Added values in Matrix Footer

Hi To All,
How to display the sum of values in matrix footer.For example,
Inventory -
> Goods Receipt
Here, the values of the TOTAL column will got added and displayed in the FOOTER of the MATRIX.
Same like that i want to add some values and that values should be displayed in matrix footer.. How to do this..?

There are 2 ways how to achieve it:
1. if the matrix is filled with query, use UNION with sum() clause
2. or use edittext under matrix and set there sum values - app. 6 months ago here was some example with code how to achieve it and link it to matrix (columns width, ...)

Similar Messages

Hi all Added values in Matrix Footer

hi all,
i want to add sum of column value in the footer of the matrix so please give me some hint for that.
Thanks in adava.
Regards
Rajkumar Gupta

Hi,
Keep a textbox below the matrix column. In the lost focus of the column, give the following code
Case SAPbouiCOM.BoEventTypes.et_LOST_FOCUS
Dim Sum As Integer
For lnnRecCount = 1 To Mat.RowCount
If Mat.Columns.Item("colTotal").Cells.Item(lnnIntORecCount).Specific.value (not equal to) "" Then
Sum = Sum + Mat.Columns.Item("colTotal").Cells.Item(lnnRecCount).Specific.value
End If
Next
DB.SetValue("U_TL", DB.Offset, Sum)
Here "U_TL" is the alias name of the textbox which you had kept below the matrix

How to set default value in matrix column

Hi all,
Does any one know how to set a default value in matrix column ?. I just want , when an event right click and add row. so i set a default value in a column field for example 'Test'. FYI the matrix is in the UDO.
so my code will be like this
If pVal.ItemUID = "Matrix" And pVal.MenuUID = "1292" Then
                    Try
                        Dim oColumn As SAPbouiCOM.EditTextColumn
                        Dim matrix As SAPbouiCOM.Matrix
                        matrix = oForm.Items.Item("Matrix").Specific
                       oColumn = mat.Columns.Item("Code").specific
                        oColumn.Value = "Test"
                    Catch ex As Exception
                        Debug.Print(ex.Message)
                        Debug.Print(ex.ToString)
                    End Try
                End If
I have run it and when i right click and add row it still can not set the default value in one of the matrx column.
does any one know how to solve it. thanks in advance

Hi Bodhi
Sandeep is right you can set value using SetValue() function
If pVal.ItemUID = "Matrix" And pVal.MenuUID = "1292" Then
                    Try
                        Dim matrix As SAPbouiCOM.Matrix= oForm.Items.Item("Matrix").Specific
                        oForm.DataSources.DBDataSources.Item("UDT").Clear()
                        matrix .AddRow()
                        matrix .FlushToDataSource()
                        With form.DataSources.DBDataSources.Item("UDT")
                                .SetValue("UDF", matrix .RowCount - 1, "Test")
                        End With
                        matrix .LoadFromDataSource()
                    Catch ex As Exception
                        Debug.Print(ex.Message)
                        Debug.Print(ex.ToString)
                    End Try
End If

"Date Added" values changed to be identical in some folders

Hi,
I normally sort my work files (mostly .ppts) by "date added" to help me keep track, this usually works fine. I have the date added column showing in Finder and set the Folder Options to sort by date added.
I noticed today that in some folders (but not all) the date added value has been re-set by the system to be a random date (eg 30 Jan 2015 15:28 for one folder), and the date and time added is the exact same for all the files. Obviously this means I can't sort them anymore. I was wondering why this has happened and if it can be fixed as it's a really annoying and potentially serious issue.
Running Yosemite 10.10.2 on a mid-2012 MBP.
Thanks

Hi Subha,
You can assing default values to the Variables...Fiscal Year2008; Version100...etc. so that the user need not input all the variables.
I am not sure whether you can assign a function--"on selection" of variables. For better control It would be prudent to advise users to execute a function (if need be embed a SAVE function with in the sequence) on press of a button.
Regards
Srinivas

