Adding an editable row in an non editable table.
Hi,
My requirement is to add an Editable row in a table which is in display mode only, i mean i cannot edit the data that is present in the table.
But if the user presses the Add Row button on the Table Toolbar, a new editable row should be added in the end, so that he can save the new data entered.
methods tried:
1: I have used Inputfield as Cell Editors, with their Read only Property check marked, thougt that with the new element created, it would not be Read Only.
2: Binded the read only property with a context attribute, but still was not able to achieve this functionality.
3: Tried the above two steps with the "Enabled" property of the Table Coloumn Cell Editors as well, but no result.
Please give me some pointers on this.
Regards,
Ashish
Hi Ashish,
The approach you were following was correct, but I am not sure where you have placed the Enabled property attribute in the context.
Please follow these steps:
1. The table you are creating should have the enabled property set.
2. The context with you are binding the table should have an additional attribute say ISENABLED of type boolean.
3. Bind this attribute with the ENABLED property of all the input enabled fields in your table.
4. When binding the non-editable data into the table, set this property to ABAP_FALSE for each record. This will make the existing data non editable.
5. Use the below code for adding a new row and set the ISENABLE property of the added row to ABAP_TRUE.
elem_table = node_table->create_element( ).
node_table->bind_element( new_item = elem_table set_initial_elements = abap_false ).
stru_table-isenable = abap_true .
elem_new_row->set_static_attributes( static_attributes = stru_table ).
Let me know how you go about it.
Cheers,
Pratibha
Similar Messages
-
SP which returns error cannot access rows from a non-nested table item.
Dear Experts
I have an SP which gives error " cannot access rows from a non-nested table item ". But here the strange thing is, it works fine with one query. But I write union query with another table, only then it gives error.
CREATE OR REPLACE PROCEDURE SP_MONTHLYSALESUMMARY (
P_TRANSACTIONMONTH VARCHAR2,
P_LEDGERID VARCHAR2,
O_RESULTSET OUT TYPES.CURSORTYPE)
AS
BEGIN
OPEN O_RESULTSET FOR
-- POINT OF SALE
SELECT
L.DESCRIPTION LEDGERNAME,
LS.DESCRIPTION LEDGERSUBGROUPNAME,
C.CORPORATENO
|| E.EMPLOYEENO
|| AF.AFFILIATEMEMBERNO
|| M.MEMBERNO
AS ID,
C.NAME || E.NAME || AF.NAME || M.NAME AS NAME,
SUM(CASE
WHEN PB.EMPLOYEE_ID IS NOT NULL
AND T.ISCREDITTRANSACTIONMODE = 2
THEN
PB.TAXAMOUNT
ELSE
0
END)
EMPLOYEEDEBITCARDTAXAMOUNT,
L.PRINTNO
FROM POINTOFSALEBILL PB
INNER JOIN POINTOFSALEBILLDETAIL PD
ON PB.POINTOFSALEBILL_ID = PD.POINTOFSALEBILL_ID
INNER JOIN TRANSACTIONTYPE TY
ON TY.TRANSACTIONTYPE_ID = PB.TRANSACTIONTYPE_ID
INNER JOIN TRANSACTIONMODE T
ON T.TRANSACTIONMODE_ID = PB.TRANSACTIONMODE_ID
INNER JOIN LEDGER L
ON L.LEDGER_ID = PD.LEDGER_ID
