Adding and deleting "rows" in pdfs

I need to know the best way to edit pdfs. What I have are files that resemble a table setup in Word. I would need to add and delete "rows" of information which are also set up in columns. I also may need to edit some of the text in a row.
What is the best tool for me to use? Acrobat? Illustrator? We are currently using v.10 on Macs. Is there a fairly simple way to accomplish this?

I don't think there is a good way to do this. Except for very simple edits, it's better to edit the source document and recreate the PDF. If there is no source document available, you can try exporting to Word from Acrobat and see if you get something usable.

Similar Messages

Adding and Deleting Multiple Rows or Columns

How do you add or delete more than one row or column at a time.

Robby! wrote:
That's a great finding!
I just wrote a feedback requesting a shortcut like this.
It is a pity though that they desing it to work only if you select the header of the row/column. It should be enabled to work from within any cell in the table.
Who wrote such an error ?
These interesting shortcuts behave flawlessly even if the cursor was in D18 for instance.
(a) I never saw them in the delivered resources.
(b) they aren't responding to the OP's question which was about "Adding and Deleting Multiple Rows and Columns"
Yvan KOENIG (from FRANCE vendredi 3 octobre 2008 18:39:01)

Insert row and delete row in a table control

Hi Experts,
I am using a table control in module pool programming, How can I Insert row and delete row in a table control?
Thanks in Advance....

Santhosh,
Iam using this code..
FORM fcode_delete_row
              USING    p_tc_name           TYPE dynfnam
                       p_table_name
                       p_mark_name   .
-BEGIN OF LOCAL DATA----
DATA l_table_name       LIKE feld-name.
data: p_mark_name type c.
FIELD-SYMBOLS <tc>         TYPE cxtab_control.
FIELD-SYMBOLS <table>      TYPE STANDARD TABLE.
FIELD-SYMBOLS <wa>.
FIELD-SYMBOLS <mark_field>.
-END OF LOCAL DATA----
ASSIGN (p_tc_name) TO <tc>.
get the table, which belongs to the tc                               *
CONCATENATE p_table_name '[]' INTO l_table_name. "table body
ASSIGN (l_table_name) TO <table>.                "not headerline
delete marked lines                                                  *
DESCRIBE TABLE <table> LINES <tc>-lines.
LOOP AT <table> ASSIGNING <wa>.
access to the component 'FLAG' of the table header                 *
    ASSIGN COMPONENT p_mark_name OF STRUCTURE <wa> TO <mark_field>.
if <MARK_FIELD> = 'X'.
    PERFORM f_save_confirmation_9101.
    IF gv_answer EQ '1'.
      DELETE <table> INDEX syst-tabix.
      IF sy-subrc = 0.
        <tc>-lines = <tc>-lines - 1.
      ENDIF.
      ELSE.
      ENDIF.
    ENDIF.
ENDLOOP.
in this code   ASSIGN COMPONENT p_mark_name OF STRUCTURE <wa> TO <mark_field>.
if <MARK_FIELD> = 'X'.
this code is not working...

Outlook Calendar items added and deleted at same time

I have several repeating calendar items (like birthdays) in my Outlook calendar. When I sync, I find that some are added (that I thought were there before) but some show as added and deleted at the same time to my blackberry... any ideas what may be causing the confusion?

I find myself with the same issue, I just wiped my computer and began syncing and installing all programs back into laptop,now i have noticed that outlook does not add the some events in my calender, for instance, birthdays , one thing that i have noticed is that it only syncs items that have my work email, my other 2 emails are not being synced and those are my blackberry and personal emails.
my syncing preferences are made to go both way sync ... what seems to be the problem
thanks

List of newaly added and deleted users

I am looking for the powershell script to get the list of users which are added and deleted with in last 1 day from user profile service application. I do have SharePoint 2010
Santosh sethi

Hi Inderjeet, Thanks for the information, sorry steps metioned in above link didn't help me too much.
I know the information of number of profiles deleted and added after each sync can be viewed through
miisclient.exe , but not sure how to get the data with out open it in explorer view
Santosh sethi

On my daughters IPHONE 5 i want to know which apps she has added and deleted. Is there a log or way to track?

