Adding additional monitors

I want to add two monitors to my laptop to use instead of the notebook's monitor.
Is there a way to use the two monitors with the laptop, powered on, but the lid closed?
What hardware is needed to connect the two monitors?

Hi,
I have not had a chance to test HP USB DisplayLink dock but I've got plenty of USB DisplayLink docks around me now and I also use them at home to get 3 monitors (2 external monitors and the laptop itself but I always close the laptop lid).
Please buy an USB dock with DisplayLink certified.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Mimo Monitor via USB and additional monitor via mini-display?

Hi,
I currently have a 2009 MBP, with a second monitor I attach via the mini-display port. I'm thinking of adding a USB monitor like this one - http://www.mimomonitors.com/products/imo-pivot-touch
Will the MBP/OS X support this additional screen?

I think this question might best be addressed to the makers of the monitor. I imagine they must have tested it with MBPs, and perhaps also with additional monitors.
Just out of curiosity, what do you plan to use the tiny monitor for? Its screen is even smaller than the 1984 128K Mac's, though its resolution is slightly higher.

Hi Guys, I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out

Hi Guys,
I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out as this web-site has been payed for by my client.
Alex

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Adding additional j2ee node

Hello,
we are running BI 7 - abap+java stacks with 16 GB ram (recently added)
i would like to know what is the thumb rule for adding additional j2ee node?
when is it neccassary to add additional j2ee node?
Regards,
Moshe

Hi,
The JLaunch starts a Java program. It loads the JVM into its own address space and then represents the required cluster element. The program can receive notification from the JControl process via named pipes to stop the cluster element, and terminates, if the JControl stops running (fork emulation under Windows).
So Jlaunch consuming high CPU time means that server, dispatcher or bootstrap process consume it. If there are not enough system or application threads avaliable means that the engine must buffering requests for web application or system processes. Things to check in this case are:
SAP NOTE 1016241 - J2EE Engine hangs because of unsufficient system threads
SAP note: 716604 and upgrade JDK.
SAP note: 723909 -> set correct VM parameters
and if issue persists, then you will need to analyse the application causing teh leak...
SAP note: 1259465: Memory analyser.
Regards,
Hemanth

Is it possible to have 2 additional monitors?

Is it possible for me to have two additional monitors attached to my iMac? Making it a total of three screens?

You would need a device similar to the below to do this:
http://www.matrox.com/graphics/en/products/gxm/dh2go/
Glor

Additional monitor and keyboard for IdeaPad U310

Hi.
I want a new laptop and I'm thinking of buying U310, but I have some questions.
Now I have a desktop computer and a 23" monitor. I'd like to keep the monitor and wireless keyboard. Is it possible to connect them to U310 - I'd like to use external keyboard and 23" monitor while using U310 on my desk.
I use similar combination at work, but I have ThinkPad and docking station.
Is the combination of U310 and external keyboard & additional monitor possible?
Thanx.

Hi
Welcome To Lenovo Community
Yes you can use the external monitor and wireless mouse
Hope This Helps
Cheers!!!
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español

How do I add an additional monitor on iMac 27" 3.06?

How do I add an additional monitor on iMac 27" 3.06? This is a 2012 vintage iMac without an auxiliary monitor terminal.

my 2011 21" imac it was just connecting a mini displayport to dvi converter and bang! my 24" dell monitor came alive

Running 2 additional monitors?

Hi there, running a new-ish 21.5" iMac. Already have one external monitor hooked up and running smoothly with the iMac display, wondering if there's any way I can hook a second one up at the same time. Maybe a pigtail splitter running from the display out? Dont want to spend money on hardware if I'm not sure I'll be able to use it.
Thanks!

There is no easy standard way of attaching a second monitor to your iMac.
One option is usb to VGA or DVI adaptor which used DisplayPort technology, how ever from what i have ready you can't do anything graphic intensive like gaming on them.
Second Option is Matrox DualHead2Go or TrippleHead2Go, which allows 2 or 3 additional monitors to be connected. However all the additional Monitors are detected as one, which in scenarios for me defeated the purpose.

Adding Additional Columns in LOV,That column capturing values from function

My requirement:
Adding Additional Columns in LOV,That column values capturing values returned by function.....
Give me the ides to achieve this...

