Add new field into Standard Adobe Form

Hi Expert,
I'm trying to do a very simple thing (at least that is what i think), we want to have new scenario for PCR (personnel change request). So i copy the standard interface and form (ISR_FORM_SPEG) and add some new field in that form (trough Tcode SFP). The problem is the new field that i added is not showing up any value, i tried to add address or personnel area to the form. What do i miss here? I'm relatively new to this adobe form. Thanks
Regards
Hendri

Hi,
Because I'm new at this i will assume that this problem is just as a matter of binding problem. I've copy the form and interface ISR_form_SPEG to Z.
In interface(TCode SFP) Z_ISR_IF_SPEG there is enty in import like this
position | Type | QISR_TAB_type| | |
In the Z_ISR_FORM_SPEG i drag the interface Position (from import folder) into the context on the right side of screen, in Layout tab i create ISR Text Display, and drag the position into the text display (which i believe is the binding processes). Activate it and save. But no value is displayed when running the iview on the portal (personnel change request), the form show and all label are show too but the value is not showing. Thanks

Similar Messages

How to add new field into dynamic internal table

Hello Expert.
how to add new field into dynamic internal table.
PARAMETERS: P_TABLE(30). "table name
DATA: I_TAB TYPE REF TO DATA.
FIELD-SYMBOLS: <TAB> TYPE standard TABLE.
*Create dynamic FS
create DATA I_TAB TYPE TABLE OF (p_table).
ASSIGN I_TAB->* TO <TAB>.
SELECT * FROM (p_table) INTO TABLE <TAB>.
 here i want to add one more field into <TAB> at LAST position and my
 Field name = field_stype and
 Field type = 'LVC_T_STYL'
could you please helpme out .

Hi,
Please find the code below.You can add the field acc to your requirement.
Creating Dynamic internal table
TYPE-POOLS: slis.
FIELD-SYMBOLS: <t_dyntable> TYPE STANDARD TABLE, u201C Dynamic internal table name
 <fs_dyntable>, u201C Field symbol to create work area
 <fs_fldval> type any. u201C Field symbol to assign values
PARAMETERS: p_cols(5) TYPE c. u201C Input number of columns
DATA: t_newtable TYPE REF TO data,
 t_newline TYPE REF TO data,
 t_fldcat TYPE slis_t_fldcat_alv,
 t_fldcat TYPE lvc_t_fcat,
 wa_it_fldcat TYPE lvc_s_fcat,
 wa_colno(2) TYPE n,
 wa_flname(5) TYPE c.
Create fields .
DO p_cols TIMES.
 CLEAR wa_it_fldcat.
 move sy-index to wa_colno.
 concatenate 'COL'
 wa_colno
 into wa_flname.
 wa_it_fldcat-fieldname = wa_flname.
 wa_it_fldcat-datatype = 'CHAR'.
 wa_it_fldcat-intlen = 10.
 APPEND wa_it_fldcat TO t_fldcat.
ENDDO.
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
 EXPORTING
 it_fieldcatalog = t_fldcat
 IMPORTING
 ep_table = t_newtable.
ASSIGN t_newtable->* TO <t_dyntable>.
Create dynamic work area and assign to FS
CREATE DATA t_newline LIKE LINE OF <t_dyntable>.
ASSIGN t_newline->* TO <fs_dyntable>.
Populating Dynamic internal table
DATA: fieldname(20) TYPE c.
DATA: fieldvalue(10) TYPE c.
DATA: index(3) TYPE c.
DO p_cols TIMES.
 index = sy-index.
 MOVE sy-index TO wa_colno.
 CONCATENATE 'COL'
 wa_colno
 INTO wa_flname.
Set up fieldvalue
 CONCATENATE 'VALUE' index INTO
 fieldvalue.
 CONDENSE fieldvalue NO-GAPS.
 ASSIGN COMPONENT wa_flname
 OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
 <fs_fldval> = fieldvalue.
ENDDO.
Append to the dynamic internal table
APPEND <fs_dyntable> TO <t_dyntable>.
Displaying dynamic internal table using Grid.
DATA: wa_cat LIKE LINE OF fs_fldcat.
DO p_cols TIMES.
 CLEAR wa_cat.
 MOVE sy-index TO wa_colno.
 CONCATENATE 'COL'
 wa_colno
 INTO wa_flname.
 wa_cat-fieldname = wa_flname.
 wa_cat-seltext_s = wa_flname.
 wa_cat-outputlen = '10'.
 APPEND wa_cat TO fs_fldcat.
ENDDO.
Call ABAP List Viewer (ALV)
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 it_fieldcat = fs_fldcat
 TABLES
 t_outtab = <t_dyntable>.

