Adding a label

how can i swap a label on a jpanel with another? i am able to successfully remove the label component from the jpanel, but attempting to add another afterwards does not do anything, even with repaint(); my labels have ImageIcons.
thanks in advance

thanks! i owe you my life, and my CS grade, lol. :-)

Similar Messages

  • Adding data labels to column graph

    I work in the financial industry and I have to add data labels to all bars that appear in my ten year performance graphs (see http://fundinvestor.calamos.com/ClosedEndFunds/CEFund.aspx?name=CHI under the "Performance" tab as an example). Is there a script that can do this? I saw there's this technique that Adobe offers for column totals: http://livedocs.adobe.com/en_US/Illustrator/13.0/help.html?content=WS714a382cdf7d304e7e07d 0100196cbc5f-619e.html but that's not working. What am I doing wrong? Adding data labels to bars is ridiculously simple in Excel, why can't I find the way to do it easily in Illustrator?

    http://help.adobe.com/en_US/Illustrator/14.0/WS714a382cdf7d304e7e07d0100196cbc5f-619ea.htm l
    That should do the trick.
    Mylenium

  • On which router B bit is added in Label?

    On which router B bit is added in Label?

    Ashwin,
    I hope you are referring "Bottom of stack" bit?. If yes, please see below,
    When LER (Label Edge Router) receives the IP packet and if the egress is LSP based, it pushes one or more labels. The number of label to be pushed depends on the service and the transport path. For example, when the SP is providing L2/L3 VPN service, the LER will push 2 labels. The bottom label to identify the service and the top label to identify the remote edge router. If there is TE tunnel established along the path and if the TE is not end-to-end, you may see 3 labels pushed. 
    When LER pushes the labels, it set the S bit as 1 in the bottom label. This is required so the ASIC can understand if the ethertype is to be set to 0800 (IP packet) or 8847 (MPLS packet).
    -Nagendra

  • Adding Custom Labels Missing for Contact Numbers After Upgrading to iOS 8.0 and issue still exists on iOS 8.1

    I noticed that after upgrading to iOS 8.0 on my iPhone 5s, adding custom labels for contact numbers got removed. It still exists on iOS 8.1 as well. Is there someone who is facing a similar issue or can someone help me how to get that back. Any suggestions would be greatly appreciated.
    Thank you.

    Hi Yugendra,
    Thanks for visiting Apple Support Communities.
    I have good news. You can still choose a custom label in Contacts on iOS 8. The option should be below "Other" in the list of labels when editing a contact. This information is found in the iOS 8 user guide:
    Contacts at a glance - iPhone
    Change a label. If a field has the wrong label, such as Home instead of Work, tap Edit. Then tap the label and choose one from the list, or tap Add Custom Label to create one of your own.
    Best Regards,
    Jeremy

  • Adding a label on a panel

    i have around 7 buttons. Whenever i click on any 1 button, a label with an ImageIcon parameter needs to be displayed on a panel.
    when the user clicks the second button, another label with an ImageIcon gets added on the same panel(now the panel has first label+ second label).
    These labels can also be moved on the panel using mouse(i have the code to make the label move on the panel).
    How do i add these labels on my panel on their respective button clicks?? thanx in advance

