Adding multiple rows to the HtmlDataTable in bean.

Hi,
I am facing a problem in displaying the table data which I am constructing in my Bean using HtmlDataTable.
I am constructing a HtmlDataTable and binding it to a <h:dataTable>. As per the requirement, I need to display the data in different
rows of the table. My table has a single column.
in my JSP, I have
<h:dataTable id="doclist" value="#{empobject.docListTable}" binding="#{empobject.docListTable}" />
in my java bean, I have
<code>
 public HtmlDataTable getDocListTable() {
 FacesContext facesContext = FacesContext.getCurrentInstance();
 docListTable=(HtmlDataTable) facesContext.getApplication().createComponent(HtmlDataTable.COMPONENT_TYPE);
 docListTable.setRows(10);
 // Column1 
 UIColumn columnComponent1 = new UIColumn();
 List childrenList = docListTable.getChildren();
 //Column is added.
 childrenList.add(columnComponent1);
 //Adding the header info for the column
 columnComponent1.setHeader(new HtmlOutputText().setValue("Header"));
 // DataModel
 ListDataModel listDataModel = new ListDataModel();
 ArrayList list =(ArrayList)columnComponent1.getChildren();
 FIRST ROW 
 HtmlOutputText rowComponent = new HtmlOutputText();
 rowComponent.setValue("Training ");
 rowComponent.setId("Row1");
 rowComponent.setStyleClass("Section");
 list.add(rowComponent);
 SECOND ROW 
 HtmlOutputText rowComponent1 = new HtmlOutputText();
 rowComponent1.setValue("OPeration");
 rowComponent1.setId("Row11");
 rowComponent1.setStyleClass("Section");
 list.add(rowComponent1);
 listDataModel .setWrappedData(list);
 // docListTable.setValue(listDataModel);
 return docListTable;
</code>
 Here I am assuming that 2 rows were added to the table. But what's happening is
1) Table header is added properly.
2) Insteadof having 2 table rows, within a single row, both outputtext values displayed. (i.e Training OPeration)
As I am pretty new to JSF world, I am requesting experts to give me solution as to display the information in two rows.
In real, my requirement is so complex as I will have to display the <td> in different styles and all depending upon some conditions.
But, this above mentioned problem has become a major hurdle to proceed further. As somany complexities involved, I wanted to construct this
table in my java bean only.
Please help me out in adding some sample code while giving a solution.
Thanks,
-Nir

Similar Messages

Adding multiple rows to the view

Hi guys,
I have a table (PlannerTab)to which a view (PlannerVO)is attached the table has a add new row button and at the page level i have a save button which will commit the database.
The user clicks the add new row button and enters values for the columns
when he clicks save i need to default someother view attributes based on the values he has entered .. for example if he has entered employeename i need to get the employee id from the db and populate my view object attribute(employeeid).... how do i handle this esp when the user creates more than 1 row before he commits the database.
Thanks in advance ......
Tom

Tom,
How is user entering the employee name? Is it a normal text input field? Then what will happen if the entered name is wrong. I will suggest to use an LOV for field like that so that when you select the name, the corresponding Id will also get stored on page context if you configure properly.
Otherwise if you are not bothered about the validated data, you can put the logic to get the Id from name while saving logic.
--Shiv

How can i select some row from multiple row in the same group of data

I want to select some row from multiple row in the same group of data.
ColumnA
Column B
1 OK
1 NG
2 NG
2 NG
3 OK
3 OK
I want the row of group of
ColumnA if ColumnB contain even 'NG'
row , select only one row which Column B = 'NG'
the result i want =
ColumnA Column B
1 NG
2 NG
3 OK
Thank you

That's some awful explanation, but I think this is what you were driving at:
DECLARE @forumTable TABLE (a INT, b CHAR(2))
INSERT INTO @forumTable (a, b)
VALUES
(1, 'OK'),(1, 'NG'),
(2, 'NG'),(2, 'NG'),
(3, 'OK'),(3, 'OK')
SELECT f.a, MIN(COALESCE(f2.b,f.b)) AS b
FROM @forumTable f
LEFT OUTER JOIN @forumTable f2
ON f.a = f2.a
AND f.b <> f2.b
GROUP BY f.a

How would I go about adding multiple rectangles using the same lines of code?

