Adding field in table control of standard transaction IW21 / IW22 / IW23

Hi ,
My requirement is to add a field in the table control in Transaction IW21/22/23 program SAPLIQS0 screen number 7334.
This screen is triggered when notification type is 'M4'.
Is it possible?
if yes , please throw some light on how to achieve it.
Thanks in advance
Prakash
Edited by: Prakash Nawale on Feb 17, 2010 8:48 AM
Edited by: Prakash Nawale on Feb 18, 2010 5:31 AM

You can add additional fields to the details sub-screen (SAPLIQS0-5010) via user-exit QQMA0012 (User Subscreen for Additional Data on Activity)
But from memory the system will not add these to screen 7334
PeteA

Similar Messages

Adding field to Table Control

Hi Folks,
     I have a requirement of adding a field in Table control of Standard SAP transaction also updating the same in standard SAP database table.
     The field is also not existing in the table, it is also added to the table using Append Structure.
    Will this be possible using some Screen Exit?
Thanks in Advance.
Punit

Hi Poorna,
   Thanks for the reply.
   I have to add field to the txn QM02. User will specify the value for the custom field in this txn and the same should be updated in the database table.
   The field is not a std SAP field, it is added to the table using append structure.
Thanks,
Punit

Adding field to Table Control using screen exit

Hi Folks,
I have a requirement of adding a field in Table control of Standard SAP transaction also updating the same in standard SAP database table.
The field is also not existing in the table, it is also added to the table using Append Structure.
Will this be possible using some Screen Exit?
Thanks in Advance.
Punit

Hi Punit,
There are various screen user exits(QQMA0001,QQMA0008,QQMA0010,
QQMA0011,QQMA0012) available for this transaction but all are related to adding a subscreen.So, I am not very sure whether we can modify a table control for this transaction. So, If possible if u r requirement still can be acheived with creation of a subscreen then it would do only if the exits which were mentioned above belongs to u r main screen..
Regards,
Swaroop

How to add a field and table control to BP transaction.

Hi,
I have a requirement to add a field and table control to the 'Control data' tab of the Transaction BP.
Can some on please help me if having a solution and with any relavant documents.
Thanks in advance.
Raj & Khader.

Also explore with EEWB tcode.
Refer this threads
Re: EEWB
Created New fields in Business Activity with EEWB
Cheers
Manohar

Custom Color required to table control in Standard transaction

Hi Expers,
I required to populate a table control row with custom color/s. The table control is belongs to SAP Standard transaction MF50.
Can you please suggest.
Thanks,
Prasad

Hello Madhu,
As indicated by u have have asked for the access key and have added a field. Where have u added this field. Secondly in which table are u going to update this material field once it starts getting displayed. Also have u put in code in ur PBO and PAI for the same. Please respond to the questions so that we can provide u with better option.

Adding fields in table control of infotype 0591

i want to add a column in table control of infotype 0591. i need to add age for every nominee.
i cant edit standard sap mp prog. so i thouhgt of copying it into zprogram, and now i have to assign it to that standard infotype so that this infotype will trigger my zmp program.
any suggestions on this?

hi..
a thread already exists with the same Subject.. pls check if it helps u....

Selecting a single row from table control of standard transaction via repor

Hi Experts,
I have a requirement of selecting a single row from standard trasaction via ineractive report.
For eg. for a given document number & item number, how can i select the specified item from transaction VA03.
I am using call transaction to naviagate to the screen but unable to select the specified item.
thanks in adavance for your Help.

You mean selecting the item via BDC?
Have you tried something like:
perform bdc_field       using 'BDC_CURSOR'
                              'VBAP-POSNR(01)'.
perform bdc_field       using 'RV45A-VBAP_SELKZ(01)'
                              'X'.
or whatever your dynpro is to select the first row?