How to add new fields to the system form (Ex.expenses to a/r invoice form)

hi
can any one tell me how to add new fields to the system form (Ex.expenses to a/r invoice form)
i want to add expenses field to system a/r invoice form and connect data base also.
i used the code of samples\11.system form manipulation(vb.net) but i'm not able to get it....so can any one help with code or concepts.
reply soon plz..
thankQ

If I understood you correctly, you are just trying to add new fields to the invoice form and then use them in your form. you should first go and add the field to your tables, which you would do by going to Tool --> User Defined Fields --> Manage User Fields. There are different documents or categories given. For ex. for invoices, Sales Orders you would add your field under the Marketing Documents. If you want the field to be just one per invoice, add it to the Title, otherwise if you want a field per invoice or Sales Order line, add it to the Rows section. Once you have done that then you can just create a edit box or drop down to represent the field and set the datasource for that to your field. If you want example code to do that, let me know.

Add new field to HR PCR forms

Hi All,
We are trying to enhance adobe form for scenario SRQ1.
We want to add some new fields to tha form.
For that we have copied the existing standard form to zform.
We have implemented the zinterface too.
To add new field on form we created as an import parameter in form interface.
We added to context of adobe form and on layout.
But we are not getting that field in 'special_data' table in BADI implementation of SRQ1.
Please let me know how and where we should write a code to add new field in 'special_data' table.
Thanks & Regards,
Nilesh.

Thanks Suresh,
We have added it to characteristics of SRQ1 scenario and it's working.
But now we are facing problem in adding data to additional_data table.
Can you tell us something about it.
Actually in set_additional_values method of BADI we are adding data to additional_data table but on form it is not reflecting.
Please advice.

Can we add new field in standard idoc segment ?

HI all,
My requirement is to add new field in segment named E1EDL44 (Idoc named - DELVRY03).
Please guide me how to proceed.
thanks
manish

Hi Manish,
You cann't add any new fields into any of the standard segments like E1EDL44 segment.
Inorder to achieve this you need to do the following:-
Create a new segment and with the new fields and this new segment should be added as a child segment to the E1EDL44 segment. You need to write a piece of code to populate that new segment in the userexit. You should create a extension for your basic type DELVRY03. This way you can achieve this scenario.
Thanks,
Mahesh.

Modify and add new field in standard Purchase Order script

Hi All,
I have some problem with Modify and add some new fields in Standard Purchase Order script. From ME22n transaction code it display PO detail. In item detail with condition tab all data will display in Currently PO script output.
But I want to display ME22n->Item Detail->Invoice->Taxes Data. how to display this data in standard PO script. All data are fetch from Structure like ( KOMV,KOMVD..etc) then How it can be Display?
Waiting for Replay.
Himanshu Patel.

Work with an Abaper.Tell your requirement [ addition of a field] and ask him to include this field by using the functionality " Field Exit".

Cannot Add new fields to standard QM datasource

Hi
I got this erro when I try to add new fields from LBWE.
Field ZZRFKIMG cannot be selected because of unit field VRKME -> see long text
Message no. MCEX032
Diagnosis
Field ZZRFKIMG cannot be transferred, since its unit field VRKME is either not in the communication structure, or was purposefully excluded from the selection.
Procedure
If you have chosen your own field, you must also create a user-defined unit field in the append and use it accordingly.
How can I resolve it.
thanks

Hi,
My Understanding is that if the field is available in the Pool in LBWE then no need to enhance the datasource.
In my case the field is available in LBWE though it is ZFIELD (ZZRFKLMG and ZZNETPRC).
In RSA6 I added the this unit
ZZMEINS     MEINS     UNIT                                                                           Base Unit of Measure
ZZWAERK     WAERK     CUKY                                                                           SD Document Currency
I went back to LBWE and try to add the following Zfieds (ZZRFKLMG and ZZNETPRC) and the error is same.
Now I try to add the the field directly in the append structure * ZZMC05Q02ITM* but its asking to maintain the ref table and ref field.
I added ZZMC05Q02ITM as ref table and ZZRFKLMG as ref unit and I still get errors.
I am are that if I maintain it in RSA6 then I need to write user exit in CMOD but since it is available in LBWE I want to get it from the pool.
I have tried this and there was no errors during activation
ZZRFKLMG     ZZRQE_RFKLMG     QUAN     QMFE     ZZMEINS     Notification quantity in base units
I gave the table name and Unit.
Despite adding it, I still get data even though I did not used LBWE pool.
thanks alot SUV123
Edited by: Bhat Vaidya on Oct 14, 2009 10:44 AM
Edited by: Bhat Vaidya on Oct 14, 2009 11:06 AM

How to add new field at standard report,?

