Adding EXIF Fields to Aperture - possible?

Hello all,
I would like to add to the EXIF fields that aperture displays. I know that you edit the Metadata views, and check the various Metadate Fields on and off, but I would like to add Metadata that my camera records in EXIF that aren't listed. Is that possible?
As an example, one of the EXIF fields that I see when looking at the RAW picture using exiftool is "Drive Mode" (with a value of "Continuous Shooting" in this particular image). However, I don't see a selectable "Drive Mode" field in the Metadata Fields list, so is it possible to edit the EXIF fields that Aperture displays somewhere?
Thanks,
Brian

To see, which of the EXIF fields of your images Aperture recognizes, try a simple Apple Script:
Launch AppleScript Editor and paste this in:
tell application "Aperture"
          set imageSel to (get selection)
          repeat with i from 1 to count of imageSel
                    tell item i of imageSel
                              get name of every EXIF tag
                    end tell
          end repeat
end tell
Then select an image in Aperture and press the "Run" button in AppleScript's toolbar.
This script will simply list all names of the EXIF tags, that are available to be used in AppleScript messages to Aperture.
For example for my Canon Photos I see this list:
{"ApertureValue", "CameraSerialNumber", "CaptureDayOfWeek", "CaptureHourOfDay", "CaptureMinuteOfHour", "CaptureMonthOfYear", "CaptureSecondOfMinute", "CaptureYear", "ColorModel", "ColorSpace", "Copyright", "Depth", "ExifVersion", "ExposureBiasValue", "ExposureMode", "ExposureProgram", "Firmware", "Flash", "FlashExposureComp", "FlashPixVersion", "FocalLength", "FocusMode", "ISOSpeedRating", "ImageDate", "LensMaxMM", "LensMinMM", "LensModel", "Make", "MaxApertureValue", "MeteringMode", "Model", "PixelHeight", "PixelWidth", "ProfileName", "SceneCaptureType", "ShutterSpeed", "WhiteBalance", "WhiteBalanceIndex"}
To use all tags that exiftool sees, you can embed calls to exiftool into an AppleScript and write them to a Custom Metadata field.
Regards
Léonie

Similar Messages

Adding custom fields to standard Asset Accounting ALV reports

Hello,
I have recently added some fields to the Asset Master table ANLU using the customizing include CI_ANLU. I have also added some fields using an append structure to ANLZ. I now need to have these fields available in the standard reports for Asset Accounting. One example is the report generated for transaction S_ALR_87011963. I need the new fields available in the 'Displayed Columns' list when clicking the Change Layout icon. Any suggestions?
Thanks,
JR

Hi Vignesh,
Adding new fields is not possible, but custom subscreens can be added.
Check enhancements QQMA0001 (subscreen for notification header) and QQMA0008 (subscreen for additional data).
It might help you.
Thanks & Regards,
Swati

Adding custom fields to standard table control in IW51

Hi,
I have added 4 custom fields to the standard table QMEL through the structure CI_QMEL .
In transaction IW51 there is a table control as show in the screenshot below.
The 4 custom fields which i have added in the standard table should also be added to this table control.
Can this achieved by making adjustments in SPRO settings or can it be acheived technically by using some exit?
Thanks in advance.
Regards,
Vignesh Sunkasi.K

Hi Vignesh,
Adding new fields is not possible, but custom subscreens can be added.
Check enhancements QQMA0001 (subscreen for notification header) and QQMA0008 (subscreen for additional data).
It might help you.
Thanks & Regards,
Swati

Possibility of adding new fields to migo transaction

Is there a possiblity of adding new fields in migo transaction so that we can enter the base price of items in po.
Also Can we send mail to relevant authorization if there is difference in price entered in the po and the value entered in GR

Hi, You can use BADI 'MB_MIGO_BADI' for adding custom fields at item as well as header level .
or Check SAP Note 339448 - MIGO: settings of table control
2-You can not do any thing related to price in MIGO, since you cannot enter any manual values in MIGO, it will always pull from PO or MIRO (in case of Imports).

How do I get "Measured EV" EXIF field shown/filtered in Aperture?