INNER JOIN LEDGERSUBGROUP LS
ON LS.LEDGERSUBGROUP_ID = L.LEDGERSUBGROUP_ID
LEFT JOIN CORPORATE C
ON C.CORPORATE_ID = PB.CORPORATE_ID
LEFT JOIN EMPLOYEE E
ON E.EMPLOYEE_ID = PB.EMPLOYEE_ID
LEFT JOIN AFFILIATEMEMBER AF
ON AF.AFFILIATEMEMBER_ID = PB.AFFILIATEMEMBER_ID
LEFT JOIN MEMBER M
ON M.MEMBER_ID = PB.MEMBER_ID
WHERE TY.ISDEBIT = 1 AND PB.FLAG = 0 AND T.ISROOMNO = 2
AND (P_TRANSACTIONMONTH IS NULL
OR P_TRANSACTIONMONTH =
TO_CHAR (PB.BILLDATE, 'fmMONTH-YYYY'))
AND (P_LEDGERID IS NULL
OR L.LEDGER_ID IN
( (SELECT COLUMN_VALUE
FROM TABLE(GET_ROWS_FROM_LIST1 (
P_LEDGERID,
GROUP BY L.DESCRIPTION,
LS.DESCRIPTION,
C.CORPORATENO
|| E.EMPLOYEENO
|| AF.AFFILIATEMEMBERNO
|| M.MEMBERNO,
C.NAME || E.NAME || AF.NAME || M.NAME,
L.PRINTNO;
END SP_MONTHLYSALESUMMARY;
GET_ROWS_FROM_LIST1 is a function, which i am using to pass " IN " to oracle. There is no problem with this, since it works fine with one query
REATE OR REPLACE FUNCTION BCLUB1868.GET_ROWS_FROM_LIST1
(L IN LONG DEFAULT NULL, SEP IN VARCHAR2 DEFAULT ',')
RETURN MYVARCHARTABLE1 PIPELINED
AS
L_POS INT := 1;
L_NEXT INT;
L_PART VARCHAR(500);
BEGIN
SELECT INSTR( L, SEP, L_POS) INTO L_NEXT FROM DUAL;
WHILE (L_NEXT>0)
LOOP
SELECT SUBSTR(L, L_POS, L_NEXT - L_POS) INTO L_PART FROM DUAL;
PIPE ROW(L_PART);
SELECT L_NEXT + 1, INSTR( L, SEP, L_POS)
INTO L_POS, L_NEXT FROM DUAL;
END LOOP;
SELECT SUBSTR(L, L_POS) INTO L_PART FROM DUAL;
PIPE ROW(L_PART);
RETURN;
END;
Request help from you all experts in the forumHere it is
CREATE OR REPLACE PROCEDURE SP_GRCS (
P_TRANSACTIONMONTH VARCHAR2,
P_LEDGERID VARCHAR2,
O_RESULTSET OUT TYPES.CURSORTYPE)
AS
BEGIN
OPEN O_RESULTSET FOR
-- Point of sale
SELECT *
FROM ( SELECT L.DESCRIPTION LEDGERNAME,
LS.DESCRIPTION LEDGERSUBGROUPNAME,
C.CORPORATENO
|| E.EMPLOYEENO
|| AF.AFFILIATEMEMBERNO
|| M.MEMBERNO
AS ID,
C.NAME || E.NAME || AF.NAME || M.NAME AS NAME,
SUM(CASE
WHEN PB.EMPLOYEE_ID IS NULL
AND T.ISCREDITTRANSACTIONMODE = 1
THEN
PB.BILLAMOUNT
ELSE
0
END)
MEMBERDEBITAMOUNT,
L.PRINTNO
FROM POINTOFSALEBILL PB
INNER JOIN POINTOFSALEBILLDETAIL PD
ON PB.POINTOFSALEBILL_ID = PD.POINTOFSALEBILL_ID
INNER JOIN TRANSACTIONTYPE TY
ON TY.TRANSACTIONTYPE_ID = PB.TRANSACTIONTYPE_ID
INNER JOIN TRANSACTIONMODE T
ON T.TRANSACTIONMODE_ID = PB.TRANSACTIONMODE_ID
INNER JOIN LEDGER L
ON L.LEDGER_ID = PD.LEDGER_ID
INNER JOIN LEDGERSUBGROUP LS
ON LS.LEDGERSUBGROUP_ID = L.LEDGERSUBGROUP_ID
LEFT JOIN CORPORATE C
ON C.CORPORATE_ID = PB.CORPORATE_ID
LEFT JOIN EMPLOYEE E
ON E.EMPLOYEE_ID = PB.EMPLOYEE_ID
LEFT JOIN AFFILIATEMEMBER AF
ON AF.AFFILIATEMEMBER_ID = PB.AFFILIATEMEMBER_ID
LEFT JOIN MEMBER M
ON M.MEMBER_ID = PB.MEMBER_ID
WHERE TY.ISDEBIT = 1 AND PB.FLAG = 0 AND T.ISROOMNO = 2
AND (P_TRANSACTIONMONTH IS NULL
OR P_TRANSACTIONMONTH =
TO_CHAR (PB.BILLDATE, 'fmMONTH-YYYY'))
AND (P_LEDGERID IS NULL
OR L.LEDGER_ID IN
( (SELECT COLUMN_VALUE
FROM TABLE(GET_ROWS_FROM_LIST1 (
P_LEDGERID,
GROUP BY L.DESCRIPTION,
LS.DESCRIPTION,
C.CORPORATENO