To add a custom field in table control in transaction me21n and me22n

Hi Guru's,
I have a requirement to add a field in the table control at the time of creation of PO (ME21N). I enhansed the structure MEPO1211, but it is not appearing in the transaction. What should i do in order to bring that field in table control.
I implemented badis ME_GUI_PO_CUST and ME_PROCESS_PO_CUST by seeing some forum results.But i didnt get how to implement...
Please help me in this regard how to follow the steps and if possible please provide a sample code.
Thanks & Regards,
R.P.Sastry

hi,
Suppose in the there are three tabs BADI customer1, BADI customer2 and BADI customer3 at item level.
Say:
On BADI customer1 there are three fields FIELD1, FIELD2 and FIELD3.
On BADI customer2 there are two fields FIELD4 and FIELD5.
On BADI customer3 there are three fields FIELD6, FIELD7 and FIELD8.
Then the fields have to be added to EKPO (or requisite custom table as the need may be) and also fields are also to be added to custom structures.
Create a Structure ZSTRUCTURE1 which will contain the three fields FIELD1, FIELD2 and FIELD3.
Create another Structure ZSTRUCTURE2 which will contain the two fields FIELD4 and FIELD5.
Create another Structure ZSTRUCTURE2 which will contain the three fields FIELD6, FIELD7 and FIELD8.
The Structure STRUCTURE1 has to be passed for tab BADI customer1, the Structure STRUCTURE2 has to be passed for tab BADI customer2 and the Structure STRUCTURE3 has to be passed for tab BADI customer3.
Each custom tab/screen should have its own structure to handle the screen fields, but the screen field data has to be transfered to and from EKPO (or requisite custom table as the need may be) for database update/retrieve.
Hope this helps.
Regards,
Ritesh

Adding custom fields in table control of infotype 0591

Dear Experts,
My requirement is to add custom fields x y z in the Table contol of the standard infotype 0591 (Nominations) screen in PA30 tcode.
Is it possible to add the fields in table control after the fields share,guardian's address, without using access key.
if so, help me to know the procedure.
Please suggest.
Warm Regards
Sinde.

hi..
a thread already exists with the same Subject.. pls check if it helps u....

Modifying table control in standard program

Hi ,
Can any one tell me how to add a column in table control? My requirement is to add two columns ( custom fields ) into table control ( It is a standard program). I have added the column in the table and also in the table control. But when I am running the standard program, The newly added column is not there. But I have added in the perticular screen. Change is not reflected.
Actually in the standard screen totally 94 columns are there but where as when you run the program it is showing only 15 columns. can you tell me the reason?
I am working on Invoice payments F-28 screen 6102.
Can anyone help me on this please.

In the IMG (transaction SPRO), look at the path:
Financial Accounting
Accounts receivable and accounts payable
    Business transactions
      Incoming Invoices/Credit Memos
        Carry out and Check document settings.
There may be something there that will help.
Rob

Need to add 2 new columns to the existing table control of C223 transaction

Hi ABAP Gurus,
I have to do a screen enhancement for transaction C223.
Below is the requirement:
need to add 2 new columns to the existing table control of C223 transaction.
there is no customer exits, screen exit or user exit present for this transaction C223, i have found one enhancement spot for this transaction.
i dont have any idea how to do this in standard transaction C223, the table control in C223 saves the data to MKAL table and the table control uses the structure MKAL_EXPAND in the screen program.
i have created an append structure for the 2 fields to the standard table MKAL.
Can anyone please suggest me how this can be done in standard screen C223, will the enhancement spot can be used to do this....
please sugest...
Thanks & Regards

Hi Santosh,
Thanks for the reply. I have looked into this Enhancement Spot CPFX_SCREEN_SET , inside this there is only one method INPUT_DISABLED having below parameters
IM_MKAL     Importing     Type     MKAL                                                                                Production Version
EX_MSGID     Exporting     Type     SY-MSGID                                                                                Messages, Message
EX_MSGTY     Exporting     Type     SY-MSGTY                                                                                Messages, Message
EX_MSGNO     Exporting     Type     SY-MSGNO                                                                                Messages, Message
EX_MSGV1     Exporting     Type     SY-MSGV1                                                                                Messages, Message
EX_MSGV2     Exporting     Type     SY-MSGV2                                                                                Messages, Message
EX_MSGV3     Exporting     Type     SY-MSGV3                                                                                Messages, Message
EX_MSGV4     Exporting     Type     SY-MSGV4                                                                                Messages, Message
EX_INPUT_DISABLE     Exporting     Type     CHAR1                                                                                Display Only if X Was Set
the BADI definition present here is a SAP internal so we cant implement the BADI , but we can created a enhancement spot implementation for this. as per my understanding on this the enhancement spot is only for making the table control fields display / change . i dont think this can be used to add two new coloumns to C223 table control.
I am not sure thats why seeking your help/valuable sugestion on this.
Please provide your sugestion on this , so that i can come to conclusion on this issue.
Thanks & Regards
Siddhartha Mishra

