Adding a 5.1(1)s221 sensor to vms 2.3

What is the correct way to bring the vms server back in sync with the sensor signature version?
E.g. if the sensor is already at version 5.1(1)S221.0 because upgrades to the sensor were applied via the CLI and you would now like to add the sensor to a group on the vms server, but you don’t yet have the option to select the version 5.1(1)s221 for the sensor that you are about to import.
Do you just apply the s221.zip file to the management station?
When do you have the option to select 5.1.5s221 on the VMS station?

You must have VMS 2.3 installed to install IPS MC and Security Monitor 2.2.
IPS MC and Security Monitor are components of the VPN/Security Management Solution (VMS). CiscoWorks Common Services 2.2, another component of VMS, is required for IPS MC and Security Monitor to work. CiscoWorks Common Services 2.2 provides the CiscoWorks Server base components and software developed to support IPS MC and Security Monitor, including the necessary software libraries and packages
http://www.cisco.com/en/US/products/sw/cscowork/ps3990/prod_release_note09186a00805b1c33.html

Similar Messages

  • Adding RAM to Servers in the pool, manager doesn't see the new value.

    We recently updated all of the servers that make up our OVM Server Farm from 8G to 16G however when I click on one of the servers in the pool using the Manager it still displays the old value of 8G. One way we found to update the value was to delete and add the server back into the pool. Once we did that it displayed the new value, however I can not use that on the Server Pool Master as it will not allow me to delete the pool master node.
    I tried using the Metalink document 467663.1 to assign one of the other servers to be the pool master, but the documentation seems flawed.
    When following Scenario 3 you pretty much move all VM off the new and old pool master, remove the server you want to be the new pool master then edit the existing pool master's entry to be the new servers IP/hostname. However when I attempt to edit the server pools information the server name/IP is not editable only the machine name is.
    Does anyone know of an easier way to update the RAM listing for the server pool master? Or is there updated documentation for moving the server pool master? I'm using version 2.1.5

    You may also delete the whole Server Pool, taking care NOT selecting the various "ALSO DELETE FILES FROM REPOSITORY" options.
    I repeat, DO NOT SELECT THOSE CHECKBOXES.
    If you have running VMs that you cannot shutdown during this process, ticking the "force Server Pool Delete" box will do the trick, leaving all the VMs normally running and working in the background.
    After that, you can recreate the Server Pool, add the correctly configured Servers to it (NOW YOU'LL SEE ALL THE PHYSICAL RAM YOU'VE ADDED), and finally manually discovering all the running VMs already in the repository.
    To do this, use the "Resources --> Virtual Machine Images --> import --> Select from Server Pool (Discover and register)" option.
    Remember to APPROVE each discovered VM to see it back happily running in the main menu.
    Finally, you can eventually manually discover all the Templates you may have had in the Repository before starting this process.
    To do this, use the "Resources --> Virtual Machine Templates --> import --> Select from Server Pool (Discover and register)" option. You'll have to APPROVE in the end, too.
    This is just a workaround, I agree that there should be a "refresh" option for Servers Configurations, or at least a way to remove and re-add the Server Pool Master too.
    HTH

  • Sorting serial packet data into queues

    I am receiving serial packet data which originates from different sensor nodes in a network. Each sensor node
    has a unique ID which is sent in the packet. The idea is to display the data in one chart and choose which sensor data to display
    by using a cluster of booleans. I was thinking of using queues to buffer the data from single nodes, so for a network of 12 nodes 
    I would need 12 queues and use a simple case structure to decide to which queue the element should be enqueued. Does this approach 
    make sense or is there a simpler way to solve this problem? 

    That seems reasonable.  You certainly need 12 of something for the data from the separate sensors. If the number of sensors can change, a 2D array might be better because you do not need to duplicate anything (such as adding another queue) to add a sensor.  However, arrays must be rectangular so if different amounts of data are received from different sensors, some method of keeping track what data is valid for each sensor will be required. The data from each sensor could be in a different row.
    You probably want to use a graph, not a chart.  When you switch the display to a different sensor, you just wire that array row for that sensor to the graph.  Charts have an internal hsitory buffer and would be much more complicated to switch.
    Lynn

  • IDSMC 2.0 TLS trusted host

    I just upgraded to IDSMC 2.0 today. When I try to do signatures updates to a 4.1 sensor, the job fails with this error below. I already added the VMS server as a trusted TLS host on the sensor. Rebooted.
    Any ideas? Do I need to add the sensors cert to the VMS server somehow?
    Status Messages
    Sensor bbimainsae01: Signature Update Process
    TLS Trusted Host Certificate difference found, updating sensor certificate for the MC.
    The trusted certificates on the sensor 172.16.1.153 have been updated.
    An error occurred while running the update script on the sensor named bbimainsae01. Detail = An error occurred at the sensor during the update, sensor message = The host is not trusted. Add the host to the system's trusted TLS certificates.

