Add from 2 separate tables?

I have a numbers file that has a "sheet" with 3 "tables" under it. I wanted to add 2 numbers from 2 separate tables and put it on the 3rd table? How do I do that? Thanks

My guess is that the best response is : _look at the PDF Users Guide._
Type = in the cell where you want to sum.
click once in the 1st cell to add
type +
click once in the 2nd cell to add
press return
Numbers is fair enough to insert the closing pare.
Yvan KOENIG (from FRANCE mercredi 21 mai 2008 11:50:00)

Similar Messages

SAP GRC 10.1 AMF No data selected when adding duplicate fields from separate tables for configurable data sources

Hi There,
In SAP GRC 10.0, our team had an issue where we could not add duplicate fields from separate table (see ERROR: Select Currency/UoM field for the selected analyzed fields). This was resolved by the SAP Note 1904313/ 1904314 (http://service.sap.com/sap/support/notes/1904313).
We upgraded our system to SAP GRC 10.1 SP05 and could now add the duplicate fields from separate tables. SAP Note 1904313/ 1904314 was part of SAP GRC 10.1 SP03 so it makes sense that we, in a higher version (SP05), would be able to do this.
The issue now is when we add the duplicate fields from different tables and run the Ad-hoc Query to test if the data source works correctly, the No Data Selected warning persists. This means that the data source provides no data for analysis, which is required to write our business rules.
Below is an example:
Basic data source with just one currency reference field EBAN-WAERS.
When you run the Ad-Hoc Query you receive data.
Basic data source with second currency reference field EKKO-WAERS.
When you run the Ad-Hoc Query no data is found.
Please also make reference to the following thread logged by my colleague (ERROR: Select Currency/UoM field for the selected analyzed fields)
Any assistance to receive data with duplicate fields from separate tables will be highly appreciated.
Thanking you in advance.
Regards
Gary Khan

Hi
following are the error messages from dump
hrtText
   There is already a line with the same key.
hat happened?
   Error in ABAP application program.
   The current ABAP program "SAPLCKMS" had to be terminated because one of the
   statements could not be executed.
   This is probably due to an error in the ABAP program.
rror analysis
   You wanted to add an entry to table "\FUNCTION-POOL=CKMS\DATA=T_DYN_CKMLCR",
    which you declared
   with a UNIQUE KEY. However, there was already an entry with the
   same key.
   This may have been in an INSERT or MOVE statement, or within a
   SELECT ... INTO statement.
   In particular, you cannot insert more than one initial line into a
   table with a unique key using the INSERT INITIAL LINE... statement.
rigger Location of Runtime Error
   Program                                 SAPLCKMS
   Include                                 LCKMSF01
   Row                                     226
   Module type                             (FORM)
   Module Name                             DYNAMIC_PERIOD_CLOSING
Source code where dump ocured
222
223           APPEND ht_ckmlpp TO t_add_ckmlpp.
224           APPEND LINES OF ht_ckmlcr TO t_add_ckmlcr.
225           INSERT ht_ckmlpp INTO TABLE t_dyn_ckmlpp.
>>>>           INSERT LINES OF ht_ckmlcr INTO TABLE t_dyn_ckmlcr.
227         ENDWHILE.
Also I guess there is problem with material ledger in R/3 side
I have never worked on material ledger before so dont hav idea of Tcode and tables in SAP R/3 for material ledger.
Thanks
Navneet

Add to Multiple Tables from One Page

Hello,
I am building an application that handles hardware inventory (APEX 4.0). I have an input page that adds data to two or more tables all at once. The page has two forms on it that point to two separate tables. However when I try to run the page, it fails and returns an error:
ORA-06550: line 1, column 437: PL/SQL: ORA-00904: "ORH_LAST_UPDATE_DATE": invalid identifier ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored
     Error      Unable to process row of table IDD_ID_DATA.
So far as i can see within the App, that column is not at issue (I am not even doing anything to it and it is nullable). I have looked into the App itself as well as doing some online research but have found nothing helpful...
So my question is this: Is it possible to add to multiple tables from one page? If so how do I do it?
I am new to APEX so any help would be greatly appreciated!

