Adding Columns to a Page

Greetings all,
So I was looking at the layout of a page: No Tabs - Left Sidebar (fixed-width / DIV based)
And what I am looking to do is create a page where the sidebar for page 0 elements is on the left and then the rest of the body consists of 4 columns but as I look at the templates not sure how to proceed. Do I need to create my own CSS for the page as I note there is a two column layout class
What I am trying to create is a page that I can have 4 charts side by side if that makes sense.
Any pointers or links with samples or any other assistance would be appreciated.
Thanks
Wally

Check this thread
<b>problem to align region</b>

Similar Messages

Adding columns to a single documents in facing pages

I am using facing pages, and I dont need columns to all pages, but I would like to know how I can add the columns to the pages that I do need them ?

Layout > Margins and Columns...
Set up a new master, and do it there if you want to save time for multiple pages.

Importing two-column text from Pages

I've produced several successful calendars and books using the iPhoto service in the past couple of years, but one thing has me defeated.
So far, I have used Pages to create text, then style it the way I want, and finally cut and paste it into the book project. It works perfectly. So far, so good.
Now I want to do two-column text pages, instead of a full-width single-column layout, but I can't find a way to do it.
I have tried exporting the two-column set out of Pages as a pdf, then using the Import command in iPhoto, but it is greyed out in the navigation window. No go.
Any ideas?

Do a Print to PDF of the Pages layout and select the Send PDF to iPhoto option. That will create a jpg image of the page which can be added to a full page layout in the Book. Here are a couple of crude examples of that from a Word document: Portrait oriented - Landscape oriented.
Of course my example is single column but with a two column layout in Pages and in the landscape mode it would work just as well.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.
Message was edited by: Old Toad

Adding columns in the matrix

Hai ,
I am adding the columns in an existing matrix at runtime in page load.
I can able to add but how to give the header text for the columns added?
I tried with the following code,
oMatrix.Columns.Item("ItemMake").Title = "Make";
but it gives the error as,
"property or indexer 'SAPbouiCOM.IColumn.Title' cannot be assigned to -- it is read only"
and also i want the added column to be displayed in the first position.
Regards,
Kughan.

Hi,
Then i recommend u to create a UDF in the marketing document section. So that in the PO matrix u can get a new col. And for creating the UDF u can do it in SAP UI using.. Tools->Customization Tools->User defined Fields management or u can also do it in code C:\Program Files\SAP\SAP Business One SDK\Samples\COM DI\VB.NET\02.MetaDataOperations Check that sample for code.
Hope it helps,
Vasu Natari.

How to make added columns to be visible by default in interactive report?

Hi,
I've added two columns to an interactive report.
When I run the page, the added columns are not visible.
Then I made them visible through 'Select Columns' option.
But next time when I log in those two columns are again invisible.
How can I make the added columns to be visible by default in the interactive report?
Thanks,
Guy

Hi Steve,
I am ahving a similar issue.After I migrated my classic report to interative report, I have added few columns to the SQL query...I am not anle to see these in the report..I deint understand the solution u gave here..Can you please elaborate..
Where can I include the "actions" option? and how do I use the Save Action.
Can you please provide more details.
Thanks in Advance

How to print all columns in one page

Hi,
Can anybody explain me how to print all columns in one page.we have around 15 to 20 columns for 4 reports and all these reports are build on one multiprovider.we are using BW 3.5.
Can anyone explain me how to print ALL COLUMNS IN ONE PAGE .currently they are getting all columns in 2 to 3 pages. They are using PORTAL to run the reports here.
Is it possible to do by customizing Webtemplate or by macros in Workbook.Please help me
Edited by: kotha123 on Oct 11, 2010 5:58 PM

Hi,
Your best bet is to use a workbook template or else Excel to pdf option...Thanks

Stock Requirement List - MD04 - adding columns in this list

Dear All,
I am working on the Stock Requirement list ( transactioncode MD04) and the customer wants to add columns with the fields STPO-DATUV ,date of change of a drawing, and the drawing number with revision level STPO-YY_DZEINR.
There is a badi MD_ADD_COL_EZPS which provides in adding columns, but according the structures MDPSX , MDEZX and MDSUX there are no fields in thoser structures, which directly match with the required fields; somebody has a clue to help me out and get it working.
For instance: Vendor- and Customer data can be added by using the pushbuttons and those fields are available from above mentioned structures.
Thanks in advance and kindest regards,
Rene.