Remove row from table when adding values to another table

hi am adding value programticaly how can i remove the row i just add from the table
this is how am adding value
public void addMember(javax.faces.event.ActionEvent actionEvent) {
List<String> tempTable = new ArrayList<String>();
//Code to get the bindings for TargetVO :
RowKeySet selectedEmps = getEmpTable().getSelectedRowKeys();
Iterator selectedEmpIter = selectedEmps.iterator();
DCBindingContainer bindings =
(DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding empIter = bindings.findIteratorBinding("UserDetailsViewVO1Iterator");
RowSetIterator empRSIter = empIter.getRowSetIterator();
while(selectedEmpIter.hasNext()){
Key key = (Key)((List)selectedEmpIter.next()).get(0);
Row currentRow = empRSIter.getRow(key);
onRowCreate(currentRow);
boolean b = selectedEmps.remove(currentRow);
i what to clear the row i just selected from the table
AdfFacesContext.getCurrentInstance().addPartialTarget(empTable);
// empTable
public void onRowCreate( Row currentRow ) {
BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
//access the name of the iterator the table is bound to.
DCIteratorBinding dciter = (DCIteratorBinding) bindings.get("addmemberBeanIterator");
//access the underlying RowSetIterator
RowSetIterator rsi = dciter.getRowSetIterator();
//get handle to the last row
Row lastRow = rsi.last();
//obtain the index of the last row
int lastRowIndex = rsi.getRangeIndexOf(lastRow);
/*check if the user is added already*/
/*OperationBinding oper2 = (OperationBinding) bindings.get("check if user exists method binding");
oper2.getParamsMap().put("attributeName1", uniqueUserAttributeValue);
Object ret = oper2.execute();*/
//create a new row
Row newRow = rsi.createRow();
String f = (String)currentRow.getAttribute("Firstname");
String s = (String)currentRow.getAttribute("Surname");
String u = (String)currentRow.getAttribute("Username");
String n = (String)currentRow.getAttribute("Emailaddress");
// String orgid = (String)currentRow.getAttribute("Organisationid");
newRow.setAttribute("firstname", f);
newRow.setAttribute("surname", s);
newRow.setAttribute("name", u);
newRow.setAttribute("emailaddress", n);
// newRow.setAttribute("Organisationid1",orgid);
//initialize the row
newRow.setNewRowState(Row.STATUS_INITIALIZED);
//add row to last index + 1 so it becomes last in the range set
rsi.insertRowAtRangeIndex(lastRowIndex +1, newRow);
//make row the current row so it is displayed correctly
rsi.setCurrentRow(newRow);
System.out.println("Username " + u);
System.out.println("firstname " + f);
System.out.println("surname " + s);
System.out.println("email " + n);
// refereshpage();
// return null;
am in jdevloper 11.1.1.6.0
my table is
public void onRowCreate( Row currentRow ) {
BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
//access the name of the iterator the table is bound to.
DCIteratorBinding dciter = (DCIteratorBinding) bindings.get("addmemberBeanIterator");
//access the underlying RowSetIterator
RowSetIterator rsi = dciter.getRowSetIterator();
//get handle to the last row
Row lastRow = rsi.last();
//obtain the index of the last row
int lastRowIndex = rsi.getRangeIndexOf(lastRow);
/*check if the user is added already*/
/*OperationBinding oper2 = (OperationBinding) bindings.get("check if user exists method binding");
oper2.getParamsMap().put("attributeName1", uniqueUserAttributeValue);
Object ret = oper2.execute();*/
//create a new row
Row newRow = rsi.createRow();
String f = (String)currentRow.getAttribute("Firstname");
String s = (String)currentRow.getAttribute("Surname");
String u = (String)currentRow.getAttribute("Username");
String n = (String)currentRow.getAttribute("Emailaddress");
// String orgid = (String)currentRow.getAttribute("Organisationid");
newRow.setAttribute("firstname", f);
newRow.setAttribute("surname", s);
newRow.setAttribute("name", u);
newRow.setAttribute("emailaddress", n);
// newRow.setAttribute("Organisationid1",orgid);
//initialize the row
newRow.setNewRowState(Row.STATUS_INITIALIZED);
//add row to last index + 1 so it becomes last in the range set
rsi.insertRowAtRangeIndex(lastRowIndex +1, newRow);
//make row the current row so it is displayed correctly
rsi.setCurrentRow(newRow);
System.out.println("Username " + u);
System.out.println("firstname " + f);
System.out.println("surname " + s);
System.out.println("email " + n);
// refereshpage();
// return null;

hi,
make the table selection single and use this links 4 ur task.
http://www.baigzeeshan.com/2010/06/deleting-multi-selected-rows-from-adf.html
http://deepakcs.blogspot.com/2013/01/ejb-dc-deleting-multi-selected-rows.html
https://forums.oracle.com/thread/2534813
https://blogs.oracle.com/jdevotnharvest/entry/iterating_selected_rows_in_an
txs

Module Pool for displaying the Grid values in Matrix format

Hi Experts,
I have one requirement which as follows,
In Module pool program i need to display the Grid Values in Matrix format i.e,
Row = Color
Column = Size
Like what we can see in Sales order or Purchase Order if you click Grid Entries Button.
Can you Please Help me out.
Thanks n Advance.
Logu

Hi
the sources ate the function groups WMMB and WMMA.
In a new release you should find the function module MGW_UTILITIES_MATRIX_SHELL_RA
the report RWRFMATCHARVAL is a good example
Regards
Björn

Module Pool to Display the Values in Matrix Format

Hi Experts,
I have one requirement which as follows,
In Module pool program i need to display the Values in Matrix format i.e,
Row = Color
Column = Size
Can you Please Help me out.
Thanks n Advance.
Logu

create your internal table dynamically (with number of columns corresponding to number of sizes)
this is done easily with class CL_ALV_TABLE_CREATE method CREATE_DYNAMIC_TABLE
then use the internal table for ALV output

Can values in matrix cells flow across the pages (Reports 6i)?

