Can anyone confirm the date used for pushing the data into AR interface table? Is it abse don Actual ship date or scheduled ship date?

Can anyone confirm the date used for pushing the data into AR interface table? Is it abse don Actual ship date or scheduled ship date? We are facing a scenario where trx date is lower than the actual ship to which logically sounds incorrect.
Appreciate any quick response around this.

Hi,
Transaction date will be your autoinvoice master program submission level date (If you haven't setup any logic.
Please check the program level default date, if user enter old date ststem will pick the same.
Customer is trying to set the value of the profile OM:Set receivables transaction date as current date for non-shippable lines at the responsiblity level. System does not set the transaction date to current date in ra_interface_lines_all.
CAUSE
Customer has used the functionality in R11i. But after the upgrade to R12, the system functions differently than R11i.
SOLUTION
1.Ensure that there are no scheduled workflow background process run.
2.Set the profile "OM: Set Receivables Transaction Date as Current Date for Non-Shippable Lines" at Responsibility level only as Yes.
3.Now switch the responsibility to which the profile is set.
4.Create order for Non-Shippable Lines and progress it to invoicing.
5.Ensure that the 'workflow background process' concurrent program is run in the same responsibility and this line is considered in it.
6.Now check if the 'SHIP_DATE_ACTUAL' is populated to ra_interface_lines_all

Similar Messages

Can anyone confirm that IMovie 08 is missing the Video FX features?

I cannot find the Video FX features like "Aged Film", "Black and White", "Fog" etc. in IMovie 08. Have they excluded these features? If not, where can I find them? Thanks.

iM08, vers7.1 does not include any videoFX..
download for free iMHD6 or purchase (199$) FCE4 ...

Hi Just been into the apple store and the assistant told me about Pages / Keynote and Numbers for mac that can be downloaded for free. When I've searched on the app store there is only a paid version! can anyone confirm that there is a free version?

Hi Just been into the apple store and the assistant told me about Pages / Keynote and Numbers for mac that can be downloaded for free. When I've searched on the app store there is only a paid version! can anyone confirm that there is a free version?

See Apple Up-To-Date Program
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=429&mforum=iworktips ntrick
Make sure your Mac is set to English before you go to the App Store.
Be warned however thast Pages 5, with a few exceptions is actually a downgrade with over 90+ features removed:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&mforum=iworktipsn trick
Peter

I don't know of there is anyone than can fix this age old Apple problem. Does anyone know how to retrieve things under an old Apple ID when the email used for that account no longer exists? I am trying to update a number of apps that was bought under an

I don't know of there is anyone than can fix this age old Apple problem. Does anyone know how to retrieve apps under an old Apple ID when the email used for that account no longer exists & I can't remember the password? After speaking with Apple Acct. Security, I got the security Q right but my birthday was wrong! They wanted the serial number from my phone that was 3 iPhones ago! Seriously??!!
Any updated way to work around this? No Apple people can correct it.
Thanks,
Joe

You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(122986)

I have the key for office home and business, can anyone advise how to use it to install office on mac

I have the key for office home and business, can anyone advise how to use it to install office on mac

Install the software. The first time you use it you will be prompted to enter your key.

It seems that the new version of iPhoto will no longer share photos between computers on the same network. Can anyone confirm this?

It seems that the new version of iPhoto will no longer share photos between computers on the same network. Can anyone confirm this?

lovinmymac wrote:
I have "automatically create previews" in the preferences UNCHECKED. Why is Aperture creating previews? For the screen image?
You might also need to turn Preview generation off for any existing Projects. Select the Project in the Projects pane and use the cog button at the top of the pane to uncheck 'Maintain Previews For Project'.
Ian

Can anyone give me some documents for data cluster

Hi,
can anyone give me some documents for data cluster?
ths!
regards!