UPDATE:
I received an email from the APEX Support Team:
"The simple answer is that you will need to manually code the DML (and query) processes if you wish to maintain multiple tables from one page (There is a limit of one table when using the built-in processes).
In order to do this I suggest you delete the processes generated by the wizards and create PL/SQL processes with insert, update, delete statements as necessary. Such coding is not difficult but is more time consuming than when you can use built-in processes."
I have been playing around with PL/SQL code and the end result is this:
begin
     INSERT INTO table1
     VALUES(
          :P2_Item_Field1,
          :P2_Item_Field2);
     INSERT INTO table2
     VALUES(
          :P2_Item_Field1,
          :P2_Item_Field2);
end;
I used this code in a custom PL/SQL Process in the Processing>Processes section of Page Processing and it seems to work fine now. The only downside to this method is if the name of a Page Item is changed the code will also have to be changed. Other than that i have had no problems.

Add records to the physical table from Internal table

Hello,
I am trying to insert the records from IT table to physical table. But, its not inserting. Please let me know how do I add the records to the table zebp_iv_cf_log.
I have used only few fields for example *
After looping I get about 800 records in it_non_ebp tab *
loop at non_ebp_inv.
    it_non_ebp-zspgrv = non_ebp_inv-spgrv.
    it_non_ebp-zspgrq = non_ebp_inv-spgrq.
    it_non_ebp-zspgrs = non_ebp_inv-spgrs.
    it_non_ebp-inv_ref_num = non_ebp_inv-xblnr.
    it_non_ebp-zspgrc = non_ebp_inv-spgrc.
    it_non_ebp-zlifnr = non_ebp_inv-lifnr.
    append it_non_ebp.
    endloop.
    insert   zebp_iv_cf_log from table it_non_ebp[] accepting duplicate keys .
I also tried inserting one by one by putting insert syntex within a loop but, it takes keeps processing.
Shall appreciate the response.
Thks & Rgds,
Hemal
Edited by: hemalgandhi on Jun 12, 2009 6:27 PM

Hi,
for the internal table you are using for appending , you must declare it with the header line option
as
data it_non_ebp type table of zebp_iv_cf_log with HEADER LINE.
or else you can have a separate workarea of type zebp_iv_cf_log
as
data wa_zebp_iv_cf_log type zebp_iv_cf_log.
then the code should be like :
loop at non_ebp_inv.
wa_zebp_iv_cf_log -zspgrv = non_ebp_inv-spgrv.
wa_zebp_iv_cf_log -zspgrq = non_ebp_inv-spgrq.
wa_zebp_iv_cf_log -zspgrs = non_ebp_inv-spgrs.
wa_zebp_iv_cf_log -inv_ref_num = non_ebp_inv-xblnr.
wa_zebp_iv_cf_log -zspgrc = non_ebp_inv-spgrc.
wa_zebp_iv_cf_log -zlifnr = non_ebp_inv-lifnr.
append wa_zebp_iv_cf_log to it_non_ebp.
clear wa_zebp_iv_cf_log .
endloop.
and use
   modify zebp_iv_cf_log from table it_non_ebp accepting duplicate keys .
instead of
   insert zebp_iv_cf_log from table it_non_ebp[] accepting duplicate keys .
Please try out and let me know of you face any problem

I need to add a single field from with_item table . need to write select query with reference to company code , account doc no , fiscal year

I need to add a single field from with_item table . need to write select query with reference to company code , account doc no , fiscal year

Hi Arun ,
Can you explain little bit more ??
what is account doc no?
what are the transactions should be displayed in your output??
-Rajesh N

Add records in table ACCESS from labview by ActiveX

I try to add records in table of database ACCESS by an ActiveX from labview but my programme doesn't work ...
What is the problem ?
I have attached my VI
Thanks in advance
hasna
Attachments:
base1.vi ‏35 KB

On Thu, 11 Jul 2002 08:13:48 -0700 (PDT), Lab Viewer
wrote:
>I saw your previous posts related to ActiveX/Access. I once had the
>same kind of problems. It's not an easy task (without a toolkit)
>because you have to learn the "interface" provided by Access/DAO in
>order to manage what you are trying to do.
>In my case, the best solution it was to follow the Visual Basic for
>Applications examples included in MS Access. Even though you don't
>know VB, don't be afraid. Important is to figure out from that example
>what methods/properties you need to use, the proper order to call them
>and eventually some parameters. You are dealing with the same
>methods/properties in LabVIEW, the difference is that you have them in
>a graphical format instead of text
.You can find these examples by
>going to MS Access help > Index and type DAO objects and then choose
>one to start with (Database, recordset, field =85).
>
>Hope this helps
The examples on NI's website were originally written using the DAO
model, but the latest one was written using the ADO model.
However, I am unable to find either example LLBs on their website
anymore. Maybe they're trying to push their SQL Toolkit.
Along with the VBA help in MS Access, I *highly* recommend the book
ADO Programming for Dummies. Wonderful book. Helped me understand the
VBA help. :-)
Again, if anyone is intersted in VIs using ActiveX that works. He/she
is welcome to email me.
Linda

