Hi all Added values in Matrix Footer
hi all,
i want to add sum of column value in the footer of the matrix so please give me some hint for that.
Thanks in adava.
Regards
Rajkumar Gupta
Hi,
Keep a textbox below the matrix column. In the lost focus of the column, give the following code
Case SAPbouiCOM.BoEventTypes.et_LOST_FOCUS
Dim Sum As Integer
For lnnRecCount = 1 To Mat.RowCount
If Mat.Columns.Item("colTotal").Cells.Item(lnnIntORecCount).Specific.value (not equal to) "" Then
Sum = Sum + Mat.Columns.Item("colTotal").Cells.Item(lnnRecCount).Specific.value
End If
Next
DB.SetValue("U_TL", DB.Offset, Sum)
Here "U_TL" is the alias name of the textbox which you had kept below the matrix
Similar Messages
-
Hi To All,
How to display the sum of values in matrix footer.For example,
Inventory -
> Goods Receipt
Here, the values of the TOTAL column will got added and displayed in the FOOTER of the MATRIX.
Same like that i want to add some values and that values should be displayed in matrix footer.. How to do this..?There are 2 ways how to achieve it:
1. if the matrix is filled with query, use UNION with sum() clause
2. or use edittext under matrix and set there sum values - app. 6 months ago here was some example with code how to achieve it and link it to matrix (columns width, ...) -
Hi to All,
I had created a user screen with matrix..The matrix contains the calculation part..All the values of the particular column should be added and it should be displayed in the footer area of the matrix..(For Ex)
MainMenu --> Reports --> Query Generator --> Queries
Here, if v give any query for system form, it vl display the result in matrix. In the footer area of the matrix a control vl be there which seems like a button(But it vl be flat) in that the sum of particular column will be displayed..Like this i want to do in my user screen..Whether its possible.....Sridhar,
the same way as in system forms it isnt possible. There is a lot of thinks that in sbo forms are but with sdk you cannot achieve it.
This problem was discussed here many times, try to search in history of forum for matrix double header. -
How to set default value in matrix column
Hi all,
Does any one know how to set a default value in matrix column ?. I just want , when an event right click and add row. so i set a default value in a column field for example 'Test'. FYI the matrix is in the UDO.
so my code will be like this
If pVal.ItemUID = "Matrix" And pVal.MenuUID = "1292" Then
Try
Dim oColumn As SAPbouiCOM.EditTextColumn
Dim matrix As SAPbouiCOM.Matrix
matrix = oForm.Items.Item("Matrix").Specific
oColumn = mat.Columns.Item("Code").specific
oColumn.Value = "Test"
Catch ex As Exception
Debug.Print(ex.Message)
Debug.Print(ex.ToString)
End Try
End If
I have run it and when i right click and add row it still can not set the default value in one of the matrx column.
does any one know how to solve it. thanks in advanceHi Bodhi
Sandeep is right you can set value using SetValue() function
If pVal.ItemUID = "Matrix" And pVal.MenuUID = "1292" Then
Try
Dim matrix As SAPbouiCOM.Matrix= oForm.Items.Item("Matrix").Specific
oForm.DataSources.DBDataSources.Item("UDT").Clear()
matrix .AddRow()
matrix .FlushToDataSource()
With form.DataSources.DBDataSources.Item("UDT")
.SetValue("UDF", matrix .RowCount - 1, "Test")
End With
matrix .LoadFromDataSource()
Catch ex As Exception
Debug.Print(ex.Message)
Debug.Print(ex.ToString)
End Try
End If -
SSRS How to pass subtotal value in matrix into another table just for display?
Hi all,
I have two matrix with subtotal for two grouping. I need to pass the value of this two group subtotal into another matrix table to display and perform simple calculation to get the differences.
How can I pass the subtotal amount into the other matrix?
In Crystal report I can define two variable where i can set the total to the value and call the two variable anywhere in the same report. But how can I do it in SSRS?
Appreciate can help
Thank youYes, basically both are same grouping, i just want to capture the subtotal for comparision with scenario 2.