Hi Subramaniam,
If your requirement is to call a Database function then please make use of the below code ,
import java.sql.CallableStatement;
import java.sql.SQLException;
import oracle.apps.fnd.framework.server.OADBTransactionImpl;
OAApplicationModule oaapplicationmodule = oapagecontext.getApplicationModule(oawebbean);
OADBTransactionImpl txn = (OADBTransactionImpl)oaapplicationmodule.getOADBTransaction();
CallableStatement cs = txn.createCallableStatement ("begin :1 := xxpackageName.xxfunctionname(:2,:3); end;",-1);//Replace your function Name
try
cs.registerOutParameter(1, Types.VARCHAR);
cs.setString(2,InputParam1); // InputParam1 is the name of variable captured from the OAF page and passed into function as input parameter
cs.setString(3,InputParam2); //InputParam2 is the name of variable captured from the OAF page and passed into function as input parameter
String outParamValue = null; // outParamValue will capture the value returned by function .
cs.execute();
outParamValue = cs.getString(1);
catch(SQLException sqle)
throw new RuntimeException(sqle);
finally
cs.close();
Let me know if its not clear .
Keerthi
Edited by: keerthioaf on Nov 23, 2012 5:17 AM

FBL5N : Adding additional field PERNR to layout

Hi experts,
I had added additional field PERNR - personnel number in FBL5N layout for displaying in output.
I had added pernr- personnel number by following the path
SPRO -> Financial accounting ( new ) -> accounts receivable and accounts payable-> customer accounts ->line items -> display line items -> define additional fields for line item dispaly
here i added bseg - pernr
after adding , in FBL5N layout the field is appearing , but it is displaying blank in output .
Is there any thing needs to be done to display additional field in output of FBL5N.
kindly give me any suggestions.
thanks & tregards,
Raghul
Edited by: Raghul Gandhi on Mar 23, 2010 9:30 AM

Hi,
FBL5N: customer line item display.
BSEG-PERNR: personnel number.
Under which circumstances should BSEG-PERNR contain a value if you create customer related postings?
If there is no personnel number given during posting (why should it?) the field added to the FBL5N-layout will be empty.
Best regards, Christian

Adding additional tables to the extractor configuration

Hi Experts,
Can you please help me adding additional tables to the SAP extractor and to configure the field data in the orgstructure to show a flag against the position.
Luke - I have tried using the option said by you from Application-wide Settings-->Data Centre --> Read SAP Table, it has properly save the added table, but not able to see it from SAP extractor configruation and not able to extract any data. Also, can you please guide me how to use the fields from this table (HRP1010) to write a small piece of logic to show a flag for a particualr position based on data.
Thanks in advance,
Purandhar

Hi Purandhar,
I have tried using the option said by you from Application-wide Settings-->Data Centre
--> Read SAP Table, it has properly save the added table, but not able to see it from
SAP extractor configruation and not able to extract any data.
This has probably added a data element - I would check in the dataelementconfiguration folder in your build's .delta folder. IF so then you have the first step completed. Now you need to add the necessary configurations to use the data that comes through this data element.
Go to your orgchart/hierarchy and navigate to Views. Here select your view (or your first view if this needs to be done for more than one view - if so you'll need to repeate these steps but not the step you already did in the Data Centre), and then click the + icon next to Design Details. Here you can add a new linked detail to your view detail. Simply give it a name, select the detail to link it to (usually the top level detail which is in blue), select a link field and then select your data element that was created in the Data Centre.
Now if you try to add a section to your view inside the Design Details view designer you will see your new detail added. You can then select it and add fields from this detail.
Also, can you please guide me how to use the fields from this table (HRP1010) to write
a small piece of logic to show a flag for a particualr position based on data.
Once you have been able to add the data in the views designer you will probably need to do some XML and XSL editing because you cannot edit XSL files in the AdminConsole and you will need to do this to get your icon/flag to show.
First of all you need to create a new XSL file and put it into a folder in your .delta\root folder. For example, My_XSL_files. Here you need to write the code to render your flag based on your variable. You can find plenty of examples in all of the pre-existing XSL files. Then you need to copy PresentationResources.xml to .delta\root\XML and add the reference to your new XSL file.
Go to your build's .delta folder and go to detailconfiguration. Find the detail you just created and open it. You'll find a section in their that you just added with a reference to an XSL file (e.g. if you added a Simple Caption section it will probably be something like SimpleCaptionXSL). Change this to the reference in the PresentationResources.xml.
Load your build in the AdminConsole and hit Publish. Once done you should see your icon. Sometimes if your XSL is invalid or the code doesn't work you won't see anything. This is not unusual as the whole process can be quite tricky - even for us with lots of experience!
Good luck!
Luke

Adding additional sld

Hello,
we have 1 sld - configured on the portal dev -
i would like to add additional sld - configure it on the portal production - all the production systems will be added to this sld, and all the qa and dev systems will remain on the sld opn the portal dev
what are the specific pahses in adding additional sld , updating it if neccasary, and moving the relevent systems
Regards,
Moshe

Hi
The task could be done like this:
1) Activate the SLD in the EP prod and configure post-processing accord. to SLD guide
2) Ensure that the DEV-SLD and new PRD-SLD has the same CIM model version and SAP_CR version
3) Export the content from DEV-SLD (export line ALL)
4) Import this export into PRD-SLD
5) Configure all production systems "SLD data provider" to send technical data to PRD-SLD
6) Configure all production systems "SLD client role" to work with PRD-SLD
...now the DEV-SLD will only get technical data from the non-productions systems. If you want both SLD's to have a full view of alle systems then ALL systems could use PRD-SLD as target for their data suppliers and a sync from PRD-SLD to DEV-SLD can be set up... You maybe also need to supplement this strategy with manuel export/import of SLD content.
BR
Tom Bo