Working with data from two separate tables

In a report I'm building, I have two tables: "Registration" and "SpecialDates".
In the Registration table has client info specific to an account number. Each account number has a different billing cycle.. either Cycle 1, Cycle 2, or Cycle 3. This is listed for the account number as {Registration.Cyle}. In the SpecialDates table I have three different dates listed for each cycle. So this table looks something like this:
fldCycle          fldPastDueDate
1                     01/11/2010
2                     12/15/2009
3                     1/20/2010
The problem I'm having is I can't link {SpecialDates.fldCycle} to {Registration.Cycle}. I have to somehow make the date from the SpecialDates table show up on the report depending on the value of {Registration.Cycle}. Does anyone have any ideas on how to do this?
Edited by: MarcieHennessy on Jan 27, 2010 7:26 PM

Then I would create a custom table with the Add Command in Data Expert with the following query:
SELECT Field1, Field2, Field3, cast (fldCycle as char(10)) as fldCycle, Field4, Field5, etc
FROM SPECIALDATES
Where you list all the fields from the table you will need in the report, with the link field converted to a string. Then replace the SPECIALDATES table in your linking with the new custom table . Now when you link from REGISTRATION to the new custom table.
Fuskie
Who notes you can rename the custom table to a more recognizable name...

How do I make data from one Table flow into a separate Table

How do I make data from one Table flow into a separate Table in iworks numbers?

Great stuff Yvan,
KOENIG Yvan wrote:
Here you may see the way to transfer the contents of a column of Table A in a column of Table B
I used two kinds of formulas.
In the cell A2 of Table B
the formula is :
=Table A :: $B2
It may be :
=Table A :: $B
Apply Fill Down
Copy paste it in cell A1 which is in a header row.
This formula does its duty but it’s not robust enough and will not survive to a Sort.
This is why in B2, I inserted a more robust formula :
=OFFSET(Table A :: $A$1,ROW()-1,2)
You will find details about the functions used in Numbers User Guide delivered with every copy of iWork ‘08
Yvan KOENIG (VALLAURIS, France) samedi 6 août 2011 17:45:22
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !
The first suggestion was the simple answer I needed,
Thank you

How to summary a field from 2 separate tables but having the same fields

Post Author: thuyvd78
CA Forum: General
Hi, I am getting trouble with creating the summary from 2 separate tables. These tables dont have any link together but they have the same fields, such as: part id, qty, etc. I need to create a report that displays whole the information from these tables and also the summary of total qty field of these tablesAny idea to organize this report? Thank you very much! Thuy

Post Author: thuyvd78
CA Forum: General
Thank you for your help v361.where can I can get the link to download samples for subreport from official website?And can I use FULL INNER query to join these tables. I think this way is much clearer than using subreport but not sure it will work? Thanks Thuy

Add rows from another table

Hi ,
I have a table with 20 records and 10 columns.I want to add columns from another table with out cross join.

As others have said, you need to have some sort of join condition otherwise it is a cross join.
SQL> ed
Wrote file afiedt.buf
1 with T1 as (select 'e' as c1, 2 as c2 from dual union all
2              select 'd', 3 from dual)
3      ,T2 as (select 'x' as c3, 5 as c4 from dual union all
4              select 'y', 6 from dual union all
5              select 'z', 2 from dual)
6 --
7 select T2.c3, T2.c4, T1.c1, T1.c2
8 FROM (select c1, c2, row_number() over (order by c1) as rn from T1) T1
9       FULL OUTER JOIN
10       (select c3, c4, row_number() over (order by c3) as rn from T2) T2
11*      ON (T1.rn = T2.rn)
SQL> /
C         C4 C         C2
x          5 d          3
y          6 e          2
z          2
SQL>This example assigns a row number to each row within each table and then joins using that row number.
(I've assumed the row number should be generated based on the order of the first column of each table, but you can change that as required).
What is the point of your requirement?