Hi,
I have to display more than 1000 char in a matrix cell. The report errors out when the values in the matrix cells exceeds the page. Can values in matrix cells flow across pages?
any help on this?
Thank You,
-- Raja

As far as to make the report work, developing the query accordingly using UNION does help.
But my question is still not answered and no replies as well.
So I think, Two frames with print direction as down and One frame with print direction as Across is not possible.
Regards
Arif

Error message when adding values to another table

hi i have a situation where am adding values from a view to a bean,my use case is i have a list of user in my view where am adding them to my bean by clicking the button,but now i what to validate when adding a user in such a way that if i added a use in my bean and i try to add that user again in current selection i must have validating error saying the user have been added already my code is
Edited by: adf0994 on 2012/12/13 2:19 PM

looks like you should have asked this in the ADF-forum...
JDeveloper and ADF
Why don't you simply configure the user name beeing unique in your entity?
ADF would raise an exeption for you.
public String onRowCreate( Row currentRow ) {
return null;
}Don't do that.
returning a literal null is almost ever a mistake! In this certain case you should declare you methods return type as void and ommit the return statement.
bye
TPD

Matrix Footer

Hi to All,
I had created a user screen with matrix..The matrix contains the calculation part..All the values of the particular column should be added and it should be displayed in the footer area of the matrix..(For Ex)
MainMenu --> Reports --> Query Generator --> Queries
Here, if v give any query for system form, it vl display the result in matrix. In the footer area of the matrix a control vl be there which seems like a button(But it vl be flat) in that the sum of particular column will be displayed..Like this i want to do in my user screen..Whether its possible.....

Sridhar,
the same way as in system forms it isnt possible. There is a lot of thinks that in sbo forms are but with sdk you cannot achieve it.
This problem was discussed here many times, try to search in history of forum for matrix double header.

How to Write values in matrix and add Rows

hi all,
i am having a problem in retrieving values
for Combobox in Matrix.
one more thing is i am not able to write to the Matrix
even after adding rows by using oMatrix.Add()
pls help me
if possible any sample code of linking columns to datasource and popping values in combobox.
Regards
om

Om,
You may want to look at the samle code that comes with the SAP Business One 2005A SDK with respect to the DI API. There is a sample that shows entering a sales order in an external VB.Net app and the populating a sales order rows and header in Business One. This may five you some help.
..\Program Files\SAP\SAP Business One SDK\Samples\COM DI\VB.NET\05.OrderAndInvoice
HTH,
Eddy

Include a display value in HTML footer

hi guys,
I am trying to make a report and i included a HTML footer in the report for signatues ,now i have a value in the same page i want it to be included in the report besides the "rceptionest Signautre"it can be ??can i include a value from the page to be displayed in HTML footer ???anybody can help me
this is the code
 
 
<table border="0" width="696" id="table1" >
 <tr>
 <td width="315" style="border-left-width: 1px; border-right-width: 1px; border-top-width: 1px; border-bottom-style: solid; border-bottom-width: 1px" style="text-align: left">
 Patient Signature: </td>
 
 <td width="371" style="border-left-width: 1px; border-right-width: 1px; border-top-width: 1px; border-bottom-style: solid; border-bottom-width: 1px" style="text-align: left">
 Receptionest Signature:</td>
 </tr>
</table>

Hi NightCabbage ,
I have a report that it will be printed from the receptionest i included space at the bottom of the report in the page footer
like this one Receptionest Signature
by using HTML code as following :
 
 
<table border="0" width="696" id="table1" >
 <tr>
 <td width="315" style="border-left-width: 1px; border-right-width: 1px; border-top-width: 1px; border-bottom-style: solid; border-bottom-width: 1px" style="text-align: left">
 Patient Signature: </td>
 
 <td width="371" style="border-left-width: 1px; border-right-width: 1px; border-top-width: 1px; border-bottom-style: solid; border-bottom-width: 1px" style="text-align: left">
 Receptionest Signature:</td>
 </tr>
</table>
and i have a display value that displays the cashier name ,how can i add the the cashier name from the display value into the html code to be displayed besides the signature
help me plesase,
Thank you in Advance,
Ahmed ,