    We've seen a few of these cases, but have not been able to gather enough information to understand where the breakage is occurring.
    The first thing to do is to log into the IDS unit as an administrative user (i.e., "cisco"). Make sure the time on the sensor is accurate. Then take a look at the list of trusted certificates. Next, remove the certificate for the VMS server and re-trust it manually. Finally, attempt the upgrade command manually from the IDS CLI.
    Here are the commands to enter into the IDS CLI to perform these actions. The example uses "10.1.2.3" for the IP address of the VMS host, and "IDS-sig-4.1-4-S128.rpm.pkg" as the name of the package you want to apply to the sensor:
    sensor# show clock
    *03:27:22 UTC Wed Dec 01 2004
    sensor# configure terminal
    sensor(config)# service trustedCertificates
    sensor(config-TrustedCertificates)# show settings
    trustedCertificates (min: 0, max: 500, current: 0)
    sensor(config-TrustedCertificates)# exit
    sensor(config)# tls trusted-host ip-address 10.1.2.3 port 443
    Certificate MD5 fingerprint is 0A:CB:6F:B5:F8:F8:85:05:5B:5D:7D:0B:73:E1:14:A6
    Certificate SHA1 fingerprint is CF:9D:85:60:CA:31:99:26:64:26:39:23:AE:66:E8:3C:BC:68:12:02
    Would you like to add this to the trusted certificate table for this host?[yes]:
    Certificate ID: 10.1.2.3 succesfully added to the TLS trusted host table.
    sensor(config)# upgrade https://10.1.2.3/ids-config/vms/sensorupdate/IDS-sig-4.1-4-S128.rpm.pkg
    Warning: Executing this command will apply a signature update to the application partition.
    Continue with upgrade? : yes
    If the tls trusted-host command does not succeed, we will need to obtain a packet capture to diagnose why. I've provided instructions for doing this elsewhere in this forum. (Search for recent articles by me.)
    If you can get the tls trusted-host command to succeed, but the upgrade command fails, then we need to see what might be wrong with the certificate on the VMS server.
    If both commands succeed manually, you can re-import the sensor in VMS so it will detect it is running the new version. We will then need to wait until the next signature update to see what happens when you use VMS to upgrade the sensor.

  • IDS and IPS ?

    Hi
    I am using before 4215 IDS in my network.
    My question is what is basic difference IDS and IPS ?. why I am using IPS in place of IDS , what is the key point and benefit ?.
    Thanks
    biplob

    Hi,
    Here are the definitions from IPS 5.1 guide.
    Understanding Promiscuous Mode (IDS)
    In promiscuous mode, packets do not flow through the sensor. The sensor analyzes a copy of the monitored traffic rather than the actual forwarded packet. The advantage of operating in promiscuous mode is that the sensor does not affect the packet flow with the forwarded traffic. The disadvantage of operating in promiscuous mode, however, is the sensor cannot stop malicious traffic from reaching its intended target for certain types of attacks, such as atomic attacks (single-packet attacks). The response actions implemented by promiscuous sensor devices are post-event responses and often require assistance from other networking devices, for example, routers and firewalls, to respond to an attack. While such response actions can prevent some classes of attacks, in atomic attacks the single packet has the chance of reaching the target system before the promiscuous-based sensor can apply an ACL modification on a managed device (such as a firewall, switch, or router).
    Understanding Inline Interface Mode (IPS)
    Operating in inline interface mode puts the IPS directly into the traffic flow and affects packet-forwarding rates making them slower by adding latency. This allows the sensor to stop attacks by dropping malicious traffic before it reaches the intended target, thus providing a protective service. Not only is the inline device processing information on layers 3 and 4, but it is also analyzing the contents and payload of the packets for more sophisticated embedded attacks (layers 3 to 7). This deeper analysis lets the system identify and stop and/or block attacks that would normally pass through a traditional firewall device.
    In inline interface mode, a packet comes in through the first interface of the pair on the sensor and out the second interface of the pair. The packet is sent to the second interface of the pair unless that packet is being denied or modified by a signature.
    http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/products_configuration_guide_chapter09186a008055df7d.html#wp1033759
    Hope this helps.
    Edward

