Adding more VLANs for mapping for an H-REAP AP

Why can't I add more locally switched VLANs to the VLAN mapping table of an H-REAP AP... I have a total of 3 but as I understand it I can have a maximum of 8 locally switch H-REAP VLANs...
What abd
Basic config from command line is
interface create lme-spare 703
interface vlan lme-spare 703
interface port lme-spare 1 2
apgroup add default-group
apgroup interface-mapping add default-group 4 lme-spare
wlan apgroup nac-snmp disable default-group 4
wlan create 4 XTS testing xts-lme
wlan nac snmp disable 4
wlan interface 4 lme-spare
wlan multicast interface 4 disable
wlan broadcast-ssid disable 4
wlan radio 4 802.11g-only
wlan session-timeout 4 1800
wlan h-reap local-switching 4 enable
wlan h-reap learn-ipaddr 4 enable
wlan wmm allow 4
However, add another mapping doesn't work...
(Cisco Controller) config>ap h-REAP vlan wlan 4 703 ?
<Cisco AP> Enter the name of the Cisco AP.
(Cisco Controller) config>ap h-REAP vlan wlan 4 703 tradefloorAP1
Invalid parameter specified.
(Cisco Controller) config>
Where am I going wrong- could have couple of pointers please?

Hello Adrian,
The VLAN mapping is not taking hold because that AP is currently not servicing WLAN 4 (from the screenshot). Is this AP part of an ap group? If so, have you added wlan 4 to that AP group configuration?
If the AP is in the default-group, then it should be servicing wlan 4...
What version of WLC code and model of AP are in use?
-Patrick Croak
Wireless TAC

Similar Messages

Adding more columns to ME51N for all users.

I want to add 2 extra columns to the standard Purchase Requisition ME51n, a column for single price per item and net price per item, where and how do I do it.
Thank you.

Hi,
Try with whther the specified fields are there in the SPRO-MM-Purchasing-Purchse Requisitions-DEfine screen layout at document level,
?If not consult u r ABAPEr,I think u cld do it with Smart Form
Hope its clear to u
Thanks adn regards,
Sravanthi

Adding more RAM to iMac for After Effects

I've got a 27" 3.1 ghz Intel Core i5 iMac with 8gb of RAM. If I increase it to 16gb of RAM will this help speed up rendering and previews. Will this also help when working with effects and HD video?
Any help on this would be great as reading about this subject is confusing...

Memory has nothing to do with rendering speed, it merely allows to apply more effects and using more layers before getting into pinches.
Mylenium

Mandatory fields for mapping in ORDERS idoc.

Hi
I m working on File to idoc scenario for creation of sales order in ECC 6.0 , now I want to know what are the mandatory fields in ORDERS idoc which needs to be populated or else disbaled so that the sales order gets created properly in the ECC 6.0..
Pl let me know the method of finding mandatory field for mapping for any idoc and which fileds of idoc are to be disabled.
Pl help ..
ans will be rewarded .
thanks & rgds
mojib

HI,
U can disable the control record segment and in the IDOC adapter use the option apply control record from payload.
If you have set the Apply Control Record Values from Payload indicator in the receiver IDoc adapter, the following fields are filled from the IDoc-XML payload:
·        MESCOD
·        MESCFT
·        TEST
·        EXPRSS
·        STD
·        STDVRS
·        STDMES
·        SNDSAD
·        SNDLAD
·        RCVSAD
·        RCVLAD
·        REFINT
·        REFGRP
·        REFMES
·        STATUS
·        DIRECT
·        OUTMOD
·        CREDAT
·        CRETIM
read the information in below link:
http://help.sap.com/saphelp_nw70/helpdata/EN/ab/bdb13b00ae793be10000000a11402f/frameset.htm
thnx,
chirag

More than 3 AR for one Sales Order in relationship map

Hello,
i would need some advice on the following: If you have more than 3 Invoice for one Sales order these are not shown seperately in the relationship map. SAP could reproduce the issue and refers to it as normal system procedure at the moment. They adviced me to post a thread here.Is there any way you could make the invoices be seen one by one.
SAP Version 8.81 PL 5
Thanks a lot for any advices on this topic
Vanessa
Edited by: Vanessa Schürer on Jan 16, 2012 2:45 PM

Welcome to the forum.
If you have any suggestions you post them on sap's new idea collaboration page. You do bring up a good point and hopefully in 8.82 it will be resolved as the relationship map was not originally on the road map. Hopefully they can develop this feature.