I have 80000 photos in my Aperture library, from a host of different digicams, but mostly from Canon Powershot G's. I'd like to be able to select from the library all photos within a particular range of Exposure Value (shutter speed, aperture, and ISO which yields the equivalent exposure - NOT the EV bias). Using EXIFTool, I have confirmed that a great many of my photos have the "Measured EV" field populated with the correct value given the shutter/aperture also in the EXIF. Aperture allows me to show the "Measured EV" metadata field in various tooltips or Viewer custom configs. However, when I filter my entire library for a non-empty "Measured EV" EXIF field, I get exactly zero results. So, why does Aperture apparent ignore/miss this EXIF field, even though it purports that it reads it???

Thanks @ComputerWhiz - and apologies for the delay in responding.
I disabled Googlebar Lite, and then checked Show All History. I found that things were unchanged: I could search for an item and it would appear, but if I select all items from "this month", those items with a blank name field still didn't show up.
Even if creating an entry with a blank name is not "good practice", I'd argue that Show All History should do just that in all cases, not just when a search term thows up a match.
I'm relieved that it's not Googlebar Lite interferring with the History display, though. Its word seach buttons (that disappeared when Google Toolbar for Firefox was withdrawn) are an essential part of using search, IMO...

Missing IPTC Fields In Aperture 2

Okay, I am switching from Lightroom to Aperture 2 after using Lightroom for roughly one year. Let me back up... I am trying to switch. Right off the bat, I am running into a problem that really has me perplexed... why on earth did Apple leave out certain IPTC fields, but leave in fields that are completely (at least in my humble opinion) useless to photography. Which fields? These are left out:
- CCI City *
- CCI Country *
- CCI Address *
- CCI Postal Code *
- CCI State/Province *
- CCI Email *
- CCI Phone *
- CCI URL *
- ISO Country Code *
- Intellectual Genre
- Location *
- Rights Usage Terms *
- IPTC Subject Code
- IPTC Scene
Most of these, marked with an asterisk, are crucial to me, and are necessary when sending images to certain clients of mine. In the meantime, Apple, for some bizarre reason, chose to include the following, useless fields:
- Action Advised
- Audio Duration
- Audio Outcue
- Audio Sampling Rate
- Audio Sampling Re... (can't read this one because Aperture refuses to show me the whole field name no matter how wide I make the metadata panel)
- Audio Type
This makes absolutely no sense to me, and I see no convenient way to get around this. This is compounded by the fact that IPTC seems to be transitioning to Core (XMP) standards, which means the field names are changed. Aperture is on version 2, and yet the IPTC support is this behind the times?
I hope someone has some good news to help rectify this.

ifarlow wrote:
I just fired up Aperture 2 after reading your Post, and I see this for one of my images:
Lens Model: EF24-70mm f/2.8L USM
It is under EXIF - Expanded under the Metadata tab. Do you not see this?
No, I didn't at first. First off - it does not show up at all in images I imported under 1.x and have not migrated to 2.0 version of RAW processing. Then - I see additional data under EXIF with new imports under Aperture 2.0 and images with updated RAW processors - but still not lens model. However, I then edited EXIF and found lens model. I simply added that field to my EXIF metadata, and now I can see (and search on) lens model for all of my images!
Thanks for pointing that out - no telling how long it would have been before I found it. Its a shame this isn't a question I posted, or I would give the "solved" points.
Now, if we can just find your metadata fields...
Scott

Adding new field to Customer master sales data area sales tab

Hello everyone,
I am new to module pool so seeking some help from experts here.
I have a requirement were in I have to add a new field to the customer master (VB02) sales area data sales tab.
I found that there is no screen exit.Is there any other way of doing it?
could you please provide me with a step by step procedure of doing it.
With Regards,
Karishma.

Hi,
How did you look for screen exit? Have you also tried it in BADI? 'Coz normally, adding custom fields to a standard screen has to be implemented in exits.
I haven't worked with VB* screens yet so I can not give you a some possible exits. But you can do some debugging. I think there's an available code in the net that searches for exits/screen exit (ask Mr.Google). You can also ask him how to search BADI in debugging mode. I remember it's TCode SE24 then look for cl_exithandler class, get_instance method. Then look for exit_name variable.
Hope this helps.