I can do it in SQL, but if possible, I hope to do it in report. Thank you
Simulation as below
Matrix for scenario 1
Group 1
Detail
Detail
Subtotal Group 1
9999
group 2
Detail
Detail
SubTotal Group 2
8888
Matrix for scenario 2
Group 1
Scenario2
Scenario 1
Differences
Detail
Detail
Subtotal Group 1
2000
9999
2000-9999
group 2
Detail
Detail
SubTotal Group 2
3000
8888
3000-8888 -
"Date Added" values changed to be identical in some folders
Hi,
I normally sort my work files (mostly .ppts) by "date added" to help me keep track, this usually works fine. I have the date added column showing in Finder and set the Folder Options to sort by date added.
I noticed today that in some folders (but not all) the date added value has been re-set by the system to be a random date (eg 30 Jan 2015 15:28 for one folder), and the date and time added is the exact same for all the files. Obviously this means I can't sort them anymore. I was wondering why this has happened and if it can be fixed as it's a really annoying and potentially serious issue.
Running Yosemite 10.10.2 on a mid-2012 MBP.
ThanksHi Subha,
You can assing default values to the Variables...Fiscal Year2008; Version100...etc. so that the user need not input all the variables.
I am not sure whether you can assign a function--"on selection" of variables. For better control It would be prudent to advise users to execute a function (if need be embed a SAVE function with in the sequence) on press of a button.
Regards
Srinivas -
All my plat list have vanished, and all of my library has been duplicated and triplicated and some have 4 copies. i looked to try and delete the copied ones and tried to delete by putting on when they had been added. the date came up 11th march 2013 for ALL of the songs!. my library is at least 4 years old, and i constantly add songs. so why would it come up that date? and why have all my play list dissapeared?(I think also on that date) please help?
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be renamed as iTunes Library.itl to restore the library to a recent state.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
I've noticed more of these missing library posts of late and a common factor since I started asking is AVG Anti-Virus. It seems it might be at least part of the reason why the library file disappears. Try excluding the iTunes folder from any real-time scanning process.
Reverting to an earlier version of your library may clean up the duplicates issue along with restoring the original date added values. If you still have real duplicates I have a tool that might be able to help...
tt2 -
Get all the values from a multiple select in a multipart form
Hi there!
I am using a form with enctype="multipart/form-data" in order to upload files from the form.
I have read this page: http://commons.apache.org/fileupload/using.html and everything works well for my form.
The only problem is that I can't get all the values from a "multiple select" html object. I get only one value.
Using servlets I have used this method:
public java.lang.String[] getParameterValues(java.lang.String name) But now I have enctype="multipart/form-data" in my form and I can't use this way...
Is there a way to get all the values of a multi-valued parameter?
Thanks a lot!
StefanoHi
I have got solution for this problem so, I am listing here logic
assume tag name of html
<select name="moption" multiple="multiple">
iterate it in as
String moption="";
boolean cnt=true;
while(itr.hasNext())
FileItem fi=(FileItem)itr.next();
if(fi.isFormField())
if(fi.getFieldName().equals("moption"))
if(cnt==true)
moption=fi.getString();
cnt=false;
else
moption=moption+","+fi.getString();
If wants more help then mail me your problem
at [email protected]
Thanks!
Anand Shankar
Edited by: AnandShankar on 6 Nov, 2009 12:54 PM -
How Can I get all the values of a DBMS package?
Hi all
I'm using this "dbms_output.put_line(DBMS_DB_VERSION.VERSION || '.' ||DBMS_DB_VERSION.RELEASE);" to show the version. But how Can I get the all the values from DBMS_DB_VERSION ? Is there a common way ?
Thanks .
Best
LaurenceHi,
Don't think that's possible. Even if it were, you wouldn't be able to use/display BOOLEAN type in SQL.
If you just aim to see what they are, you could do something like this
select text
from all_source
where owner = 'SYS'
and name = 'DBMS_DB_VERSION'
and type = 'PACKAGE';Or even
select dbms_metadata.get_ddl('PACKAGE', 'DBMS_DB_VERSION', 'SYS') from dual;My version is:
SQL> select * from v$version where rownum = 1;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
1 row selectedIn 11g you also have [PL/SCOPE|http://download.oracle.com/docs/cd/E11882_01/appdev.112/e10471/adfns_plscope.htm#ADFNS02203] which might help you even more.
Regards
Peter -
How can i get all these values in single row with comma separated?
I have a table "abxx" with column "absg" Number(3)
which is having following rows
absg
1
3
56
232
43
436
23
677
545
367
xxxxxx No of rows
How can i get all these values in single row with comma separated?