UDF or Mapping for removing more items

Hi
I'm in a need to implement a data validation using UDF or Graphical Mapping
File has the data like ONE header record (5 fileds) and ONE item record (8 fields) as follows
header:field1field2 field3 field4 field5
item:field1field2 field3 field4 field5 field6 field7 field8
header:field1field2 field3 field4 field5
item:field1field2 field3 field4 field5 field6 field7 field8
header:field1field2 field3 field4 field5
item:field1field2 field3 field4 field5 field6 field7 field8
and so on.
Here my requirement is one header should have only one item. Sometimes either header or items are repeating more than one time .. in that case lastest header or item should be updated in target fields.
To say clearly ... one header and one item & one header and one item and so on to be updated.
In case any header has two items then first item to be deleted and second item to be updated.
Kindly advise me how to go about this requirement.
Thanks.

Do the mapping as
Direct assignment of Source header to Target Header and same for fields inside the Header.
create a UDF (choose context).very simple UDF with a single statement.
result.addValue(a[a.length-1]);
Item Node mapping and Its Fields
Item------>UDF------>Item(Target)
field1(Change the context to Header)------->UDF----->field1(under Target Item)
Do the same mapping for remaining fields Under Item as you do for field1
I have tested the above UDF and the mapping..It is working according to your requirement.

On activating persistent class: There is no mapping for one or more fields

Hi all,
I'm using an ECC 6.0 system.
I've just created a persistent class and defined the persistence. When I try to activate the class activating fails and I get the message "There is no mapping for one or more fields."
I did not, in fact, use all the fields of the database table I defined the persistence on. When I do use all the fields activating the class works without a problem.
However, as far as I know it should be possible to select only some of the fields when defining the persistence (the only fields I have to select are all the key fields of the table and I've done this).
Has anybody encountered the same problem or has anybody any idea on this?
Cheers,
Kathy

Hi Kathy,
this is exactly what I meant.
If you'd like, then you can also take a look at the documentation: http://help.sap.com/saphelp_nw04/helpdata/en/b0/9d0a3ad259cd58e10000000a11402f/frameset.htm
There under Mapping, you can find:
"You must map all columns of a database table to attributes. If you only want to manage some of the columns using Object Services, you must create a database view."
Making attributes private doesn't change the fact, that you still map all fields. If you have a lot of fields, which you don't want to map, then I will again suggest, that you define a DB-view. This will boost the performance of your implementation.
In case you need "quality 1st" performance, then I would suggest to use an ABAP implementation with internal tables, instead of the Persistent Service.
HTH,
Hristo

More detailed maps for iMovie "11

Hello Everyone,
Curious if there are additional maps available for the Map titles in iMovie. I am trying to have more detail of Hawaii for a project but the islands remain small on the globe maps. Are their plug-in's or ways to make the geography bigger? Thanks to all who might know. - Carlyle

Carlyle Coash wrote:
.... but the islands remain small on the globe maps. ...
on a global scale, Hawaii IS small ...
no, no additional maps nor plug-ins, help  to improve this tool:
http://www.apple.com/feedback/imovie.html
consider creating your own 'maps', take screen-shots from google.maps into your Project etc.

