Added Array, Now What?

Forgive my incompetence about adding an array, but all the posts about people losing everything has me apprehensive about restarting the system. I do have stuff backed up, but do not want to create a mess if something goes wrong at this point.
I added a RAID 5 array, filling out the lower half of an Xserve. Raid admin recognizes it under arrays & drives. The arrays are listed under the picture as 1 RAID 5 and 2 RAID 5.
Now what?
Do I just use "Add System" in Raid Admin? (right now it shows one system with an address) or, do I shut everything down, restart and then run disk utility according to the manual?

You should enable journaling. It doesn't affect performance in any meaningful way.
What journaling DOES do is prevent the system from having to run 'fsck' on the disk, should it be shut down uncleanly. On a 1 TB volume, fsck can take an hour (or hours!) to run, and the system cannot finish booting until this time, so what you'll see is that your system appears to "hang" at boot time, and unless you know what's going on and have the patience to wait 1 or 2 or 3 hours until it completes, will probably panic and think your machine is hosed. I've seen it way too many times. Enable journaling, please

Similar Messages

Added Ram, now what?

Okay,
I've recently added 1Gig of RAM... by taking out the keyboard.... the works, but I still feel as if there's more to this than just plugging it into the slot.. What must be done now that I've added the RAM as far as getting the computer to recognize that it's there? -if anything?
Thanks for any help and suggestions.

Thanks for your response.
okay, well, I wasn't sure how to tell, but I opened system profiler, and it shows the RAM there but doesn't show it as active or something like that... I don't recall exactly what the term was that was displayed next to it...
If all else fails, I guess the simplest thing to do is take it out and go through the install process again.

HT5622 In settings it has a spot to add an e mail address to icloud . What does adding one do ? I haven't finished it by verifying through e mail but my phone keeps saying I am using it for icloudin this phone. Ugh now what ?

In settings it has a spot to add an e mail address to icloud . What does adding one do ? I haven't finished it by verifying through e mail but my phone keeps saying I am using it for icloudin this phone. Ugh now what ?

if it's a message coming from your yahoo account, it means that your account has been compromised, not your phone itself. i would suggest changing the password for your email account

HT4623 After ios7 update can't send or receive emails. Have turned off and on, hVe rebooted, have deleted account and adding as new. Now what?

Upgraded to ios7 on iPad 2. Now can't send or receive mail (outlook).
I tried starting and restarting. I tried rebooting. I tried deleting mail account and adding in again. I
Now what do I do?

I think I have solved this problem on m iPad2 by:
1. Reinstalling my email account.
2. Changing the settings on my PC to stop it from deleting my email from the server before my iPad could load them.
My PC uses Windows Air Mail. I made no known changes to my PC from the time I was running iOS6 to the installation of iOS7 ??? MS did come out with several updates this week??
3. In the same time frame when I was scrolling through web pages the Control Bar popped up every third stroke. It is very easy to change the setting of the Wy Fi setting from On to Off while deleting the unwanted Control Panel without any indication. This means that the Wy Fi must be constantly checked to make sure that is ON???
The three problems at the same time have made this the worst mess to fix in 12 years of internet use. The fix has lasted for about 8 hours at this point, Tomorrow will tell.

I keep getting the message You need a newer version of Pages to open this document. but I don't have an update available in app world. Now what?

I keep getting the message You need a newer version of Pages to open this document. but I don't have an update available in app world. I did the update but it doesn't seem to be registering on my macbook pro. Now I can't open any of my documents as I keep getting this message. Now what???

You have 2 versions of Pages on your Mac.
Pages 5 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Note: Apple has removed over 100 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
Peter

Deleted time machine backups in Finder, now what?