My daughter has an IPHONE, i want to be able to track which applications she has added and deleted. For instance, if she adds an application she shouldn't and when it comes time to verify and she doesn't have the application because she deleted it so i wouldn't see, is there a log or way to track what application have been added / deleted with dates and times?

If you go to a computer that has the itunes program on it you are then able to go to the APPs store on itunes and login in with your daughters apple id. Once logged in with her apple id you then are able to see all historical archies by simply clickon in the apple id going from there to 'accounts' from account you are able to see purchased items. Not clear exactly what the 'deleting' of apps is all about but certainlly this will allow you to track what has been downloaded to her apple id.
Good luck.

Bootcamp no longer bootable after adding and deleting partitions

I am using a 2014 Macbook Pro with OSX 10.9.5
I was trying to add a partition to install Ubuntu on and after adding and deleting partitions, my bootcamp partition will no longer boot whether I use rEFIt or bootcamp assistant or normal osx boot menu.
Judging from the information I got from similar threads on this I think this information will be useful
Last login: Thu Apr 9 12:05:32 on ttys000
abdulrahmansmbp:~ abdulrahmanLASTNAMEREDACTED$ sudo gpt -r -vv show disk0
Password:
gpt show: disk0: mediasize=251000193024; sectorsize=512; blocks=490234752
gpt show: disk0: Suspicious MBR at sector 0
gpt show: disk0: Malformed MBR at sector 0
gpt show: disk0: Pri GPT at sector 1
gpt show: disk0: Sec GPT at sector 490234751
      start       size index contents
          0          1         MBR
          1          1         Pri GPT header
          2         32         Pri GPT table
         34          6
         40     409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
     409640 285122688      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
285532328    1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
286801864    7847992
294649856 195584000      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
490233856        863
490234719         32         Sec GPT table
490234751          1         Sec GPT header
abdulrahmansmbp:~ abdulrahmanLASTNAMEREDACTED$ sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 30515/255/63 [490234752 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE    0   0   2 - 1023 254 63 [         1 - 294649855] <Unknown ID>
2: 07 1023 254 63 - 1023 254 63 [ 294649856 - 195584000] HPFS/QNX/AUX
3: 00    0   0   0 -    0   0   0 [         0 -          0] unused
*4: 07    0   0   0 -    0   0   0 [         0 -          0] HPFS/QNX/AUX
abdulrahmansmbp:~ abdulrahmanLASTNAMEREDACTED$
It wasnt like this before. Before 3 and 4 had some of the same values from above instead of all 0s. After trying to take advice from threads with similar problems and entering stuff into the command line it became like this. I think I might have messed thing up while looking for a quick fix.
Can anyone help me with this? Thanks.

I'm not sure how to edit my replies so I'm just gonna make another reply. I assumed the following values:
GPT 3 Start
GPT 3 End
GPT 3 Size
NTFS Start
NTFS Offset
NTFS End
NTFS Size
293378384
293380320
1936
294649856
1936
490233855
195584000
I followed the rest of the instructions given here. I made sure to enter the second number with a + sign. After doing all of that all these checks worked:
Test 1 - Does Bootcamp Volume show up in Finder?
Test 2 - Can you see files in Bootcamp Volume?
Test 3 - Can you select Bootcamp in System Preferences -> Startup Disk?
I've always been able to access my bootcamp files from finder and I can try to boot from System Preferences -> startup disk, from rEFIt and also from my macbooks startup manager that I access by holding down option while booting.
I'm starting to think I've misrepresented my problem and that I've been looking at the wrong threads. Every time I try to boot windows I get a black screen with the Windows logo and some text saying something like "starting automatic recovery" or something like that. It then takes me to a blue screen displaying an error number and telling me to use recovery tools on the installation media. Maybe this is different from the problems I've been looking at in other threads.
I've tried using the same USB I used to install bootcamp with but it doesn't give me the option of repairing the installation.
EDIT: So I figured out how to edit replies. Anyway I just tried to boot into Windows and checked. The black screen with the Windows logo says "Preparing Automatic Repair". The blue screen gives me the error 0xc00000e.

Adding or Deleting Rows and Columns from Tables

I have notices that you can't delete or add a row or columns from a table in iWeb without having problems.
You may get two added or deleted.
I should indicate that the table comes from Excel.
Does anyone know of a work-around?

