Add fields together

I am rather new at all this, but I am trying to add two fieds together. co_ann_lv and co_sick_lv.
I want it under Total CO Leave, but I don't know where to start.
Thanks.

This is FormCalc. Set the Total CO Leave field to the Change event and use this cript:
Sum(co_ann_lv, co_sick_lv)

Similar Messages

Duplication of attributes in Add Fields dropdown of Advanced Search

I am instantiating a secondary VO twice in the View Criteria. This leads to a duplication of query able attributes in the Add Fields drop down.
Is it possible to override certain method in af:query, and suppress the attributes appearing in the Add Fields drop down.

Unchecking the queryable attribute would remove the attributes from the Add Fields drop down all together. I need to avoid duplication and display the attributes only once.

HOW TO ADD FIELDS OF BSEG-ZFBDT & BSEG-ZBD1T

hi frnds.
currently iam working on SD MODULE I NEED the NET DUE DATE SO HOW TO DO THAT
1 problem plz:
HOW TO ADD FIELDS OF BSEG-ZFBDT & BSEG-ZBD1T
TOGETHER
one is date & other is numeric value so how?
one is date & other is numeric value so how to add this 2 fields
& finally i want to display the o/p in date format dd/mm/year
THANKS IN ADVANCE.

Hi Mahesh,
one of the nice features of ABAP is that it takes care about month/year changes when adding days/month on a date.
ADD lv_zbd1t TO lv_zfbdt.
This should work fine. If not, try to convert zbd1t into an integer first.
To get you preferred date output format try this:
DATA: lv_datestring TYPE string.
CONCATENATE lv_zfbdt+6(2) '/' lv_zfbdt+4(2) '/' lv_zfbdt(4)
INTO lv_datestring.
This isn't tested, but should give you a clue.
Regards,
ok

BDT add fields to standard SAP tabel on BP screen

With this email I would like to report a problem I have with the BDT to show extra fields on a table control in the businesspartner masterdata. I hope you can help me and tell me what I am doing wrong or why I cannot show these new fields.
The SAP Module is FS-CS (Commissions). On the businesspartner there is a tab screen with contractdetails. We want to add two new Z-fields to the table control and we have added these fields to an append structure in the CACS_CTRTBU table. I have put the extra fields to a new fieldgroup and put the fieldgroups on a new view added the view on a new section, defined a new screen and finally added the screen to a new screen sequence. The original screen has now been replaced with the new screen with the extra fields.
In the screenpainter I defined a new screen for the new view by copying the original function group of the original screen together with all functionmodules. I added the new fields of the newly defined fieldgroup to this screen.
I registered the new functionmodules for the events ISSTA, ISDAT and ISDST in customizing for the new defined application.
Within the programme there is a structure used called CACS_S_BUPA1. I have added the 2 new field also to this structure.
If I look in my sourcecode in the PBO then I see that the internal table has stored the values of the new fields together with the values of the original fields.
Still if the screen comes up, the values for the new field are not shown and the old(orignal fields) are shown. The new headers and colomns in the table control for the new fields are visible.
Do you have any idea what the problem might be ?
Kind regards,
Peter Jonker

Thanks for your reply, the tip of the fieldgroup has helped me and my colleague who also had a BDT problem, his problem was that changes on fieldgroup level were not saved. Once he changed to the range 6xx with his fieldgroup the problem was solved.
My problem has been solved too, although I am not sure if it had anything to do with changing the range of the fieldgroups, it probably did.
I had done the whole designing from scratch again, but this time using fieldgroups in the range 6xx. Now it works fine.
Strange thing is that in the SAP Help it says to use fieldgroups in the range 600- 799, while the 7xx range will give you problems. The 900 range, as you suggested, also gave problems. In our case the 6xx range was the right one to use

How to add fields to already loaded cube or dso and how to fill records in

how to add fields to already loaded cube or dso and how to fill it.can any one tell me the critical issues in data loading process..?

This is sensitive task with regards to large volumes of data in infoproviders.
The issue is to reload of data in case of adjusted structures of infoproviders.
Indeed there are some tricks. See following:
http://weblogs.sdn.sap.com/cs/blank/view/wlg/19300
https://service.sap.com/sap/support/notes/1287382

How to ADD field in iview ?

hi,
in portal-iview i want to add a field.
when i go to 'portal-content -> open the iview with right click -> preview' and then
do ctrl-alt-right-mouse click i got to the customizing of the fields.
i know how to HIDE fields there, but i don't know how to add fields ? in the list
of the fields the necessary fields are available, BUT i only have to options:
hide -> YES or NOT PERSONALIZED
any ideas ?
reg, Martin

Gopal,
the root element of this fields does NOT have the option 'decorate'.
it is the quoata overview of ESS : sap.com/ess~quotas
the top of the tree has option 'decorate', but this is above the necessary table where
i select the data.
my adrl is
martin.svik(at)denzel.at
maybe we can 'change' some screenshots where you can send me yours and i can
send you mine to explain it in a better way
reg, Martin

How to add fields to Structure in Report Painter

Hi All,
We have a requiremnt where we need to add 2 fields ( profit center-PRCTR & description-CEPCT-LTEXT ) to structure CCSS. This structure is attached to library 1VK.
Is it possible to add fields directly to a structure or do I need to create a new structure and attach it to a new library.
If any one of this is possible, how can I do this ?

