Adding additional field in cProject is not working after transporting

Hi All,
My intention is to add additional field in cProject. So i copied a required view through program BSP_CUSTOMIZE and into another Z* BSP Application object. Then i had done the necessary modification on the view and saved. Then copied error.do controller and actived and tested in development server. It was working fine. So i moved the transport request for this object to quality system. When i tried to test the same thing in quality system, changes done in views are not reflecting.
When i checked the entries in table BSP_APPLC, i didnt find any. I hope this is the reason why my changes in views are not reflected.
Can anyone have idea, why it is not happening so. Kindly help.
Thanks in advance.
Regards,
Karthick

Ensure that in table BSP_APPLC is an entry for cprojects linking to your own aplictaion Zcprojects and is activated.
I guess you have to reactivate the BSP_CUSTOMIZE in target system again.
Please remeber: BSP_CUSTOMIZE is not supported officially.

Similar Messages

  • MB_DOCUMENT_BADI Not Working after Transport

    Hi Experts
    I have created an implementation of the MB_DOCUMENT_BADI in our ECC6 system to perform some processing as part of the goods issue process.  The code has been unit tested and works as required.  I have transported the development to our QA system but despite the implementation showing as active the code is not executed.
    Having put a break point on the exit handler class this BADI does not get called in our test system.  Has anyone resolved this or a similar issue before? How can I identify why the badi is not being called?
    I'm not sure if this is an ABAP / transport issue or an MM configuration issue, but any help would ge gratefully accepted as I need to get this working and into our live system as a matter of urgency.
    Thanks
    Andrew

    Hi Shiva
    I have already got a breakpoint at this point and it does not hit this.  I have added a breakpoint in the method of the earlier implementation and this is not being hit either. 
    I now need to identify if this is not being hit as a result of my changes, or whether this implementation was not working before my transport, e.g. after our system upgrade that was completed last year.
    Kind regards
    Andrew

  • Hierarchy Analysis Authorization does not work after transport

    Hi Gurus,
    I am facing a issue in hierarchy analysis authorization in quality system but the same authorization works perfectly fine in development.
    All hierarchy authorizations works in Quality except for this one. I found one old sap note describing this as program error but this note is not applicable in BW 7.3.
    I have checked the table RSECVAL, RSECHIER and authorization is active so everything looks good. Please advise if anyone faced this issue after transporting hierarchy auths to other systems
    Regards,
    Salman

    Salman,
    What I understood from your description is that you have same role+AA in Dev and QA, which provides access in Dev for all the nodes for said hierarchy but in QA, same role+AA provides access to the same hierarchy for all the nodes but one. Try to create a ZTEST analysis authorization in QA itself with access for the problematic hierarchy node and see if it works ? This will rule out the case if there is a difference in hierarchy in DEV & QA.
    Regards,
    Shivraj Singh

  • Web template with HTML framset not working after transport

    Hi,
    I've built a frameset which consists of two web-templates (role-menu and content area) those two are combined together using plain HTML which does not acontain any web items (uploaded via WAD). This works fine in development. After transporting to our QA environment all the templates have been transported with concode 0, but the frameset does not get loaded. I always get an "Error loading template ...". The two templates which contain web items work fine when used stand-alone.
    When looking in transport connection I see the following message:
    "Object ZWF_WEB_FRAMESET (Web Template Name) could not be collected for object ()"
    I also see the same behavior on another transport of a template. Nine out of ten ar fine, but one, all are exact copies - only the query used is different, does not work either. The query that is used has been transported and is working.
    Has anybody an idea what could cause this?
    Is there a way to regenerate templates (like RSRT for queries) ?
    Thanks in advance
    Bernd Dümmel
    KODAK Stuttgart
      using ve created a

    Did you upload the video?
    Did you provide the correct path to your HTML object?

