanks

    Hi,
    I hope below solution will work for your problem:
    to update field based on other fields of the same table follow below path and create a routine.
    go to se11 open the Z-table in change mode > utilities> table maintenece generator- and then
    environment> modification> events....
    then creat routine based on your requirement.
    regards,
    munvar.

  • We need add field to report Gen.Trip data (s_ahr_61016405)

    Hi Experts:
    In this moments we use the report s_ahr_61016405 for admin the Travel Management. But we need know if is posible include a new field whit REGION MAINT DEST in the output.
    Regards, Carlos Puga

    Hi Experts:
    In this moments we use the report s_ahr_61016405 for admin the Travel Management. But we need know if is posible include a new field whit REGION MAINT DEST in the output.
    Regards, Carlos Puga

  • Add fields to report

    Dear ,
    I Want to develop a new report but i'm new in oracle finance and I don't know where can I get the REFRENCE NUMBER Field and the TRANSFER TO GL Field.
    Thanks in advance.
    Yara Soulayman.

    I didnt get ur question clearly by 'Transfer to GL' Field..
    Talk to the users or functional people and find out Apps Screens on which the reports are based on, for e.g, if you need to create a report on all journals posted during the day, ask the user which is the screen he uses to view the Journals. Once you know that, go to Help->Diagnotics->a screen will appear asking for password('Enable Diagnotics Screen', contact Admin if u dont know password)
    Enter Block: SYSTEM
    Fields:last_query
    Also refer eTRM for GL
    Alo visit:
    http://download-east.oracle.com/docs/cd/B11454_01/11.5.9/html/erpdoc.html
    http://www.oracle.com/applications/financials/index.html?catalog.html
    There is some documentation on GL 11i on Appsnet
    Url is : http://www.oracle.com/appsnet/products/financials/docs/general_ledger.html
    Cheers!!
    [email protected]

  • Add Fields dynamically to table control

    Hello Folks ,
    i'm trying to add some filed to standard table control and this require from me to take action of repair (modification ) .
    insted of make repair i consider the option of make an enhancement and dynamically (by code ) add the required fileds to table control .
    is there anyone that know if it's possible or not and how to do this .
    Regards,
    Herzel .

    Hi,
        You can use ALV for input purpose as well. Check out OO ALV programs. SE38 -> BCAlVEDIT* , tons of programs available.
    a) Input from user - In ALV, this is possible
    b) F4 help - Possible with ALV
    Not sure why would you need material number and description in the same column and that too one below another. It is possible with lot of tweaking but still requirement is strange and you need to have at least two rows for the same MATNR, one with the number and other with description.
    Refer the links:
    Re: Adding dynamic columns in Table Control
    Re: Adding dynamic columns in Table Control
    Could anyone tell me how can I add columns in a internal table dynamically?
    Re: Dynamic Table Control
    <b>Reward points</b>
    Regards

  • How to add fields to Structure in Report Painter

    Hi All,
    We have a requiremnt where we need to add 2 fields ( profit center-PRCTR & description-CEPCT-LTEXT ) to structure CCSS. This structure is attached to library 1VK.
    Is it possible to add fields directly to a structure or do I need to create a new structure and attach it to a new library.
    If any one of this is possible, how can I do this ?

    Hi ,
    u can do it in both the ways , but i am not much sure abt second option.
    Useful Tcodes are GR21.
    Regards
    Prabhu

  • Add Fields in S_ALR_87013570

    Hi All,
    I want to add fields in ALV in transaction S_ALR_87013570.
    The way i find is to copy the program but it seems very complicated because of 2 things:
    First one, there are a lot of programs to copy and if a update comes, the copy will not be updated...
    Second one, the program seems to be "mandant (system)" dependent...
    Sorry, i've checked now and the program is not System dependent... There was an "If sy-mandt <> XXX".
    I copy the first part and when i activate it, if i try tu use it in my "test mandant", an error appears and say "Program could only be used in mandant (system) XXX".
    Could somme one tell me how to use this program in other mandant (system) (i try to transfer it with scc1 but don't work)?
    And is there any other way to add fields in report S_ALR_87013570?
    Thanks
    Luis.
    PS: Please, apologize me for my english i'm a spanish boy who live in french country :o)
    Message was edited by: me :o)
            Luis Loredo

    Hi,
    I follow this good topic, but I have two questions :
    - I created me own Z* from standard 6PP2-001 and I would like add just one column but I can't ... only new section or horizontale page are available. Can you explain, a little more, the differentes steps to create column ?
    - In a second time, I'm looking for fill this new column with my own selection. User Exit with structure append on CCSS, I think is the good solution but ... I don't find place for abap customer ... any ideas ?
    By advance, Thank you.
    Ps: sorry for my english ...
    Edited by: AlexDoy on Jul 13, 2011 8:36 AM

Maybe you are looking for