I know this was foolish, but I didn't do any research before hand. My external drive had 8Gs left and the Time Machine window said it couldn't backup because it was almost full. I thought it also said something about deleting previous Time Machine backups, so I selected the first 10 or so and put them in the trash. Then when I tried to empty the trash, it took forever (still going right now at 317,996 items to delete). Anyway, my question is, now what? I am not concerned about the older backups but do I need to do anything special for a proper backup of the iMac now? Should I start over or will Time Machine fill in the gaps. I have been searching on the forum but I still don't understand how this works. Any help is greatly appreciated!

photobug mjm wrote:
do I need to do anything special for a proper backup of the iMac now? Should I start over or will Time Machine fill in the gaps. I have been searching on the forum but I still don't understand how this works.
Sorry, I neglected to answer this before.
Assuming there's no damage, or it's repairable, then no, you don't need to do anything more, although you should do a new backup as soon as you're sure the existing backups are ok.
What you've lost is only the backups of any files and folders that existed only at the time of the backups you deleted.
So if those "first 10 or so" were your oldest backups, all you've done is what TM would have done anyway, although perhaps a bit faster. If they were your more recent ones, then you've lost the copies of items that were added or changed after the time of the oldest one still there.
It is a strange concept, and a very powerful system, but let me put it this way: TM will never delete it's copy of anything that's still on your system, or was there at the time of any remaining backup.
You manually deleting them works exactly the same way.
This is the "magic" of the "multi-links" that TM uses. Think of them as multiple, extra-fancy aliases. Every backup contains "links" to TM's copy of every item that was on your Mac at the time of that backup. So a file that's not been changed in a long time will have a whole passel of them; a new file will only have one, or a few. What you deleted were these links; the actual backup copies are only deleted from the TM disk when the last link to it is deleted.
So . . . you may have dodged a bullet!

All Contacts Lost from Computer, then iCloud, now what?

As above, but I had a backup from a month ago, still lost a lot of added things but it could have been worse. I guess you have to back up iCloud / your Address Book with an archive daily.
The problem is that when I import my remaining contacts back into the Addres Book, they disappear after a few seconds and never end up on my iCloud web page at my iCloud account. Now what???
I tried deleting the iCloud account, re initiating, all sorts of things but no joy.
aehaas

Contact applecare. they have procedures for this.

Upgraded to 6.0.2, now get "Firefox had a problem and crashed". Starting in Safe Mode does not help. Now what?

Not sure what version I was running, but it worked fine but I have not been able to get it running again. I have uninstalled and reinstalled with the same results. Have followed the help pages to the point of obtaining the Crash Report... now what?
I did notice the CR seems to think I am running Windows XP but I am actually running Windows 7 (64 bit).

That gives Firefox 6.0.2 Crash Report [@ nsHttpHandler::QueryInterface(nsID const&, void**) ] https://crash-stats.mozilla.com/report/index/d2eddeb0-5845-4c72-987a-ad0282110917
Unfortunately that is not really getting anywhere yet, you could become the first person to file a bug about that particular crash, but that takes a bit of time and testing.
There is a known problem causing firefox 6 to crash and that is the use of IDvault, that can give more than one crash signature, the software developers regarding ID vault are WhiteSky, and are expecting to release a fix in a few days (if they have not already done so)
Have you tried
* using firefox's [[safe mode]]
* disabling all plugins
Does that help, either by preventing crashes or giving another recognised crash signature. You should also ensure all software is up to date, before trying adding extension software back.
The other common cause of crashes is malware, that includes a particular Trojan that is now known to crash Firefox 6. Check out [[is my firefox problem a result of malware]] you will need to do scans using software or sites with up-to-date scanning software, if you do scan for problems say what sites or software you used and the version of software used. Downgrading firefox versions rarely helps with crashes, it may help with the one specific trojan, but the security risks would then remain, potentially causing even more problems because the browser no longer crashes.

While changing app store password i deleted the app store icon. now what???

while changing pass word on my iphone for the app store i deleted the app store icon. now what do i do?

it's not possible to delete build in apps from ios devices
unless one somehow alter the firmware in a jailbraking way
so 1 out of 3 things are likely
1 you put it in some folder and it's still hiding there
2 you remove it by adding it to restrictions in settings->general->restrictions
3 something is rotten in the stake of the Ios firmware memorymap and doing a reboot of the ios device will solve it

Moving my iTunes library - So now what do I do???