  • MV45AFZZ Enhancement Not Working after Transport

    Hi Experts
    As part of a business requirement for additional checks when saving a sales order I have implemented an enhancement in the form USEREXIT_SAVE_DOCUMENT_PREPARE of the include MV45AFZZ of SAPMV45A.  This was done via SE38 and switching to enhancement mode and then creating an implicit enhancement.  I added my code in this enhancement, activated and tested in our development system without any issues.
    Subsequently these changes were transported to our QA system for further testing however, the enhancement is not being executed.  Looking in SE38 at the include I can see the enhancement and the code I have added, the include is active but if I try and put an external break-point in the code it does not allow me to, which suggests to me that it is not actually active. 
    When looking at this include in the debugger, the code does not show, again suggesting that it is not active, but I have checked everything I can think of and it looks like it should be active.
    Has anyone seen this before, or have any advice on how to resolve this issue?
    Thanks
    Andrew Beavan

    I resolved the problem by regenerating the program SAPMV45A. (I award myself full points - but deduct 10 for being obtuse!)
    Kind regards
    Andrew Beavan

  • Query execution is not working after transports to Production

    Hello All,
    I have released a complete data model for SAP HR from BW Dev to BW Prod. But when I generate a query and try to execute it, I am getting the below mentioned error.
    ANo value could be determined for variable ZEMND001.
    ESpecify a value for variable ZEMND001
    ASystem error in program SAPLRRK0 and form APPEND_KHANDLE_1-01-
    I have transferred the global settings as well, but the error still persists.
    Kinfly Help.
    Thanks in adv.
    Regards,
    KP

    Hi,
    Have you tested any query without using this variable ?  if you can create a query w/o this variable, tht will show whether the problem is with your user exit where in the variable values r not getting populated or with the program SAPLRRK0 ;
    Also check the query using RSRT, what error it shows, if possible run it in debug mode over there, with break point in your userexit.
    I hope this will help to show where the problem could be
    Best regards,
    shakeel

  • FBL5N : Adding additional field PERNR  to layout

    Hi experts,
    I had added additional field PERNR - personnel number in FBL5N layout for displaying in output.
    I had added pernr- personnel number by following the path
    SPRO -> Financial accounting ( new ) -> accounts receivable and accounts payable-> customer accounts ->line items -> display line items -> define additional fields for line item dispaly
    here i added bseg - pernr
    after adding , in FBL5N layout the field is appearing , but it is displaying blank in output  .
    Is there any thing needs to be done to display additional field in output of FBL5N.
    kindly give me any suggestions.
    thanks & tregards,
    Raghul
    Edited by: Raghul Gandhi on Mar 23, 2010 9:30 AM

    Hi,
    FBL5N: customer line item display.
    BSEG-PERNR: personnel number.
    Under which circumstances should BSEG-PERNR contain a value if you create customer related postings?
    If there is no personnel number given during posting (why should it?)  the field added to the FBL5N-layout will be empty.
    Best regards, Christian

  • BW Field level Autorizations are not working in the WEBI Reports

    Dear All,
    1. I have created Authorization roles with Infoobjects Authorization Objects.
    2. In Bex Query Authoizations are working on the Infoobjects like for
    Ex: For USER1 I have given Company code = 1000 &
    User 2 I have given authorization for 1100.....
    3. Import those roles into Business Objects-CMC.
    4.Users were Imported.
    But in the WEBI Reports BW Field level Authorizations are not working i.e for USER1 authorization for Company code is 1000 , in WEBI report it is showing all the Company codes data for USER1.
    For USER2 also showing all the data in the WEBI report.
    Plz help me on this issue.
    Thanks,
    Kiran Manyam

    Hi,
    For Authorization to work in BO you can check the following:
    1. You need to create authorization variables in your BEx query.
         Also these variables should not be input ready.
    2. While creating universe in BO you need to select "Single Sign On" option available in the parameters iwhile creating a new
        connection.
    Regards,
    Rohit

