Added new field to ALV but not displaying the ouput

Hi guys,
I'm adding one more column to be displayed on an old existing program that uses REUSE_ALV_FIELDCATALOG_MERGE to generate the ALV fieldcat.
DATA : BEGIN OF itab OCCURS 0,
matnr LIKE eina-matnr,
extwg LIKE mara-extw,
matkl LIKE mara-matkl,
mtart LIKE mara-mtart,
maktx LIKE makt-maktx,
lifnr LIKE eina-lifnr,
wglif LIKE eina-wglif,
idnlf like eina-idnlf, " <----
new field
name1 LIKE lfa1-name1,
profl LIKE mara-profl,
END OF itab.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
 EXPORTING
 i_program_name = sy-cprog
 i_internal_tabname = 'ITAB'
 i_client_never_display = ''
 i_inclname = sy-cprog
 i_bypassing_buffer = 'X'
 CHANGING
 ct_fieldcat = t_cat
 EXCEPTIONS
 inconsistent_interface = 1
 program_error = 2
 OTHERS = 3.
I've added in a new field inside the ITAB internal table, but it wouldn't appear in the t_cat, only all the old fields will appear. What have i done wrong?

Hi
Facing similar kind of issue.. added one field to the existing internal table. This is not getting populted by the field catalog merge FM. Tried with the suggested solution also of running programs BALVBUFDEL,
BCALV_BUFFER_DEL_SHARED then logging off and logging in..
But the newly added field is not getting populated. Any suggestions would be of great help.
Regards,
sridevi S

Similar Messages

Adding an image when signing, but not in the signature field, in Reader

Hi,
I would like to know if it is possible to add an image to a pdf document when I sign the document in Reader.
I do not want to add the image in the signature field as a signature, but rather below the signature field. The image is 'n barcode providing me with more information on the signature.
I have looked at the Stamper example, but this functionality is not avialable in Reader.
Thank you,
Magda

If you insert after signing you will break the signature!! You need to do any such stamping BEFORE signing.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Wed, 26 Oct 2011 23:54:15 -0700
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Adding an image when signing, but not in the signature field, in Reader
Re: Adding an image when signing, but not in the signature field, in Reader
created by magdakuit<http://forums.adobe.com/people/magdakuit> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/3992619#3992619

Adding new fields to assignment block, what are the steps to do this.

CRM 7.
Could someone tell me what the steps are to add new fields to specifdic assignment block. Assume that these fields do not already exist in any given structure/table.
My understanding is that I need to use transaction EEWB and then somehow use the component "BSP_DLC_FS" and view "factsheet". But having never used EEWB before I'ma tad lost. I'm in EEWB and have crfeated a project and believe that I now need to create an extension. When doing this I am displayed a box with 4 fields, being: Name, Description, EEW Bus object and Extension type. What are my next steps?
I assume that the EEW bus object is 'BUPA' and the extension type is 'ADD_NEW_FIELDS'. However, how do I know for sure that the EEW bus object should be 'BUPA', bearing in mind that I'm adding new fields to the Account (BP) main address communication data Assignemnt block?.
I wondered if anyone has a link to any guide docuemnt about how to do this?.
Any help would be very much appreciated.
I attempted to use EEWB to add new fields to BUPA but am hitting the error: BDT-DC is Not Prepared for This Application Object
On searching I can see that there are ways around this, via SM30 against table/view V_TBZ1_DC, changing the BDT BC settings, whatever they are. But it gives me a warning when this happens and mentions that only SAP are allowed to do this, but it will allow me to create a transport if I press on past this. Should I need to make this change though, or have I just done something wrong within EEWB I wonder.
Jason

Hi Jason,
You can try using Application Enhancement Tool (AET) to create new fields instead of EEWB,
Best Regards,
Gobinda

Added new field to cube but data not passed from DSO

Hope someone can help.
(BI 7.0) We added new fields into a cube. The fields already existed in the DSO. When we ran the process chain in development for the first time after making this change, we notice that the 'historical' data for these fields is populated in the cube. When we do this in our quality system only new data passed to the cube is updated. In development in the sub-chain DTP request we see all previous requests listed under selections. In quality it is only the latest request. The only difference is that the DeltaInit flag in the DTP request in development is ticked (extraction mode) - but not in quality. Does anyone know whyb this is?

