Adding a SSD to a Mac Pro

I want to get a Mac Pro in the new year, I will also get one of the new 300gb Intel X25-M's when they are released. I'm wondering if there is a product to mount a 2.5" SSD in the sled that doesn't cost a lot of money. The products I can find that are reasonably priced are designed for PC's and don't take into account the position of the SATA connectors in the Mac Pro. I don't want to spend $60 + shipping to Australia for the one bracket I found thats made for a Mac Pro.
Thanks for any suggestions.

Hello DELTAsnake,
As Alex said, you can install an SSD in the lower optical drive bay without any form of mounting at all:
http://macperformanceguide.com/Mac-InstallingSSD.html
I installed my SSD system boot drive (OS and Apps.) there, as per the above instructions, which are the same for the new 2010 models as shown for the Mac Pro Nehalem (2009) installation.
Its performance there is exactly the same as if it was installed in one of the Mac Pro's hard drive bays, but with the added advantage, for me, that I could use all four of those bays for a RAID 0 configuration using WD VelociRaptors.
Even if you don't want to use all four hard drive bays initially, it still makes sense to install the SSD in the lower optical drive bay, unless you need two optical drives.
You mention your intention to buy "one of the new 300gb Intel X25-M's when they are released", but why not consider an OWC Mercury Extreme Pro (or Pro RE) instead?:
http://eshop.macsales.com/shop/internalstorage/Mercury_Extreme_SSD_Sandforce/Solid_StatePro
http://eshop.macsales.com/shop/internalstorage/Mercury_Extreme_SSD_Sandforce/Solid_State_RaidEdition
They are rated extremely highly for use in Mac Pros:
http://macperformanceguide.com/SSD-RealWorld.html
I ordered a Mercury Extreme Pro RE 100GB SSD from OWC in the USA, and delivery to the UK, via Federal Express, was effected within two days.
Regards,
Bill

Similar Messages

  • Can I install a SSD in a Mac Pro 1,1?

    Is it possible to install a SSD in a Mac Pro 1,1 2 x 3GHz Dual core?
    On reading this:
    http://macperformanceguide.com/Mac-InstallingSSD.html#Installing_MacPro
    it seems it is, but when I contacted Crucial memory they didn't seem to think it was.
    I was hoping to install in my second optical drive.
    Have you tried it?
    Any advice gratefully received.
    May thanks

    The bays in the Mac Pro 1,1 [and 2,1 and 3,1] are directly wired for ATA/IDE Optical drives.
    But there are two connectors nearby on the motherboard labeled "ODD" (for Optical Disk Drive) SATA connectors (no power).
    This kit:
    Newer Technology eSATA Extender Cable Adapter for Mac Pro - Add 2 eSATA ports!
    provides the required data cables (slightly different  from each other at the motherboard end). Then you need only adapt the existing 4-pin Molex power to your SSD and you are in business.
    A 30GB SSD is very tight for Mac OS X alone (no User files) 60GB is okay, 120GB is fine, as long as you are not attempting to use Windows on the same drive and have your User files on another drive.

  • SSDs for 2008 Mac Pro

    I'm thinking about buying an SSD for my Mac Pro (see specs in my signature), any recommendations?  I've been a big fan of products from OWC in the past, so I'm considering their Mercury line.  On the other hand, Crucial drives are a bit cheaper (especially on Amazon).  Question: would there be any point in my getting an M4 from Crucial rather than a V4?  My understanding is that the primary difference is the 6gb/s vs. 3gb/s transfer rates, but that my Mac Pro can only handle 3gb/s anyway.
    I'm still on Snow Leopard for now, but I'm looking into whether or not Mountain Lion will be a worthwhile upgrade for me--still not sure about compatibility of certain key apps in my workflow.

    The main improvement in performance in a Mac Pro is establishing a boot drive with only System, Library, Applications and the hidden Unix files including paging/swap.
    The bulk of the performance increase is not from the speed of the Boot Drive, but from what it is NOT doing -- it is not moving the Data Drive heads away from your data files to go "snacking" for system files or Paging in the middle of your production work. At a cost of tens of milliseconds for every access plus that much time again to get back to the Data areas.
    ANY separate drive will produce the majority of  the improvement.
    A faster drive will produce a slight incremental improvement. A low-latency SSD will produce another slight incremental improvement. These incremental improvements will be most perceptible in a very slightly faster boot-up time and very slightly faster Application launch times.
    You are concentrating on the absolute LEAST important issues, that will have the smallest, possibly not even perceptible performance impacts.
    My Advice: Get a Boot Drive that is cheap and live happily ever after.

