Add inline images to mail body in Office 365

Hi:
I am working on C# project for migrating emails to office 365.  I am setting Mime Contents for EmailMessage Object and saving it to Office 365. But its not able to add images in email body.
I am getting popup for 'To always show content from sender' in email header and empty box for the image. Please suggest the solution.
Thanks in advance.

Hi,
According to your post, my understanding is that you want to add more than one email address to existing user in SharePoint Online.
We can add a new Property for user profiles in SharePoint admin center to achieve it.
More information:
http://office.microsoft.com/en-001/office365-sharepoint-online-enterprise-help/add-and-edit-user-profile-properties-HA102772741.aspx
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

Similar Messages

  • Dirsynced user not showing as mail user in Office 365

    Hello,
    We have an environment that has a on premise Exchange 2010 SP3 server. We have created the hybrid configuration with Office 365. Directory Synchronization is enabled.
    At this point we have some on premise users that are showing "Synced with Active Directory" in the O365 portal, but do not have a mail user.
    We are in the midst of performing mailbox migrations to Office 365, and the only way to perform the move to Exchange online is for the user to have a Mail user setup in Contacts on the O365 portal.
    Ive seen other forums with the option of Remove-MsolUser and removing from recycle bin then allowing another synchronization from on premise.
    Ive also read that Microsoft has helped this situation by doing something to the AD Attributes which they do not go into detail about.
    Could someone shed on some light to what could be done to add these users as Mail Users to Office 365 without removing them from Office 365 completely?

    Hi B Penney,
    I helped a customer some time ago with the same problem and in their case, mailboxes had been created because they gave the synced users an Exchange Online License before they had a working Hybrid configuration setup.
    Just deleting licenses did not solve the problem and what I did to solve the problem was:
    Get-MsolUser -UserPrincipalName [email protected] | Remove-MsolUser
    Get-MsolUser -ReturnDeletedUsers -SearchString
    [email protected] | select UserPrincipalName, ObjectId
    Remove-MsolUser -RemoveFromRecycleBin -ObjectId 41856197-e306-46c5-9cab-41dddbdafec7
    Modified an attribute on the user On-Premises and ran Start-OnlineCoexistenceSync
    Martina Miskovic

  • How can you add an image in Mail without being an attachment?

    How can you add an image in Mail without being an attachment?
    In otherwords I'd like to put my logo in the email not as an attachment but as an image.
    Is there a simpel solution to this problem?

    PBN1 wrote:
    How can you add an image in Mail without being an attachment?
    You don't.
    It's not possible. The e-mail protocol is designed for text; anything else has to go as an attachment.
    Different mail clients (such as Mail.app, the mail client bundled with Mac OS X) may have different ways of handling such attachments, but they are still attachments. Each mail client has its own rules and methods, so one may display a picture as if it were in the body of the message, but another client may do something completely different.
    A way of faking it is to format your message in HTML (which is a kind of text). The image is hosted on a remote server, not added to the message; instead, you include a link to it in the body of the message, as you would when building a web page. (This is also what the two tips helpfully provided by X423424X do, except that the link to the image is added in the signature, rather than the body of the message.) What exactly happens to it is, again, at the discretion of the mail client. In my case, for instance, displaying images in HTML messages is turned off, and will stay resolutely off.

  • How do I add SRV record to my DNS for Office 365?

    How do I add the following record?
    Add the SIP SRV record for Lync web conferencing.
    Create a new SRV record.
    In the new record, make sure that the fields are set to precisely the following values:
    Record Type: SRV
    Service: _sip
    Protocol: _tls
    Port: 443
    Weight: 1
    Priority: 100
    TTL: Set this value to 1 hour or to the equivalent in minutes (60), seconds (3600), etc.
    Name: @
    Target: sipdir.online.lync.com
    Save the record.
    Need help ASAP because my clients Email is down when I changed Domain Name Servers to Business Catalyst.
    All Office 365 functions were lost.
    Thank you for some assistance - URGENT,
    Jim Vernon
    Hopegate Software

    Here is an image of the settings that Office 365 says i need to correct in my DNS settings on Business Catalyst:

  • Issue with embading image in mail body

    hi all,
    I want to embade an image in the mail body which im sending using sap.
    I have also tried to search on forum and I got some help which suggested me to use used html coding, I have tried it but the mail is
    thanks

    Hi.,
    First you have to store image in MIME Repository. , then use HTM  type to send mail .,
    check these : [Send Picture in body of Email|Send an picture to body of an email;
    and  [Send HTML mail with image|Re: Send HTML mail with image;
    hope this helps u.,
    Thanks & regards,
    Kiran

