Adding custom field to Task using EEWB

Hi there,
I need to add 2 custom fields to a Task using the EEWB.
When I look at transaction CRMD_ORDER->Create, I see that the area I need to add to is categorized as a TASK.
But, following through the EEWB wizard, when asked for the EEW Bus. Object Type, TASK is not available on the dropdown.
My question is, is a TASK categorized as a BUSINESS_ACTIVITY ?
I've done a few of these already, for BUSINESS_ACTIVITY and SERVICE_PROCESS, and these were available in the EEB search help - not TASK though.
Any help would be greatly appreciated .
Thanks.

Hi Denis,
thanks for the quick response - I did the EEWB, choosing Business Activity, and then defined it as a Task
in a later step (Task was available on the later list, so I went with that).
Thanks again,
David.

Similar Messages

  • Adding custom fields in FPM_FORM_UIBB using feeder class

    Hi,
    We have requirement to add custom fields in form uibb using feeder class in Health and safety module at incidents report.
    Please provide me some usefull documents and reference links.
    Thanks
    Murali Papana.

    Hello Murali,
    1. Copy the Feederclass to customer namespace (ZCL_HRESS_PER_DETAIL_XX)
    2. Create a new TYPE in you class; e.g. S_CUSTOM_FIELDS
    3. Add a type definition
    Example:
    private section.
    *"* private components of class ZCL_HRESS_PER_DETAIL_XX
    *"* do not include other source files here!!!
    "--- BEGIN - Enter here your type definition
      types:
        BEGIN OF S_CUSTOM_FIELDS,
          YOUR_FIELD       TYPE STRING,
        END OF S_CUSTOM_FIELDS .
    "--- END - Enter here your type definition
      constants CV_ACTION_CODE_REFRESHFVALUES type FPM_EVENT_ID value '_REFRESH_VALUES_'. "#EC NOTEXT
      constants CV_ACTION_CODE_ON_CNTR_SELECT type FPM_EVENT_ID value '_ON_COUNTRY_SELECT_'. "#EC NOTEXT
      constants CV_ACTION_CODE_SELECTCOUNTRY type FPM_EVENT_ID value '_SELECT_COUNTRY_'. "#EC NOTEXT
      constants CV_DATA_SHARING type STRING value 'DATA_SHARING_TEXT'. "#EC NOTEXT
      constants CV_COMP_BOL_ATTR type STRING value 'BOL_OBJECT_ATTR'. "#EC NOTEXT
      constants CV_DATA_SHARING_SPACE type STRING value 'DATA_SHARING_SPACE'. "#EC NOTEXT
      constants CV_ADDRESS_COUNTRY_SPACE type STRING value 'COUNTRY_SPACE'. "#EC NOTEXT
      methods GET_INFTY
        returning
          value(RV_INFTY) type INFTY .
      methods CREATE_ADDRESS_ENTITY
        exporting
          !ET_MESSAGES type FPMGB_T_MESSAGES
          value(EV_RESULT) type FPM_EVENT_RESULT .
    4. Edit method IF_FPM_GUIBB_FORM~GET_DEFINITION
    Add the following:
    DATA lt_component_tbl TYPE ABAP_COMPONENT_TAB.
    DATA LS_CUSTOM_FIELDS TYPE S_CUSTOM_FIELDS.
    DATA ls_new_component TYPE ABAP_COMPONENTDESCR.
    DATA lo_new_component TYPE REF TO CL_ABAP_typeDESCR.
    DATA lo_new_component2 TYPE REF TO CL_ABAP_STRUCTDESCR.
    FIELD-SYMBOLS <ls_new_field_descr> TYPE FPMGB_S_FORMFIELD_DESCR.
    FIELD-SYMBOLS <fs_wa_mand_field> TYPE FPMGB_S_FORMFIELD_DESCR.
    APPEND INITIAL LINE TO ET_FIELD_DESCRIPTION ASSIGNING <ls_new_field_descr>.
          <ls_new_field_descr>-NAME = 'YOUR_FIELD'. "Enter here your field
          <ls_new_field_descr>-LABEL_BY_DDIC = 'X'.
          <ls_new_field_descr>-VISIBILITY = '02'.
          <ls_new_field_descr>-DEFAULT_DISPLAY_TYPE = 'IN'.
      " Get table of all fields, visible in GUIBB
      CALL METHOD EO_FIELD_CATALOG->GET_COMPONENTS
        RECEIVING
          P_RESULT = lt_component_tbl.
      " Describe data in LS_CUSTOM_FILED
      CALL METHOD CL_ABAP_STRUCTDESCR=>DESCRIBE_BY_DATA
        EXPORTING
          P_DATA      = LS_CUSTOM_FIELDS
        RECEIVING
          P_DESCR_REF = lo_new_component.
      lo_new_component2 ?= lo_new_component.
      " Add custom fields to field catalog
      ls_new_component-name       = 'LS_CUSTOM_FIELDS'.   "type string,
      ls_new_component-type       = lo_new_component2.    "type ref to cl_abap_datadescr,
      ls_new_component-as_include = 'X'.                   "type abap_bool,
      ls_new_component-suffix     = ''.                   "type string,
      APPEND ls_new_component TO lt_component_tbl.
      TRY.
      CALL METHOD CL_ABAP_STRUCTDESCR=>CREATE
        EXPORTING
          P_COMPONENTS = lt_component_tbl
    *      P_STRICT     = TRUE
        RECEIVING
          P_RESULT     = eo_field_catalog
       CATCH CX_SY_STRUCT_CREATION .
      ENDTRY.
    5. In your GUIBB you have to replace the feeder class to your new customer feder class.
    Hope, I could help you.
    Best regards, Christian