  • Installing three SSD drives on Mac Pro

    Hello,
    I followed the advice given here and bought 3 Samsung 840 SSD drives for my Mac Pro. Two of them are 120GB and one is 250GB.
    I also purchased a Tempo SSD Pro 6GB/s SATA PCIe Drive. Only one of them (that holds two SSDs.)
    I plan on using:
         • one SSD for the OS and APPS
         • one SSD for a PS scratch disc
         • one SSD for the photoshop, premiere pro, and after effects files I'm currently working on.
    I figured I'd keep the 1TB HDD currently used in the computer to store all my other files.
    I also have a 1TB seagate extrenal HDD that I would like to set up as a back up or time machine.
    Does this sound good?
    If so, which SSD do I install in my regular sliding drawer bay? I have 2.5" - 3.5" adapter.
    Which two do I install on the PCIe card?
    Which on do I use for what?
    As you can see I'm clueless. Lol
    Here are my specs before adding the SSDs.
    Mac Pro
    Mid 2012
    Processor  3.33 GHz 6-Core Intel Xeon
    Memory  48 GB 1333 MHz DDR3 ECC
    Graphics  ATI Radeon HD 5870 1024 MB
    Software  OS X 10.8.4 (12E55)
    Storage  1TB Sata disc (423.26GB free),
                   1TB External USB Disk freeAgent GoFlex Drive (988.58 free)
    P.S. I'm unsure about being able to install my current O.S. on the new SSD. When I bought the Mac Pro it had an older version of OS on it with a free download of the new OS. So the disc will only have the older version. Will I have to pay for the newer one or can I somehow copy it from the current HDD drive it's installed on?
    Thank you so much. You have already been a HUGE help in the past posts and look forward to your wisdom.  8 )
    Matt

    Clone the system to the SSD you plan to use for system.
    How much disk space is your system using now? w/o incl. anything in /Users, so just system.
    If your system uses 60GB you want to use the 240GB SSD.
    I think 120GB is on small side for scratch alone.
    move projects to scratch array when you want to work on them:  "Work disk + scratch" is fast. Then move them off the array, erase the array, and start a new project.
    I would try the 2 x 120 SSDs on PCIe 6G as scratch and see how it feels and works.Try and test.  No harm. I think that is what most people do, they experiement and try out different setups to find the one that works best for them.
    Important: Have a clone of the system and be ready to restore or move it around as needed.
    Install TRIM Enabler of course.
    SSD Maintenance
    Samsung recommends setting aside 10% for over-provisioning.
    Their Windows utility, shame there isn't a Mac version.
    #2: Try system on 120GB in drive bay with an adapter
    With that then use the other two on the Tempo.
    Those could be one large 360GB volume JBOD.
    You will have to see how much your scratch space gets used.
    I would have argued for 3 x 240GB SSDs. More flexible. Better SSD design - slightly. Adds $140 to the price, even if you had to wait to get 3rd one;
    #3  get 2 x 240GB for scratch and projects and 1 x 120GB for system (if your system is less than 50GB)
    I doubt you will find the difference of the system on the Sonnet Tempo a deciding factor.
    The Sonnet Tempo Pro is for higher I/O RAID, both Tempo cards support 2 x SSDs (I have the cheaper one)
    http://www.amazon.com/Samsung-Series-120GB-internal-MZ-7TD120BW/dp/B009NHAF06/
    PS: You have Mountain Lion. Buy Carbon Copy Cloner and it will clone the system and create the recovery volume also so you should not need to redownload 10.8.x - and you do not need the DVD with 10.6.4 again.