hi peter,
Adding fields to cube doesn't affect delta status...The delta DTP should be able to handle delta requests automatically.
I guess in you quality system, the cube already got all requests updated from ODS before you importing the change request. And in develop system none of the requests in ODS were updated before the change.
Regards,
Frank

New field catalog VOLEH does not display while creating a new table

Dear Gurus,
I added new field as VOLEH in field catalog. However while I am creating a new table, new field (VOLEH) does not showed in field catalog...
How can I fix this error?
Kind Regards,

HI
Check once again in IMG>SD>Basic func>Pricing >Pricing control>define condition table>conditions : allowed fields> go to new entries then press F4
check here newly created field is there or not
(or) when creation of condition table check properly next page button in menu bar
still if its not found
Note 21040 - Allowed Fields not appearing for condition table
or check this link
http://www.sap-basis-abap.com/sd/how-to-add-new-fields-to-field-catalog.htm
Regards,
Krishna.

Adding pictures to a theme, but not in the drop zones...

I don't know if this is a really noob ou really tricky question, but here it goes : )
I'd like to add a/some picture(s) to a iDVD theme, but not in the drop zones. I'd like my pictures to appear as layers, choose whoch one goes in front, and so on...
Is there any way to do that?
Thx, and happy new year ; )
iMac 24' 2,16GHz CodeDuo2 GeForce 7300 GT 1Gh DDR Mac OS X (10.4.8)

In that case you would need to prepare the background as a QT movie exactly the way you want to display it as a background movie and then drag and drop that prepared QT file to iDVD.
I've never done this type of movie in iLife apps alone but I have with FCP & DVD SP which offers these additional video editing options for sizing pip and frames in an existing movie / menu.
Also check the help Menu for iDVD6 (and iMovie) if you haven't already. I did a search for you and here's what I came up with:
Changing the background image of a DVD menu
You can replace the background image in a menu with your own image. Images in menu backgrounds are cropped to fit the standard DVD window size, but the aspect ratio of the original image is preserved. If you want your image to fit the DVD window exactly, first use an image-editing application to resize the image to 640 x 480 for standard video and 854 x 480 for widescreen.
When you replace a background image, you can also choose to keep the drop zones or remove them completely.
Here are ways to change the background image:
Drag a picture file from the Finder or the Media pane to a DVD menu background, outside a drop zone. Before you drop the picture, press the Command key and choose "Replace background" or "Replace background and drop zones" from the contextual menu that appears (shown above). Then release the mouse button.
Click the Menu button and drag a picture file from the Finder to the background well in the Menu pane. If your theme has drop zones, the drop zones disappear.
Click the Media button, then click Photos. Drag a photo from your iPhoto library or another folder to your DVD menu. If your theme has drop zones, the drop zones are retained.
Choose File > Import > Image, locate and select an image, and click Import. If your theme has drop zones, the drop zones are retained.
To remove a background image and return to the default image for the theme, click the Menu button and drag the image out of the background well (shown above).
Hope this answers your question/s.
SDMacuser

Defining field for T021S but not displaying in automated structure

Hi,
I am facing following problem:--
I have define two fields throgh IMG>Finacial accounting>a/c rec. and payable>line item>display line item-->define additonal field
After defining its showing 2 field entries into T021S table and also added two fields into automated generated Structure FAGLPOSYEXT .After moving transport request for these 2 fields for FAGLPOSYEXTinto Quality client ,its not showing thease 2 fields into quality for FAGLPOSYEXT.Infact both field entries showing correctly in Development client as well as quality client for table T021S.
can you please anybody help me out in this.
Many thanks in advance,
Binod K singh.