    i have the following code which adds images on panel and also moves them.you can use any of your own images.i do not know how to add the data structure you suggested....so please help me...thanx in advance
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    import java.awt.datatransfer.*;
    import java.io.*;
    public class Post extends JFrame implements ActionListener,MouseListener,MouseMotionListener
         Container con;
         MenuBar mbar;
         Menu file,edit,view;
         JPanel p1;
         JPanel dropZone;
         private int xAdjustment;
         private int yAdjustment;
         Component dragComponent;
         int xpoint;
         int ypoint;
         Uml()
         super("Model Transformation Tool");
         con=getContentPane();
         Toolkit kit = Toolkit.getDefaultToolkit();
             final Clipboard clipboard =kit.getSystemClipboard();
         addMouseListener(this);
         addMouseMotionListener(this);
         ImageIcon act = new ImageIcon("..\\uml\\actor4.gif");
         JButton actor = new JButton(act);
         ImageIcon inher = new ImageIcon("..\\uml\\inher.gif");
         JButton inheritance = new JButton(inher);
         actor.setActionCommand("actor");
         actor.addActionListener(this);
         inheritance.setActionCommand("inheritance");
         inheritance.addActionListener(this);
         dropZone = new JPanel();
             dropZone.setBorder(BorderFactory.createLineBorder (Color.blue, 2));
               dropZone.setBackground(Color.WHITE);
         p1=new JPanel();
         con.setLayout(new BorderLayout());
         p1.setLayout(new FlowLayout());
         p1.add(actor);
         p1.add(inheritance);
         con.add(p1,BorderLayout.NORTH);
         con.add(dropZone, BorderLayout.CENTER);
         setVisible(true);
         public void actionPerformed(ActionEvent e)
              String tmp=e.getActionCommand();
              if("actor".equals(tmp))
              Icon icon1 = new ImageIcon("..\\uml\\actorfull.gif");
              JLabel label1=new JLabel(icon1);
              dropZone.add(label1);
              dropZone.revalidate();
              String aname=JOptionPane.showInputDialog("Enter the name of actor");
              JLabel actorname=new JLabel(aname);
              dropZone.add(actorname);
              dropZone.revalidate();
              if("inheritance".equals(tmp))
              Icon icon3 = new ImageIcon("..\\uml\\inher_full.gif");
              JLabel label3=new JLabel(icon3);
              dropZone.add(label3);
              dropZone.revalidate();                    
    }//actionPerformed
         public void mousePressed(MouseEvent e)
              Container container =  (Container)e.getSource();
              Component component =  container.findComponentAt(e.getX(), e.getY());
              if (component instanceof JPanel) return;
              dragComponent = component;
              xAdjustment = dragComponent.getLocation().x - e.getX();
              yAdjustment = dragComponent.getLocation().y - e.getY();
         **  Move the component around the panel
         public void mouseDragged(MouseEvent e)
              if (dragComponent == null) return;
              dragComponent.setLocation(e.getX() + xAdjustment, e.getY() + yAdjustment);
         **  Deselect the component
         public void mouseReleased(MouseEvent e)
              dragComponent = null;
         public void mouseClicked(MouseEvent e) {}
         public void mouseMoved(MouseEvent e) {}
         public void mouseEntered(MouseEvent e) {}
         public void mouseExited(MouseEvent e) {}
         public static void main(String args[])
         Toolkit kit = Toolkit.getDefaultToolkit();
         Dimension screenSize = kit.getScreenSize();
         int screenWidth = screenSize.width;
         int screenHeight = screenSize.height;
         Uml obj=new Uml();     
         obj.setBounds(0, 0, screenWidth, screenHeight-29);
         obj.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    }//class

  • Globally adding "custom" labels to Address Book

    Any way to do it?
    I understand how labels work now (I think); that a custom label is only saved with the contact itself.
    What I want to do is to add a label (e.g.: "Skype" to the phone numbers) that I can choose in existing contacts without having to retype it every time. For new contacts, I can change the template to help a bit, but for existing contacts, it seems there is no way but to type it every time.

    you add add it to the AB template in AB preferences->template. then it will automatically appear in all new vcards you create. but for some reason it won't be automatically added to existing contacts. that seems a bug to me.

  • Adding more labels?

    Good afternoon everyone.
    So I want to have more labels than the 8 Premiere Pro gives me but cannot find a way to add any more.  Are there options to do so that I'm simply not seeing nor finding?

    I want the same and can't see that it is currently possible.
    I've added a feature request for this.