Hi ,
The following is a documentation on the Data Cluster:
Data clusters are specific to ABAP. Although it is possible to read a cluster database using SQL statements, only ABAP can interpret the structure of the data cluster.
You can store data clusters in special databases in the ABAP Dictionary. These are called ABAP cluster databases, and have a prescribed structure:
Cluster Databases ( I have explained the cluster databse below )
This method allows you to store complex data objects with deep structures in a single step, without having to adjust them to conform to the flat structure of a relational database. Your data objects are then available systemwide to every user. To read these objects from the database successfully, you must know their data types.
You can use cluster databases to store the results of analyses of data from the relational database. For example, if you want to create a list of your customers with the highest revenue, or an address list from the personnel data of all of your branches, you can write ABAP programs to generate the list and store it as a data cluster. To update the data cluster, you can schedule the program to run periodically as a background job. You can then write other programs that read from the data cluster and work with the results. This method can considerable reduce the response time of your system, since it means that you do not have to access the distributed data in the relational database tables each time you want to look at your list.
Cluster Database :
 Cluster databases are special relational databases in the ABAP Dictionary that you can use to store data clusters. Their line structure is divided into a standard section, containing several fields, and one large field for the data cluster.
Creating a Directory of a Data Cluster
To create a directory of a data cluster from an ABAP cluster database, use the following statement:
Syntax
IMPORT DIRECTORY INTO <dirtab>
 FROM DATABASE <dbtab>(<ar>)
 [CLIENT <cli>] ID <key>.
This creates a directory of the data objects belonging to a data cluster in the database <dbtab> in the internal table <dirtab>. You must declare <dbtab> using a TABLES statement.
To save a data cluster in a database, use the EXPORT TO DATABASE statement .
For <ar>, enter the two-character area ID for the cluster in the database. The name <key> identifies the data in the database. Its maximum length depends on the length of the name field in <dbtab>. The CLIENT <cli> option allows you to disable the automatic client handling of a client-specific cluster database, and specify the client yourself. The addition must always come directly after the name of the database.
The IMPORT statement also reads the contents of the user fields from the database table.
If the system is able to create a directory, SY-SUBRC is set to 0, otherwise to 4.
The internal table <dirtab> must have the ABAP Dictionary structure CDIR.
******** Sample Program illustrating the data cluster .
PROGRAM Zdata_cluster.
TABLES INDX.
******to save data objects in cluster databases
DATA: BEGIN OF ITAB OCCURS 100,
 COL1 TYPE I,
 COL2 TYPE I,
 END OF ITAB.
DO 3000 TIMES.
ITAB-COL1 = SY-INDEX.
ITAB-COL2 = SY-INDEX ** 2.
APPEND ITAB.
ENDDO.
INDX-AEDAT = SY-DATUM.
INDX-USERA = SY-UNAME.
INDX-PGMID = SY-REPID.
EXPORT ITAB TO DATABASE INDX(HK) ID 'Table'.
WRITE: ' SRTF2',
 AT 20 'AEDAT',
 AT 35 'USERA',
 AT 50 'PGMID'.
ULINE.
SELECT * FROM INDX WHERE RELID = 'HK'
 AND SRTFD = 'Table'.
WRITE: / INDX-SRTF2 UNDER 'SRTF2',
 INDX-AEDAT UNDER 'AEDAT',
 INDX-USERA UNDER 'USERA',
 INDX-PGMID UNDER 'PGMID'.
ENDSELECT.
****To create a directory of a data cluster from an ABAP ****cluster database
DATA DIRTAB LIKE CDIR OCCURS 10 WITH HEADER LINE.
IMPORT DIRECTORY INTO DIRTAB FROM DATABASE
 INDX(HK) ID 'Table'.
IF SY-SUBRC = 0.
WRITE: / 'AEDAT:', INDX-AEDAT,
 / 'USERA:', INDX-USERA,
 / 'PGMID:', INDX-PGMID.
WRITE / 'Directory:'.
LOOP AT DIRTAB.
 WRITE: / DIRTAB-NAME, DIRTAB-OTYPE, DIRTAB-FTYPE,
 DIRTAB-TFILL, DIRTAB-FLENG.
ENDLOOP.
ELSE.
WRITE 'Not found'.
ENDIF.
*******run this program and see the result.
Hope this documentation will give you an idea of data cluster.
if useful, do reward with the points.
Regards,
Kunal.

Can anyone confirm if you can in fact shoot/edit (perhaps using a less than best video setting) on a Canon XA20 or Sony HXR-NX30U with iMovie 10 (Mavericks)? I do not want to convert files. Thx.

Can anyone confirm if you can in fact shoot/edit (perhaps using a less than best video setting) on a Canon XA20 or Sony HXR-NX30U with iMovie 10 (Mavericks)? I do not want to convert files. Thx.