How would I go about adding multiple rectangles using the same lines of code? I would prefer to just run through a set of code every time I need a polygon. If I just have to create multiple polygon adding statements that's fine but I'd prefer just 1.

>>How would I go about adding multiple rectangles using the same lines of code?
You could create a method that creates and returns x number of Rectangle elements:
public IEnumerable<Rectangle> CreateRectangles(int numberOfRectsToCreate)
for (int i = 0; i < numberOfRectsToCreate; ++i)
Rectangle rect = new Rectangle();
rect.Fill = Brushes.Blue;
rect.Width = 100;
rect.Height = 100;
yield return rect;
..and then call this method from anywhere in your code:
IEnumerable<Rectangle> rects = CreateRectangles(5);
foreach (Rectangle rect in rects)
//add to StackPanel or do whatever with the Rectangle elements:
yourStackPanel.Children.Add(rect);
>>If I just have to create multiple polygon adding statements that's fine but I'd prefer just 1.
When adding Point objects to a Polygon you can only add one per call to the Add method but you could call the Add method inside a loop, e.g:
for(int i = 0; i < 10; ++i)
//add to StackPanel or do whatever with the Rectangle elements:
Polygon p = new Polygon();
p.Points.Add(new Point());
Please remember to close your threads by marking helpful posts as answer and then start a new thread if you have a new question. Please don't post several questions in the same thread.

Free alternatives to JTable that allow multiple rows in the header?

My goal is to make a table with two or more rows in the column header. For instance, imagine I want to have the numbers of the days in the calendar as columns, then I want to have a row over them with the months, spanning over multiple days, then I want to have a row over that with the year, spanning over multiple months. I want these rows to be in the column header so they're always visible as you scroll down.
Right now, I'm doing this with the first rows of the grid, out of the header, so they get out of view when the user scrolls down. Also, by being in the actual grid, they screw up sorting of the table.
So I need 2 features. Multiple rows in the column header and the ability to merge multiple cells in the header.
I've see some code to do this but it seemed too complicated so I want to see if I can find a component that does this out of the box first. I've seen 2 3rd party JTable-based components that do this but they're paid products and paying the full price of a component bundle for these features isn't a very attractive idea.
So, does anyone know of a good table component that does this?

Have a look at JXTable from the SwingX project. You should be able to find it via Google.

Adding multiple rows

How do I add multiple rows at once? Thanks,
Owen

See page 69 of the English edition of the user guide for the basics. If you've already been there and read that, you may be saying; yes, but I want to add them in the middle of my table. That's an extension of adding rows to the end of the table. Add as many rows as you need, at the end of the table. Then select the new rows by click-dragging across the row labels. Then grab the selection by one of the labels and pull to the left to separate the new rows from the rest of the table. Without letting go, move the cursor up the table to where you want the new rows to reside, just to the right of the labels, and you will notice that insertion marks, a split line, appear along the row borders under the mouse. When you reach the destination, let go of the mouse switch and the blanks will drop in where you want them.
Jerry

Want to update multiple rows of the report but getting a bug.

hi,
I am trying to update multiple rows of a report.For that I have created a teport with dynamic checkbox generated using ---HTMLDB_ITEM.CHECKBOX(1,utt.trouble_ticket_id) " "----.Checkboxes are rendered perfectly on the report.
but when I tried to update the selected rows of the report as given in the documentation
begin
:P16_priority:=htmldb_application.G_F01.count;
for i in 1..htmldb_application.G_F01.count
loop
update umanage_trouble_ticket set severity =:P16_priority where
trouble_ticket_id = htmldb_application.G_F01(i);
end loop;
end;
I found that all the rows are updated.not only selected rows.
and the count it gives =no of rows returned + no of rows selected.
Please help me regarding this.
thanx.
BHARAT