  • Adding "Explicit" labels

    Is it possible to add an "explicit content" label to music you've ripped from a CD? It's great the the iTMS tunes have this label, but I'd like to organize my library so that I can filter content according to those labels (which also brings up the question as to whether you can create smart playlists to check for the labels in the first place).
    I've also read that you can't remove the "explicit" label from iTMS music, but I wanted to confirm this -- I've bought nonexplicit tracks from otherwise explicit-labeled albums, so the label isn't always accurate.
    I haven't been able to find an "explicit" tag mentioned in any of the MP3 or AAC file specifications, but I may be wrong. I also know that iTunes categorizes explicit podcasts on the basis of the XML files, but that doesn't really seem to apply here either.

    Thanks! I've actually taken that step so far, but it strikes me as a little redundant. If there's already a system for labeling songs as "explicit," then I shouldn't have to repeat the designation by setting up a comletely separate grouping.
    No, it's not causing any earth-shattering difficulty -- and in that regard, there are any number of questions on this board far more deserving of an immediate response -- but just something that's been bugging me. And since I haven't been able to find any answers "out there," I thought this was the best place to look.

  • Adding a Label to the ouput of a GROUPING SET.Please see

    I have created a report using GROUP BY GROUPING SET and am getting
    the correct output in 9i Reports and have used the 'Group Above' Layout
    SQL Query :
    SELECT
                   crest_pid                 as Lender,
                   crest_trans_id            as Transaction_ID,
                   crest_otran_id            as Loan_Return_ID,
                   acnt_code                 as Account_ID,
                   delrec                    as DelRec,
                   substr(consid,1,3)        as CCY,
                   sum(Substr(consid,4))     as Amount
    FROM     msg_sld_atxp_v
    group by grouping sets (
                      (crest_pid, crest_trans_id,crest_otran_id,acnt_code,delrec,substr(consid,1,3) ) ,
                      (crest_pid, acnt_code, delrec,substr(consid,1,3) ),
                      (acnt_code, delrec,substr(consid,1,3) )
    order by Transaction_ID,Loan_Return_ID,Account_IDReport Output :
    Transaction ID Loan Return ID Account ID   DelRec         CCY       Amount
    HSBC
    ABCD          LR_LoanId1     AC_Id1       DELIVER        GBP       1000.00
    ABCD          LR_LoanId2     AC_Id1       DELIVER        GBP       1000.00
                                 AC_Id1       DELIVER        GBP       2000.00                              Look at the third line.It sums up Amount for DelRec and CCY.Thats right.
    Now,I want to add the Label 'TOTAL' on this 3rd Line,so that this looks like
    Transaction ID Loan Return ID Account ID   DelRec         CCY       Amount
    HSBC
    ABCD          LR_LoanId1     AC_Id1       DELIVER        GBP       1000.00
    ABCD          LR_LoanId2     AC_Id1       DELIVER        GBP       1000.00
                  TOTAL          AC_Id1       DELIVER        GBP       2000.00                              I am unable to add this Label as in the Data Model,the record is in a
    repeating frame and I cannot add the label.
    Is there any way I can add a Label so that the user can see the Label 'TOTAL'
    which clearly specified that it is totalling the Amount.
    Can I say something like :
    SELECT
                   crest_pid                 as Lender,
                   crest_trans_id            as Transaction_ID,
                   crest_otran_id            as Loan_Return_ID,
                   acnt_code                 as Account_ID,
                   delrec                    as DelRec,
                   substr(consid,1,3)        as CCY,
                   sum(Substr(consid,4))     as Amount
    FROM     msg_sld_atxp_v
    group by grouping sets (
                      (crest_pid, crest_trans_id,crest_otran_id,acnt_code,delrec,substr(consid,1,3) ) ,
                      (crest_pid, acnt_code, delrec,substr(consid,1,3) ),
                      (acnt_code, delrec,substr(consid,1,3) ) TOTAL
    order by Transaction_ID,Loan_Return_ID,Account_IDI am hardcoding TOTAL in the set
    (acnt_code, delrec,substr(consid,1,3) ) TOTAL
    Am I clear in my explaination

    Labels & Addresses will let you customize the address in anyway you like. Furthermore, if you need to print multiple addresses, which seems to be the case here, merge printing will allow you to print addresses for multiple contacts. The program integrates with Address Book, so you can easily use contacts stored there.