Add From Table

Hi,
I upgraded to new release, and when I went the table View the "Add From Table" is gone.
How can I add columns to the view after sync with database changes?
chuck

Hi,
AFAIK, Add from Tables option was never there for a VO (I suppose you mean adding the attributes). VO would be having an option to add an attribute from entity and entity would have an option to add from table.
So, you have first sync your Entity objects with your db table by adding the attributes from table. Then, you need to sync your VO from the entity by adding the attributes from entity.
HTH.
-Arun

Populating from one table cell in one table to another cell in another table - confusing results

Hi, really hope someone can help because I feel like I'm almost there... just not quite!
Here's what I have:
Two tables. One is called 'plantable' - this is an expanding table in so much as the user can click a button and it will add a new empty row. Within this row there is a button to remove the row (working fine), six text field cells where users can add text. Two of these text cells are called 'wb' and 'better' - this is important as they come into play later. There's also a button called 'Send to Review' on the same row.
This button does two things: It adds a new Row in a separate table called 'review table'. 'reviewtable' operates similarly to 'plantable'. It is expanding (so there's an 'add row' button) and each row consists of a remove button which removes that particular row, along with five text field cells - two of which are called 'wb' and 'better'
This is what I would like to happen: The user adds several entries (rows) in the 'plantable'. They have the option of adding one of these rows to the 'reviewtable' - if they do this it will auto-populate the text fields for 'wb' and 'better' in the newly created row in the 'reviewtable'. The user can also go directly to the 'reviewtable' and add a new row (completely independent of the 'plantable') and fill in the text fields as they require.
This is what is actually happening: It all works... apart from the fact that whichever 'add to review' button the user presses in the 'plantable' row, a new row is created in the 'review table' but it always pulls the data from the cells of the top-most row in the 'plantable'. For example, I have a plantable with three rows, a, b, c (each row has an 'add to review' button). Each row has text for the 'wb' and 'better' text cells - say, a-wb, a-better, b-wb, b-better, c-wb, c-better. Even if I click on the 'add to review' button in row c, the reviewtable will always add a new row and populate it with the contents from row a. If I click on the same button again it will add a new row and fill it with the contents of row b. If I keep pressing the button it will add more and more rows but they become blank. Also, if the user has added new rows independently to the reviewtable it won't keep the order, so instead of having a row with empty fields followed by say row a then row b, row a will always come first, followed by row b followed by the empty row. I just want them to be viewed in the order the user has added them to the reviewtable. Not what I want to happen.
Here's my code.
Code for adding a new row to plantable (I think this is correct, but placing it here so you can see):
plantable._planrow.addInstance(0);
Code for adding a new row FROM a row in plantable TO a new row in review table (it also adds a dialogue box before proceeding which is the first two lines of code):
var button = xfa.host.messageBox("You are about to ADD this entry to the REVIEW section. Do you wish to proceed?", "Add to Review Section", 1, 2);
if (button == 4)
{form1.Review.reviewsub.reviewtable._planrow.addInstance(0);
var vCol1 = this.resolveNodes("form1.plan.plansub.plantable.planrow[*].better");
var vCol2 = this.resolveNodes("form1.Review.reviewsub.reviewtable.reviewrow[*].better");
var vCol3 = this.resolveNodes("form1.plan.plansub.plantable.planrow[*].wb");
var vCol4 = this.resolveNodes("form1.Review.reviewsub.reviewtable.reviewrow[*].wb");
for (var i = 0; i < vCol1.length; i ++) {
vCol2.item(i).rawValue = vCol1.item(i).rawValue;
vCol4.item(i).rawValue = vCol3.item(i).rawValue;
Can anyone help me with this please as I don't really understand where I am going wrong.
Many thanks, Sunil

I'm still struggling with this, but have revamped the question and almost got it to work. I've started a new thread with a more succinct question here: always fill out the very last row of a table (which can expand)

Unable to pull data from 2 tables of a database linked to a 2nd database

I have a Crystal V7 Report I'm upgrading to Crystal 10 or 11. It uses the following formula that works (data is in ONE MS Access database containing all three tables):
If {PayrollCalc.qSource}=0 then {AuthorizedWithholding.qDesc
else If {PayrollCalc.qSource}=1 or {PayrollCalc.qSource}= 2 then {UnionBenefitDetail.qUBDesc}
else
If {PayrollCalc.qSource}=4 then "Extra Tax" + {PayrollCalc.qID} else
If {PayrollCalc.qSource}=5 then "Payroll Insurance" else
If {PayrollCalc.qSource}=6 then {PayrollCalc.qID} else
Mid ({PayrollCalc.qID},2 )
The upgraded application software uses TWO SQL 2005 Express databases, replacing the one Access database. PayrollCalc is a table in database A while UnionBenefitDetail & AuthorizedWithholding are tables in database B. The links are left outer joined from PayrollCalc table to each of the others (I've tried all the enforcement options) but the formula no longer works. If I remark out the part of the formula from one or the other of the "extra" tables, then the one still active works great but I can't get both to work in the same subreport. There's no error, I just get a blank returned for the formula. I'm not familiar with using the Add Command so I haven't tried that. Can anyone help me?