|| E.EMPLOYEENO
|| AF.AFFILIATEMEMBERNO
|| M.MEMBERNO,
C.NAME || E.NAME || AF.NAME || M.NAME,
L.PRINTNO
UNION ALL
-- Guest Registration
SELECT L.DESCRIPTION LEDGERNAME,
LS.DESCRIPTION LEDGERSUBGROUPNAME,
C.CORPORATENO
|| E.EMPLOYEENO
|| AF.AFFILIATEMEMBERNO
|| M.MEMBERNO
AS ID,
C.NAME || E.NAME || AF.NAME || M.NAME AS NAME,
SUM(CASE
WHEN PB.EMPLOYEE_ID IS NULL
AND T.ISCREDITTRANSACTIONMODE = 1
THEN
PB.BILLAMOUNT
ELSE
0
END)
MEMBERDEBITAMOUNT,
L.PRINTNO
FROM GUESTREGISTRATION PB
INNER JOIN GUESTREGISTRATIONDETAIL PD
ON PB.GUESTREGISTRATION_ID = PD.GUESTREGISTRATION_ID
INNER JOIN TRANSACTIONTYPE TY
ON TY.TRANSACTIONTYPE_ID = PB.TRANSACTIONTYPE_ID
INNER JOIN TRANSACTIONMODE T
ON T.TRANSACTIONMODE_ID = PB.TRANSACTIONMODE_ID
INNER JOIN LEDGER L
ON L.LEDGER_ID = PD.LEDGER_ID
INNER JOIN LEDGERSUBGROUP LS
ON LS.LEDGERSUBGROUP_ID = L.LEDGERSUBGROUP_ID
LEFT JOIN CORPORATE C
ON C.CORPORATE_ID = PB.CORPORATE_ID
LEFT JOIN EMPLOYEE E
ON E.EMPLOYEE_ID = PB.EMPLOYEE_ID
LEFT JOIN AFFILIATEMEMBER AF
ON AF.AFFILIATEMEMBER_ID = PB.AFFILIATEMEMBER_ID
LEFT JOIN MEMBER M
ON M.MEMBER_ID = PB.MEMBER_ID
WHERE TY.ISDEBIT = 1 AND PB.FLAG = 0 AND T.ISROOMNO = 2
AND (P_TRANSACTIONMONTH IS NULL
OR P_TRANSACTIONMONTH =
TO_CHAR (PB.BILLDATE, 'fmMONTH-YYYY'))
AND (P_LEDGERID IS NULL
OR L.LEDGER_ID IN
( (SELECT COLUMN_VALUE
FROM TABLE(GET_ROWS_FROM_LIST1 (
P_LEDGERID,
GROUP BY L.DESCRIPTION,
LS.DESCRIPTION,
C.CORPORATENO
|| E.EMPLOYEENO
|| AF.AFFILIATEMEMBERNO
|| M.MEMBERNO,
C.NAME || E.NAME || AF.NAME || M.NAME,
L.PRINTNO)
ORDER BY PRINTNO;
END SP_GRCS;
I have even tried adding L.Ledger_ID in select statement. -
ORA-22905: cannot access rows from a non-nested table item in Table func
I am using a table function in Oracle 8.1.7.4.0. I did declare an object type and a collection type like this:
CREATE TYPE t_obj AS OBJECT ...
CREATE TYPE t_tab AS TABLE OF t_obj;
My table function returns t_tab and is called like this:
SELECT ... FROM TABLE (CAST (my_pkg.table_fnc AS t_tab)) ...
This works pretty well as long as I run it in the same schema that owns the function and the 2 types. As soon as I run this query from another schema, I get an ORA-22905: cannot access rows from a non-nested table item error, even though I granted execute on both the types and the function to the other user and I created public synonyms for all 3 objects.
As soon as I specify the schema name of t_tab in the cast, the query runs fine:
SELECT ... FROM TABLE (CAST (my_pkg.table_fnc AS owner.t_tab)) ...
I don't like to have a schema hard coded in a query, therefore I'd like to do this without the schema. Any ideas of how to get around this error?Richard,
your 3 statements are correct. I'll go ahead and log a TAR.
Both DESCs return the same output when run as the other user. And, running the table function directly in SQL*Plus (SELECT my_pkg.table_fnc FROM dual;) also returns a result and no errors. The problem has to be in the CAST function.