Hi expert,
How do i find an easy way to add new field using this tcode s_alr_87012332 ?

Hi,
In order to add a custom fields , please chech the enhancement MM06E005.
Here, you can get includes in which you can place ur field.
Hope this helps.

Add new field in standard transaction

Could ou please tell me that can we add material field in standard transaction VF04 selection criteria.
if yes then how?
regards,
Amar

hi Amar,
check this thread
Re: Additional Fields in Selection Screen of VF04 - Billing Due List
it might be helpful to you.
thanks
Sachin

Hide/delete fields from standard Adobe Form FITP_REQUEST_FORM

All dear gurus,
I am new to adobe form. I am working on ess mss. In travel request we are getting the adobe form fitp_request_form.
We have some unwanted fields in the form. Its not interactive .
Either I want to hide or delete those fields from the form. thats it.
How I should start. guide me pls.
Regards,
Namsheed.

Hi Namsheed,
You might need to copy the standard as customized form and you are free to hide / delete any field in the form .
http://scn.sap.com/thread/3578272
Also, you need functional to configure to use this customized form instead.
Thanks.
regards,
Xiang Li

How do I add a field into an existing form in SharePoint Designer 2010 and...?

I'm trying to add an existing field to an existing form in SharePoint Designer 2010. It's a URL to the employee's photo. But each time I try to "Insert as picture" the url to the photo has a trailing comma. Why and more importantly, how do I get
rid of it?
Thanks!

Hello,
See this similar thread:
http://sharepoint.stackexchange.com/questions/10149/comma-in-url-field
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

How to add new fields to standard alv report

Hi,
Tcode(VL10G) .ie.out put list will not showing one new field.I want to add one more field to output list. append the field(VIKP-SDABW) In the SHP_VL10_ITEM structure .And write the logic in the exit LV50R_VIEWG05----
>USEREXIT_PREPARE_LAYOUT_FILL.Please expain what is the process?
Why i have write the code?what logic i will write?
Thanks & Regards,
sairam

FORM ZI004_FIELDCAT_MOULD .
    wa_fieldcat-fieldname = 'ZMLDCDID' .      "Mould Code ID
    wa_fieldcat-tabname   = 'IT_MLDETAILS' .
    wa_fieldcat-outputlen = 40 .
    wa_fieldcat-seltext_l = text-010 .
    APPEND wa_fieldcat TO it_fieldcat.
    CLEAR wa_fieldcat.
    wa_fieldcat-fieldname = 'ZMLDID' .        "Mould ID
    wa_fieldcat-tabname   = 'IT_MLDETAILS' .
    wa_fieldcat-outputlen = 20 .
    wa_fieldcat-seltext_l = text-011 .
    APPEND wa_fieldcat TO it_fieldcat.
    CLEAR wa_fieldcat.
    wa_fieldcat-fieldname = 'ZMLDCODE' .      "Mould Code
    wa_fieldcat-tabname   = 'IT_MLDETAILS' .
    wa_fieldcat-outputlen = 40 .
    wa_fieldcat-seltext_l = text-012 .
    APPEND wa_fieldcat TO it_fieldcat.
    CLEAR wa_fieldcat.
endform.