  • Adding custom fields to Embedded Search

    Hi All,
    I have read the post [here|How to add custom fields to Embedded Search; about adding custom fields to Embedded Search. I am looking to add Employee Subgroup for use in Talent Management (specifically the STVN SuccessionPlanning component) and wanted to know if anyone can expand on the instructions in the link to add this field.
    It appears to be part of the HRTMC_PERSON search object connector already and while I've done some IMG configuration the field is showing in SuccessionPlanning, but not displaying any data.
    Additionally, I'd be interested in any tips to add information that is not from PA0002 should it be required in the future.
    Many thanks,
    Luke

    Hi Luke,
    I am assuming here that your search request fields are based on HRTCM_CENTRALPERSON search template. To enable your search to work on employee subgroup please do the following
    1) Check if the HRTMC_PERSON Template extracts the data from Infotype 0001 via SPRO node 'Define Search Models and Change Pointer' Extraction Class is 'CL_HRTMC_SEARCH_READ_PA_INFTY'.
    2) Via ESH_COCKPIT, goto Template Modeler and select your custom Software Component and press Edit. Goto roadmap step 5 - Define Requests - where all search request fields are defined. Its using these fields Talent search works.
    3) Select the search request e.g. 'SAP_TALENT_NAKISA', it would then show list searchable attributes in below table. Using 'Add' button select path for PERSK so that it can searched.
    It would look like this once selected
    OBJID(REL_CP_P)->HRTMC_REL_CP_P_209.REL_CP_P(REL_CP)->HRTMC_PERSON.OBJID->HRTMC_PERSON.ORG_ASSIGNMENT
    4) In step SPRO 'Define Search Requests and Search Field Names' , define Employee subgroup field with AliasSearchField = PERSK since thats what is defined in roadmap step 5.
    Hope it helps!
    Regards,
    Ricky Shah

  • While adding custom field in urgent change-Create new field button in AET is not coming

    Dear All,
    we have requirement to add some custom fields in urgent change document. while adding custom fields using AET, create new field button is not coming.
    Thanks in advance. points will be awarded.
    Rahul

    Hi Jignesh,
    Thanks for your valueble inputs, it really helped me to understand the process.
    I checked in Web UI configuration for urgent change document as you mentioned but still that button is not coming.
    In transaction BSP_WD_CMPWB, i have created enh. set: Z_ENHANCEMENT_SET.
    Can you tell what to selelect in application and page popup which comes after selecting Enhance component button. Actually i tried but i am not able to add new record in conf.
    Thanks in advance.