Hi road.north,
Welcome to the Support Communities!
The article below will help you determine which cameras are supported for iMovie '10
Apple - iLife Help - iMovie Supported Cameras
http://help.apple.com/imovie/10/cameras/en/index.html?lang=en_US
Cheers,
- Judy

System Image Restore Fails "No disk that can be used for recovering the system disk can be found"

Greetings
                                    - Our critical server image backup Fails on one
server -
Two 2008 R2 servers. Both do a nightly "Windows Server Backup" of Bare Metal Recovery, System State, C:, System Reserved partition, to another storage hard drive on the same machine as the source. Active Directory is on the C: The much larger D: data
partition on each source hard drive is not included.
Test recovery by disconnecting 500G System drive, booting from 2008R2 Install DVD, recovering to a new 500G SATA hard drive.
Server A good.
Server B fails. It finds the backed-up image, & then we can select the date we want. As soon as the image restore is beginning and the timeline appears, it bombs with "The system image restore failed. No disk that can be used for recovering the system
disk can be found." There is a wordy Details message but none of it seems relevant (we are not using USB etc).
At some point after this, in one (or two?) of the scenarios below, (I forget exactly where) we also got :
"The system image restore failed. (0x80042403)"
The destination drive is Not "Excluded".
Used   diskpart clean   to remove volumes from destination drive. Recovery still errored.
Tried a second restore-to drive, same make/model Seagate ST3500418AS, fails.
Tried the earliest dated B image rather than the most recent, fail.
The Server B backups show as "Success" each night.
Copied image from B to the same storage drive on A where the A backup image is kept, and used the A hardware to attempt restore. Now only the latest backup date is available (as would occur normally if we had originally saved the backup to a network location).
Restore still fails.         It looks like its to do with the image rather than with the hardware.
Tried unticking "automatically check and update disk error info", still fail.
Server A SRP 100MB C: 50.6GB on Seagate ST3500418AS 465.76GB Microsoft driver 6.1.7600.16385   write cache off
Server B SRP 100MB C: 102GB on Seagate ST3500418AS 465.76GB Microsoft driver 6.1.7600.16385   write cache off
Restore-to hard drive is also Seagate ST3500418AS.
http://social.answers.microsoft.com/Forums/en-US/w7repair/thread/e855ee43-186d-4200-a032-23d214d3d524      Some people report success after diskpart clean, but not us.
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/31595afd-396f-4084-b5fc-f80b6f40dbeb
"If your destination disk has a lower capacity than the source disk, you need to go into the disk manager and shrink each partition on the source disk before restoring." Doesnt apply here.
http://benchmarkreviews.com/index.php?option=com_content&task=view&id=439&Itemid=38&limit=1&limitstart=4
for 0x80042403 says "The solution is really quite simple: the destination drive is of a lower capacity than the image's source drive." I cant see that here.
Thank you so much.

Hello,
1. While recovering the OS to the new Hard disk, please don't keep the original boot disk attached to the System. There is a Disk signature for each hard disk. The signature will collide if the original boot disk signature is assigned to the new disk.
You may attach the older disk after recovering the OS. If you want to recover data to the older disk then they should be attached as they were during backup.
2. Make sure that the new boot disk is attached as the First Boot disk in hardware (IDE/SATA port 0/master) and is the first disk in boot order priority.
3. In Windows Recovery Env (WinRE) check the Boot disk using: Cmd prompt -> Diskpart.exe -> Select Disk = System. This will show the disk where OS restore will be attempted. If the disk is different than the intended 2 TB disk then swap the disks in
correct order in the hardware.
4. Please make sure that the OS is always recovered to the System disk. (Due to an issue: BMR might recover the OS to some other disk if System disk is small in size. Here the OS won't boot. If you belive this is the case, then you should attach the
bigger sized disk as System disk and/or exclude other disks from recovery). Disk exclusion is provided in System Image Restore/Complete PC Restore UI/cmdline.
5. Make sure that Number and Size of disks during restore match the backup config. Apart from boot volumes, some other volumes are also considered critical if there are services/roles installed on them. These disks will be marked critical for recovery and
should be present with minimum size requirement.
6. Some other requirements are discussed in following newsgroup threads:
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/871a0216-fbaf-4a0c-83aa-1e02ae90dbe4
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/9a082b90-bd7c-46f8-9eb3-9581f9d5efdd
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/11d8c552-a841-49ac-ab2e-445e6f95e704
Regards,
Vikas Ranjan [MSFT]
------- This information is provided as-is without any warranties, implicit or explicit.-------

Can you change the units used for size and position in layout editor?