How to add new fields to standard reports

hi friends,
im into ABAP and working across all modules..the basic thing is users and functional people are not satisfied with the standard reports..they need some logic change or to add some more fieldsinb the standard reports.For logic change we have to copy the standard to zprogram and can do or create a new program itself..but in many cases they ask for extra fields.how to achive it ..
for example my requirement now is adding vendor name field to the report FAGGL03 ....i found a badi and have make changes to it ...now the vendor name will be coming in sgtxt over writing the text ...but they need text also...now what shall i do???
append structure vendor name field in faglposx table ....???how to find out the final internal table from where the output is coming ????
?when we check the standard rewport codes...there are lot of include statements perform statements etc ...how to find out the final structure or internal table which has the output values..???

hi
it would be better if u giv full name of the report
if ur displaying the data in alv then search for the
word REUSE_ALV_LIST_DISPLAY REUSE_ALV_GRID_DISPLAY from which u can get the final table name
then check the data that is comming into
try using implicit enhancement or any other exit in the declaration and declare a new structure with the field and append it to the field catalog
if ur displaying the data using write statement
then create a zprogram and add a write statement
fi ur unable to find here the final table then after displayign the report start the debugging and double click on any row to find out more easily
shiva

Add new field into result of the transaction MD4C

i want more information into the result of MD4C
example:
delivery date of the purchase order and confirmation date of the purchase order and field USR06 of PRPS table and other field like
moving average price VERPR of the table MBEW and other information from SAP table related to purchase order or WBS elements or Order
thanks a lot for reply
best regards
Patrice

User exits and BAdI's for MD4C
Enhancement/ Business Add-in            Description
Enhancement
CO610001               User exits: Assembly processing
M61X0001               User exits PP-MRP materials planning
M61X0002               User Exits PP-MRP Material Requirements Planning Evaluations
Business Add-in
MD_MRP_RUN_PARALLEL         Add-Ins for parallel planning run of requirements planning
MD_PIR_FLEX_CONS            BAdI for flexible planned ind. req. consumption/reduction
MD_PLANNING_RESULT          BADI for Issuing Planning Result
MD_PLANNING_SCENARIO          BAdI for Maintenance of Add. Parameters in Planning Scenario
MD_PLDORD_BOMEX_CIF         BAdI: Deactivation of BOM Forced Explosion in CIF
MD_PLDORD_CHANGE            BAdI for Changing Planned Orders
MD_PLDORD_POST              BAdI: Update of Planned Orders
MD_PLDORD_SCHEDULING          BAdI: Schedule Planned Orders
MD_PLDORD_TIME_STAMP          BADI for publishing time stamp problems
MD_PURREQ_CHANGE            BADI for changing purchase requisitions
MD_PURREQ_POST              BADI for updating purchase requisitions
MD_PURREQ_REL_STRAT         BAdI for Deactivating Release Strategy for MRP Purch. Reqs
MD_STOCK_TRANSFER           BADI: Change the Requirement Date During Stock Transfer
MD_SUBCONT_LOGIC            BADI: Determine Subcontracting Logic
MD_ADD_COL_EZPS             BAdI: Extra Columns for Evaluation PP-MRP Reqmnts Planning
MD_ADD_COL_OVERVIEW         BAdI: Display of Additional Columns in the Material Overview
MD_ADD_ELEMENTS             BAdI for Adding Additional Requirements/Receipts
MD_ALTERN_EXPLOSION         BAdI for Alternative Explosion of Planned Orders (IPPE)
MD_CHANGE_CALENDAR          BAdI: Change Calendar for Range of Coverage Calculation
MD_CHANGE_MRP_DATA          BAdI: Change Data when Importing MDPSX
MD_DISPLAY_ELEMENT          BAdI for Changing Display of MRP Elements
MD_EXT_SUP                  BAdI for Determining the Issuing Storage Location
MD_INTERACT_PLANNING          BAdI for Deactivating Changeability of MRP Elements
MD_LAST_LOT_EXACT           BAdI for Calculating Last Lot Exactly in Individual Segment
MD_MODIFY_PRODVERS          BAdI for Modifying Production Version
MD_MODIFY_SOURCE            BAdI for Modifying Source Determination in MRP
MD_MRP_LIST          BADI for further processing of MRP list
MD_MRP_PARAMETERS           BAdI: Change Planning Parameters

How to add New field in SMART forms.

How to add new field in the SMART FORMS. Please know me the step.
Please help me soon.
Moderator message: Welcome to SCN!
Moderator message: please search for available information/documentation, do not use a priority higher than normal (no "soon", "ASAP", "earliest" etc.).
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Jun 17, 2011 12:31 PM

How to add new field in the SMART FORMS. Please know me the step.
Please help me soon.
Moderator message: Welcome to SCN!
Moderator message: please search for available information/documentation, do not use a priority higher than normal (no "soon", "ASAP", "earliest" etc.).
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Jun 17, 2011 12:31 PM

Add new field into Standard Adobe Form

Similar Messages

Maybe you are looking for