  • CRM 7.0 / IS-U: adding custom fields to Business agreement for replication

    Hello Experts!
    We're working on replication of custom fields from IS-U to CRM 7.0.
    Can you help me with clarification of my understanding of these questions..?
    1) CRM/IS-U mapping tables for buag_main:
    Business Agreement(BUAG_MAIN) is a BO in CRM that corresponds to CRM table CRMM_BUAG and to Contract account in IS-U table FKKVKP.
    Table FKKVKP were enhanced with some z-fields,
    so we are going to enhance corresponding CRM table CRMM_BUAG (or CRMM_BUAG_H) with that new fields..
    But we see that these CRM and IS-U tables have far not the same field structures..
    So, the question: Which crm and is-u tables i should look, enhance and replicate for Business agreement?
    2) Access to Business agreement with possibility to add custom field:
    I couldn't find in Web UI where i can directly edit profile of Business Agreement..
    I've found just access to assignment block "Business agreement" on Account's profile overview page..(Role ServicePRO; Account details).
    There I used AET to add custom field..but I faced with problem when the 1st popup appeared: there was no enhanced object "Business Agreement"..
    Also in role "Utilities IC Agent" i've found "business agreement" profile but there I don't see buttons for adding custom fields..
    So, the question is: Where I can access Business agreement profile to enhance it with custom fields for replication with IS-U?
    3) CRM/IS-U data exchange functions:
    I tend to use tcode CRMC_BUT_CALL_FU:
    for CRM inbound event of BUAG object  - FM CRM_BUAG_MWX_PROCESS_EXT_STRUC..(as template).
    Question: Am I right that it fits my requirement to replicate custom fields from IS-U to CRM?
    Please tell me if you need more information..
    Looking forward to your answers.
    Thank you a lot in advance!
    Kind regards,
    Evgenia

    Hi Gobi,
    Thank you for advice. But:
    I've created fields not by using AET - I used documentation that Nicolas suggested me above.
    I've enhanced tables and structures that were mentioned there with my z-fields for both sides (CRM and ERP).
    Also I looked CRMC_BUT_CALL_FU for CRM Inbound BUAG_MAIN - corresponding standard FMs are marked for call.
    Any ideas?
    Thanks in advance.
    BR,
    Evgenia

  • Adding custom fields to Article Master (MM41/MM42)

    Hi  ,
    I have a requirement of adding custom fields to Basic data of Article creation in MM41 . I appended the fields to
    MARA table using Append structure . I followed the steps given in note 44410 . But i am unable to find an EXIT/BADI
    /ENHANCEMENT to populate the values of custom fields which get triggered during MM41/MM42 .
    But the Exit EXIT_SAPLMGMU_001 gets triggered only during MM01/MM02 . Kindly guide me to solve this .
    Thanks and Regards,
    S.Sivakumar

    Hi,
    Business Requirement:
    As per the client Business critical requirements, additional fields are
    required in the Article Master. This is because the existing fields in
    the Article master are not adequate to capture the data.
    We have referred the SAP Note 925424 (Table MAW1) and 44410 (MARA) for
    this.
    Based on the above note 44410, we have added fields in MARA table,
    since Manufacturing
    activities are envisaged in future instead of proceeding with 925424.
    Whether, MAW1 (925424) also to be considered?  
    Since this is very critical requirement from client, we cannot avoid
    and do not have any
    alternate solution.
    These fields will be used in reports and pricing in sales &
    distribution.
    Apart from this, are there any other SAP notes to be referred?
    Is there any restrictions there in length for fields to be used in MARA table .
    By referring note 44410 , i added 20 fields in MARA table, in which some 4 fields are more than 40 characters .
    All custom fields are updated in MM41 and MM42 .
    Shall i proceed by this approach .Kindly guide me on this .
    Thanks and Regards,
    S.Sivakumar

  • Adding custom fields to DB table

    Hi,
    I added custom fields in std DB table using CI_* , activated table using SE14. Now I want to remove the added custom fields , I deleted the CI_* using SE11. It still appears in DB table,  I mean I dont expect to disappear from DB table, when I double click it still takes to structure screen. I deleted include from SE80 also selecting Package, activated and adjusted DB table from SE14 after deletion, but it still appears and when I check the attributes it shows the same package , how to reset the CI_* , bottom line ,I want to make DB table normal as before, because of that I am getting dumps when I execute std DB table related T codes.
    It should be done in easy way but not able to get breakthrough.
    Please let me know your suggestions.
    Thanks

    Hi Sai,
    Try to assign the CI_* structure to $temp,i.e as local object and then activate it first.
    After that, try deleting the local object and adjust the table using SE14.
    If still it does not work, ask your BASIS consultant to do an "Alter table".
    May be that works!
    Thanks & Regards,
    Anshumita.