Hi Bernhard,
I think that u didnt get y problem.
When I take the value from "htmldb_application.g_f01(i)" then it should return id's of rows that are checked but when I do that it returns id's of all the rows.So I am not able to update only checked rows.
from id's of rows i mean value provided when generating checkboxes through query.
htmldb_item.checkbox(1,trouble_ticket_id) " "
I am approching to the solution as specified in the documentation. "Adding check boxes to each row in a report".
but still cant find any solution.
thanx that u showed some intrest in my problem.
If u can get the solution reply soon.
Regards
BHARAT

Adding new row to the reports list page

How can I add a new report row in the reports list of the reports tab.
Ex: a new row to the report "users by Date of Join report" is to be added
How can we add Please help me out in this

I am facing the same problem!
camickr wrote:
Try adding an empty row containing a null value for the String instead of the empty String.camickr, it will not help, the DefaultRowSorter in the "*+compare(int model1, int model2)+*" method return -1 if the first value is null and 1 if the sacond value is null. and incase of DESCENDING it mult by -1.
 // Treat nulls as < then non-null
 if (v1 == null) {
 if (v2 == null) {
 result = 0;
 } else {
 result = -1;
 } else if (v2 == null) {
 result = 1;
 } else {
 result = sortComparators[counter].compare(v1, v2);
 if (sortOrder == SortOrder.DESCENDING) {
 result *= -1;
 }And this is the real problem!
The empty line is sorted as the smallest value and incase of DESCENDING it will be the first line (because of the mult by -1).
We could have overide it and incase of the empty row(usualy the last row) do not mult by -1 in DESCENDING mode.
But the problem is that the "+*compare*+" method and it's caller "*+Row+*" inner class are private :-(
It is not wise to do it but we can do like kmp83 wrote:
kmp83 wrote:
copy/duplicate "private" code from DefaultRowSorter into my extended class.Anyone have another suggestion?

Multiple instances of the same entity bean?

I am designing a J2EE application that is made up of a number of separate components that each have a well-defined responsibility. Each component is made up of one or more J2EE components (web clients and EJBs). I want to design the application such that it is easy in the future to deploy each component (or a group of components) on different servers. In order to do this I need to make sure that the interfaces between each component are exposed as remote interfaces (but I will use local interfaces inside each component). However, there are a number of entity beans that need to be accessed by more than one component. I am wondering how best to expose these entity beans. I believe there are a number of options:
1. Expose remote interfaces on each of the shared entity beans. The disadvantage of this approach is that it is inefficient and that I will not be able to take advantage of container managed relationships. (I am intending to use container managed persistence.)
2. Create a facade object (stateful session bean) for each of the entity beans which exposes a remote interface and in turn accesses the shared entity beans locally. The disadvantage of this approach is that I have to create some extra EJBs and that I cannot directly make use of container managed relationships etc from the client component.
3. I don't know if this is an option but I am wondering whether I can deploy a copy of each shared entity bean with each application component. The advantage of this approach is that the component would access the entity locally and could make use of container managed relationships. However, I don't know what the issues are with having more than one instance (per primary-key) of an entity in the same application. I don't know whether this would cause errors of whether they would get out of sync (because different instances with the same primary key would be updated by different clients). Initially each component would be deployed in the same server but later they would be deployed in different servers. In both cases with this option each component (JAR) would have copies of the shared entity bean classes.
Any suggestions as to the best approach and whether the last option is feasible would be much appreciated.
Thanks.

I think 2 beats 1. The main reason being to minimise the number of network calls. You're basically asking, are fascades a good idea? and the answer is yes.
You can obviously do 3 in different app servers. However you'll need to configure your app servers so they can handle the fact that they're not the only ones updating the database. This is to handle concurrency as you mentioned. How you do this will depend on your app server and will affect performance, but shouldn't be a problem.
I think you should definately decide up front what's going in different app servers, I dunno if 3 would work in the same app server.
Why do you would want to use multiple app servers?
Why not have everything in the same app?
Is is just the 1 database?
You can use clustering for scalability.