I store my music on a Seagate 250GB drive which is now full, so I needed to move my library to my new Seagate 1T external drive. I created a new library [changed library] on the 1T with a few songs from my hard drive, and then used iTunes "add to library' to put library from the 250 GB to the 1T. And I went to bed because it would take a while.
When I woke up, iTunes was frozen about half way through the add, the 250GB library had disappeared, and all the copied folders on the 1T were empty. Plus iTunes couldn't open the library because it was 'locked'. And so I restarted and the result is the 250 GB library is intact, and the 1T has about half the songs copied on to it, and iTunes is working again.
So now what do I do?
1. It would take forever to figure out which folders were not copied, select them, and add them. [it's not like it started with the A's and finished with R's]
2. It would take forever to try adding the 250GB library again, hope it doesn't freeze, and then delete the duplicates.
3. So I am thinking I need to delete the 1/2 library on the 1T, and try adding the 250Gb library again.
Or ................ is there some way to do an add/copy and have iTunes not copy the dulicates ie the ones that are already on the 1T.
Or ............. is there something else I should consider.
thanks

iTunes: How to move your music to a new computer - http://support.apple.com/kb/HT4527
do not confuse moving your whole folder and library with moving just media files as in
iTunes for Mac: Moving your iTunes Media folder - http://support.apple.com/kb/HT1449
Quick answer if you let iTunes manage your music: Copy the whole iTunes folder and all its subfolders and files intact to the other drive. Start iTunes with the option key held down and guide it to the new location of the library.

New hard drive, now what??

HELP! Just had to have a new hard drive on the computer. tried moving itunes........finally got the playlists/etc to work - but, I have many duplications of the playlists (manually deleted those already) and the "date added" is now a new date for every stinkin' song.
a few questions:
***is it possible to have moved the file from old data file to new hard drive, import media into itunes and keep the "date added" that was originally attached to each song?? (or still do that???)
***also, after doing the reinstall and the importing media, I ended up with 3-4 copies of playlists when I opened up my itunes. Manually deleted them, but wondering what I did to get them there in the first place.
***and, now that the songs are there - I can't edit anything as I was able to before. Everything is "gray" and won't let me edit. I tried following the directions (in forum) to change from read only but my computer wasn't agreeing. any tips on how to do this?? the only thing that comes up when I follow the directions is "owner" - none of the other users on the computer. Running Windows 7.
thanks - I appreciate the help - computers aren't my strong-point. this is really frustrating!!

....Right-click on your main iTunes folder and click Properties, then go to the Security tab and click Advanced. Use the Change Permissions... button grant to your account...
Do you get the Change Permissions button? Once you've done that there should be options to add additional users and adjust their permission levels.
tt2

HP "Support" does not know how to perform "regionalization reset", now what?