Like
output_absg
1,3,56,232,43,436,23,677,545,367,..,..,...............
Can you send the query Plz!These all will do the same
create or replace type string_agg_type as object
2 (
3 total varchar2(4000),
4
5 static function
6 ODCIAggregateInitialize(sctx IN OUT string_agg_type )
7 return number,
8
9 member function
10 ODCIAggregateIterate(self IN OUT string_agg_type ,
11 value IN varchar2 )
12 return number,
13
14 member function
15 ODCIAggregateTerminate(self IN string_agg_type,
16 returnValue OUT varchar2,
17 flags IN number)
18 return number,
19
20 member function
21 ODCIAggregateMerge(self IN OUT string_agg_type,
22 ctx2 IN string_agg_type)
23 return number
24 );
25 /
create or replace type body string_agg_type
2 is
3
4 static function ODCIAggregateInitialize(sctx IN OUT string_agg_type)
5 return number
6 is
7 begin
8 sctx := string_agg_type( null );
9 return ODCIConst.Success;
10 end;
11
12 member function ODCIAggregateIterate(self IN OUT string_agg_type,
13 value IN varchar2 )
14 return number
15 is
16 begin
17 self.total := self.total || ',' || value;
18 return ODCIConst.Success;
19 end;
20
21 member function ODCIAggregateTerminate(self IN string_agg_type,
22 returnValue OUT varchar2,
23 flags IN number)
24 return number
25 is
26 begin
27 returnValue := ltrim(self.total,',');
28 return ODCIConst.Success;
29 end;
30
31 member function ODCIAggregateMerge(self IN OUT string_agg_type,
32 ctx2 IN string_agg_type)
33 return number
34 is
35 begin
36 self.total := self.total || ctx2.total;
37 return ODCIConst.Success;
38 end;
39
40
41 end;
42 /
Type body created.
[email protected]>
[email protected]> CREATE or replace
2 FUNCTION stragg(input varchar2 )
3 RETURN varchar2
4 PARALLEL_ENABLE AGGREGATE USING string_agg_type;
5 /
CREATE OR REPLACE FUNCTION get_employees (p_deptno in emp.deptno%TYPE)
RETURN VARCHAR2
IS
l_text VARCHAR2(32767) := NULL;
BEGIN
FOR cur_rec IN (SELECT ename FROM emp WHERE deptno = p_deptno) LOOP
l_text := l_text || ',' || cur_rec.ename;
END LOOP;
RETURN LTRIM(l_text, ',');
END;
SHOW ERRORS
The function can then be incorporated into a query as follows.
COLUMN employees FORMAT A50
SELECT deptno,
get_employees(deptno) AS employees
FROM emp
GROUP by deptno;
###########################################3
SELECT SUBSTR(STR,2) FROM
(SELECT SYS_CONNECT_BY_PATH(n,',')
STR ,LENGTH(SYS_CONNECT_BY_PATH(n,',')) LN
FROM
SELECT N,rownum rn from t )
CONNECT BY rn = PRIOR RN+1
ORDER BY LN desc )
WHERE ROWNUM=1
declare
str varchar2(32767);
begin
for i in (select sal from emp) loop
str:= str || i.sal ||',' ;
end loop;
dbms_output.put_line(str);
end;
COLUMN employees FORMAT A50
SELECT e.deptno,
get_employees(e.deptno) AS employees
FROM (SELECT DISTINCT deptno
FROM emp) e;
DEPTNO EMPLOYEES
10 CLARK,KING,MILLER
20 SMITH,JONES,SCOTT,ADAMS,FORD
30 ALLEN,WARD,MARTIN,BLAKE,TURNER,JAMES
CREATE OR REPLACE FUNCTION concatenate_list (p_cursor IN SYS_REFCURSOR)
RETURN VARCHAR2
IS
l_return VARCHAR2(32767);
l_temp VARCHAR2(32767);
BEGIN
LOOP
FETCH p_cursor
INTO l_temp;
EXIT WHEN p_cursor%NOTFOUND;
l_return := l_return || ',' || l_temp;
END LOOP;
RETURN LTRIM(l_return, ',');
END;
COLUMN employees FORMAT A50
SELECT e1.deptno,