Hi Utpal Mishra
You guessed correctly. I missed to inform our Strategy. We are using Strategy group 11 Make-to-stock prod./gross reqmts plnning.
User is not able to do PGI or create delivery. He says I have enough stock in MMBE but why system is not allowing.
Here there are some pending document like -
1. Pending sales order
2. Pending deliveries (picking not done)
2. Delivery created & Picking Done but PGI not done. These things will have a commitment against the stock. But we are interested in getting these document numbers, so that we can take come action against them.
MD04 simply shows the mrp element as order / delivery but the document number is not available. How to find these documents.
Please help. Is there any table or a standard transaction ??
Thanks

Adding Columns to the matrix in SAP B1 user form using Visual studio 2010

Hi,
Using Visual studio 2010, I have created a SAP B1 user form( b1f ) with one matrix.Matrix is having 5 columns. Its working properly. Later, I want to add few more columns. Then I added columns to the matrix as I have created columns initially. But, it does not saves.
i.e, Whenever I run, In B1 I could see only old columns. Newly created columns are not showing.So, I closed the .net project and opened again. Created columns are not showing in visual studio b1f itself. So, I created again and saved. But, its not saving.I tried it many times.
What I am missing?
Any help is appreciated.
Thanks in advance,
Parvatha Solai.N

Hi Parvatha,
Are you using B1 Studio? Anyway try to clean the solution first then rebuild it. This would re-copy files to the output directory, that contain your changes.
Best regards,
Pedro Magueija

When adding columns, why do I get overrides on style?

Hi all,
When I'm adding columns in a certain document I end up with the new columns having overrides on them. How can I avoid this?
The columns I added are seen in the middle.
As you can see the they all get a "shift down" by -22 pt.
I use this shift down on some other place in the document, but the table columns are clean from that kind of override, and just by selecting a column and adding 4 new columns "to the right" of that column, I would expect the new ones to get the exact same properties as the one selected.
Can anyone try to explain what might be wrong with my document or way of working?
Adding info: It seems there's something in the styles - many properties on them... This has noting to do with cells specifically. Just adding a textbox results renders the text this way as well, with the baseline shift (only no override symbol).
Best regards,
Andreas

Ah... now I get it. The default styles of the document were set to a specific paragraph style and another character style.
Setting the defaults to [Basic Paragraph] and None respectively seems to put everything in order.
(You set a default by clicking outside the document so that nothing is selected, and then you select the styles [Basic paragraph] and None)
Case closed.

Discoverer 10.1.2 does not refresh new added column

Hello,
I need help to add a new item to EUL Business Area folder for a new added column in the database table.
When I refresh the folder in the BA EUL, the result shows no difference between the folder and the underlying table in the database; however, when I quey the table in the database, a new column is there. The refresh of the folder in the Discoverer Admin tool cannot find the newly added column. Weird!! The first time saw this problem.
Could someone shine some light on it? Would be really appreciate it!
Ping

I have a slightly different problem and can't solve it! When I refresh the EUL, the result shows the differences between the folder and the underlying tables in the database. However, it does not refresh the EUL in Discoverer Administrator 10g. Nothing happens! When I try to refresh again, the same list is shown... Does anyone know what could be happening?
Thanks

How to get added columns in the after DDL trigger?