[svn] 4286: Bug: BLZ-282: added property name to debug info for Map serialization

Revision: 4286
Author: [email protected]
Date: 2008-12-10 18:29:26 -0800 (Wed, 10 Dec 2008)
Log Message:
Bug: BLZ-282: added property name to debug info for Map serialization
checkintests: pass
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-282
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/io/amf/Amf3Input.java

Guo,
I see a question mark in the sql statement, instead of the Oracle-style bind parameter notation which would be ":1". Can you change your VO to use Oracle-Style bind params and see whether it works?
Steven Davelaar,
JHeadstart Team.

SAP Cloud For Customer : Code List Mapping For Material or Product

Hi Experts,
I wnat some information about the SAP cloud code list mapping.
If i want to replicate Material / Product from SAP ECC / SAP CRM to SAP cloud for customer then any code list mapping entry we need to maintain in cloud side?
Or
Any Code list mapping for Material or Product in Cloud?
If yes anyone have list with SAP ECC / SAP CRM table details?
Many Thanks
Mithun

Hi Mithun,
Code list data type is available in SAP Cloud. As of my knowledge I trying to find is code list mapping is available or not.
Yes we can replicate exactly the same values in SAP Cloud that we see in the SAP ECC / SAP CRM. For this, We need to create custom 'Code list' for the required one you want and assign that code list data type name which you created in the previous step to the required element in the BO.
For creating the code list data type: Go the Solution Explorer, Right Click on the Solution name, Click on 'Add' and Click on "New Item', then Add new item window will open with Installed templates, you will see the list of templates select the code list data type. Give the name as per your requirement starting with Z, max length is 27 only. click next, in 2/3 step, here you can add the list of values you want, add description to them. after clicking on the finish. activate the solution. Go to the BO and for the required element add the name you provided in creating the Custom code list ( ZXxxxxCode ) . Save and activate the BO as well as the solution then update the metadata in the designer part and in date model also, In data model, bind the required root element which is on the left pane to the required BO element which are in the right pane. Click Save and activate here also after the changes are made. finally activate the solution. In the solution explorer Right click on the OIF ui component and click on preview, it will open in the browser, here you will find the custom list you created, for the required one which you added code list date type name for the element in the BO.
Mithun.. Sorry if I"m confusing you more on this. let me know is this solution enough for the requirement you are searching.
Best Regards
Bandhav