Import xml data in Access when multiple rows use the same fieldname

HI.
First of all sorry for my english :-) I have a LiveCycle Designer ES form with multiple rows that I send via e-mail as XML data.
example:
Row 1
Firstname: John Lastname: Dow
Row 2
Firstname: Steve Lastname: Austin
The exported XML is OK but when I want to import it into my Access database, only one row is imported. I pretty sure that the problem comes from the fact that may exported XML use the same fieldname (what is important if I want to import data in the correct Access field) but I don't know what to do to be able to import all the rows of the same Form.
Any idea?
Thanks a lot
Frederic

Hi Viktor,
In case of order recognition rules you should increase the relevancy in the newer version of the cartridge so appropriate ORR will be triggered. In other xqueries, you can try using new namespace as a model variable for each and every version of the cartridge
Regards,
JP

Splitting a message with multiple rows from the JDBC Adapter

Hi,
I'd like to split the resultset message with multiple row elements and process each row separately..
Does someone have this experience?
Thanx, Peter

Hi Chandrasekhar,
I tried to follow your advise, but I'm not able to complete the process correctly.
Let me explain my process:
First - output from the JDBC adapter goes into the first receive step. Of course, there are multiple ROW elements. (Should be marked the ingoing message marked in the container as Multiline??)
The next should be the transformation:
format of the source message is like
<message>
<row>
<column>w</column>
</row>
<row>
<column>w</column>
</row>
</message>
In the message I have the ROW element as 0..unbounded
and <column> element exactly 1
This message should be mapped to multiple messages of the format:
<message>
<value>w</value>
</message>
How should be the mapping be done?
Is it N:1 or 1:N (because in another thread there was an 1:N mapping advised)
Then (as you say) should follow the Block step:
Which message (container element) should be marked as Multiline? And what does it mean: Current Message?
Can you give me some advise, when and how to use the multiline mark?
Thanx a lot, Peter

Adding multiple rows to a cell?

Is it possible to add multiple rows of text to a single cell? I am trying to create a workout log. Typicaly I would record several exercises with weights and repititions to a single days workout. Is this possible in Numbers?
Suggestion?
Thanks.

Hi Dcneuro,
I am trying to create a workout log. Typicaly I would record several exercises with weights and repititions to a single days workout.
You can enter multiple lines of text in a cell... But I'm wondering why you would want to do that. A log would be more useful if you structure it like this, one exercise to a row and repeat the date where appropriate:
If you structure it that way or similarly (rather than entering multiple lines in a cell) then you can then use Numbers to do the things spreadsheet software is designed to do: derive summary statistics, charts, etc. The formulas in this summary table are:
B2, copied down: =COUNTIF(Log::B,A2)
C2, copied down: =SUMIF(Log::B,A2,Log::D)
D2, copied down: =AVERAGEIF(Log::B,A2,Log::D)
E2, copied down: =AVERAGEIF(Log::B,A2,Log::C)
Obviously these workout numbers make no sense. This is just a simple example to give you an idea of the kinds of things you can do if you structure your log properly.
Also, have a look at the Running Log template (File>New>Personal>Running Log on the Mac, or on the iPad: + then Create Spreadsheet then scroll down to the Personal section).
SG

Adding multiple rows or columns to a sheet

Hi There,
I'm new to this so pardon me please.......I've tried everything, I've looked everywhere..........does anyone know how to add in multiple rows or columns into the middle of a worksheet? There has to be a quicker way to throw in a quick 20 rows rather than just doing it one by one?????
Frustratingly yours
Morris

Hello
It seems that you missed a detail:
+1. Highlight the number of columns you want to add before or after your insertion point.+
+_2. Control click to get menu._+
+3. Select "Add Columns Before" or "Add columns After" - whichever is appropriate.+
without Control
with Control depressed
Yvan KOENIG (from FRANCE mercredi 6 février 2008 15:50:47)

BAPI_PO_CREATE1 not able to create PO's for multiple rows from the flat fil

Hi
i am uploading PO's from a flat file into SAP using the BAPI_PO_CREATE1. Everything works fine if the flat file hast only one record.
if the flat file has more than one record then while loading the second record the BAPI returns a error message. I am calling the BAPI in a loop.
The strange thing is that if i load the second record individually the program is able to create the PO. So only when i have multiple records in the flat file i am unable to load the PO into SAP. I debugged and checked all the internal tables passed to the BAPI. All seems to have the data correctly but still the BAPI fails.
any idea where i am going wrong?
the code looks something like this.
LOOP AT HEADER_ITAB.
   PERFORM FILL_HEADER_RECORDS.
LOOP AT ITEM_ITAB WHERE EBELN eq HEADER_ITAB-EBELN.
     PERFORM FILL_ITEM_RECORDS.
ENDLOOP.
PERFORM CERATE_PO_VIA_BAPI.
ENDLOOP.