Problem 1 - The sub-form 'Stds' was not configured for repeating rows.
Problem 2 - The script was on the wrong event. The script should be on the 'change' event and not the 'initialize' event.
Problem 3 - Which header row in which sub-form are you referring too?
Steve

Problem with creating and deleting row in table

Hi
I'm using JDev11.1.1.2.0. I have a table "A" with primary key X -> CHAR(1). I have created Entity and ViewObject (with the primary key X).
I created an editable Table with CreateInsert and Delete actions.
When I click Insert, a new record is added and I enter some data. Then I move selection to some other row, and return back to the new row. When I press Delete, It does not delete the new row, but the previous one selected.
In the console, when I navigate back two the new added record: <FacesCtrlHierBinding$FacesModel><makeCurrent> ADFv: No row found for rowKey: [oracle.jbo.Key[null ]].
I tried the same scenario with a different table, that has RowID as a primary key and it works correctly.
Any Idea why this is happening ? I suppose it's connected somehow with the primary key.
Thanks
agruev
Edited by: a.gruev on Nov 26, 2009 9:47 AM

I changed my entity: unchecked the X column to be primary key added RowID as a primary key. Now it works.
What's wrong with my CHAR(1) as a primary key ?
I also tried to add a Refresh button:
<af:commandButton text="Refresh" id="cb3"/>and in the table add a partialTarget to the button. Now when I add new row and press the Refresh button - then it works.
So it seems that the problem is when I add new row and enter data, the table is not refreshed and the row is missing it's primary key.
Any solutions?
Edited by: a.gruev on Nov 26, 2009 4:18 PM

Can I get the summary of added and deleted words in two compared documents in Acrobat Pro XI as it was in Pro 6?

I want to be able to estimate the amount of words that change from one document to another. I am using Adobe Acrobat Pro XI to compare two documents. The summary says "Differences exist between documents" and lists the amount of pages in each one. Then it goes on to the report and highlights insertions and deletions.
I would like a more informative summary. Previously, in Adobe Acrobat Pro 6.0 (I don't really know after that), the summary I got after comparing two documents contained how many words had been added and how many words had been deleted.
I have checked the configuration of the new Acrobat but I have not been able to find the same functionality. Is there something I am missing? Is this feature not supported anymore?
If so, is there a workaround? I have been looking into using JavaScript but I cannot access properties of words that the program highlights as having changed. Thank you very much for any insight you may have.

OCR is only for recoginition of the image / picture of text provided by an scanner.
Content typed into a Word file which is converted to a PDF is (in Word and in PDF) *not* an image or picture of text - it is the digital text. So, no OCR involved.
When the "digital" (renderable) text of a PDF's page content is exported to Word no OCR is involved.
When a PDF's content is from the image output of a scanner and this is a picture of text then OCR comes into play.
If this content is exported to Word before doing OCR then it is the image that is exported to the Word file.
Once OCR is performed it is the OCR output that is exported.
OCR output is (always will be) impacted by "the quality of the OCR and the scans of the documents".
Regardless "Compare" is based on a Word file output to PDF1 then edits to the Word file followed by an output to PDF2. You use Acrobat Pro to do a compare of PDF1 & PDF2.
Paper 1 scanned to image 1 to image 1 in PDF1 that gets OCR 1 and
Paper 2 scanned to image 2 to image 2 in PDF2 that gets OCR 2
being processed with Acrobat Pro's Compare can certainly be done.
But - well you've described what can be observed.
Be well...

Add row / delete row in PDF Form

Alright so I am really struggling here and no one has been able to provide me a solid answer to date.
1. I am creating a PDF form I want users to be able to fill and remit via email
2. I have created the form in Acrobat 9 Pro via the form Wizard and in some combination with MS Word 2007 for text and table fields to get the forms wizard to auto-populate Adobe form fields.
3. Some of the tables, i.e. In the first table for "Full Time" and "Part Time" should have check boxes - works fine to date. While others should have drop downs, i.e. platform build, etc - works fine to date.
4. This is the pressing issue. As they exist today there is a large table as you can clearly see. I want users to be able to simply click an "Add Row" or "Delete Row" button to add another row to the table (or delete) without having to have a massive table.
I've watched demos on Lynda.com (all of which are irrelevant and provided 0 value), tried to work with what people have responded with previously but all are mainly sample documents and I don't know where to start. In short, I open my form and other forms in LifeCycle Designer ES, take a look at the buttons people have created, the scripts, the XML source, etc. but no idea where to go. If the button needs to be in the table. How it should be scripted. etc. I cannot find a video tutorial anywhere on the web and all the responses simply provide a sample but no idea how to make it a reality in terms of translating their sample into a working dynamic form in PDF. Any help is greatly appreciated. Thanks.