Thanks for your help. -
ORA-22905: cannot access rows from a non-nested table item
Hi All,
This is the overview of the query used in the package.
select ename,empno,sal,deptno from
(select deptno from dept) a,
(select ename,empno,sal from emp1) b
where empno in (select * from table (pkg1.fun1('empno')))
and a.deptno=b.deptno
union
select ename,empno,sal,deptno from
(select deptno from dept) c,
(select ename,empno,sal from emp2) d
where empno in (select * from table (pkg1.fun1('empno')))
and c.deptno=d.deptno
Here the pkg1.fun1 will convert the string ('empno') into table form. ('empno') is the input parameter to the package and is a string of emp numbers.
compilation is successful. when this is executed the below error pops up
"ORA-22905: cannot access rows from a non-nested table item"
Is there any problem with the table function which i am using in this query
could anyone guide me to the solution.
Thanks AllI have used
CREATE OR REPLACE
type tab_num as table of number;
select * from table (cast(pkg1.fun1('empno')) as tab_num))
This throws an error during compilation itself
"PL/SQL: ORA-00932: inconsistent datatypes:expected number got varchar2 -
Oracle error ORA-22905: cannot access rows from a non-nested table item
Oracle error ORA-22905: cannot access rows from a non-nested table item
Creating a report using oracle plsql code .
Getting error ;
Oracle error ORA-22905: cannot access rows from a non-nested table item
when I am trying to pass data in clause in pl sql proc
basically I have a proc which takes 2 parameters(a and b)
proc (
P_a varchar2,
p_b varchar2,
OUT SYS_REFCURSOR
culprit code which is giving me the error and on google they say cast it but I dont know how to do it in my context
--where id in (
-- SELECT * FROM THE (SELECT p_cd_common.get_table_from_string(P_a) FROM dual)
-- union
-- SELECT * FROM THE (SELECT p_cd_common.get_table_from_string(P_b) FROM dual)
data sample returned from this :SELECT * FROM THE (SELECT p_cd_common.get_table_from_string(P_a) FROM dual)
'Abc','def',
data sample returned from this;SELECT * FROM THE (SELECT p_cd_common.get_table_from_string(P_b) FROM dual)
'fgd','fth',
Any answers ?
How to pass data in clause in a better wayWhy are you creating a duplicate post? I already asked you to post p_cd_common.get_table_from_string. In particular what is function return type and where it is declared. As I already mentioned, most likely function return type is declared in the package and therefore is PL/SQL type. And TABLE operator can only work with SQL types.
SY. -
Adding A row to a non editable ALV in ABAP Webdybpro
I have an ALV thats currently non editable. My requirement is that, when a User clicks on an Insert Row button, then a new row has to be inserted in the ALV and this row alone should become completley editable. Is there any means of doing this. I am aware of some standard editable buttons (such as Insert Row, Delete row etc) but somehow this does not meet my requirement as 1.I dont need some standard buttons such as Check and 2. The whole ALV has to be editable for these buttons to work.
There are options such as set_insert_row_allowed set_delete_row_allowed etc that lets you do this. And to the editable part of the questions, those rows can be bound to another attribute in a context and as per the needs that rows can be made editable or not.
-
hi ,
i need help on the below scenario ,
we have a web dynpro table with different columns, now based on new business requirement one of the column need to
dynamically editable or non editable for different row.
for ex :
Field 1
Field 2 ( Dynamic field )
Field 3
Field 4
Data 11
Data 12 ( Editable with Drop down )
data 13
data 14
Data 21
Data 22 ( Non editable )
Data 23
data 24
Data 31
data 32 ( Editable with drop down )
data 33
data 34
how to achieve this ? please help on this.
Thanks in advance
Thanks
ManishManish,
there is no proper way to insert two Cell Editors in a column(except variants), have a look on below scenario, it may help.
add one more attribute to your table context node for read-only.
create dropDown as celleditor for table and bind with newly created attribute to read-only property of dropdown.
before binding data to table, check the condition then mention readonly value abap_true / false.
@ we can achieve by the use of Variants.
for ex :
Data 11
Data 12 ( Editable with Drop down)
data 13
read-only - abap_false
Data 21
Data 22 ( Non editable, dropdown )
Data 23
read-only - abap_true
Data 31
data 32 ( Editable with drop down )
data 33
read-only - abap_false -
Mimic "show data as percent of row parent" in non-pivot table
Is it possible to implement or mimic the 'percentage of parent row' functionality, foreseen for pivot tables in obiee 11g, for a 'normal' table?