concatenate_list(CURSOR(SELECT e2.ename FROM emp e2 WHERE e2.deptno = e1.deptno)) employees
FROM emp e1
GROUP BY e1.deptno;
DEPTNO EMPLOYEES
10 CLARK,KING,MILLER
20 SMITH,JONES,SCOTT,ADAMS,FORD
30 ALLEN,WARD,MARTIN,BLAKE,TURNER,JAMES
CREATE OR REPLACE TYPE t_string_agg AS OBJECT
g_string VARCHAR2(32767),
STATIC FUNCTION ODCIAggregateInitialize(sctx IN OUT t_string_agg)
RETURN NUMBER,
MEMBER FUNCTION ODCIAggregateIterate(self IN OUT t_string_agg,
value IN VARCHAR2 )
RETURN NUMBER,
MEMBER FUNCTION ODCIAggregateTerminate(self IN t_string_agg,
returnValue OUT VARCHAR2,
flags IN NUMBER)
RETURN NUMBER,
MEMBER FUNCTION ODCIAggregateMerge(self IN OUT t_string_agg,
ctx2 IN t_string_agg)
RETURN NUMBER
SHOW ERRORS
CREATE OR REPLACE TYPE BODY t_string_agg IS
STATIC FUNCTION ODCIAggregateInitialize(sctx IN OUT t_string_agg)
RETURN NUMBER IS
BEGIN
sctx := t_string_agg(NULL);
RETURN ODCIConst.Success;
END;
MEMBER FUNCTION ODCIAggregateIterate(self IN OUT t_string_agg,
value IN VARCHAR2 )
RETURN NUMBER IS
BEGIN
SELF.g_string := self.g_string || ',' || value;
RETURN ODCIConst.Success;
END;
MEMBER FUNCTION ODCIAggregateTerminate(self IN t_string_agg,
returnValue OUT VARCHAR2,
flags IN NUMBER)
RETURN NUMBER IS
BEGIN
returnValue := RTRIM(LTRIM(SELF.g_string, ','), ',');
RETURN ODCIConst.Success;
END;
MEMBER FUNCTION ODCIAggregateMerge(self IN OUT t_string_agg,
ctx2 IN t_string_agg)
RETURN NUMBER IS
BEGIN
SELF.g_string := SELF.g_string || ',' || ctx2.g_string;
RETURN ODCIConst.Success;
END;
END;
SHOW ERRORS
CREATE OR REPLACE FUNCTION string_agg (p_input VARCHAR2)
RETURN VARCHAR2
PARALLEL_ENABLE AGGREGATE USING t_string_agg;
/ -
How to get all the values in the Select-option.
Hi,
I got the select-option field so_week, for eg. If I give 200923 to 200926 (year and week) in the selection screen and then I need to pass this value (200923) to the FM 'ZWEEK_GET_FIRST_DAY' to get the first day of the week.
My question is how can i get all the values from the select option, (i.e) i need to get 200923, 200924,200925, 200926.
Regards,
Anbu.Hello,
I will prefer Max's solution. But just for the sake of this req.
i need to get 200923, 200924,200925, 200926
i am proposing my soln:
DATA: V_WEEK TYPE RSCALWEEK.
SELECT-OPTIONS: S_WEEK FOR V_WEEK NO-EXTENSION OBLIGATORY.
AT SELECTION-SCREEN.
DATA:
V_COUNT TYPE I,
V_ADD TYPE I,
RT_WEEK TYPE RANGE OF RSCALWEEK,
RS_WEEK LIKE LINE OF RT_WEEK.
V_COUNT = ( S_WEEK-HIGH - S_WEEK-LOW ) + 1.
DO V_COUNT TIMES.
RS_WEEK-SIGN = 'I'.
RS_WEEK-OPTION = 'EQ'.
RS_WEEK-LOW = S_WEEK-LOW + V_ADD.
APPEND RS_WEEK TO RT_WEEK. "RT_WEEK--> Will contain the week values
CLEAR RS_WEEK.
V_ADD = V_ADD + 1.
ENDDO.
@Max: I was stupid enough not to think of your solution. Need to leave office
Cheers,
Suhas -
How to get all the values from the dropdown menu
How to get all the values from the dropdown menu
I need to be able to extract all values from the dropdown menu; I know how to get all those values as a string, but I need to be able to access each item; (the value in a dropdown menu will change dynamically)
How do I get number of item is selection dropdown?
How do I extract a ?name? for each value, one by one?
How do I change a selection by referring to particular index of the item in a dropdown menu?