Issue with xsd Data type mapping for collection of user defined data type

Hi,
I am facing a issue with wsdl for xsd mapping for collection of user defined data type.
Here is the code snippet.
sample.java
@WebMethod
public QueryPageOutput AccountQue(QueryPageInput qpInput)
public class QueryPageInput implements Serializable, Cloneable
protected Account_IO fMessage = null;
public class QueryPageOutput implements Serializable, Cloneable
protected Account_IO fMessage = null;
public class Account_IO implements Serializable, Cloneable {
protected ArrayList <AccountIC> fintObjInst = null;
public ArrayList<AccountIC>getfintObjInst()
return (ArrayList<AccountIC>)fintObjInst.clone();
public void setfintObjInst(AccountIC val)
fintObjInst = new ArrayList<AccountIC>();
fintObjInst.add(val);
Public class AccountIC
protected String Name;
protected String Desc;
public String getName()
return Name;
public void setName(String name)
Name = name;
For the sample.java code, the wsdl generated is as below:
<?xml version="1.0" encoding="UTF-8" ?>
<wsdl:definitions
name="SimpleService"
targetNamespace="http://example.org"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://example.org"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
>
<wsdl:types>
<xs:schema version="1.0" targetNamespace="http://examples.org" xmlns:ns1="http://example.org/types"
xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:import namespace="http://example.org/types"/>
<xs:element name="AccountWSService" type="ns1:accountEMRIO"/>
</xs:schema>
<xs:schema version="1.0" targetNamespace="http://example.org/types" xmlns:ns1="http://examples.org"
xmlns:tns="http://example.org/types" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:import namespace="http://examples.org"/>
<xs:complexType name="queryPageOutput">
<xs:sequence>
<xs:element name="fSiebelMessage" type="tns:accountEMRIO" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="accountEMRIO">
<xs:sequence>
<xs:element name="fIntObjectFormat" type="xs:string" minOccurs="0"/>
<xs:element name="fMessageType" type="xs:string" minOccurs="0"/>
<xs:element name="fMessageId" type="xs:string" minOccurs="0"/>
<xs:element name="fIntObjectName" type="xs:string" minOccurs="0"/>
<xs:element name="fOutputIntObjectName" type="xs:string" minOccurs="0"/>
<xs:element name="fintObjInst" type="xs:anyType" minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="queryPageInput">
<xs:sequence>
<xs:element name="fPageSize" type="xs:string" minOccurs="0"/>
<xs:element name="fSiebelMessage" type="tns:accountEMRIO" minOccurs="0"/>
<xs:element name="fStartRowNum" type="xs:string" minOccurs="0"/>
<xs:element name="fViewMode" type="xs:string" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
</xs:schema>
<schema xmlns="http://www.w3.org/2001/XMLSchema" targetNamespace="http://example.org"
xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:tns="http://example.org" xmlns:ns1="http://example.org/types">
<import namespace="http://example.org/types"/>
<xsd:complexType name="AccountQue">
<xsd:sequence>
<xsd:element name="arg0" type="ns1:queryPageInput"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="AccountQue" type="tns:AccountQue"/>
<xsd:complexType name="AccountQueResponse">
<xsd:sequence>
<xsd:element name="return" type="ns1:queryPageOutput"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="AccountQueResponse" type="tns:AccountQueResponse"/>
</schema>
</wsdl:types>
<wsdl:message name="AccountQueInput">
<wsdl:part name="parameters" element="tns:AccountQue"/>
</wsdl:message>
<wsdl:message name="AccountQueOutput">
<wsdl:part name="parameters" element="tns:AccountQueResponse"/>
</wsdl:message>
<wsdl:portType name="SimpleService">
<wsdl:operation name="AccountQue">
<wsdl:input message="tns:AccountQueInput" xmlns:ns1="http://www.w3.org/2006/05/addressing/wsdl"
ns1:Action=""/>
<wsdl:output message="tns:AccountQueOutput" xmlns:ns1="http://www.w3.org/2006/05/addressing/wsdl"
ns1:Action=""/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="SimpleServiceSoapHttp" type="tns:SimpleService">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="AccountQue">
<soap:operation soapAction=""/>
<wsdl:input>
<soap:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="SimpleService">
<wsdl:port name="SimpleServicePort" binding="tns:SimpleServiceSoapHttp">
<soap:address location="http://localhost:7101/WS-Project1-context-root/SimpleServicePort"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
In the above wsdl the collection of fintObjInst if of type xs:anytype. From the wsdl, I do not see the xsd mapping for AccountIC which includes Name and Desc. Due to which, when invoking the web service from a different client like c#(by creating proxy business service), I am unable to set the parameters for AccountIC. I am using JAX-WS stack and WLS 10.3. I have already looked at blog http://weblogs.java.net/blog/kohlert/archive/2006/10/jaxws_and_type.html but unable to solve this issue. However, at run time using a tool like SoapUI, when this wsdl is imported, I am able to see all the params related to AccountIC class.
Can some one help me with this.
Thanks,
Sudha.