We use a rather fixed table, in which no drilling is allowed - conditions are applied by means of prompts and filters. The report is based upon the store dimension, which has as hierarchy: country > cluster > store. We have added a column to represent the 'share' of a store's net turnover in the cluster total. The results looks like:
country cluster store turnover share
======= ======= ===== ======== =====
belgium 1 a 20.000 66.7%
b 10.000 33.3%
cluster total: 30.000 100.0%
2 c 40.000 57.1%
d 30.000 42.9%
cluster total: 70.000 100.0%
country total: 100.000 100.0%
holland 3 e 50.000 71.4%
4 f 20.000 28.6%
cluster total: 70.000 100.0%
country total: 70.000 100.0%
grand total: 170.000 100.0%Instead of all the total levels showing as 100% however, we would like to see each sub-total represented as a percentage of the level above, much like the forementioned pivot table functionality. For the example above that would mean it should look like:
country cluster store turnover share
======= ======= ===== ======== =====
belgium 1 a 20.000 66.7%
b 10.000 33.3%
cluster total: 30.000 30.0%
2 c 40.000 57.1%
d 30.000 42.9%
cluster total: 70.000 70.0%
country total: 100.000 58.8%
holland 3 e 50.000 71.4%
4 f 20.000 28.6%
cluster total: 70.000 100.0%
country total: 70.000 41.2%
grand total: 170.000 100.0%Any advice or idea would be greatly appreciated...902360 wrote:
Hello,
I'd like to know if there's a way to configure the Pivot Table "Show Data As - Percent of" precision.
ATM, I have some reports using SR types where one of those are much bigger than the others.. So when the report its generated, it returns something like:
TYPE A: 99%
TYPE B: 0%
TYPE C: 0%
TYPE D: 0%
How can I show the other types correct value? Something like number of decimal places...
Ps: As criteria to this report, I have changed my Data Format to "Number", "Minus: -123" with 15 Decimal Places.
Thanks,
RamonYup. Can do. Read this link:
http://shivabizint.wordpress.com/2008/09/14/changing-the-precession-of-percent-of-columns-in-pivot-table-of-obiee/ -
ERROR:-22905:ORA-22905: cannot access rows from a non-nested table item
Hi. I have some code running on oracle 9i that gives me above error.
Following are my type declarations.
drop type_obj_tea_icore_glr;
drop type_tbl_tea_icore_glr;
create or replace type type_obj_tea_icore_glr as object (
ns_comp_id_parent number,
ns_comp_id_child number,
serv_item_id number,
glr_display_order number,
exchange_carrier_circuit_id varchar2(53)
show err
create or replace type type_tbl_tea_icore_glr as table of type_obj_tea_icore_glr;
show err
I have a function in an oracle package tea_icore_pkg with following signature.
FUNCTION sortpvcdesign (
p_document_number serv_req_si.document_number%TYPE,
p_pvc_serv_item_id serv_item.serv_item_id%TYPE,
p_orig_port_serv_item_id serv_item.serv_item_id%TYPE
RETURN type_tbl_tea_icore_glr
If I run following from SQL prompt, it works fine.
SELECT * FROM TABLE (tea_icore_pkg.sortpvcdesign(255082,2782636,2723752) );
But when I use that within another procedure of the same packge, as follows:
FOR glr_rec IN
(SELECT *
FROM TABLE
(CAST
(sortpvcdesign (c_pvcs.order_nbr,
c_pvcs.pvc_serv_item_id,
c_pvcs.orig_port_serv_item_id
) AS type_tbl_tea_icore_glr
LOOP
At the runtime, I got the above error message ( as referred to in subject ). I took all of the suggestions on CAST without much success. The user/schema is only one schema here. I mean, no permissions issue. I granted all on above types to public.
Can someone help?Bil,
I tried both with CAST and without CAST with specifying the colums. The same error.