  • Add link in the Mail body

    Hi
    i am doing file to mail scenario. i need to add link in the mail how can we do this. i tried TransformBean. but it's not working could u please help me
    Thank you
    Regards
    Sundher

    Hi Sundher,
    Web Blogs on File Scenario:
    /people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
    /people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
    /people/community.user/blog/2006/09/07/email-reporting
    Check the following links:
    these links should help you clear your doubts regarding Configuring a Receiver Mail Adapter and possibly find the cause for your error.
    http://help.sap.com/saphelp_nw04/helpdata/en/6b/4493404f673028e10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/8c/607fe4756b654ab9f420097c29f6e9/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/5d/112d20f6ce6c46ba66afb98d278fbd/frameset.htm
    Ignore the Image part and use this for your file to mail:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6d967fbc-0a01-0010-4fb4-91c6d38c5816
    Hope it will work for you
    Amaresh

  • Is it Possible to Add a Power Pivot Gallery App in Office 365

    Hi,
    I had created a site collection by using Business Intelligence center Template in Office 365(E3 Subscription).
    But I am not able to see Power Pivot Gallery App to Add.
    I tried to find and activate any feature depends on this. But could not find any
    Is there any way to Add?
    Thanks in Advance...

    Power BI is the o365 equivalent of the power pivot gallery in on-premises sp.
    It's an extra opt-in addon (more $) to the regular o365 subscription -
    http://www.microsoft.com/en-us/powerBI/pricing.aspx
    Don't believe it's possible to add a powerpivot gallery app to o365, but might be better to ask @ the o365 forums.
    https://social.technet.microsoft.com/Forums/en-US/home?forum=powerbiforoffice365
    Jakub @ Adelaide, Australia Blog

  • Routing e-mail to CRM (office 365)

    Hi,
    I'm currently working on a project to implement the ERMS functionality to route incoming e-mails to the correct agents, send auto-replies, etc. I've configured everything on the SAP side and when I test it by manually creating an incoming e-mail in transaction SOIN it get's picked up and delivered to the right inbox.
    My problem is the step before this, getting the incoming e-mail to reach our CRM system. I've asked our exchange people to route some of our companies e-mail adresses to our CRM system, but they don't know how to do this. I've tried helping them to find a guide to do this, but haven't been able to find one.
    Another problem is that our company is busy making the move to office 365, where we'll be making use of Exchange Online, which again asks for another way of routing the incoming e-mails to CRM.
    Does anyone have any experience integrating CRM with Exchange Online for incoming (but also outgoing) e-mail and is there some information available that I can share with our exchange people, so I can point them in the right direction?
    Thanks in advance for any replies.

    Hi Alex,
    I recently posted the same question to SAP Support Services (CRM-BTX-GWI), because we're looking for a cloud base solution for both email and back office apps, and they responded with the following:
    "I can confirm Server side groupware currently does not support the Mentioned technologies [Office365 or Google Apps], however Development are investigating these for future releases.  With regards a release data on these , this is unfortunately not currently available."
    In Paragraf 2 can you make the requirement in clear....
    Regards,
    Sap Adherent.

  • Essbase Retrieve add in 9.3 Compatibility with Microsoft Office 365

    Our organization is looking to move to Microsoft Office 365. Is there any compatibility issues with the Essbase retrieve add in version 9.3? ; We also use the In2Hyperion Essbase Ribbon version 3.3. I checked the certification documents, but they do not mention anything about Office 365. I appreciate any assistance with this issue.
    Will

    Office 365 Web Apps are not supported and cannot be supported as there is no platform for add-in's in that environment. http://www.microsoft.com/en-us/download/details.aspx?id=13602
    Most Office 365 uses cases and users end up with Office installed on the desktop and at that point we are talking about normal Office Support. Right now it is up to the Office 365 administrator to determine the version of Office to be used by their 365 users. http://onlinehelp.microsoft.com/en-us/office365-enterprises/ff637585.aspx
    Short answer is that Smart View does not support Office 365 Web Apps and there are no plans to support the Web Apps.

  • Insert an image in mail body

    hi
    i m sending the mail content using smartform
    at the end of the content i want to add a logo
    so i added graphic in my smartform
    but it isnt apearing in the mail
    can anyone  please help me ,

    Hi Sonam,
    Check below thread's if it might helpful to you.
    How to upload logo in Smartforms.
    how to insert logo in smart forms
    Thanks
    KH

  • Can you configure UCCX E-mail settings using Office 365?

    We would like to utilize this feature, but are wondering if this is possible?