Did you try adding the the XmlSeeAlso annotation to the webservice
@XmlSeeAlso({<package.name>.AccountIC.class})
This will add the schema for the data type (AccountIC) to the WSDL.
Hope this helps.
-Ajay

Questions to a Mapping for IDOC-to-File Scenario

Hi all,
I want do develop a Message-Mapping for an IDOC-to-File Scenario. A SAP System sends an IDOC to the XI-System and the XI-System should make a mapping an send a XML-File to a FTP-Server. The Strukture of the target message is very easy:
<xdoc>
   <Invoice>
      @purno
      <HeaderInfo>
         <invno/>
         <shipdate/>
         <extvalue/>
      </HeaderInfo>
      <DetailInfo>
         <LineItem>
            @lineno
            <vpartno/>
            <descrip/>
            <qtyord/>
            <cost/>
            <vendmemo/>
         </LineItem>
      </DetailInfo>
   </Invoice>
</xdoc>
The source message is an IDOC. This IDOC can contain one or more positions (E1EDP01). Those different positions should be mapped into different LineItem's (see target structure) -> so in the target file one or more LineItems can appear.
Is it possible to implement this process with a common message-mapping or have I to implement a business process?
Thanks
with best regards
Christopher

Hi Christopher,
<i>Is it possible to implement this process with a common message-mapping or have I to implement a business process?</i> - This thing is possible with common message mapping......you dont need business proces for it.......in msg mapping after taking the source IDOC and target xml struc, map the E1EDP01 field to LineItem field.......just check the occurance of these nodes.....it should be 0..unbounded.........so as many E1EDP01 nodes will be there in idoc, that many LineItem nodes in target will be created.......
Thanks,
Rajeev Gupta

Submitting site maps for multiple sites to Google

I sort of glommed on to the end of the thread "meta and google-ing...i give up," but I'll start a fresh post here with this:
I have three sites in iWeb, all of which have their own registered Go Daddy domain names and are forwarded to .mac without masking. I followed James Tseng's instructions and successfully submitted to Google and verified my "www.mac.com/user/iWeb" url.
I also successfully uploaded a site map for one of my sites (let's just call it Site 1), which is in my iWeb folder (not the Site 1 folder).
My question: I assume I can create separate site maps for Sites 2 and 3. Do they also go in the same iWeb folder as the first one? Is that possible if they're all named "sitemap.xml" or do they have to be given different names?
Also... if I want to submit these three sites to other engines like MSN and Yahoo, can I submit the forwarded domain names, or will these engines not follow the forwarding to my .mac url?
If that's the case, is it best to submit the single "www.mac.com/user/iWeb url" as I did with Google, or should I submit each site's .mac url separately?
Thanks in advance for your help!
Mitch

<As posted in the the other thread...>
Hi Mitch....
I hope you've been finding all this helpful so far! It's always fun to see just how much feedback you can get from Google. Sort of gives you a feeling that "you've arrived". haha.
Regarding your question about sitemaps and multiple sites.... My strategy is this... I like to give Google sort of the broadest catch that I can. That's why I really suggest to people that they register the most general URL... http://web.mac.com/username/iWeb/ . You see how that really leaves the door open for the possibility of multiple sites, without having to register multiple sites. Google really doesn't care that you call them separate sites...to Google they appear as part of the same site...with the same base verified URL.
So with that registered URL, there really is only one place where the verification file and sitemap.xml file can go. And that place is in the iDisk/Web/Sites/iWeb/ folder. And there is really only a need for a single verification file and a single sitemap.xml file, no matter how many sites you have. The point here isn't telling Google that you have more sites...it's just about telling Google that you have more LINKS in the site that it already knows about.
So how do you do this? Just spider your new site or gather the links in your own way and then copy and paste the links (just the links section...not the first two lines or the last line of the code) into the sitemap.xml file that you have already submitted before. Then resubmit it to Google.
Does this make sense? Let me know what you think.

Require a Message mapping for this Logic.