OR glr_rec IN
(SELECT ns_comp_id_parent, ns_comp_id_child, serv_item_id,
glr_display_order, exchange_carrier_circuit_id
FROM TABLE
(CAST
(sortpvcdesign (c_pvcs.order_nbr,
c_pvcs.pvc_serv_item_id,
c_pvcs.orig_port_serv_item_id
) AS type_tbl_tea_icore_glr
LOOP -
Cannot access Rows from a non-nested table item..
create or replace package types
as
type cursorType is ref cursor;
end;
create or replace function sp_ListEmp
return types.cursortype
as
l_cursor types.cursorType;
begin
open l_cursor for select ename, empno from Scott.emp order by ename;
return l_cursor;
end;
=====================
Select * from Table (sp_ListEmp)
=====================
Can this Select by executed anyway without changing upper code.. I found some casting sort of solution but cannot get the exact one.. please helpOr this way:
HR%xe> select sp_listemp from dual;
SP_LISTEMP
CURSOR STATEMENT : 1
CURSOR STATEMENT : 1
LAST_NAME EMPLOYEE_ID
Abel 174
Ande 166
Atkinson 130
Austin 105
Baer 204
Baida 116
Banda 167
Bates 172
Bell 192
Bernstein 151
Bissot 129
LAST_NAME EMPLOYEE_ID
Bloom 169
Bull 185
Cabrio 187
Cambrault 154
Cambrault 148
Chen 110
Chung 188
Colmenares 119
Davies 142
De Haan 102
Dellinger 186
LAST_NAME EMPLOYEE_ID
Dilly 189
Doran 160
Ernst 104
Errazuriz 147
Everett 193
-- -
Setting Non-Editable property for selected Rows in jTable
Hi,
I want particular rows to be set non-editable within a jTable. For example. If I have seven rows as follows:
1
2 - (Non-editable)
3
4
5 - (Non-editable)
6
7
I want to set non-Editable property to the second & Fifth Rows(say) alone. Other Rows, I may edit.
How can I do this?
Thanks in adv.TableModel has method
boolean isCellEditable(int rowIndex,
int columnIndex)
so you need to make your table model return false for these rows. -
Make non-editable sections of webpage?
I'm designing a site using contribute. I'm wondering if I can
take a webpage that is already completed and make certain sections
of it uneditable.... such as the main links, or certain divs... Is
there a way to do this? Or can this only be accomplished with
templates?
Thanks so much for all and any help!This is possible to create by handcoding, but you have to
create editable regions and not non-editable regions.
Contribute understands the editable region code, also when
it's not a dreamweaver template (using dreamweaver templates of
course has a lot of other advantages).
The code you need looks like this:
<!-- TemplateBeginEditable name="content"
-->content<!-- TemplateEndEditable -->
Place it like this in your page and the lorem ipsum p's are
non editable, the sentence 'This content is editable...' is
editable. The head section and title are also editable (convenient
to adjust meta-tags through contribute):
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
<!-- TemplateBeginEditable name="doctitle" -->
<title>Untitled Document</title>
<!-- TemplateEndEditable -->
<!-- TemplateBeginEditable name="head" -->
<meta name="Keywords" content="keywords" />
<meta name="Description" content="description" />
<!-- TemplateEndEditable -->
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8" />
</head>
<body>
<p>"Lorem ipsum dolor sit amet, consectetur adipisicing
elit, sed do eiusmod tempor incididunt ut labore et dolore magna
aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco
laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure
dolor in reprehenderit in voluptate velit esse cillum dolore eu
fugiat nulla pariatur. Excepteur sint occaecat cupidatat non
proident, sunt in culpa qui officia deserunt mollit anim id est
laborum."</p>
<!-- TemplateBeginEditable name="content" -->This content
is editable...<!-- TemplateEndEditable -->
<p>"Lorem ipsum dolor sit amet, consectetur adipisicing
elit, sed do eiusmod tempor incididunt ut labore et dolore magna
aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco
laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure
dolor in reprehenderit in voluptate velit esse cillum dolore eu
fugiat nulla pariatur. Excepteur sint occaecat cupidatat non
proident, sunt in culpa qui officia deserunt mollit anim id est
laborum."</p>
</body>
</html> -
(non)Editable field on Myspace & Firefox 3.5/6
Symptom: flash app has an editable field that becomes non-editable on Myspace, but only when accessing it with Firefox 3.5 or 3.6;
What's more, it actually can be edited, as long as one right-clicks into the field.
The app is made with Flash Pro CS5 and embedded on Myspace using AddThis, if that makes any difference.
The same app behaves just fine in Chrome or IE8. All of these are on WinXP, in case that's at play.
My skills with flash are limited, so I'm at a loss as to where things would go wrong.