  • Autocomplete does not work after adding controller to LOV

    Hi experts ,
    Autocomplete does not work after adding controller to LOV Region, i have checked the fnd_compatialbe mode it is fine.validation proprty is also false, stilll it is not working.
    can anyone help me its very urgent
    regards
    vamsi

    Hi Tapash,
    This resolved the problem. Many thanks for your help with this it has been driving me mad for the last few days.
    I could not understand why the standard Apps LOV regions had controller's attached to them and the autocomplete would function but with my pages it would not.
    I actually raised a TAR about this and got nothing back so have updated it with the resolution.
    Thanks again.
    Regards,
    David

  • Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

    Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

    @ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
    @ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!) 
    @ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack.  i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot. 
    Thanks fo rall yor help!

  • File- Export not working after upgrade from 11i to R12

    Hi,
    File -> Export not working after upgrade from 11i to R12.1.3 in few systems. Can you please let me know what could be the issue.
    If export record count more than 200 it is working fine in all the systems and if change the profile option "Export MIME type” value to ‘text/tab-separated-values’ from application/excel also it is wokring.
    Thanks and Regards,
    Jagadeesha

    Enabled the FRD. Below are few last lines. Can you please let me know what i can in this log file contents.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
    In Argument 0 - Type: Integer Value: 196613
    In Argument 1 - Type: Number Value: 54
    Out Argument 0 - Type: String Value: 12
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Entering app_menu.set_prop.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing FIND_MENU_ITEM Built-in:
    In Argument 0 - Type: String Value: FILE.EXPORT
    Out Argument 0 - Type: Integer Value: 19
    Executing GET_MENU_ITEM_PROPERTY Built-in:
    In Argument 0 - Type: Integer Value: 19
    In Argument 1 - Type: Number Value: 79
    Out Argument 0 - Type: String Value: TRUE
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed app_menu.set_prop.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed app_synch.menu_toolbar_sync. Event is WHEN-NEW-ITEM-INSTANCE.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
    Out Argument 0 - Type: String Value: NORMAL
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
    Out Argument 0 - Type: String Value: NORMAL
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: NULL
    In Argument 1 - Type: String Value: GLOBAL.OUT
    Executing USER_EXIT Built-in:
    In Argument 0 - Type: String Value: FND GETPROFILE NAME="UPK_RECORDING_ENABLED" FIELD="GLOBAL.OUT" N
    FNDCPVCM, 11, Built-In, Entry, 316509814, USER_EXIT
    FNDCPVCM, 11, Built-In, Exit, 316509814, USER_EXIT
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: GLOBAL.OUT
    Out Argument 0 - Type: String Value: N
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_form
    Out Argument 0 - Type: String Value: FNDCPVCM
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_block
    Out Argument 0 - Type: String Value: MASTER
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_form
    Out Argument 0 - Type: String Value: FNDCPVCM
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_block
    Out Argument 0 - Type: String Value: MASTER
    Executing GET_APPLICATION_PROPERTY Built-in:
    In Argument 0 - Type: Number Value: 75
    Out Argument 0 - Type: String Value: IHR40P
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed call_all_libraries. Event is WHEN-NEW-ITEM-INSTANCE.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed app_standard.event. Event is WHEN-NEW-ITEM-INSTANCE.
    In Argument 1 - Type: String Value: global.frd_debug
    FNDCPVCM, 10, Prog Unit, Exit, 316509814, /FNDCPVCM-3/P45_30_DEC_201223_28_33
    FNDCPVCM, 9, Trigger, Exit, 316509814, WHEN-NEW-ITEM-INSTANCE
    FNDCPVCM, 8, Prog Unit, Exit, 316509814, /DMU-4/P8_30_DEC_201223_23_12
    # 15 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301498413820
    WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3
    # 16 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301512613925
    WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3

  • Hp Mini 110 1013tu Keyboard is Not working after upgrade to win 7

    Hello need help on weird happenings to my keyboard..
    Before i upgrade the Operating System From Windows XP to Windows 7 the Hp Mini 110 is working fine..
    All keys on keyboard is working and touchpad is also working.
    But after upgrading to windows 7 some keys on keyboard are not working like z,x,c,v, left ctrl and other more keys..
    what do you think is the problem??
    Hardware Issue? or Driver Issue?
    please help thank you..