  • Installing SSD in new mac pro

    hello,
    looking into purchasing an ssd for soon arriving mac pro.
    already purchased a 16g memory and a 2T HHD upgrade.
    i came across the speed tests for ssd on start up and the ssd's seems pretty impressive. (OWC site)
    I'm going to be using the new mac pro primarily for processing landscape photograpy.
    PS5, LR5, autopan pro and the nik software are the programs that i wil be running most ot the time.
    files sizes sometimes reach 1+g.
    Question.
    If i install a new SSD, probably a 120G Mercury Electra from OWC in one of my bays what should be on it? Just OS?
    I have a 1T HHD that came with the MPro and I have another 2T HHD that I purchased for photo storage.
    Not quite sure how the two different types of HD's will work together from a speed standpoint
    Very new to this so any thoughts or suggestions would be welcome.
    Thank you.
    Owen

    Some folks buy themselves an SSD thinking they are going to get a great a performance boost. But the boost they get by only adding an SSD is that Applications launch faster, and not much else.
    If you want a bigger boost, and a boost across the board, move the user files off, leaving only System, Applications, Library, and the hidden unix files behind on the Boot Drive. Mac OS X is hugely over-configured on main memory. It is incessantly going back to the Boot Drive for a little of this, a little of that, and it moves the drive heads away from the data files you want to be reading and writing. Once you are not moving the heads away from your data to pick up system stuff all the time, your data drive will get faster.
    The big payback is using a Boot drive. An incremental improvement is using an especially fast spinning drive like a VelociRaptor 10K for your Boot Drive. An additional incremental improvement is using an SSD for your Boot drive.
    If you just add an SSD, but do not segregate the System, etc on its own drive, you pay top dollar for launching Applications faster. A big disappointment.
    japamac's Blog: Make Space for performance -- Moving the home folder

  • Can I have a SATA 600 SSD in my mac pro early 2011

    Hello,
    I have a Macbook Pro early 2011. And I am wondering if I can install a sata 600 SSD in my mac.
    I would like to place the SATA 600 SSD in my optical bay and keep my existing HDD in the normal bay.
    So, is this possible?
    Roy

    OGELTHORPE wrote:
    Csound1 wrote:
    Am le haghaidh lóin
    Any place but McDonalds. 
    Ciao.
    Any?
    OK.
    Istanbul, down by the Bosphorus, fresh fish for lunch

  • Adding USB IR Receiver to Mac Pro

    I've added a USB IR receiver to the Mac Pro but can't get the Mac to recognize the input from the receiver. The IR receiver blinks and shows it's receiving input from my Apple Remote but the Mac Pro does nothing. I'd like to use the Apple Remote for iTunes and Plex....maybe Front Row.
    Thanks and help would be great.

    There are only a couple of IR receivers that have drivers for the Mac and are compatible with the Apple Remote. Which one are you using? Here is a page that describes some alternatives:
    <http://twistedmelon.com/mira/hardware.html>
    The RF remotes that came with the ATI all-in-wonder video cards also work with the Mac. I've got one set up for Front Row, with some specially programmed keys to open/close the DVD drive, and power up or put the computer to sleep.

  • Ssd for new mac pro

    Is there a 3. party ssd 1tb on the market,
    which fits in the new mac pro?
    Greetings,
    abo

    Helios2 Thunderbolt2 with multiple PCIe 2.x controllers and SSDs 20Gb/sec
    http://www.macperformanceguide.com/blog/2014/20140324_1-Helios2-and-128GB.html
    Price on Samsung 840 EVO 1TB is nice. Eventually look for PCIe based SSD the same as found internally capable of 1.2Gb and probably more, Samsung intends to have retail kits in 2014.
    With a couple SSDs and controllers you should be able to quite nicely.

  • Ssd boot issue Mac Pro and MAvericks

    Hello there,
    So here is a good one.
    I am running the latest of Mavericks on a Mac Pro late  2009
    One of the disk was getting really noisy and slow so I decided to upgrade to SSD.
    I used the disk  utility to clone the main drive to the SSD and then used the Start up tool to boot from the new SSD.
    So far no issue.
    BUT after the next reboot i get a white screen.
    I boot from the installation disk and check the disk utility and everything is there.
    I decide to restore a Time Machine image of my main drive just in case but same thing.
    I re-check the disk utility and the back up has been done properly (name , size etc ..) but still cannot boot.
    When I check the details of the disk it says that IT IS bootable but when I open the Start up tool form the installation DVD, it doesnt see any bootable disk .
    At this point I am kind of lost.
    I don't use any cable for the SSD, it is directly plugged to the motherboard though the disk slot.
    Thanks.