Display value in matrix

hi ,
i created matrix in screen painter. it includes 3 columns unit of measurement, length, width.
i want to set values to length and width manually.
when the form is loaded the length and width should appear in matrix
Regards,
Puneeth

Hallo,
use the form_load event - here's a c# snippet:
if (pVal.EventType = SAPbouiCOM.BoEventTypes.et_FORM_LOAD && pVal.FormType == insertformtype && pVal.BeforeAction = false)
((SAPbouiCOM.EditText)((SAPbouiCOM.Matrix)(oForm.Items.Item("mtxUID").Specific)).Columns.Item("colUID").Cells.Item(insertrow).Specific).Value = "1";
insertformtype = FormType of the form (like AR Invoice 133)
mtxUID = matrix itemUID
colUID = column UID
insertrow = the row you want to change the value
lg David

To set a value in matrix cell which is linked

In sales order if I enter form no of TAX TAB as "form c" , each cell of the TAX Code column of the matrix of contents tab should be set the value as "CST". I have tried to set the value, but it is showing "Form item not editable". I have tried to make the cell as editable but still the error message is coming and it is not setting the defined value. How can this be solved?
Thankx in advance

Hi Priya Manoj
Some notes you can find on this [Thread: Set Value in Itemcode in Purchase Order Form|Set Value in Itemcode in Purchase Order Form;.
There are I has posted some examples in vbcode.
Hope the notes can help you.
Regards
Sierdna S.
Edited by: Sierdna S on Oct 22, 2008 9:45 AM

Adding values for a single customer

Hi Everybody,
I am facing a programming issue. I have to do something like this:
For a each customer, for all open items for that customer, I have to add the amount due at every period in aging in Accounts receivable. So for example, if I have two customers: A and B and
A has 5 open items
B has 3 open items
for each open item there is an amount due for both customers. So what i have to do is add for A 1+2 = amount 1.
amount 1 + 3 = amount 2, amount 24 = amount 3, amount 35 = amount 4.
Similarly for B also I have to do the same thing. Right now my amount are getting added up into one single value at each line of the table. So for all customers it is just getting added in every row of the table and not seperately for every new customer.
Can somebody suggest something or give some example?
Please help.
Thanks & regards,
AM

I'm not sure I understand what you are trying to do. Is it something like:
REPORT ztest.
TABLES: bsid.
PARAMETERS p_bukrs LIKE bsid-bukrs.
SELECT-OPTIONS s_kunnr FOR bsid-kunnr.
DATA: BEGIN OF itab OCCURS 0,
 bukrs LIKE bsid-bukrs,
 kunnr LIKE bsid-kunnr,
 under_30_amt LIKE bsid-dmbtr,
 under_60_amt LIKE bsid-dmbtr,
 under_90_amt LIKE bsid-dmbtr,
 over_90_amt LIKE bsid-dmbtr,
 END OF itab.
DATA: under_30_date LIKE sy-datum,
 under_60_date LIKE sy-datum,
 under_90_date LIKE sy-datum,
 over_90_date LIKE sy-datum.
under_30_date = sy-datum - 30.
under_60_date = sy-datum - 60.
under_90_date = sy-datum - 90.
over_90_date = sy-datum - 30.
SELECT bukrs kunnr bldat dmbtr
INTO CORRESPONDING FIELDS OF bsid
FROM bsid
WHERE bukrs = p_bukrs
 AND kunnr IN s_kunnr.
CLEAR itab.
MOVE: bsid-bukrs TO itab-bukrs,
 bsid-kunnr TO itab-kunnr.
IF bsid-bldat > under_30_date.
 MOVE bsid-dmbtr TO itab-under_30_amt.
ELSEIF bsid-bldat > under_60_date.
 MOVE bsid-dmbtr TO itab-under_60_amt.
ELSEIF bsid-bldat > under_90_date.
 MOVE bsid-dmbtr TO itab-under_90_amt.
ELSE.
 MOVE bsid-dmbtr TO itab-over_90_amt.
ENDIF.
COLLECT itab.
ENDSELECT.
LOOP AT itab.
WRITE: /001 itab-bukrs,
 itab-kunnr,
 itab-under_30_amt,
 itab-under_60_amt,
 itab-under_90_amt,
 itab-over_90_amt.
ENDLOOP.
Caveats
I'm not sure what date you should use for aging. I used the document date. Maybe it's the baseline date. Maybe it's something else.
Collect is inefficient. You might want to do it another way.
I may be way off base - you may be doing something else entirely.
Rob

Added values in Matrix Footer

Similar Messages

Maybe you are looking for