I confirmed that the join fields are identical:
PRCalc Table - qConNo=int (32 bit), length 4
PRCalc Table - qID=varchar (byte), length 10
PRCalc Table - qSeg=int (32 bit), length 4
UnionBenefit Table - qUBID=varchar (byte), length 10
UnionBenefit Table - qUBSeg=int (32 bit), length 4
Both of these UnionBenefit fields are left outer joined FROM the PRCalc Table's qID & qSeg fields
Authorized Withholding - qConNo=int (32 bit), length 4
Authorized Withholding - qSeg=int (32 bit), length 4
These two fields are left outer joined FROM PRCalc's qConNo & qSeg fields.
The qDesc & qUBDesc fields that I'm trying to print in the same subreport using the formula that's not working are both varchar (bye), length 50 fields.
I have tried various other joins unsuccessfully. I'm convinced that the left outer join is the correct one to use since neither of the tables from Database B will always have records that match up with those in Database A (PayrollCalc's database). So yes, it appears that the left outer join does not work properly across two databases when more than one table in the 2nd database is used. It works fine if I just use one table from database B & do a separate subreport for the other table.

How to get metadata option list values derived from a table/view using SOAP

I am writing an ASP.NET application that replicates some of the features of the SCS search interface. I have looked at the GET_DOC_METADATA_INFO service and its SOAP output. It has a few missing pieces of information, like the option list values for a field if that fields values are derived from a separate table/view. Some of the fields I am dealing with also make use of Dynamic Control Lists (DCL). Is there a way to get the DCL info using SOAP? I did notice that the dOptionListKey element contains the name of the view from which the option list values will be derived. However, I cannot find a service that takes the view name as a parameter to return the option list values. I have looked in the services reference manual, but I have not had any luck finding what I am looking for.
TIA
- Tyson
Message was edited by: Add the word 'get' to the subject.
Tyson

Hello,
What error you are getting? You code seems to be ok. I have tested below code and working fine
XPathNavigator rTable = MainDataSource.CreateNavigator();
String ddlSectionSelectedValue = Convert.ToString(rTable.SelectSingleNode("/my:myFields/my:ddlSection", NamespaceManager).Value);
One think you can check that keep dropdown value display name and id same.
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

Cartesian of data from two tables with no matching columns

Hello,
I was wondering – what’s the best way to create a Cartesian of data from two tables with no matching columns in such a way, so that there will be only a single SQL query generated?
I am thinking about something like:
for $COUNTRY in ns0: COUNTRY ()
for $PROD in ns1:PROD()
return <Results>
<COUNTRY> {fn:data($COUNTRY/COUNTRY_NAME)} </COUNTRY>
<PROD> {fn:data($PROD/PROD_NAME)} </PROD>
</Results>
And the expected result is combination of all COUNTRY_NAMEs with all PROD_NAMEs.
What I’ve noticed when checking query plan is that DSP will execute two queries to have the results – one for COUNTRY_NAME and another one for PROD_NAME. Which in general results in not the best performance ;-)
What I’ve noticed also is that when I add something like:
where COUNTRY_NAME != PROD_NAME
everything is ok and there is only one query created (it's red in the Query plan, but still it's ok from my pov). Still it looks to me more like a workaround, not a real best approach. I may be wrong though...
So the question is – what’s the suggested approach for such queries?
Thanks,
Leszek
Edited by xnts at 11/19/2007 10:54 AM

Which in general results in not the best performanceI disagree. Only for two tables with very few rows, would a single sql statement give better performance.
Suppose there are 10,000 rows in each table - the cross-product will result in 100 million rows. Sounds like a bad idea. For this reason, DSP will not push a cross-product to a database. It will get the rows from each table in separate sql statements (retrieving only 20,000 rows) and then produce the cross-product itself.
If you want to execute sql with cross-products, you can create a sql-statement based dataservice. I recommend against doing so.

Add from 2 separate tables?

Similar Messages

Maybe you are looking for