  • Adding custom fields to table view assignment block

    Hi All,
      I want to add two news fields to 'Service Contract Item Level' in 'Object List' assignment block. How can i add these two custom fields to table view assignment block using AET. I have tried to add new fields using AET but there is no business object supports to my requirement.
    Thanks & Regards
    Nitish

    Hi Nitish,
    As naveen sadid use Cutomer_i object . I guess it will be more appropriate.
    And following link will be helpful for AET creation.
    CRM 7.0 How to --4 Adding Custom Fields With The New Application Enhancement Tool (AET)
    Regards
    Loks

  • Adding custom fields in IW41/42/43.

    Hi All,
    I have a requirement of adding custom fields in the order confiramtion screen i.e IW41/42/43.
    i found this user exit CMFU0001: Determine customer-specific screen layout.
    but i am not able to figure out a way to use it.
    has anyone done such an developemnt .
    Kindly help
    Regards,
    Johnson George.

    Hi,
    Try this:
    Userexit:CONF0001
    Go to tcode:CMOD
    Give a name for project,press Create.
    Click on the   enhancement assignments button and add the selected enhancement there and enter and save it. 
    Click on 'Components' button.Double click on EXIT_SAPLCORU_001, double click on 'INCUDE ZXCOCU01'. Write code here.

  • Adding Custom Fields to XD99

    Hey All,
        I am trying to figure out a way to Mass maintain Custom fields(Z fields) in KNA1 using transaction XD99. I did find some material which discussed about adding custom fields to MM17 transaction, but couldnt get any usefull information on XD99.
    Any inputs or suggestions are highly appreciated.

    Hi,
    Please check the following oss note
    Note 414020 - MASS: Customer fields are not mass-maintainable
    Thanks
    Naren

  • Adding custom fields to shopping cart in SRM 7.0

    Hi My dear Experts,
    I am having big doubt also a lot of confussion as per my understanding regarding adding custom fields to SC.
    I believe,
    i) It can be achieved by configuration in spro with respect to Meta data frame.
    i,e  Configure field control->configure control for fields on Header/Item level
    after that
    configure customer fields->Define cistomer fields on Header/Item level.
    ii) I also doubt fields can be added through Webdynpro enhancement of standard component.
    Pls clarify my doubt with little detail which is the best way to achieve my requirement ??
    Is Webdynpro Enhancement  really needed ??

    Hi ,
       Example for  Adding fields in SC accounting Tab ...follow the below example
    1. Add custom field ZZTESTACCT  in   structure   INCL_EEW_PD_ACC_CSF by  using  append structure.
    2. Spro ->Supplier Relationship Management u2192 SRM Server u2192 Cross application basic settings u2192 Extensions and field controls (personalization) u2192 Configure field control ->Configure Control for Fields of Substructures
    then click on  "Metadata for Fields of Substructures and Table-Like Enhancements"
    add the below entry
    Bus. Object Set Type  : 31
    Structure Field Name  : ZZTESTACCT
    Bus. Object Type       : BUS2121
    Set Level                    : Item
    Field Visible :  Check box should be checked
    Field Enable :  check box should be checked
    if you create the above entry then you can see ZZTESTACCT field in the accounting tab.
    Second point :
    WD_BADI_DOMODIFYVIEW  is a Badi you can implement this badi for the WD component and View to handle the UI elements.
    regards,
    Devi

  • Adding custom fields to FPE1/2/3 transactions

    Hi guys,
    My first thread here on SDN!
    I need to add custom fields (Document Locator Number - ZDLN, and Post Mark Date - ZPMD) from table DFKKOP to transactions FPE1/2/3 under ADDITIONAL DATA area while manually entering NEW BUSINESS PARTNER ITEM.
    The transaction is not BDT enabled and does not have a screen exit. The user exit and BaDI dont seem helpful to me.
    The screenshot below shows the user exits and BaDI for the transaction.
    Link: [Exits|http://img440.imageshack.us/img440/9319/1123201061827pm.png]
    What are my options to add fields to the transaction screen now?
    Thanks!!