    Which Icy Dock type adapter are you using for it? it won't plug in properly w/o one.
    You will need to use one of the TRIM enablers for your Samsung - I have half a dozen of them from the 830 128GB thru the 840 EVO 250 and 500GB
    They work fine.
    Not all cloning goes as planned and there I think Carbon Copy Cloner is ideal or best, along with the fact it makes it easy to include a Recovery partition when you do.
    Also there should be about 11% free space set aside as spare page cells.
    Turbo-write is an iffy feature and you wouldn't be using it. Data Migration is a great Windows clone program but only works to clone TO a Samsung SSD regardless of source - I like it enough to buy two Samsung SSDs. And their programs

  • SSD Question for Mac Pro 1,1

    Would either of these SSD's work as an OS Boot Drive for a Mac Pro 1,1?
    http://www.newegg.com/Product/Product.aspx?Item=N82E16820322012
    http://www.newegg.com/Product/Product.aspx?Item=N82E16820141419

    Here are the specs of each drive
    1st
    General
    Brand Imation
    Series M-Class
    Model 27509
    Device Type Internal Solid State Drive (SSD)
    Architecture MLC
    Expansion / Connectivity
    Form Factor 2.5"
    Capacity 32GB
    Interface Type SATA II
    Features FAST
    Performance
    Sequential Access - Read 150MB/s
    Sequential Access - Write 90MB/s
    2ND
    General
    Brand PQI
    Model DK9320GD3R000A03
    Device Type Internal Solid State Drive (SSD)
    Architecture MLC
    Expansion / Connectivity
    Form Factor 2.5"
    Capacity 32GB
    Interface Type SATA II
    Features Intel MLC
    Performance
    Max Shock Resistance 1500G
    Max Vibration Resistance 20G
    Sequential Access - Read up to 170MB/s
    Sequential Access - Write up to 100MB/s
    MTBF 1,500,000 hours
    They both say sata 2. Will that work on a first gen Mac Pro?
    Message was edited by: thehenry
    Message was edited by: thehenry

  • Intel 530 series SSD in a Mac Pro - can't warm restart

    Has anyone tried an Intel 530 series SSD (I have a 240GB) with their Mac? I just put one into my Mac Pro and installed a fresh copy of 10.8. If I try a "warm" restart it will hang on boot - I get a "circle-slash" and verbose mode shows "still waiting for root device". But if I turn the machine off and cold boot it works fine.
    I've tried updating the SSD's firmware and went to 10.8.5 - still doesn't work. I even tried another identical SSD, no luck. Do you think this is a bug in the drive or an incompatibility in the Mac OS? I've posted a similar question on Intel's forum.
    Thanks!

    Hi
    Instead of spending more time on these SSD's I returned them and instead bought Samsung 840 Pro's, which works with no problems.
    If you want to check what is happening with the firmware for the Intel SSD, you can follow this thread at Intel: https://communities.intel.com/thread/44258?start=0&tstart=0
    Kind regards
    Pär-Anders

  • MTron Pro 7000 64gb Solid State Drive (SSD) in my Mac Pro: Am I the first?

    All -
    Just purchased the MTron Pro 7000 64gb 3.5" SATA SSD drive a couple of days ago and popped it into Bay 1 of my Mac Pro (2.66ghz Quad - 4gb Ram).
    Installed Leopard on it -- unbelievable! Boots in about 6-8 seconds! (I don't even see the swirling wheel appear under the apple symbol!).
    Used bootcamp to partition it evenly (32gb/32gb) and installed Vista Ultimate and it is working nicely as well.
    Under Vista, I've run into the Intel speed "Cap" and the drive tops out at about 75-78MBps (almost 10MBps slower than the Raptor it replaced) -- but with such low latency (.1 ms) it definately seems snappier than the Raptor was. I hope Intel issues a driver fix for this.
    Under Leopard however, using XBench, I am seeing sequential reads in the 99-100MBps range!!! This is why I think the problem under Windows is an Intel driver issue.
    Anyway -- just wanted to share my findings with you guys -- happy camper here!
    Aaron
    Message was edited by: NYCubby

    Here's Xbench results for my RAID 0 SSD drives using a Mac Pro RAID card:
    Results 379.72
    System Info
    Xbench Version 1.3
    System Version 10.5.2 (9C31)
    Physical RAM 4096 MB
    Model MacPro3,1
    Drive Type APPLE RAID Card
    Disk Test 379.72
    Sequential 267.53
    Uncached Write 431.98 265.23 MB/sec [4K blocks]
    Uncached Write 385.73 218.24 MB/sec [256K blocks]
    Uncached Read 121.23 35.48 MB/sec [4K blocks]
    Uncached Read 557.09 279.99 MB/sec [256K blocks]
    Random 653.98
    Uncached Write 710.63 75.23 MB/sec [4K blocks]
    Uncached Write 329.15 105.37 MB/sec [256K blocks]
    Uncached Read 2581.19 18.29 MB/sec [4K blocks]
    Uncached Read 779.03 144.55 MB/sec [256K blocks]

  • Is the Apple SSD Kit for Mac Pro 4 SSDs?