Hi,
Follow the steps.
1. Delete Setup tables in LBWG.
2. Clear Q in SMQ1/LBWQ.
3. Delete Q in RSA7.
Then fine the ECC correct client for Customizing and there you can do the changes and activate it. If still it is not allowing and you want to add fields by using enhancements then goto SE11, and give MCCOMP and Append Structure and add fiels and write code in CMOD.
Thanks
Reddy

Why is my ipod touch 3g turning on but not displaying the home screen?

my ipod has worked without an issue for 3 years, however yesterday it froze in an app and then displayed the apple icon and then the display turned off. Since then my ipod has been repeatedly attempting to boot up unsucessfully; displaying the apple logo but never going to the home screen. the only way to stop this is to reset it and leave the ipod switched off. Help would be much appreciated

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Field over flow can not display the total and subtotal in ALV

hi
i am running a z report with huge data in quality system.
in 2 columns and not able to show the total and subtotal in 2 columns
it says field overflow and cannot be dispayed.
value is around 20character integer.

You can create a domains with 20 positions and 2 decimal, for example.
Than, associate this domain a data element.
To finish assign that data element to the column you wanna sum.
I hope help.

Adding new fields in Custom Infotype

Hi,
I need to change some fields of Custom Infotype. But project is already gone live for 1 country. will making changes to infotype affect for existing live country?
Safe side....We are thinking Adding new fields in Custom Infotype. & displaying corresponding fields for countries in another tab
& hiding the old tab.
Please let me know procedure for Adding new fields in Custom Infotype for displaying in new tab.
Edited by: Sachin Thigale on Aug 23, 2010 7:04 PM
Edited by: Sachin Thigale on Aug 23, 2010 7:05 PM

Please search. Lot of Threads on this.
Follow these steps.
Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the u2018Employee Infotypeu2019 radio button.
4) Select the u2018PS Structure Infotypeu2019.
5) Click on Createu2026 A separate table maintenance window appearsu2026
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on u2018Allu2019 push button. It takes a few moments.
10) Click on u2018Technical Characteristicsu2019. Infotype list screen appears
11) Click on u2018Changeu2019(pencil) button
12) Select your Infotype and click on u2018Detailu2019 (magnifying glass) button
13) Give u2018T591Au2019 as subtype table
14) Give u2018T591Su2019 as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on u2018Infotype Characteristicsu2019 u2026 Infotype list screen appears
18) Click on u2018Changeu2019 (pencil) button
19) Click on u2018New Entriesu2019
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotypeu2019s infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirementu2026
25) In the PM01 initial screenu2026Select u2018Screenu2019 radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select u2018Layout Editoru2019 and click u2018Changeu2019.
27) Screen default layout appearsu2026here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Donu2019t forget to u2018Activate at every level
i think u have to select CI_INCLUDE while enhanceing the Standrad Infotype
The above details are from the following link
Re: How to add fields in custom infotype and update its screens

Portal favorites not displaying the iview.

Hi Team,
We have a home role with a welcome page which is the first role to be displayed to every user logged in to portal.
Now we have enabled the option "Add to Portal favorites" to the portal objects. So when a report (BI / Bo report) is added to the portal favorites we are able to see the report added to the portal favorites iview. But when we try to access the report directly from portal favorites the link is navigating to the exact report path but not displaying the report instead it is displaying the welcome page of the HOME role.
When i try to add Identity management iview of the User admin to the portal favorites and try to aceess it from Portal favorites iview, it navigates to the identity management page but the welcome page is displayed instead of the identity management iview.
Can you please let me know a fix for this.
regards
Bharat