    Disclaimer
    The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
    Liability Disclaimer
    In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
    Posting
    Enable Wireless - Access Points - Global Configuration - Global TCP Adjust MSS
    [edit]
    Oops, didn't read enough of your post.  I see you mention you've already enabled MSS and are asking about UDP.

  • Can't add images to announcements in SharePoint-hosted app in Office 365

    I tried something very simple:
    Create a new SharePoint-hosted app
    Add a new list to the app, based on the Announcements template
    Deploy the app to my Dev site on Office 365
    When I now add a new item (aka a new announcement) and try to add an image to the Body field, I encounter two errors (depending on whether I try to add an image from my Computer or from SharePoint)
    Adding from my computer gives me an unexpected error:
    Adding from SharePoint shows me a structure of all the apps in my hostweb, but no way to upload an image either to the hostweb or the appweb:
    Is it not possible to add images to a Rich Text field in a list in an app?

    Hi Rene,
    For inserting any image from you computer to you App web, you need to create a separate picture library in your app web manually i.e. in your SharePoint hosted app add a new list item, under list settings window choose "create a list instance
    base on existing list template" and in the drop down select
    picture library. Now deploy the app and try again.
    Generally when we insert any image from our computer to a SharePoint rich text field, the image gets upload in one of the document libraries, but this option is not available in the newly created app web, as it doesn't contains any separate library..
    For you next error, make sure that in the app manifest you are providing
    read access on the web, this will resolve you second problem.
    Hope it helps you.....

  • Inline image - Mail

    Hi there,
    I have 2 problems with inline image in Mail app.
    1. When I reply an email with inline image, they will be replaced with actually file name such as <image001.jpg>.
    There is option for include image when forward email, but not for reply.
    2. When I send an email with picture(s), it display (in Outlook) as attachment, not inline the body.
    I have also tried with many other mail clients but not success.
    This is really make me crazy, how come other OS (BB, WP,...) can do it while iOS cannot?

    Can anybody help me

  • Want to add text to mail body of  BACS Remittance Advice

    Hi Experts,
    Blelow is the requirement.
    User is sending the remittance advice to vendors, user wants to include a u2018fixedu2019 text also in that mail.
    User is sending remittance advice to vendor in PDF format which is attached in a mail, I need to add some text to mail body.
    But not able to find how mail body is filled up.
    Main program RFFOGB_T u2013 Payment program
    Includes RFFORI06 u2013 Remittance advice
    Can you please suggest how I will be able to add the text to the mail ?
    Regards,
    Subhashree.

    Hi E_Hinojosa ,
    Its helped a lot.
    But one doubt,what is process exit and how to search the same from a program or include.
    The required code(which is there in note) is there in include 06 but which process exit I will use for the BACS remittance and how to fill the value of finaa-mail_body_text in process exit.
    Please give me a clear idea.
    Thanks,
    Subhashree.

  • Embeded image in email body in pl/sql

    Hi, i need to embend images in the email body.
    Someone have an example?
    Thankls

    HI,
    please see my code want to add image in mail body .
    V_CLOB := '<html>
       <head>
         <title>Test HTML with Embedded Image</title>
       </head>
       <body>
         <h1>Test HTML with Embedded Image</h1>
         <p>And here it is:</p>
         <img src="data:image/gpg;base64,';
      get_enc_img_from_tab (922,l_clob);
      insert into ANUP(MAILID)VALUES(blob_to_clob(l_clob));
      V_CLOB := blob_to_clob(V_BLOB) ||'" alt="Site Logo" />
      <p>The end.</p>
      </body>
      </html>';
      /* THIS IF CONDITION DENOTED FOR PLAIN TEXT NOT FOR HTML TEXT*/
      IF V_HTML_TEXT IS NOT NULL THEN
        UTL_SMTP.WRITE_DATA(V_MAIL_CONN, '--' || V_BOUNDARY || UTL_TCP.CRLF);
       UTL_SMTP.WRITE_DATA(V_MAIL_CONN, 'Content-Type:text/html; charset="iso-8859-1"' || UTL_TCP.CRLF || UTL_TCP.CRLF);
        UTL_SMTP.WRITE_DATA(V_MAIL_CONN,V_CLOB);
        UTL_SMTP.WRITE_DATA(V_MAIL_CONN, UTL_TCP.CRLF || UTL_TCP.CRLF);
      END IF;Edited by: BluShadow on 08-Mar-2013 10:44
    added {noformat}{noformat} tags.  Please see {message:id=9360002} and learn to do this yourself in future.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

Maybe you are looking for