As title, I want to get information, like name/type/.., about the added columns by sql statement "alter table *** add (***)" in the after ddl trigger. But looks like dba_tab_columns view doesn't include the added columns.
Thanks

Hi
Hi try other versions of the trigger like
create or replace trigger addl_trigger
after alter on schema
declare
TYPE attrs_cur IS REF CURSOR;
m_cur attrs_cur;
m_event varchar2(50);
m_user varchar2(50);
m_owner varchar2(50);
m_user1 varchar2(50);
m_type varchar2(50);
m_name varchar2(50);
m_column varchar2(50);
m_cnt NUMBER;
m_stmt varchar2(512);
number_of_modified_objects BINARY_INTEGER;
t ora_name_list_t;
begin
m_event:=ora_sysevent;
m_user:=SYS_CONTEXT('USERENV','SESSION_USER');
m_user1:=ora_login_user;
m_owner:=ora_dict_obj_owner;
m_type:=ora_dict_obj_type;
m_name:=ora_dict_obj_name;
if (m_type='TABLE' and m_event='ALTER')
then
          execute immediate 'select count(*) from dba_tab_columns where owner=:1 and table_name=:2' into m_cnt
          using m_owner,m_name;
          insert into log values (m_cnt);
          dbms_output.put_line('->'||m_cnt);
          OPEN m_cur FOR 'select c.name from sys.col$ c, sys.obj$ o, sys.user$ u where o.obj# = c.obj# and o.owner# = u.user# and u.name=:1 and o.name=:2' using m_owner,m_name;
          LOOP
                    FETCH m_cur INTO m_stmt;
                    EXIT WHEN m_cur%NOTFOUND;
                    insert into log values (m_stmt);
                    --dbms_output.put_line(m_stmt||'**************');
                    END LOOP;
end if;
but all versions continue to insert only the already existing columns. I think that Oracle actualize the dictionary first after this system event.
Bye, Aron

HELP --- Error while adding Portlets to the Page. (WWC-44012)

Hi all,
I have a pl/sql portlet. It compiles fine and shows up perfectly in portlet repository. But when i add this to the page, I get following error
Error while adding Portlets to the Page. (WWC-44012)
An unexpected error occurred: User-Defined Exception (WWC-43000)
An unexpected error occurred: User-Defined Exception (WWC-43000)
An unexpected error occurred: User-Defined Exception (WWC-51004)
(WWC-00000)
I checked the portlet specification file (.pks) and body file (.pkb) for any mistakes but they seems fine.
Does anyone know what can cause this error?
Any pointers in this regards will be highly appreciated.
Thanks!!!
Rajesh

Rajesh,
Could you provide some more details about your code? I will try to look into possible causes of the error. One thing you may try is subscribing to the Knowledge Exchange on http://portalcenter.oracle.com. Then you could post your code in your community folder and everyone would be able to test it out.
Of course, this means you must be willing to share your code with everyone.
James

SSAS Tabular - Adding Column to a table gives error "Object reference not set to instance of object"

If I make changes to a table in SSAS Tabular Visual Studio, the newly added column gives error as "Object
reference not set to instance of object"

Hi VikasJain13,
According to your description, you get the "Object reference not set to instance of object" error when adding columns in Tabular. Right?
Generally, it throws this error when the internal code is accessing the property of an empty object. As you mentioned it happens when you make changes on a table, mostly it means that table is already a empty object. Please re-process your tabular to see
if this table is still existing.
If you have any question, please feel free to ask.
Simon Hou
TechNet Community Support

Is there any way to print 6 Keynote slides in 2 columns on a page?

I am using Keynote '08 and am trying to create a pdf file with 6 slides on each page, on two columns, in portrait format. Does anybody know how to do this?

Print them as whole slides, and use a print driver that via the "Layout" pane lets you output them in two columns of three pages... Since each "page" is a slide, you'll end up with the handout you want. I've done this lots of times. It's easy.

Is there any way to print my Keynote slides in two columns on a page?

Is there any way to print my presentation slides in two columns on a page? thanks

You can do this through the Print dialog when you go to print your slides. In the dialog, click the dropdown menu that says "Copies and Pages", and choose
"Keynote". Here you can use the "Handout" settings to put multiple slides on a page. This option will leave some space beside the slides, where the notes would go.
Alternatively, in the same dropdown menu, you can choose "Layout". In the panel that appears, you can set your output to print multiple pages on a single sheet of paper, and arrange them how you like. If you are set to print slides and not handouts, this method will print multiple slides, without spaces for notes, on a single sheet.

Adding Columns to a Page

Similar Messages

Maybe you are looking for