I buy a dual voltage OfficeJet 4620 in Germany in Ferbruary 2013.
NOWHERE in the product literature does it mention the ink cartridges are regionalized (defeats the purpose of even manufacturing a 110-220v device! But I digress).
I move to Florida in June and yesterday my black ink begins to run out.
The printer needs the "regionalization reset" which can only be performed by HP support, as stated by their own webpage:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02558798
Another description of it here:
http://www.fixya.com/support/t156381-change_region_code_ink_cartridges
I call HP support, and waste over an hour and a half with a girl in the Phillipines until she finally tells me that I need a complete set of USA ink cartridges in order to perfom the procedure (which appears to be not true, you do not need them to reset the printer, but rather it appears you need them simply if you wish to print anything after the reset was performed if for no other reason but to verify that the reset was successful). She claims HP support will call me this morning at 11AM EST. They did not call.
I call HP "Support" at 1130 EST and go through the wickets with them again. This time the girl does not know what to do and is clearly completely unknowledgeable about the product, mush less how to troubleshoot it, and instead she is simply following a script. Another hour wasted. After being put on hold for the 4th or 5th time for 15 minutes, I simply hang up. (Realizing later that this is an intentional strategy.)
I call again. Now I am speaking to some guy in India. He does not know what he is doing either and tries to guide me through the support menu on the printer itself, but his script does not match the menu options on the printer. Back to the 15 minute intervals of hold broken up by him saying "one minute please sir while I verify some information". Another hour wasted, until I finally begin to realize that none of these people know what to do.
Still I call back and get another guy who leads me into the Support menu (press the return button 4 times to access this menu) . The he has me go to the Reports Menu and select the "print mech button tap" option, which prints out a 2 page "Printer Hardware" printout. He asks me to "give him the numbers on the document, but the document has all sorts of numbers on it from serial numbers to product numbers to other numbers with labels that are simply abbreviations. I ask him which numbers he needs from the two pages full of numbers, and back on hold I go for 20 minutes. He comes back and says "the long number, there should be a long number". Well the longest number on the document is the Serial number which I have already given during the initial information polling he did and so I ask him if he needs it again. Back on hold i go for another 20 minutes. Now the 15-20 minute hold cycle resumes, with him "checking something" and he will "be right back". Eventually he simply clicks over to see if I am still on the line and immediately puts me back on hold without saying anything. I put my phone on speaker and I wait him out, having already wasted an entire morning and half my afternoon.
Now this was the best part....HE BEGINS TO PRETEND LIKE HE IS HAVING MICROPHONE PROBLEMS AND CANNOT HEAR ME (yes I know, what does his microphone have to do with hearing me, I had the same thought). It is obvious he has simply either taken his headset off his head or moved the mic far away from his mouth and is pretending he can't hear me and that he will call me back and asks for my number. I ask him how is he going to hear me tell him my number (which by the way he already took at the beginning of the conversation) and he continues his ruse. So I hang up. It is obvious he doesnt know what to do and no one else there is going to help me.
Now I call back tonight around 930PM EST, and I get the Phillipines again. I go trough the whole polling phase with the girl and explain to her that I need the regionalization reset performed, and that all I need is to know which numbers of my printer to give to HP Support so that they can give me the code I need to reset this device. I politely tell her that I understand if she does not know what to do or understand what the procedure is and that I will not be angry with her if she is simply honest and tells me so, but that I want her to tell me if there is anyone there where she works who will definitely know how to do the reset, a supervisor or actual technical advisor, anybody. She is friendly and honest and says this is the frst time she has heard of this and she will ask what to do. Back on hold for 5 or 10 minutes. She claims she is looking in her "resources" for the way to do this. Nothing. I ask her to please stop and get her supervisor, she claims she is checking with her supervisor and that they are "checking the resources" for the procedure to reset regionalization. I foolishly think we are making progress.
After 20 minutes of her constantly telling me she is checking her resources, even after I have told her what the procedure entails and that all she needs to do is find the procedure and tell me which numbers it requires from the device itself in order to provide the reset code, I tell her to stop what she is doing and put her supervisor on the phone. She stalls. She says she is sorry but they have never heard of this procedure before and that she will schedule me a call-back for tomorrow. YEAH RIGHT. I ask her WHO is going to call me tomorrow? She replies that it will be them and that they will have the answer. I tell her that I already heard that from them the night before and I dont have another day to be wasted. I tell her to put her supervisor on the phone and I want the name of whoever is in charge of her office. She tries to ignore me and continues to ask for my phone number (which she already has). I press her for the name of who is in charge and she finally claims "Peter" is the supervisor. I tell her to put "Peter" on the phone. 10 minutes of hold and later a guy picks up the line, claims he is "Peter" and asks how I am doing. I politely say I am well and I ask him for his last name. He asks why I need his last name. i repeat my question, "What is your last name Peter?"..........his reply? "hello, sir? I am having trouble hearing you, can you hear me?" He begins to play with the microphone and puts me on hold. Each time he picks up and asks if I am there I immediately ask him for his last name, to which he resumes the ruse that he cannot hear me. I stay on the line. At this point it appears that HP must have some sort of policy where their "Support" personnel are not allowed to hang up the phone first, perhaps it is even tracked as a half-assed internal method of "Quality Assurance", and these people know it and this is why they will leave you on hold for ever and wait until you hang up. So, I wait Peter out for about 10 minutes, I am not on hold because there is no music, the microphone is simply muted. I tell him i know he is there and can hear me, and that i know he cannot hang up first, and then he promptly hangs up.
SO, my question....
NOW WHAT?
How does anything get escalated at HP when their overseas "Support" doesn't know what to do?
I live in Miami and there is a corporate headquarters there for HP Latin America. I am thinking of walking right into the lobby and finding someone with authority, but in all honesty I just want the d*** printer region reset so I can use these ink cartridges I already bought and opened.
Suggestions?