For a dynamic table you have to design a new XFA-form in Designer.
Here's a little tutorial how to create dynamic tables.
http://forms.stefcameron.com/2009/02/25/expandable-table-with-totals/
Just a little correction.
You can inport Docx-Files with tables and add / remove rows in a dynamic PDF.
But, this is not handy, if the table contains more than one row when it is imported because Designer gives every detected row the same name (Row).
Delete all row excepting the first one and set it to repeatable in the binding tab.
Then you can use the addInstance() and removeInstance() methods to add/remove row to the table.
Here an example file I made from a docx file.
https://acrobat.com/#d=k8XbQWmqu6bhfrrwui93pw

Updating, Adding, or Deleting rows from a query

So, I've got this page that originally was made of four
different forms. It worked great. But, then the client asked that I
"idiot proof" the page.
Originally, I had a form that enclosed a one-line table (with
Add & Clear buttons on the end) that took seven fields and
"added" a new record to the "tbljob" table.
That was followed with another form that created a table from
the results of a cfquery and listed all the rows from tbljob (with
Update/Delete buttons on the end of each row).
This worked fine when it was two separate forms. Now, I'm
trying to use only one "form" while displaying the two tables. The
buttons are now done with Javascript (so there are dialog boxes).
The problem is that I am getting a CF error message because the
insert, update, and delete commands are trying to pass the contents
of the fields as comma-delimited lists rather than the single data
item that is actually in each field. I am passing a hidden field
with each row that contains the "job_id".
I know the problem is that I'm not identifying each row as
being unique. I guess it's like I'm passing an "array" of data
rather than just a "row".
Basically, I just want to be able to display a blank row for
adding records followed by multiple rows from a query. The blank
row needs to have "Add" and "Cancel" buttons at the end and the
multi-row part has to have "Update" and "Delete" buttons on the end
of each row and manage the appropriate records.
It's got me stumped. TIA.

What you can do is try using <cfloop> to insert, update
and delete your information.
For instance deleting the information try this.

<cfloop index="JobIDs" list="#Job_ID#" delimiters=",">
<cfquery name="delteall" datasource="dbsource">
DELETE
FROM table
Where job_Id = #JobIDs#
</cfquery>
</cfloop>
Do the same for your inserting and updating.
Because what CF see is job_id = 1,2,3,4,5,6,7,8,9
SO you are looping over a list = #job_id# and delimiter is "
, " and we are calling the index JobIDs. JobIDs are the values - 1
2 3 4 5 6 ....
I hope this helps. As for the displaying of the images, use
if then statements:
<cfif isdefined("edittable") and edittable eq '"y">
Then display the query and outputs for the editing options
<cfelseif isdefined("deletetable") and addtable eq "y">
The dispaly the query and outputs for adding options
<cfelse>
Then display the query for outputing the delete options
</cfif>
So your link will have soemthing of this sort <a
href="samepage.cfm?deletetable=y">Add Table</a>
Hope this helps,
Sevor Klu

How can I select and delete rows based on the value in one column?