To Disble the Field in Table Control after clicking Save button

Hi,
I have a requirement as follows. i need to disable one field in the table control after clicking save button. i tried with SCREEN elements but it disabling whole the table control but i need to disable that particular one record only in the table control. i found Structure CXTAB_COLUMN in documentaion. it has the properties like invisible. can any body tell how can we disble that particular field in table control only for the one record. and how can we use CXTAB_COLUMN.
Thanks in advance.

hi,
do like this...
in USER_COMMAND_1000 module of PAI,
MODULE user_command_1000 INPUT.
CASE ok_code.
    WHEN 'BACK' OR 'UP' OR 'CANC'.
      LEAVE PROGRAM.
    WHEN 'SAVE'.
      fl = 1.
      GET CURSOR LINE lin.
ENDCASE.
ENDMODULE.                 " user_command_1000 INPUT
and make on module disable in Loop Endloop in PBO.
and write like this...
MODULE disable OUTPUT.
LOOP AT SCREEN.
    IF tab1-current_line = lin AND fl = 1.
      screen-input = 0.
    ELSEIF tab1-current_line < lin.
      screen-input = 0.
    ELSE.
      screen-input = 1.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.
ENDMODULE.                 " disable OUTPUT
here fl and lin both are type i.....
and there will b one module in PBO
MODULE tab1_change_tc_attr.
in that put if condition....
MODULE tab1_change_tc_attr OUTPUT.
IF sy-ucomm <> '' AND sy-ucomm <> 'SAVE'.
    DESCRIBE TABLE itab LINES tab1-lines.
ENDIF.
ENDMODULE.                    "TAB1_CHANGE_TC_ATTR OUTPUT
ur problem will solve...
reward if usefull....
Edited by: Dhwani shah on Jan 2, 2008 1:17 PM

Search help for a field in table control based on another field value

Hi,
I want to attach the Search help for a field in table control based on another field value.
Please help me asap.
Will be highly rewarded

HI,..
Check these links
search help in table control
Re: How to create Search Help for a field in Table control !!
How to create Search Help for a field in Table control !!
F4 Help In Table Control
Control table F4 help
Problem in F4 help in screen field
check this code
DATA: BEGIN OF it_value4 OCCURS 0,
         TEXTCODE LIKE ZXX-TEXTCODE,
         TEXTDESC LIKE ZXX-TEXTDESC,
       END OF it_value4.
progname = sy-repid.
dynnum   = sy-dynnr.
         SELECT TEXTCODE TEXTDESC
           FROM xxxx
           INTO CORRESPONDING FIELDS OF TABLE<b> it_value4</b>
          WHERE LOSS_CODE =<b> IT_VALUE1 .</b>
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield    = 'TEXTCODE'
      dynpprog    = progname
      dynpnr      = dynnum
      dynprofield = 'ITVALUE-TEXTCODE' "-->UR 4 th filed value in screen
      value_org   = 'S'
    TABLES
      value_tab   = it_value4.
endmodule.
Message was edited by:
        veereshbabu ponnada

How to disable fields in Table control???

Hi
How to disable fields in Table control??? I want to disable particular row in table control when enter datas are correct.lets take as example ME41 or ME51 table control.
Can anyone tell how to do disable in this table control
Points will be rewarded if its helpful.
Thanks
senthil

If you want to disable the row then you can use
in pbo module create a module in side loop,
loop at itab with control tc.
module change_screen.
endloop.
in module,,,,,
loop at screen.
if condition.
screen-input = 0.
modify screen.
endif.
endloop.
Regards
Vijay

Attaching search help to a field in table control

Hi,
Please suggest a way to attach search help functionality to a field in table control.
My requirement os based on matnr the f4 help for the next field shud come.
I gave the func mod dunp_values_read, but the internal table i pass does not return with the fieldvalue of matnr field.
is there any func mod to read values of screen fields in table control so that based on that I can go to func mod f4_init_....
Will be rewarded.

Check the FM: HELP_VALUES_GET_WITH_TABLE_EXT
Check the documentation for example code.
regards,
Ravi

Adding field in table control of standard transaction IW21 / IW22 / IW23

Similar Messages

Maybe you are looking for