Adding existing field to a UI Search and Modifying UI Query

Hello.
I want to add the "central archiving flag" to the Contact search BP_CONT_SEARCH/Search. I've added the field into the SEARCH node via BSP_WD wizard but the field created does not appear as available in the Search because it is not into the context structure. ¿Is there any solution to this? ¿I must append a new field to the standard structure?
Although I get the "archiving flag" available I think I will need to modify the selection query ¿Is that possible? If it's possible ¿How can I do it?
I have another problem with a result field of another search for activities (BT126S_APPT/ApptSR). I would like to know how can I reach the selection ( based on BOL result model BTQRAct ) and how can I modify that selection/quety.
Thanks in advance.
Kind regards.

You can create a copy of the standard design layer, add your field and define it as dropdown listbox 0 coding is required
Otherwise you will need to code in the GET_V method and the GET_P, there's a lot of information about this if you have a little of patience to search
If fits your requirement (dropdown listbox) I would go for the design layer approach, of course there's info about this through scn too

CRM 7.0 / IS-U: adding custom fields to Business agreement for replication

Hello Experts!
We're working on replication of custom fields from IS-U to CRM 7.0.
Can you help me with clarification of my understanding of these questions..?
1) CRM/IS-U mapping tables for buag_main:
Business Agreement(BUAG_MAIN) is a BO in CRM that corresponds to CRM table CRMM_BUAG and to Contract account in IS-U table FKKVKP.
Table FKKVKP were enhanced with some z-fields,
so we are going to enhance corresponding CRM table CRMM_BUAG (or CRMM_BUAG_H) with that new fields..
But we see that these CRM and IS-U tables have far not the same field structures..
So, the question: Which crm and is-u tables i should look, enhance and replicate for Business agreement?
2) Access to Business agreement with possibility to add custom field:
I couldn't find in Web UI where i can directly edit profile of Business Agreement..
I've found just access to assignment block "Business agreement" on Account's profile overview page..(Role ServicePRO; Account details).
There I used AET to add custom field..but I faced with problem when the 1st popup appeared: there was no enhanced object "Business Agreement"..
Also in role "Utilities IC Agent" i've found "business agreement" profile but there I don't see buttons for adding custom fields..
So, the question is: Where I can access Business agreement profile to enhance it with custom fields for replication with IS-U?
3) CRM/IS-U data exchange functions:
I tend to use tcode CRMC_BUT_CALL_FU:
for CRM inbound event of BUAG object - FM CRM_BUAG_MWX_PROCESS_EXT_STRUC..(as template).
Question: Am I right that it fits my requirement to replicate custom fields from IS-U to CRM?
Please tell me if you need more information..
Looking forward to your answers.
Thank you a lot in advance!
Kind regards,
Evgenia

Hi Gobi,
Thank you for advice. But:
I've created fields not by using AET - I used documentation that Nicolas suggested me above.
I've enhanced tables and structures that were mentioned there with my z-fields for both sides (CRM and ERP).
Also I looked CRMC_BUT_CALL_FU for CRM Inbound BUAG_MAIN - corresponding standard FMs are marked for call.
Any ideas?
Thanks in advance.
BR,
Evgenia

Adding new fields in Item details screen in VA01 tcode

Hi all,
My requirement is to add custom fields in 'Additional Data B' tab of VA01 transaction.
That is, after entering the material and quantity, if i double click tat material, it goes to item details screen. In taht, 'Additional data B' tab is there with no fields.
Now i want to add fields in that.. Is it possible?
Is there any exit for adding custom fields under that tab?
Pls tell me the procedure..
Regards,
Shanthi

The process for Additional Data B, whether header or item level, is simple...
First, add the data elements to VBAK (header) or VBAP (item), in a customizing append. The accepted practice is to name your fields beginning ZZ, with the appropriate or custom data element/domain.
Then on Additional Data B screens, already named in this thread, create whatever is needed. For instance, you might want to add a subscreen that contains a group of fields with the DDIC-specific captions.
If you simply need a field, you can place the field (like VBAK-ZZMYFIELD). SAP will then manage updates to the database for you....no need to do anything to see that the data gets copied into the tables.
In one instance, I saw a pushbutton added that resulted in calls to screens with table controls, etc., essentially an entire subsystem called by pressing that button....