  • Lync online meeting Firewall help

    We do not have Lync in my business but we do have some employees who join online Lync meetings that a customer hosts. The issue we are having is that we can log into the meeting and load the Lync Web App but when the host shares their screen, we get nothing. It just loops. I have made sure to allow the program through the local Windows Firewall ( I even disabled the Firewall in one test and still no go)I setup a meeting with the host today and logged in on my network and on my hot spot. Hot Spot works no problem which leads me to believe it's firewall related. I allowed the ports that I found for Lync Online and still nada. I have a Fortigate Firewall. Has anyone ever allowed Lync through this type of Firewall? I tried adding the applications to a Monitor Sensor and still can't see anything. We are running Win 7 Enterprise with IE 11...
    This topic first appeared in the Spiceworks Community

    That sounds like either ports blocked or perhaps a routing issue. Of course more details about your architecture are required to make a more accurate assumption. Also, you should be seeing errors in the Front End servers Event Log that could put you on to
    the underlying cause.
    Lastly, collect a trace using OCSLogger and analyze with Snooper to see why the audio is failing.
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Lync Sorted blog

  • Speedfan 4.10 is out

    Those using the Speedfan 4.09, the latest version is out.
    http://www.almico.com/speedfan.php

    4.10 - added full support for AMD8111 SMBus 1.0
    - added full support for LM85C
     - added full support for ADT7463
     - added full support for nForce3
     - added full support for ADM1027
     - added full support for EMC6D103
     - added full support for ASUS MOZART-2
     - added nForce2 cooling bits in CONFIGURATION / ADVANCED
     - better identified a false LM80
     - added preliminary detection for EMC6W201
     - added preliminary detection for EMCT03  
     - added ability to read a PCI DEVICES database
     - trying to make PWM control work on more ASUS boards
     - added fourth temp for ASB100
     - new processors detected
     - exiting the configuration dialog refreshes CHART names
     - added preliminary support for SERVERWORKS CSB5
     - added preliminary support for PC87372
     - added preliminary detection for LM63, LM64 and LM93
     - fixed some LPC47M192 PWM readings
     - added support for IT8712F and IT8705F sensors at non standard address

  • Report/Widget for combined performance data

    Hello.
    I have created a dashboard view in SCOM 2012 R2 for power consumption of a number of servers. These servers are all part of a group. The power consists of a couple of different performance monitors (VMWare-sensor for VMs and Power Meter from the Power
    Consumption MP)
    The dashboard view works well, however I am after a total figure for each server in the group. Ideally this figure would be on the dashboard view as well.
    E.g. if I have 3 servers with the below power draw
    Server 1 – 150 Watts
    Server 2 – 200 Watts
    Server 3 – 300 Watts
    I would like a box stating total power 650 Watts
    If this is not available in a dashboard view, a report would be okay
    Thanks

    Hi,
    As far as I know, there is no direct way, you may create a sql query and sum the value for each server.
    You may refer to the helpful article below:
    http://blogs.technet.com/b/drewfs/archive/2014/08/17/scom-performance-data-and-power-view.aspx
    Regards,
    Yan Li
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Ghost VM resources under failover cluster manager roles

    Hello, everyone,
    I had a Windows 2012 R2 hyper-v host with few VMs running on it. I deployed a second host, and using SC VMM created a failover cluster. Also I added a shared cluster volume and migrated all VMs to the shared storage using SC VMM console. In
    the process I also checked the checkbox to make the VM highly available. Everithyng worked fine.
    Now when I look in to Failover Cluster Manager console I see some "ghost" vm roles. Their names are correspondend to the names of the running VMs, which I also can see in the console. For example I have vm HDCADC01, there is another
    role in the console "SCVMM HDCADC01 Resources", the status  is off, settings are empty.
    Does anyone knows what are these resources? Is it somekind of glitch during the migration? Is it safe to remove them?
    Thank you,
    Jamal.

    Where should I run this command?
    On my VMM server Update-clustervirtualmachineconfiguration command complains that The cluster services is not running.
    On the one of hyper-v server, cluster nodes, "get-vm -name  hdcadc01" returns "Get-VM : A parameter is invalid. Hyper-V was unable to find a virtual machine with name hdcadc01". The same result is when I used "ghost" resources name.