    Is the kit 4 SSDs or one?

    No one pretty much in their right mind would buy an SSD to install in a tower Mac Pro from Apple. You are better off going to Newegg or Amazon or somewhere and just get what you need - usually a 128GB is fine for the OS and applications and would be a waste to put or use for media and data files. In fact, most of your home folder sub folders just go on a 1 or 2TB 7.2K drive.
    There are people that want more. That go with SSD on a PCIe controller for instance. After they maxed out to 48 or 64GB RAM or more.
    Besides the SATA ports in the Mac Pro can't provide enough bandwidth to drive more than two concurrent SSDs in an array, they share 800MB/sec (what two SATA3 SSDs can push).
    Intel, Samsung, Corsair all today have excellent SSDs and the 128GB run $89-129 while 180GB go for $149-200 etc.

  • Installation of four 2,5" SSD in the Mac Pro

    Hi all !
    I've put 4 SSD OCZ Vertex Turbo Series in my Mac Pro and i'm searching for something to adapt them on the 3,5" bracket of the Mac Pro.
    I've tried these :http://www.ocztechnology.com/products/solidstate_drives/ocz_solid_state_drive_3_5-adaptor_bracket2
    But it's not compatible with the mac pro...
    An idea ???

    MaxConnect sells one but costs $49 each.
    There are some really good threads here on SSD and should have links to products.
    http://www.transintl.com/store/category.cfm?category=2787
    http://www.transintl.com/store/category.cfm?category=2777
    http://www.transintl.com/store/category.cfm?category=2791
    Realize that you max out bandwidth with just three, so you may want to add PCIe.

  • Adding new hard drive to Mac Pro (quad core)

    I've just ordered a new Mac Pro quad core (2.66 GHz) with one GB HD. Since Apple is charging £240 for a second drive I decided to get it from somewhere else. I found a 1GB Western Digital Caviar Green but I also noticed 1GB WD Caviar Black. I wonder if anybody has any experience of those drives and would they work with the latest Mac Pro ?
    Does anybody knows what make of drive is Apple using in their latest Mac Pros ?
    Tom

    *WD Caviar Black 640GB*
    HD Tune: WDC WD6401AALS-00L3B2 Benchmark
    Transfer Rate Minimum : 59.1 MB/sec
    Transfer Rate Maximum : 118.1 MB/sec
    Transfer Rate Average : 96.4 MB/sec
    Access Time : 11.8 ms
    Burst Rate : 125.3 MB/sec
    *Black Caviar 1TB:*
    HD Tune: WDC WD1001FALS-00J7B Benchmark
    Transfer Rate Minimum : 53.9 MB/sec
    Transfer Rate Maximum : 108.7 MB/sec
    Transfer Rate Average : 86.1 MB/sec
    Access Time : 12.9 ms
    Burst Rate : 111.5 MB/sec
    +(note the slower average to the smaller 640GB model)+
    *Green Power 1TB*
    HD Tune: WDC WD10EADS-00L5B1 Benchmark
    12-23-2008
    Transfer Rate Minimum : 41.6 MB/sec
    Transfer Rate Maximum : 95.6 MB/sec
    Transfer Rate Average : 74.3 MB/sec
    Access Time : 14.0 ms
    Burst Rate : 117.2 MB/sec
    *WD Caviar Blue 640GB*
    HD Tune: WDC WD6400AAKS-00A7B Benchmark
    Transfer Rate Minimum : 55.6 MB/sec
    Transfer Rate Maximum : 113.3 MB/sec
    Transfer Rate Average : 90.2 MB/sec
    Access Time : 11.8 ms
    Burst Rate : 112.9 MB/sec
    the 32MB cache did not make a real or noticeable difference in benchmarks
    http://www.barefeats.com/hard112.html

Maybe you are looking for