I searched through the discussion board, and found a thread on deleting blank rows, but not sure how to modify it to work with my issue.
I have put together a rather complicated spreadsheet for designing control systems, it calculates parts needed based on check boxes selected in a second spreadsheet.
Since not all systems require all parts there are many rows that have a 0 quantity value, I would like to select these rows and delete them once I have gone through the design phase (checking off required features on a separate sheet).
I like the way the other thread I found will gather all the blank rows at the bottom without changing the order of the rows with data in them.
I don't understand exactly how the formula in the other thread works well enough to modify it to look for a certain column.
I hope I made myself clear enough here, to recap, I would like to sort the rows based on a zero value in one (quantity) column, move them (the zero quantity rows) to the bottom of the sheet, and then delete the rows with a zero quantity (I can delete them manually, but would like to automate the sorting part).
Thanks for any help anyone can provide here.
Danny

I apologize but, as far as I know, Numbers wasn't designed by Ian Flemming.
There is no "this column will be auto-destructing after two minutes"
You will have to use your fingers to delete it.
I wish to add a last comment :
if your boss has the bad habit to look over your shoulder, it's time to find an other one.
As I am really pig headed, it's what I did. I became my own boss so nobody looked over my shoulder.
Yvan KOENIG (VALLAURIS, France) mercredi 13 juillet 2011 20:30:25
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

How to get Inserted and Deleted Rows in ALV

I have looked at the BC_EDIT* examples but I still can't figure out how to determine which rows were Inserted and Deleted from the ALV list. Can someone please provide me the code to do this?
Thanks.
Sandy

Hi sandy,
i dont think you will have issue in inserting a row in ALV because whenever the user done some actions say for eg clicking the pushbutton at the toolbar you could insert the a new row into the ALV.for creating pushbutton you need to use the events TOOLBAR,USER_COMMAND.
deleting a row may also follow the above procedure.
Have a look at the demo program
BCALV_GRID_05
Cheers,
Abdul Hakim

Recommended practice for adding and deleting from a Collection

Are there any suggestions for updating a Collection in a OneToMany ( privateOwned ) Collection? Here is our use case:
1. Retrieve a Source object from the database
2. Remove 1 or more SourceLinks from the sourceLinks Set
3. Add 1 or more new SourceLinks to the sourceLinks Set
4. Update the Source object
The SourceLink object has isPrivateOwned(true).
Adding and Removing things from a Collection seems like a fairly common use case. Are there recommended ways of handeling the above case? I've tried doing the add/remove operation in one transaction as well as removing, then re-fetching, and then adding in separate transactions and haven't had any luck.
Here is the code an test case.
class Source
@OneToMany(mappedBy = "source",
fetch = FetchType.EAGER,
cascade = { CascadeType.ALL })
private Set<SourceLink> sourceLinks = new HashSet<SourceLink>();
class SourceLink
@ManyToOne
@JoinColumn(nullable = false)
private Source source;
//~ Unit Tests
@Test
public void testMultiUpdateSourceLink()
// typical set up.
SourceLink sourceLink = new SourceLink( "junit1", 48, "mp3" );
SourceLink sourceLink2 = new SourceLink( "junit2", 64, "mp3" );
Source mySource = new Source( "http://www.site.com", SourceType.RSS );
mySource.addSourceLink( sourceLink );
mySource.addSourceLink( sourceLink2 );
beginTransaction();
sourceDao.persist( mySource );
commitTransaction();
Long sourceId = mySource.getId();
Assert.assertEquals( 2, mySource.getSourceLinks().size() );
// fetching what we just added, then deleting something from the set
// with privateOwned this works.
beginTransaction();
Source fetched = sourceDao.find( sourceId );
fetched.deleteSourceLink( sourceLink );
sourceDao.update( fetched );
commitTransaction();
Assert.assertEquals( 1, fetched.getSourceLinks().size() );
// now fetch again, try to add a new SourceLink
// fails with an OptimisticLockException
beginTransaction();
Source updated = sourceDao.find( sourceId );
Assert.assertEquals( 1, updated.getSourceLinks().size() );
SourceLink sl = new SourceLink( "ryan", 64, "mp3" );
updated.addSourceLink( sl );
sourceDao.update( updated );
commitTransaction();
Assert.assertEquals( 2, updated.getSourceLinks().size() );
The sourceDao.update() method simply calls entityManager.merge(source). Is it required to flush the entityManager as well?

Hi,
TMG MBE doesn't have the capability to add network topolgy routes via the TMG MMC. You have to use the ROUTE ADD /P command from a privileged command prompt
regards Marc Grote aka Jens Baier - www.it-training-grote.de - www.forefront-tmg.de - www.galileocomputing.de/3276?GPP=MarcGrote

Adding and deleting "rows" in pdfs

Similar Messages

Maybe you are looking for