Hi ,
u can do it in both the ways , but i am not much sure abt second option.
Useful Tcodes are GR21.
Regards
Prabhu

How to add fields in a z table

hi experts !
i have to add a new fields to an already existing Z table. how can i add field? do i have to delete all other entries and create new ones so that the entry in the new field also gets created.?
akanksha

Hi,
You have two options to enter data type while creating new field in table.
1. User standard data types i.e. mandt, kunnr etc..to use it u need to press "Predefined type" button present on top of table fields.
2. User custom data elements...this data elements you creates when you want to have data field specified to your required length.
Hope this will help.
Sumit

Add fields to Existing DSO and DS in R/3

Hi Friends,
I have got to change my LO datasource which is running on production, 2lis_va_vatim, i need to add 2 fields to the exisitng DS from Comm Stru, so could anyone point me inthe right direction, Hoow to Add the fields with out disturbing the production,
and the same way i need to cgane my DSO aswell for new fields, please tell me how to meet this.
Thanks,
Kiran.

Hi Kiran,
Before applying your changes in Production do the below steps:
1)run V3 job as immediate, which picks data to delta queue and delete the acive V3 job.
2)run the IP which loads data to BW(Delta IP).
3)Apply your changes to the 2lis_va_vatim and DSO.
i)Do the changes(adding your fields to 2lis_va_vatim and DSO)in DEV and active the 2lis_va_vatim and DSO.(insert this in transports).
ii)first apply the R3 transport and then BW side.
4)from now on wards your 2 fileds will get populated in BW side.
5)Maintain the V3 job for 2lis_va_vatim in R3.
If you need any clarification how to add fields to 2lis_va_vatim and create transport req pelase check the below article.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/2050db8b-9d90-2c10-2980-b13a4b0938f6
Hope this helps.
Regards,
Venkatesh.

Add fields in KOB2 & KSB2 report in selection screen as well as output

Dear All,
I have an issue in which i have to add fields in KOB2 & KSB2 report.
i need to add below fields to KSB2 report.
1) Internal order
2) Vendor
3) Purchasing group
I also need to add profit centre in selection screen for KSB2
Similarly for KOB2 i need to add below fields
1) Cost centre
2) Vendor
3) Purchasing group
I also need to add cost centre as input for KOB2 report.
I have gone through note 325546 "CO line item reports: Creating a user-defined field" which can be helpful.
However i am not sure as to how do i add fields in input screen as required.
Other alternative is to create a Z report however when i try and copy the report both KOB2 & KSB2 call same report "RKAEP000".
I am not able to get as to how do i differentiate the call of different screens when ZKOB2 is called or when ZKSB2 is called.
I could identify " c_item_group" field having different values however i couldnot get a proper logic as to how correct screen can be called based on input
Please suggest .
Thanks,
Ronak

Hi Raymond,
The note 747588 is good as soon as you are adding fields from the same table only.
When I have added additional table into KAEP_SCOVP selection view below COVP (just because the extra fields I need are not in COVP) they will show up in KOB1 as selection criteria, but not getting saved.
Any idea if any ABAP should be regenerated or what extra steps are required when adding more tables into Selection View?
Thank you!

How to add field to the header for FBL5N ALV report

Hi,
I need to add fields to the customer line item display ALV report(FBL5N) header part.Right now there are four fields in the header like customer, company code, name and city, after that I need to add first name last name and phone no. Can any one tell me where exactly I need to add and populate there fields to be appear in ALV output list.
Thanks in Advance
Swapna

Yes I have tried, I have place a break point in that perform but it does not stop. I think that is not the correct place to added and populate fields. That routine is for populate selection screen ranges single and multiple values and parameters only.
Thanks
Swapna

Can you add fields that are manually maintained.