Adding additional dimensions in HFM

Hi Experts,
Need your advice.
Present scenario: we have an HFM application which is pulling data from Peoplesoft transactional system. for the current application we have created 4 custom dimension and based on it all the mappings were done.
Required:there is a requirement for adding additional custom dimension.
i just want to know if it is possible to add additional custom dimension in the present application without affecting the previous data within the application.
please advice the steps and the precautions to be taken.
will such addition affect the previous period data?
Thanks in advance.

What version of HFM are you running?
If you are at 11.1.2.2 (or higher I would imagine), then following link seems to provide some basic instructions on this process:
http://blog.topdownconsulting.com/2015/01/adding-custom-dimensions-hfm/
I would think about:
(1) Is an additional dimension necessary - could you possibly split up an existing custom dimension (in the past, when only 4 custom dims were allowed, many times a dimension would serve dual purposes),
(2) If you do decide to add a new dimension, this would be a major change that would effect all aspects of the application (data loading, reporting, historical data, consolidation rules, forms, grids, etc) - so, do you have a test system you could experiment with? At the very least you would want to make a copy of the current app and convert the copy as a test,
(3) probably you would want to do a thorough analysis of your consolidation rules before hand to see what the implications are of adding the new dim.

Improve Portal performance with BI-Java by adding additional server node.

Hi SAP Expert
I wonder anyone might have attempted this before,
In an environment with BI-Java and Portal Java stack installed on the same server, is it possible to improve the system performance by adding additional portal server node? or is there any improvement seen by adding the extra server node?
I am after suggestion and experience on how the portal performance can be improve, with consideration of BI-Java sharing Portal resources.
Any comment will be most appreciated.

Hi Jim,
We've this configuration at our site, Portal and BI running together (not federated). Recommendations would be to:
1. Set a sensibly large max heap size on each server node of Portal (at least 2GB if not larger) and implement several nodes at least. For example we have 4 x physical nodes, each running 3 server nodes of 2GB max heap size apiece so a total of 12 nodes.
2. Implement the BI Safety Belt for large results sets (1127156)
3. Implement the latest JVM / JDK you can on your environment. We found much improved performance after implementing JDK SR10 with the J9/2.3 options enabled e.g., -Xjvm:j9vm23
-Xsoftrefthreshold0
4. Patch your BI components on the Portal (BIBASES, BIWEBAPP etc) to the latest available patch level for your Portal SP level
5. Make sure all your RFC connections are load balanced to the backend and tuned for the kind of load you expect on your reports, and the BI is sized appropriately in terms of app servers and dialog work processes, RFC-enabled login groups in SMLG etc.
6. Consult notes 1048691 (especially useful, opions &PROFILING=X&TRACE=X added to reports for example for performance tracing), 937697, 1021921, 948158 for information about problem analysis for this scenario
7. Implement SAP Web Dispatcher for Portal to reduce load on static mime files
8. Tune the Portal application. There's plenty information on SDN related to Portal performance tuning.
I hope this helps!
Cheers,
Marc

Add additional monitor via USB

Hi all,
I have recently bought the Matrox Dualhead2Go to connect two additional monitors to my MBP. The device works well and the performance is excellent and easy to set up, however I didn't realise that it would mean the mac see's both my monitors as one big display (in my case 3360x1050). This means that things like dialog boxes popup in the middle of the displays (between the bezels). The solution is fine but it's not quite ideal.
I was wondering if there is a solution out there to allow me to add an additional display that is treated as a seperate display using something like USB, so I could have one monitor plugged into thunderbolt and another monitor plugged via USB which will give me 2x 1680x1050 instead of just 1x 3360x1050.
There's some usb to vga/dvi adapters available but wanted to find out if this will work or if there are any recommendations?
Thanks in advance,
Scott.

Hi Kelly,
Apologies for the delayed response.
Unfortunately I did not find a real solution to deal with the dialogue boxes, however I do use a great Mac program called Moom (http://manytricks.com/moom) which has a lot of helpful features for managing and resizing/maximising windows, etc.
One of the features I use is the ability to nudge windows left or right by a specified amount of pixels and bind it to a button on my mouse.
I have it set up so one of my mouse buttons nudges the active window left and another button to nudge the window right. All this is really doing is avoiding having to continuously click and drag dialogue boxes when they appear in the centre of the screen and instead is just a mouse button press away.
Not a very elegant solution, but it does reduce my mouse mileage by not having to drag stuff around all the time.
Hope this helps.

Adding additional monitors

Similar Messages

Maybe you are looking for