Hi Experts,
I require a Message mapping for this Logic.
In the Source there are 4 fields and, the Target side, the fields should appear like this.
Source Structure- File
Record
|-> Header
Order_No
Date
|-> Item
Mat_No
Quantity
Target Structure-IDoc
IDoc
|-> Header
|-> Segment
Delivery_Order_No
Recv_Date
|-> Item
|-> Segment
Delivery_Order_No
Material_Num
Recv_Quantity.
The Logic is for every Order number an IDOC is generated.And if the Material num matches then the quantity should be added. and important note is that the material numbers are different for every order number. That means if a material number is 2 in the order number A. Then the material number can never be 2 in any of the order numbers.Here is the following with an example for the above scenario.
For example:-
we have
Source Structure- File
Order-no Date Mat_No Quantity
1 01/02/2011 A 10
1 01/02/2011 B 15
1 01/02/2011 A 10
2 01/02/2011 C 10
2 01/02/2011 C 10
3 01/02/2011 D 20
3 01/02/2011 D 10
3 01/02/2011 E 25
Target Structure-IDoc
Delivery_Order_No Recv_Date Material_Num Recv_Quantity
1 01/02/2011 A 20
1 01/02/2011 B 15
2 01/02/2011 C 20
3 01/02/2011 D 30
3 01/02/2011 E 25
So for this example total of 5-Idocs created. That means for this example if Order_No is 1 When the Mat_No is A the quantity gets added. For this Scenario 1 IDoc with four Fields 2 in Header(Delivery_Order_No, Recv_Date) and 2 in Item(Material_Num, Recv_Quantity) is generated by adding the quantity field in the Target Side. Similarly if Order_No is 1 when the Mat_No is B then separate IDoc is generated with four Fields 2 in Header(Delivery_Order_No, Recv_Date) and 2 in Item(Material_Num, Recv_Quantity) in the Target Side. Similarly, if Order_No is 2 when the Mat_No is C, an IDoc is generated with four Fields 2 in Header(Delivery_Order_No, Recv_Date) and 2 in Item(Material_Num, Recv_Quantity) by adding the quantity field in the Target Side. ike wise the process goes on upto 3.Kindly do the needy..
Thanq very much in advance..
Edited by: Prashanth Bharadwaj on Oct 17, 2011 1:29 PM

Hi Prashanth,
Concatinate the two fields OrderNo and MaterialNo and follow the below logic which will resolve your problem.
concatinationOfOrderNo&MaterialNo>removecontext>sort>splitByValueChange>collapseContext-->IDOC
concatinationOfOrderNo&MaterialNo>removecontext>sort>splitByValueChange>collapseContext>splitByEachValue>subString(0,1)-->Delivery_Order_No
formatByExample>collapseContext>SplitByEachValue-->Recv_Date
FormatByExample:
input1:resulrOfSortByKey
input2:concatination>removecontext>sort-->SplitByValuChange
sortByKey:
input1:concatination-->removecontext
input2:date-->removecontext
concatinationOfOrderNo&MaterialNo>removecontext>sort>splitByValueChange>collapseContext>splitByEachValue>subString(1,1)-->Material_Num
formatByExample>sum>Recv_Quantity
FormatByExample:
input1:sortByKey
input2:concatination>removecontext>sort-->SplitByValueChange
SortByKey:
input1:concatination-->removecontext
input2:Quantity-->removeContext
Regards,
Priyanka.

Connecting to EMS fails with No mapping for the Unicode character exists in the target multi-byte code page

I am getting the following error when trying to connect to both my exchange servers.
New-PSSession : [ex2013-002.nafa.ca] Connecting to remote server ex2013-002.nafa.ca failed with the following error
message : No mapping for the Unicode character exists in the target multi-byte code page. For more information, see
the about_Remote_Troubleshooting Help topic.
At line:1 char:12
+ $Session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri ht ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : 1113,PSSessionOpenFailed
EMS used to connect ok. I am not sure if there is any connection but Outlook was installed recently on the exchange server to enable mailbox level backups.
Any help would be appreciated.
Steve Hurst

Hello Steve,
Firstly, you cannot install Outlook with Exchange because they share certain dll files.
About the EMS question, I suggest we try rebuilding the powershell virtual directory. If it still does not work, check the application log for more referernce.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Adding more VLANs for mapping for an H-REAP AP

Similar Messages

Maybe you are looking for