Hello,
In Aperture 3.4, does anyone know if you can change the units used for size and position in layout editor? The page is set in inches, but the image size and position are given in centimetres and I would prefer to work all in inches to create custom layouts. I can't see any way to change this. If anyone knows how it would be much appreciated. Thanks!

Aperture uses the unit settings defined in the System Preferences. Set the "Measurement Units" in the "Region" tab of the "Language & Text" preferences to "US"; the Aperture will display the Size & Position in inches, if it is the "Book" layout manager you are asking about.
Merry Christmas!
Léonie

What is the method used for upload of data

Hi All,
What is the method used for upload of Data from excel spread sheets to SAP HR.
it is Bulk Data from many countries.LSMW or BDC Session Method?
what are country specific infotypes used for PA and OM.
can u plz give the list of country specific infotypes used for PA n OM Module.
Thanks
Archana

Hi Archana,
To Upload bulk data I think BDC is the best and effecient way.
Regarding Infotypes we dont have any country specific Infotypes in OM & PA. In Payroll we do have according to country wise.
I hope you had understood the point
Regards
Pavani
Remainder: Points to be given on answers

I cannot afford an iMac, can anyone recommend a widescreen Monitor for my 15" MacBook Pro. It would be used mainly for iPhoto and Aperture.

I cannot afford an iMac, can anyone recommend a widescreen Monitor for my 15" MacBook Pro. It will be used mainly for iPhoto and Aperture. TF

Pair a wireless KB with the laptop and all should be well when you attach the laptop to the iMac and invoke TDM. But as Denny mentions, it does seem like the waste of a good iMac to use it in just this configuration. Why is the laptop primary?

My requirement is to update 3 valuesets daily based on data coming to my staging table. What is the API used for this and how to map any API to our staging table? I am totally new to oracle and apps. Please help. Thanks!

My requirement is to update 3 valuesets daily based on data coming to my staging table. What is the API used for this and how to map any API to our staging table? I am totally new to oracle and apps. Please help. Thanks!

Hi,
You could use FND_FLEX_LOADER_APIS.UP_VALUE_SET_VALUE to upload them from staging table (I suppose you mean value set values...).
You can find a sample scripts if you google around.
What do you mean "how to map any API to our staging table" ?
You should do at least the following mapping (which column(s) in the staging table will provide these information):
- the 3 value sets name which you're going to update/upload (I suppose these are existing value sets or which have been already created)
- the value set values and description
Try to start with something and if there is any issues the community could then help... but for the time being with the description of the problem you have provided, that's the best I can do...

Can anyone confirm a diagnosis for my Macbook air screen please?....

Can anyone confirm a diagnosis for my Macbook air screen please?....
Started about 12 months ago randomly, the screen will just turn bright colours & is unreadable, the only way to remove it is to shut down & restart from on/off button....
Any help advice or solution would be appreciated..... Many thanks

Bring the picture with you when you take it in. The MBA may not cooperate in front of the technician.
Ciao.

Is there a linear equations VI thatI can use for inputting the coefficients with variables attached to them? Thank you.

Is there a linear equation VI that I can use for inputting the coefficients with variables attached to them? I am currently studying elec engineering and am in the thick of transient analysis. It is very time consuming figuring the mesh and nodal analysis in the transform domain. With 3 branches in a mesh analysis the resistors, inductors and capacitors are represented with variable s in them. I need to determine in the transform domain then convert to the time domain. One equation goes like this: (3+2s+1/4s)i1s - (2s)i2s - (1/4s)i3s = 6/s -6. The other equations are similar. I must keep the variable s in the equation and solve it with s in the result. I made several VIs for determining simultaneous linear equations some for complex numbers and they work great. This one has me a little stumped. I thinking that maybe Labview doesn't have a VI for this. The other VIs were fine because you just plugged in the numbers and ran the VI and got your result. Any VIs that do LaPlace transform operations?
Thank you.
Tom

Hello Tom,
You can find a VI for doing Laplace transforms in Functions->Analyze->Signal Processing->Frequency Domain (this VI is only available in the Full and Professional versions).
You may also find the following tutorial of help in working with linear systems in LabVIEW.
Linear Systems in LabVIEW
Keep up to date on the latest PXI news at twitter.com/pxi

Can anyone confirm the date used for pushing the data into AR interface table? Is it abse don Actual ship date or scheduled ship date?

Similar Messages

Maybe you are looking for