Hi Team,
Any ideas on this issue will be very helpful
regards
Bharat

0CO_OM_OPA_6: Custom fields added, Data - available in RSA3, but not in PSA

Hi Friends,
I have added some custom fields to the 0CO_OM_OPA_6 data source. Following are the details.
1) Custom fields: ZZEBELN (Purchasing Doc), ZZUSNAM (Username)
2) Code populated in SE19 (BADI for this Datasource)
3) RSA3: Test extraction pulls the records for both the custom fields correctly.
4) RSA5, and RSA6 - Fields are unchecked for hidden and field only. They are made available.
5) Extract Structure replicated into BW and its pulled over from extract structure into Transfer structure.
6) Mapped to corresponding fields in BW update rule and transfer rules. (No routines or formulas exist)/
7) When load extracted into BW, data is blank for both the fields in PSA itself.
Our BW is 7.3 but we still use this datasource as 3.x transfer rules and datasource. In BW, it is connected to the Cube 0OPA_C11 via update rules and 3.x transfer rules only.
Is there any reason for the data being populated into the RSA3, where as not into PSA. Please consider the above points, and let me know if I have done or missing anything here in my steps. I have gone thru several forums and havent got any specific replies for such issues. Have you come across such issues, please share your thoughts and views.
Any of your replies will definitely help. Really appreciate your inputs.
Thanks!!
Prasith

Hi Prasith ,
After reading all the answers , what i feel we are missing a major step ie Re-initialization of the cube .
As you changed the extract structure and added new fields and for this Data source i assume that deltas were running already , the BW system cannot pull these new fields directly from ECC unless you have not done a re-INit again .
The Re-init is pretty simple and not as complex as LO.
I would advise you to re-init for 01.2014 till 016.9999 , run full load and then delatas will flow in later on . Check during the full load if you are able to see these fields in BW in (PSA/ Cube) .
But be careful you need to do Re-init only on week ends when there are no transactions happening else you might end up in duplicate data .
Hope this helps !
Let me know how it goes .
Regards
Zeenath

CRM PCUI (Imp): Adding new fields & Webpage display in ODC1

Hi Gurus,
Plz help in these PCUI related configurations:
Query 1.
PCUI: Adding custom created field in a new TAB (BSP Iview)
Steps Done
a. Custom field defined in an object (say Opportunity)
b. An event created.
c. A Group Tab Page created
d. A Field group created and a new field name added to the field group (What structure need to be added to this field group?)
e. Entry made in Application Layout for an application i.e. event / position / screen element / tab page / structure. (Again what structure to be added?)
To handle this new field & tab, plz advice
1. What needs to be entered in the screen structure? Do we need to create this structure?
2. The required the model access class defined for the screen structure.
3. Any changes required in the controllers
(Where is the linking between custom field defined in the opportunity object and the new field entry made in the filed group)
Query 2.
Calling a webpage in a tab (ODC1, Detail area)
Opening a webpage in an iview can be done easily by reating a URL iview.
If the requirement is to open a web page in ODC1, than what are the steps required for the same?
e.g. On clicking a user defined tab the webpage should open in the detail area 1.
Query 3.
We have extended an object (say field addition in opportunity header) through EEWB
Will the added filed be available in PCUI screen also?
Regards,
SAURABH

Hello SAURABH,
welcome to the SDN Community. Please do not crosspost:
<a href="https://forums.sdn.sap.com/thread.jspa?threadID=66550&messageID=707519">CRM PCUI (Imp): Adding new fields & Webpage display in ODC1</a>.
Regards
Gregor

Opening a new file in photoshopcc and the file name is displayed but no white working canvas. you can see it as a layer in the layers panel and if i draw on the grey area i can see int on the layer but not on the main screen.

opening a new file in photoshop cc and the file name is displayed but no white working canvas. you can see it as a layer in the layers panel and if i draw on the grey area i can see int on the layer but not on the main screen.

Graphics card is the problem.
Trying to update drivers now.
Thanks for your help
john

Is the retina display for the new mac book pro worth the extra cost? I'm buying a new mac book pro but not sure about the retina display.

Is the retina display for the new mac book pro worth the extra cost? I'm buying a new mac book pro but not sure about the retina display.

There is a US$10 adapter from old power adapter to new MacBook Pro.
MagSafe to MagSafe 2 Converter
The MagSafe to MagSafe 2 Converter allows you to use the MagSafe connector on your LED Cinema Display, Thunderbolt Display, or MagSafe Power Adapter to charge your MagSafe 2-equipped Mac computer.
For battery life, check the latest Software Update for the fix for most problems.

Added new field to ALV but not displaying the ouput

Similar Messages

Maybe you are looking for