Adding New Field Under Sales Tax/Service Tax Tab in XD01

Hi Experts,
I want to Add new Field in CIN Details under Sales Tax/Service Tax Tab.
Is it Possible to Add Field under Standard Tab.
Thanks & Regards,
Sandip Kokate

hello,
yes there are two ways:
1) change standard screen. (that's the bad one).
2) Use GuiXt tool which provides you with a possibility to add your custom objects into standard screens, change layout, visibility and so on.
http://www.****************/Tutorials/Others/GUIXT/Page1.htm
http://www.synactive.com/tutor_e/tutor.html
i had personally used this third party tool without license ( you will be able to use only basic commands. adding input fields is one of them). I think it is the best way to enhance old transactions which don't have appropriate BADi's, user exits and so on.
br,
dez_

Adding new fields in the layout.

Hi gurus,
I have a requirement in which i need to change the layout of a report v.25 through transaction VOKF. Actually i have added one field VDATU in the table VBMTV and the fields of this table are getting displayed in the output but not all fields. so through the transaction VOKF a variant has been created with some fields and there is also option for additional fields addition. But the field which I have added new through append structure doesnt appear in the possible value fields.
So do anyone have any solution for this or if anyone has ever encountered this type of issue.
Thanks in advance.

I have added the field VDATU in the Structure VBMTV and the structure is active. This field is getting filled in the my Standard report and and is displayed only when change the layout after displaying the output.My requirement i need this field by default in the output.
Thanks in advance.

Adding Network field in Me21n

Hi All
We need to add a network field (EKKN-NPLNR) in the Me21n dynamic selection.
Goto Me21n-->documet overview on --> purchase orders --> (Will show a selection screen)click the dynamic section button .It ll show list of fields .Is it possible to add the network field in that.
Basically a query has been written using logical database MEPOLDB.If i go into that logical database it is showing network field for selection.But when i go thro' Me21 it is not showing .
Is there anyway to get this field.
Thanks in Advance
Raj.

Hi,
     Another way of doing the same is to use screen-exits for the transaction. You can use the standard enhancement MM06E005 in SMOD for the Purchasing related custom fields. You can add the fields in the screens 0101, 0111 of program SAPLXM06 to get the fields in the tab 'Customer Data' at header level and item level for ME* transactions.
EXIT_SAPMM06E_006
EXIT_SAPMM06E_007
EXIT_SAPMM06E_008
                    are the function modules where u need to do the coding.
and the fields u have added need to be included in the includes
CI_EKKODB
CI_EKPODB
of EKKO and EKPO for header level and item level respectively.
Regards,
Vishnu Priya
Message was edited by:
        Vishnu priya
Message was edited by:
        Vishnu priya

Adding a field to line item display in FBL3

Hello,
In trx "FBL3" I give asset G/l account, I would like to see "asset number", along with "Document No, Posting Keys, Posted date".I went to "change Lay out" added asset field. But still it showing only a column with heading asset but no values in it. Is there anything to be done in
trx "O7Z3", "O7R3" and then in "O7V2" assign FBL3 to the newly defined line layout and total variant. Is this correct way of proceeding or anything else needs to be done.
Can can any one suggest what needs to be done.
Thanks in advance,
Regards,
Anil

hi Anil,
i think that's not possible with fbl3.
the asset no. is only assigned to the reconciliation accounts by posting purchase/retirement/depr.
and not on other accounts - the reconciliation account
are normally not displayed with fbl3 - therefore are transactions from FI-AA (AW01N)
Andreas

Adding Custom fields to standard SAP-EBP application

Hi,
A functionality requires some custom fields to be added to the standard SAP-SRM EBP ( Manage business partners) application.
If I copy the whole BBP_VENDOR_CREATE program into a Z-program, and the BBPMAININT internet service to a Z-application, then would it be feasible??
Which is the best way to add custom fields in a SAP standard EBP application--in the 'Manage business partners' section.
Regards,
Goutam

Hi
I don't think it's easily possible to add custom fields to the existing transaction - BBPMAININT.
For adding customer fields you can refer the SAP OSS not - 672960, but I don't think it will be of much help here.
<b>Since SAP has not upgraded this transaction - BBPMAININT for a quite long time, you need to do all the logic and validation from your end.</b>
<u>Better to go for you own Z (custom program) and make your logic accordingly.</u>
Regards
- Atul

Adding EXIF Fields to Aperture - possible?

Similar Messages

Maybe you are looking for