  • Upgrading IDSM2 and IDS 4235

    I have 12 IDSM2 and 4 IDS 4235 managed through VMS, I configured automatic download of signature updates but I notice that S189 was missed.
    Is it possible to apply the last Service Pack 4.1.5 from VMS? If yes do I simply have to download the file in the correct directory and apply it as a normal signature update or what method shall I use? I need to manage the update process centrally because my IDS systems are all remote.
    Thanks for your help,
    Chiara

    I tried. There is no way to do it. VMS returns a bad file type and effectively the service pack is .rpm.pkg while files managed during updates by VMS are .zip containing .rpm.pkg and other files.
    I manually did the update on every IDS by ftp and command line and where the update succeeded I had to re-import the sensor on VMS, otherwise the version was not aligned.
    Is this the power of a central management platform?

  • Cisco IPS Events Collector?

    I use CiscoWorks VMS / Security Monitor for my cisco ips sensors. I'm very familiar with the idsalarms utility for exporting event data to an xml file. But I would like to find a solution to pulling the events off the sensors without VMS or idsalarms. Is there another command line utility or standalone software that will connect to the sensors just for saving the events to a file?

    Hi NItesh,
    i'm suggesting to deploy another log server.
    and config remote log target to that server.
    in another way,
    you can config monitoring log recovery in Monitoring Configuration > System Operations > Log Message Recovery.
    http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_system/5-5/user/guide/acsuserguide/viewer_sys_ops.html#pgfId-1083029

  • Signature 171 Digital Signature Error

    When I install signature 171 to IDSM2's using VMS 2.3 I get: An error occurred while running the update script on the sensor named IDS-C1-B. Detail = An error occurred at the sensor during the update, sensor message = idsPackageMgr: digital signature of the update file was not valid, use CCO to replace corrupted file
    The update of the VMS management center and security monitor worked OK. Does anyone know it this signature zip file is really corrupt?
    I re-downloaded and replaced the file in VMS, but still got the same message.

    Upgrading a sensor via VMS is part of our standard testing procedure for a new signature update and it passed the test!
    Unfortunately, for some reasons, the checksum of the file published on Cisco.com doesn't match the checksum of the file we have tested.
    My apologies for any inconvenience it could have caused, we are working to have this fixed asap!
    I'll post again once this has been done.

  • PDF Template Digital Signature Error

    BI Pub 11.1.1.5.0 --
    Just wondering if anyone has found a workaround to the error below ...
    In order for end users to digitally sign a pdf temple field in adobe reader, adobe pro has to "Extend features to Adobe Reader" on the template but that functionality breaks when BI Publisher modifies the form by layering data into it. So when the form is opened the user will get an error like:
    "This document has enabled extended features in Adobe Acrobat. The document has been changed since it was created and use of extended features is no longer available. Contact the original author."
    Has anyone been able to successfully implement this functionality?
    Ricker

    Upgrading a sensor via VMS is part of our standard testing procedure for a new signature update and it passed the test!
    Unfortunately, for some reasons, the checksum of the file published on Cisco.com doesn't match the checksum of the file we have tested.
    My apologies for any inconvenience it could have caused, we are working to have this fixed asap!
    I'll post again once this has been done.