As these apps are also working just fine on other sites, I'm guessing this is very Myspace limited issue, but what?
thanks,
karoyI had the same problem. Called HP support and that was useless. They tried to help me restore to before the problem but the restore wouldn't work! In the end they wanted me to restoer to factory settings. All because they haven't bothered to test their update with some pretty standard software (firefox). I always get the same response from their service folks - "you are using software that is not from HP so we can't really help you". Well, yeah - uh, I occassionally do use software on my laptop that is not made by HP.
I had high hopes for moving from Dell to HP, but am just disappointed over and over again. Perhaps my expectations were too high, but never the less, I will not buy an HP laptop again. -
Cl_gui_alv_grid change the value in non editable colum
hi
i am using editable ALV. in that if user enter 10 in colum A i want to display as 100 in colum B.Need to multiply by 10
colum A is editable.
colum B is non editable.
Example
colum A colum B
10 100
20 200
30 300
Any Idea
Thankshi thanks,
i am refilling the internal table.
how to refresh the output.
thanks again -
ALV Grid fields from editable to non-editable mode
Hi,
I am displaying my data through ALV Grid. In my grid the non-key fields are in editable mode.
When I edit any of the editable fields and place the cursor on other field the field which I have edited should become disable(non-editable). Again if I want to edit the same field which is now in non-editable mode should again change to editable mode when the cursor is placed on it.
Thanks & Regards,
Adithya M.Hi Adithya,
I am confused by your statement "place the cursor on other field the field which I have edited should become disable" -- are you stating that this is the requirement or what is currently happening with your program. The way the edit fields should work by default is they are editable at all times unless you tell it otherwise.
If you are saying your requirement is to change the field to disabled once the field is edited (runtime change), first you want to handle the event on data changed then within your method of handling on data changed, you can disable the field from being edited by using cell styles and changing the value to disabled.
If you look at program BCALV_GRID_EDIT,
You will find code where it disables the field for edit using Cell Style -- this will give you an idea how Cell Style controls editable fields and display fields:
ls_cell-style = cl_gui_alv_grid=>mc_style_enabled.
ls_cell-maxlen = 4.
ls_cell-fieldname = 'CARRNAME'.
append ls_cell to gt_sflight-cell.
This specific code will set the field disabled when the program is first exectued, in your case if you need to do this at run time, after someone edits the field, you need to implement handling the event on data changed, in the same program you will find:
method handle_data_changed.
perform data_changed using er_data_changed.
endmethod.
It is within this method that you can disable a field for editing.
However, once it is disabled you will not get back into the handle_data_changed method. I'm not sure I understand your statement "Again if I want to edit the same field which is now in non-editable mode should again change to editable mode when the cursor is placed on it." Why would you want the user to be able to edit something, then show it disabled, then let them click on it and edit it again? Why not just leave it in edit mode? Maybe if I understand the requirement better, I can answer this portion of the question.
If this is based on security or changing from edit to display for the entire grid, you can run the same program mentioned above and click on the Change/Display button in the top left to see how it enables and disables the entire grid for editing.
Cheers,
Bonnie
Maybe you are looking for
-
Adobe photoshop CC 12-month prepaid membership from office max
I bought an adobe photoshop CC 12-month prepaid membership from office max. Does that just get me access to creative cloud or will it also give me a download for Adobe photoshop?
-
How do I set a link in an HTML file that points to a spot in a PDF?
I want to go from an HTML file to a spot in a PDF. By spot in a PDF, I mean a location marked by a bookmark. What is the equivalent in a PDF file to the anchor tag in HTML with a name attribute? What HTML code do I use? If I use Word to make the PDF,
-
Setting Links in Documents to Objects in KM Folders
I have a folder created in KM I need to create a link so that the contents of the folder are displayed and can be accessed on the portal. I went to KM and opened the iview from settings - properties - acess paths I copied the short ID. I found info
-
How do I restore my iTunesU files on my iPhone to my PC?
How do I restore my iTunesU files on my iPhone, to my PC without overwriting any iTunesU files already on my PC (rather than the default sync from PC to iPhone)? Thanks.
-
When printing web based .pdf or regular .pdf I get message "This document failed to print"
When printing web based .pdf or regular .pdf I get message "This document failed to print". I've ran the HP Diagonistic tool and no errors are found. I've gotten the same message on many different .pdf's so I don't believe it is a margin issue.