  • Adding a label in a page

    Dear all,
    Hope you all are well.
    would you please tell me how can i add a text label in OA page.

    Dear gyan,
    thanks a lot for your reply.
    would you please tell me that whether it is possible to add a table which heading is a label and two row will contain two links.
    for example:
    column 1 column 2
    <link1> <link2>

  • Problem Adding Custom Labels to Address Book

    I add custom labels to the Template in Address Book Preferences. There's no problem at this stage, the custom labels appear along with the preset labels in the Template. But when I leave Preferences, go back to Address Book and add a new card, the custom labels disappear.
    What am I doing wrong?
    Any help would be appreciated. And thank you in advance.

    Barney-15E: Thanks for your previous reply!
    Would you check this work-around for me? I think I found a way to compose a master list of custom labels and have them available for multiple cards (new and old) in Address Book on a MacBookPro and in the Contacts directory on an iPhone. I have tried compiling a master list of custom labels using Address Book Preferences/Template and I find there's a limit to the number of custom labels I can add as a label for each field.
    Here's my workaround.
    1) Go to the iPhone Contacts directory.
    2) Add a new card.
    2) Enter data in these fields: address, date, email, and phone. The standard label will appear on the screen below the data.
    3) Tap the standard label and you will go to a screen with 2 windows. The top window has the standard or preset labels for that field but below it in a second window is a button "Add Custom Label". Tap on this button and you will be able to add the text for a Custom Label for each of these fields. This will then become a master list of Custom Labels that can be used in most labels in the iPhone Contacts Directory.
    4) If you have your IPhone set up to synch with your MacBookPro or iMac, the entry in the iPhone Contacts directory will be transferred to your other Mac, with the Custom Labels.
    Barney - 15E: Can you find a glitch??? To me it seems to make a master list of custom labels available for all card, new and old. The only problem is that the input has to be done on the iPhone.

  • Adding custom labels in phone numbers

    What happened to custom labeling on the phone?

    Sometimes it is missing. A friend just brought me her iPhone 6 Verizon iOS 6.0. She was trying to find the iPhone label. It was missing from the list as was the "Add Custom Label" and the "Edit" button on the top right. I did go into her "iPhone Owner" contact and if I clicked on her existing phone number, the labels were missing. When I clicked on a new phone number label, all was OK. I could not duplicate this on any of the other contacts that I tried it on. I instructed her to "turn it off and turn it back on again". If that fixes it, I'll post it here.

  • How can i delete added custom label

    i have added too many custom lables to my contacts that i would to delete?

    Hi Chris,
    Thanks for your reply.
    I am using the native iOS reminders app. I have tried closing the app and powering my phone off and on, but to no avail. I was under the impression that one can set custom reminders using siri? I have friend with a toddler who was playing with my phone. I figured maybe she set off Siri and a custom reminder was set by mistake?

  • Adding html element identifier "class" to a label component

    Hi,
    Maybe it will be a straightforward question but I could not find the answer in anywhere. From the palette I am adding a label object to my jsp page. How can I set the "class" property of this label object? Because in the CSS file I have class selector rules and I want to associate "class" attributes with the components in my page. For the "label" component there is no "class" attribute on the properties window and I do not want to add the "class" property to jsp code manually.
    Thanks.

    Hi,
    I've done this in the OnXmlLoaded function, first tracing the nodes, and subsequently (I thought) assigning them to the label text value.  How should I modify my function?
    Thanks,
    Sid

  • Adding label as a link

    Hello!
    I', trying to ad a link in my rss-reader to open full article after hitting. I added a label in my app, choose type "link", but it is still a text sentence. How can I change it?

    On Wed, 30 Jul 2014 11:09:10 +0000, Nikita Trubetskoy wrote:
    >I added a label in my app, choose type "link", but it is still a text sentence.
    Launch(ThisItem!link!'$text')
    -- Barb Bowman

Maybe you are looking for