  • Human task digital signature error

    Hello
    I configured a human task to require digital signature. I uploaded the client certificate in the 'workspace' but when I select the sign option I get the following error:
    Can anyone give me some hint about what might be happening?
    <SignatureValidator.getSignatureProps> java.lang.IllegalArgumentException
    at oracle.security.crypto.util.Utils.a(Unknown Source)
    at oracle.security.crypto.util.Utils.fromBase64(Unknown Source)
    at oracle.security.digsig.PKCS7Verifier.finish(PKCS7Verifier.java:272)
    at oracle.bpel.services.workflow.evidence.validator.SignatureValidator.getSignatureProps(SignatureValidator.java:175)
    at oracle.bpel.services.workflow.evidence.validator.SignatureValidator.getCertificateId(SignatureValidator.java:124)
    at oracle.bpel.services.workflow.evidence.impl.TaskEvidenceService.getCertificateIdFromStore(TaskEvidenceService.java:783)
    at oracle.bpel.services.workflow.evidence.impl.TaskEvidenceService.validateEvidenceType(TaskEvidenceService.java:737)
    at oracle.bpel.services.workflow.evidence.impl.TaskEvidenceService.createEvidence(TaskEvidenceService.java:390)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
    at oracle.bpel.services.workflow.common.WorkflowServiceCacheEventAdvice.invoke(WorkflowServiceCacheEventAdvice.java:91)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at oracle.bpel.services.workflow.test.workflow.ExceptionTestCaseBuilder.invoke(ExceptionTestCaseBuilder.java:155)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at oracle.bpel.services.common.dms.MethodPhaseEventAspect.invoke(MethodPhaseEventAspect.java:82)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at oracle.bpel.services.common.dms.MethodEventAspect.invoke(MethodEventAspect.java:70)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
    at $Proxy559.createEvidence(Unknown Source)
    at oracle.bpel.services.workflow.task.impl.TaskService.createTaskEvidence(TaskService.java:3214)
    at oracle.bpel.services.workflow.task.impl.TaskService.updateTaskOutcome(TaskService.java:3158)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
    at oracle.bpel.services.workflow.common.WorkflowServiceCacheEventAdvice.invoke(WorkflowServiceCacheEventAdvice.java:91)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at oracle.bpel.services.workflow.test.workflow.ExceptionTestCaseBuilder.invoke(ExceptionTestCaseBuilder.java:155)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at oracle.bpel.services.common.dms.MethodEventAspect.invoke(MethodEventAspect.java:70)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at oracle.bpel.services.common.dms.MethodPhaseEventAspect.invoke(MethodPhaseEventAspect.java:82)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
    at $Proxy269.updateTaskOutcome(Unknown Source)
    at oracle.bpel.services.workflow.task.ejb.TaskServiceBean.updateTaskOutcome(TaskServiceBean.java:582)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.oracle.pitchfork.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:34)
    at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
    at com.oracle.pitchfork.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:42)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
    at $Proxy330.updateTaskOutcome(Unknown Source)
    at oracle.bpel.services.workflow.task.ejb.TaskServiceBean_399vcw_EOImpl.__WL_invoke(Unknown Source)
    at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
    at oracle.bpel.services.workflow.task.ejb.TaskServiceBean_399vcw_EOImpl.updateTaskOutcome(Unknown Source)
    at oracle.bpel.services.workflow.task.ejb.TaskServiceBean_399vcw_EOImpl_WLSkel.invoke(Unknown Source)
    at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
    at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:345)
    at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
    at oracle.bpel.services.workflow.task.ejb.TaskServiceBean_399vcw_EOImpl_1036_WLStub.updateTaskOutcome(Unknown Source)
    at oracle.bpel.services.workflow.task.client.TaskServiceRemoteClient.updateTaskOutcome(TaskServiceRemoteClient.java:2213)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at oracle.bpel.services.workflow.client.WFClientRetryInvocationHandler.invokeTarget(WFClientRetryInvocationHandler.java:133)
    at oracle.bpel.services.workflow.client.WFClientRetryInvocationHandler.invoke(WFClientRetryInvocationHandler.java:72)
    at $Proxy557.updateTaskOutcome(Unknown Source)
    at oracle.bpel.worklistapp.tasklist.beans.model.SignTaskModel.signTask(SignTaskModel.java:110)
    at oracle.bpel.worklistapp.tasklist.beans.controller.TaskController.signTask(TaskController.java:1314)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.sun.el.parser.AstValue.invoke(AstValue.java:187)
    at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:297)
    at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
    at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1256)
    at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
    at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475)
    at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:890)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:379)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:194)
    at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:447)
    at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:447)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
    at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
    at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
    at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
    at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
    at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
    at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
    at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
    at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
    at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
    at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    Upgrading a sensor via VMS is part of our standard testing procedure for a new signature update and it passed the test!
    Unfortunately, for some reasons, the checksum of the file published on Cisco.com doesn't match the checksum of the file we have tested.
    My apologies for any inconvenience it could have caused, we are working to have this fixed asap!
    I'll post again once this has been done.

  • IPS 5.0 updates

    I apologize, but I have been sorta out of the loop for a while. I would like to update both Sensor and VMS to the latest and greatest updates. Can someone tell me what upgrades/updates I iwll need to upgrade VMS 2.3 and my 4235s?
    Thank you,
    Dwane

    Can you ssh to the sensor from the MC box? If so, I'd suggest testing the MC-Sensor synchronization before attempting the 4.1(5) upgrade. You can try querying each sensor and pushing a trivial updated config (i.e. change alarm severety of one sig). If you're able to do this, you should be able to apply the 4.1(5) upgrade via MC.

Maybe you are looking for