I'd like to be able to add fields to my MAP Toolkit's inventory. For example, adding Asset and Warranty fields, to keep track of this information. I'd be maintaining the data manually, which is fine since it doesn't change very often. Is there a way to extend
the toolkit to include these types of fields?
So far the only solution I've been able to think of is to generate reports, convert the .XLS to .CSV, and then use PowerShell to merge the .CSV with a file containing the static information. This would be quite an undertaking as I'd need either different
scripts, of different logic paths, to deal with the multiple reports available from the toolkit.
Thanks
Jim Winner

The reports are generated using queries that are in stored procedures. I suppose it would be possible to modify the query so that extra columns would be created, but I don't know how you would get the data into MAP.
Please remember to click "Mark as Answer" on the post that helps you, and to click
"Unmark as Answer" if a marked post does not actually answer your question. Please
VOTE as HELPFUL if the post helps you. This can be beneficial to other community members reading the thread.

How to add fields in custom infotype and update its screens

Hi Experts
I want to enhance a custom infotype ( Add some new fields, and add special function on its screen). This custom infotype is created in previous release. is there any way to add fields in infotype? and let system automatcailly modify corresponding screens to add new fields

Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the u2018Employee Infotypeu2019 radio button.
4) Select the u2018PS Structure Infotypeu2019.
5) Click on Createu2026 A separate table maintenance window appearsu2026
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on u2018Allu2019 push button. It takes a few moments.
10) Click on u2018Technical Characteristicsu2019. Infotype list screen appears
11) Click on u2018Changeu2019(pencil) button
12) Select your Infotype and click on u2018Detailu2019 (magnifying glass) button
13) Give u2018T591Au2019 as subtype table
14) Give u2018T591Su2019 as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on u2018Infotype Characteristicsu2019 u2026 Infotype list screen appears
18) Click on u2018Changeu2019 (pencil) button
19) Click on u2018New Entriesu2019
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotypeu2019s infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirementu2026
25) In the PM01 initial screenu2026Select u2018Screenu2019 radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select u2018Layout Editoru2019 and click u2018Changeu2019.
27) Screen default layout appearsu2026here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Donu2019t forget to u2018Activate at every level
i think u have to select CI_INCLUDE while enhanceing the Standrad Infotype

How can i add field to screen exit ?

ver 4.7
trans. me21n
add field in screen exit .
i implement screen exit MM06E005->SAPMM06E->0111
in the layout i try to add field by pressing
button in the toolbar ( dictionary field window ) ,
but when i press "save" in me21n ,
i get message "No data changed".
i choose in the dialog window
field from structure "ci_ekpodb" , field that i already
been add .
thanks .

Hi
You have to implement the exit to import/export the data into/from screen-exit:
EXIT_SAPMM06E_016 and EXIT_SAPMM06E_018
Max

Urgent: Add field in generic data source

Hi,
Could anyone please help me out in resolving the issue to add field from different table in generic datasource.
How can I add it in R/3 data source when a function module was created in ABAP to generate fields from PLPO table?
Whatz the changes has to be done at BW side to map the added field?
<u>Requirement</u>
1) Need one more field in the extractor. Field name is PLAS-LOEKZ. Initially client wanted me to add PLPO-LOEKZ which I added, now he needs the same fields from both the table (PLAS and PLPO).
2)The name of the extractor/structure is ZBW_ROUTINGS_OPERATION
3)Now, we need to add this field (LOEKZ from PLAS) in the function module as well. FM name is: Z_BW_ROUTE_OPERATION_EXTRACTOR. This will be in a SELECT query. We need to add this field in the SELECT statement.
Testing will be done in following steps
1)     Go to Transaction RSA3.
2)     Enter the data source Z_BW_OPERATION_ATTR(not sure about the name though, but it should end with OPERATION_ATTR)
3)     Enter the following details:
EXTTY I
PLNNR 50000032
PLNTY N
4)     Now execute (F8) the transaction.
5)     Click on Display List
6)     In the output, we should be able to see these 2 columns(PLAS-LOEKZ) and (PLPO-LOEKZ)
Please send your valuable suggestions to resolve the issue ASAP as its damn urgent.

Hi,
Here is an overview of the solution -
Use T.Code SE11> ZBW_ROUTINGS_OPERATION. Add your new field (PLAS-LOEKZ) to this table, check, save, activate. Edit your function module, SE37> Z_BW_ROUTE_OPERATION_EXTRACTOR and add your code to look up the correct value of this field LOEKZ from the table PLAS, check, save, activate. (Note that SAP provides a sample function module you can use as a template and customize for your requirements. This sample function module is RSAX_BIW_GET_DATA_SIMPLE.)
Your Generic DataSource Z_BW_OPERATION_ATTR is already created, you dont have to change any settings here. Just regenerate it in RSO2. Now test the extraction for the DataSource in RSA3.
Hope this helps
Sandeep

Add fields together

Similar Messages

Maybe you are looking for