    Hi,
    Yea i got the functional guys to configure it. Was a unique issue!.....But I know how they did it.
    You can add it through SPRO transaction. Go to the below mentioned path.
    Go to SAP Reference IMG
    Financial Accounting > Contract Accounts Receivable and Payable > Basic Functions > Posting and Documents > Document >
    Screen Preparartions > Include Own Fields in Detail Screens.
    Here you need to enter the details from FPE1 transaction screen.
    Activity Documentation:
    Include Own Fields in Detail Screens
    In this activity you can, if you have added customer fields to the document structures, include these customer fields in the entry screens of the transaction for posting documents.
    For the detail screens (business partner item and G/L account item) you can create a screen that contains your own fields. You must create this screen as a subscreen using the Screen Painter. In addition you have to create modules for the intialization and for data transfer (PBO and PAI).
    Activities
    If you have extended the document strutures to includes customer fields, and you need these fields in the entry screens for posting documents, you must create the screen using the Screen Painter.
    Carry out this step to create the screen and the modules that go with it in the system. You do not have to activate these afterwards.
    Further notes
    Read the field help for each field in the table. This describes the exact procedure.

  • Adding custom fields to FD32

    Hi All,
    I need to add 4 new fields to "Status" screen of FD32 transaction. I cannot use the already existing standard fields so I need to add custom fields. I have searched the forum and found the following enhancement and BADI :
    RFDRRANZ
    FI_DUZI_ROUND_CML
    I tried to implement them but did not achieve the results that I wanted.
    There are so many forums on this topic but none of them had an actual solution.
    Did any had success adding custom fields to FD32? If yes, could you please let me know the solution.
    Thank You,
    Sonali.

    Hi,
    Business Requirement:
    As per the client Business critical requirements, additional fields are
    required in the Article Master. This is because the existing fields in
    the Article master are not adequate to capture the data.
    We have referred the SAP Note 925424 (Table MAW1) and 44410 (MARA) for
    this.
    Based on the above note 44410, we have added fields in MARA table,
    since Manufacturing
    activities are envisaged in future instead of proceeding with 925424.
    Whether, MAW1 (925424) also to be considered?  
    Since this is very critical requirement from client, we cannot avoid
    and do not have any
    alternate solution.
    These fields will be used in reports and pricing in sales &
    distribution.
    Apart from this, are there any other SAP notes to be referred?
    Is there any restrictions there in length for fields to be used in MARA table .
    By referring note 44410 , i added 20 fields in MARA table, in which some 4 fields are more than 40 characters .
    All custom fields are updated in MM41 and MM42 .
    Shall i proceed by this approach .Kindly guide me on this .
    Thanks and Regards,
    S.Sivakumar

  • Adding Custom Fields to BSEG and BKPF Tables

    Hi All,
    My customer would like to add around 5 fields to BKPF table and 6-7 fields to BSEG table. Can you all suggest me whether it would be a good idea to add any custom field to these tables ? I would like to mention that standard fields available in these tables will not be used for the requirements of the customer and he is insisting on adding custom fields. I need your expert advice on this matter.
    Regards,
    Rohit

    Hi Friend,
    Please do not add any custom fields in those tables.
    These two tables are pillar of accounting entries in SAP, if you want to push them then it is OK, otherwise find some other way.
    Regards
    Krishnendu

  • Adding Custom fields to SRM 5.0 & placing them in the portal (SC)

    Hi,
    I am having some trouble with adding custom fields to the SRM 5.0 portal Shopping Cart.
    I know that in order to have the custom fields appear, you first need to add them to the INCL_EEW_PD_ITEM_CSF & INCL_EEW_PD_ITEM_CSF_SC tables.
    However, how do you control where the fields appear in the SC portal? I know that BADI bbp_cuf_badi_2 exists, but it doesn't allow you to place the fields where you want them to appear. Can you use screen variants for custom fields?
    Please help.
    Thanks You.

    Bump!

Maybe you are looking for