Hi,http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03149924&cc=uk&dlc=en&lc=en#N89
First, I am sorry to see your experience, however be aware that this forum is a peer-to-peer community and not a direct contact with HP.
To clarify, the product specification do list the ink cartridges regionalization, the specifications itself reffer to HP Suresupply to locate the ink cartridges for your region, as well as the following document which clearly state that information:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03239171&tmp_task=prodinfoCategory&cc=uk&dlc=en...
Firs be sure to have the latest software installed prior contacting HP support, which should be listed as 28
You may find that information listed in the following document (Check the How can I tell which driver version I have? section), if you have any older version be sure to uninstall it and install the latest software, as listed within the same document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03149924&cc=uk&dlc=en&lc=en#N89
If you need, the latest software can be found below:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-108821-3&cc=uk&dlc=en&lc=en...
Next ensure you have any of the 564 ink cartridges, once the printer being reset it require all the 4 ink cartridges to work
Finally check the private messages I sent you prior contacting HP support , the envelope icon at the top-right part of that screen.
The ensure you use the correct contact details lease double chekc it below:
http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How do I Find My Ipad? I have it turned on in the Cloud settings. But now what do I do? How do I get this Find My Ipad software onto my PC computer? How do I actually use it? Thank you. Linda

I have followed the directions - and have downloaded Find My Ipad from Apple Store onto my Ipad2 and enabled the Find My Ipad in the Cloud settings. Now what do I do? No where does it tell me! Not in the user guide, nor any of the help pages. I think I need to put the Find My Ipad in the Cloud - but does this mean in the dropbox? and if so, how do I do that? I tried to drop and drag but it would not do that. I would think I would need to have it on my PC Windows 7 but I cannot figure out how to download the software. Please help. Thank you.

Also, the iPad User Guide is in the bookmarks in Safari on your iPad. It contains the information you're looking for ad much more?
http://help.apple.com/ipad/5/interface/

Lenovo g560 motherboard crash service center not helping now what to do

hi
i have purchase a lenovo g560 laptop on 2 june 2010. after a weak the motherboard get corrupt.now my system is not going to start.
i launch a call on indian head off with call id=4270018809 and they sujjest me to go the service center located at noida.
after going there they put my laptop for 1 week and after 1 weak they are saying we dont have the mother board.and they request to head office for this it will take uncertain time and i can take laptop without getting repaired.now what to do can this laptop get replaced any where help me its urgent.
thank in advance
Solved!
Go to Solution.

call lenovo support line to ship your laptop back to service.
if you have recovery disks, use it instead of shipping back to lenovo.

My itunes wont download the newest ipod software and when i try it will download for maybe an hour then say "error has occured, internet connection timed out" now what do i do?

My itunes wont download the newest ipod software and when i try it will download for maybe an hour then say "error has occured, internet connection timed out" now what do i do?

Disable your firewall/security software, then try again.

Added Array, Now What?

Similar Messages

Maybe you are looking for