    Hello @MysticDragon ,
    Welcome to the HP Forums!
    I understand some of the keys on your keyboard are not working after installing Windows 7.
    I do not see any drivers available for your notebook for Windows 7 on the HP website, so their might be some compatibility issues as it's going to rely on Windows update to find current drivers. This doesn't mean it will not work, but I cannot say for sure that it will.
    Try this:
    1. Click Start.
    2. Click Control Panel.
    3. Click Clock, Language, and Region.
    4. Click Region and Language.
    5. Click the Keyboards and Languages tab.
    6. Click Change keyboards...
    7. On the General tab, make sure English (United States) - US is selected in the Default input language field.
    8. Click on any other keyboards in the Installed services list.
    9. Click Remove.
    10. Repeat for all other non-English (United States) keyboards.
    You may also want to try rolling back to Windows XP and see if the issue persists. It is possible the issue is coincidental and not the direct result of the update to Windows 7.
    Let me know if this works!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

    My app store is not working after installing mavericks. When I open app store it repeatedly asking me to login with apple ID and to provide User name and Password for proxy authentication in a loop.I am a newbie to mac,Please help me.

    Hmmmm... would appear that you need to be actually logged in to enable the additional menu features.
    Have you tried deletting the plists for MAS?
    This page might help you out...
    http://www.macobserver.com/tmo/answers/how_to_identify_and_fix_problems_with_the _mac_app_store
    Failing that, I will have to throw this back to the forum to see if anyone else can advise further.
    Let me know how you get on?
    Thanks.

  • Content query web part is not working after chaning the DNS entry

    Hi all,
    We have a content query web part in the sharepoint site but it is not working after changing the DNS Entry for the web site ipaddress from one server to other . But it is working fine on the server, if we try to access the site from other system content
    quey server its not working fine and its giving error message as bellow.
    Unable to display this Web Part. To troubleshoot the problem, open this Web page in a Microsoft SharePoint Foundation-compatible HTML editor such as Microsoft SharePoint Designer. If the problem persists, contact your Web server administrator.
    Can anyone help me to fix this issue please.

    I have custom XSLT . But it is working fine before changing the dns entry as soon as we change the DNS entry the content quey web part is not working. I tried to delete the content query web part and add it once again to the page, As soon as content query
    web part is added to the page the fallowing error message is displayed.
    Unable to display this Web Part. To troubleshoot the problem, open this Web page in a Microsoft SharePoint Foundation-compatible HTML editor such as Microsoft SharePoint Designer. If the problem persists, contact your Web server administrator.
    Can anyone help me to fix this issue please.

  • Script does not work after download

    Hi,
       I have build a form in SAP enviornment using Adobe Life Cycle designer, while designing I have been using XML datasource and wrote scripts for different events on the elements of the form, the script works perfectly fine while designing, but fails when downloaded through an application. I downloaded form and to check if the scripts are still there or not, the script was present, but would not simply execute, for ex. while on clicking of button, certain fields on the form are to be hidden, but this would not work.
    ex. this.parent.parent.StaticText39.presence
    = "hidden";this.parent.parent.STELL_STEXT.presence
    = "hidden";
    The above scripts work perfect durong designing the form, but would not work after form is downloaded through an applciation. Could any one have answer to wierd behaviour?
    Regards,
    Shishir.P

    Was the form saved as a dynamic XML form?
    While the default preview in LiveCycle Designer may be set to dynamic XML form, thus providing the dynamic behaviour you are seeking, if the form is not saved as a dynamic XML form Adobe Reader and Acrobat will not respect the changes to the presence property at run-time.
    Steve

Maybe you are looking for