Here is the Path to dropdown menu that I'm trying to access (form contains number of similar dropdowns)
RSWApp.om.GetElementByPath "window(index=0).form(id=""aspnetForm"" | action=""advancedsearch.aspx"" | index=0).formelement[SELECT](name=""ctl00$MainContent$hardwareBrand"" | id=""ctl00_MainContent_hardwareBrand"" | index=16)", element
Message was edited by: testtestThe findElement method allows various attributes to be used to search. Take the following two examples for the element below:
<Select Name=ProdType ID=testProd>
</Select>
I can find the element based on its name or any other attribute, I just need to specify what I am looking for. To find it by name I would do the following:
Set x = RSWApp.om.FindElement("ProdType","SELECT","Name")
If I want to search by id I could do the following:
Set x = RSWApp.om.FindElement("testProd","SELECT","ID")
Usually you will use whatever is available. Since the select element has no name or ID on the Empirix home page, I used the onChange attribute. You can use any attribute as long as you specify which one you are using (last argument in these examples)
You can use the FindElement to grab links, text boxes, etc.
The next example grabs from a link on a page
Home
Set x = RSWApp.om.FindElement("Home","A","innerText")
I hope this helps clear it up. -
Getting all the values from a JList
Hi,
I want to get all the values from a JList and store it into an array. Any method is available to perform this task? Pls help me out with this task.Use getModel() on the list to get the ListModel and then call getSize() and getElementAt(int) to loop over the elements
HTH
Mike -
How to get all the values in one column of a JTable
How to get all the values in one column of a JTable as a Collection of String.
I don;t want to write a for loop to say getValueAt(row, 1) eg for 2nd column.I don;t want to write a for loop to say getValueAt(row, 1) eg for 2nd column. You could always write a custom TableModel that stores the data in the format you want it. It would probably be about 50 lines of code. Or you could write a loop in 3 lines of code. I'll let you decide which approach you want to take.
-
How to get all checked values from a chaeck box
Hello
In my app i have a checkbox called P10_CID with static lov like
STATIC2:one;1,two;2,three;3,four;4,six;6
my question is when i check more than one option
i can not get that value.
How is it possible to see all the values of the check box that are checked ?
Regards
ArisHi Aris,
Do you have to have checkboxes? Can you use a multiselect list instead?
If you can, then the following excerpt from the user guide may help you:
Using HTMLDB_UTIL.STRING_TO_TABLE to Convert Selected Values
Suppose you had a report on the EMP and DEPT tables that is limited by the
departments selected from a Department multiple select list. First, you create the
multiple select item, P1_DEPTNO, using the following query:
SELECT dname, deptno
FROM dept
Second, you return only those employees within the selected departments as follows:
SELECT ename, job, sal, comm, dname
FROM emp e, dept d
WHERE d.deptno = e.deptno
AND instr(':'||:P1_DEPTNO||':',':'||e.deptno||':') > 0
Regards
Andy
Maybe you are looking for
-
Unable to see IMAP folders after crashing Memory module.
Hi All, We are running Sun JES Messaging Server V6.2 on Sun Sparc Solaris9 platform. Software Name/Version: Sun Java(tm) System Messaging Server 6.2-4.01 (built Sep 1 2005) libimta.so 6.2-4.01 (built 04:31:31, Sep 1 2005) SunOS jes-be 5.9 Generic_117
-
Premiere Pro CC crashes on startup since upgrade from 6 to CC
Just installed Premiere Pro CC on PC that had Premiere Pro 6 on it PP crashes on every attempt to start it! Problem signature: Problem Event Name: APPCRASH Application Name: Adobe Premiere Pro.exe Application Version: 7.2.2.33 Application Timestamp:
-
Itunes says I'm not connected to the Internet Windows 7
I am using Windows 7 and have downloaded an update to Itunes. It now says it can't connect to internet, even though I am connected. I've tried uninstalling and reinstalling. I also went to the command screen and typed something in with the word fl
-
the first line below gives an error that says "Statement expected. " public Connection getConnection() { Connection conn = null; try { String userid = "ddavidson"; String password = "8132"; String driver = "sun.jdbc.odbc.JdbcOdbcDriver"; String URL =
-
Can I force Safari (Mac) to use Adober Acrobat instead of defaulting to Adobe Reader and requesting approval for every PDF?