What is the error message. Are you trying something like this:
    LOOP AT T_DATA1.
      AT NEW LIFNR.
        READ TABLE T_DATA1 INDEX SY-TABIX.
        PERFORM INIT_TABLES.
        PERFORM FILL_DATA.
--Call the BAPI to create PO
        PERFORM CREATE_PO.
      ENDAT.
    ENDLOOP.
FORM CREATE_PO .
CALL FUNCTION 'BAPI_PO_CREATE1'
    EXPORTING
      POHEADER                     =   POHEADER
      POHEADERX                    =   POHEADERX
    POADDRVENDOR                 =
    TESTRUN                      =
    MEMORY_UNCOMPLETE            =
    MEMORY_COMPLETE              =
    POEXPIMPHEADER               =
    POEXPIMPHEADERX              =
    VERSIONS                     =
    NO_MESSAGING                 =
    NO_MESSAGE_REQ               =
    NO_AUTHORITY                 =
    NO_PRICE_FROM_PO             =
   IMPORTING
     EXPPURCHASEORDER             = EXPPURCHASEORDER
     EXPHEADER                    = EXPHEADER
     EXPPOEXPIMPHEADER            = EXPPOEXPIMPHEADER
   TABLES
     RETURN                       = RETURN
     POITEM                       = POITEM
     POITEMX                      = POITEMX
    POADDRDELIVERY               =
     POSCHEDULE                   = POSCHEDULE
     POSCHEDULEX                  = POSCHEDULEX
     POACCOUNT                    = POACCOUNT
    POACCOUNTPROFITSEGMENT       =
     POACCOUNTX                   = POACCOUNTX
    POCONDHEADER                 =
    POCONDHEADERX                =
     POCOND                       = POCOND
     POCONDX                      = POCONDX
    POLIMITS                     =
    POCONTRACTLIMITS             =
    POSERVICES                   =
    POSRVACCESSVALUES            =
    POSERVICESTEXT               =
    EXTENSIONIN                  =
    EXTENSIONOUT                 =
    POEXPIMPITEM                 =
    POEXPIMPITEMX                =
    POTEXTHEADER                 =
      POTEXTITEM                   = POTEXTITEM
    ALLVERSIONS                  =
     POPARTNER                    = POPARTNER
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
    EXPORTING
      WAIT   = 'X'
    IMPORTING
      RETURN = RETURN1.
DATA: L_NAME TYPE LFA1-NAME1.
CLEAR L_NAME.
SELECT SINGLE NAME1
           FROM LFA1
           INTO L_NAME
           WHERE LIFNR = POHEADER-VENDOR.
LOOP AT RETURN.
    WRITE : / RETURN-TYPE,
              RETURN-ID,
              RETURN-MESSAGE.
    WRITE : '--> For vendor:',
             POHEADER-VENDOR,
             L_NAME.
ENDLOOP.
ENDFORM.                    " CREATE_PO

Exaprom PDF: how may cells span multiple rows in the table body?

I'm using Exaprom PDF but I have a case I just can't get to work.
I would like to generate a table where a cell spans on an entire row in the table body, the table should result as:
|__|__|__|__|
|__|__|__|__|
|___________|
|__|__|__|__|
Dear Jean-Marc,
could you post an example how to span a cell on an entire row in the table body with the function "Append Customized Table.vi."
For the example, please use the 2009 version.
Thanks,
Asper
This post refers to the Exaprom PDF report generation toolkit:
https://decibel.ni.com/content/docs/DOC-10952
Solved!
Go to Solution.

Maybe this.
Jean-Marc
LV2009 and LV2013
Free PDF Report with iTextSharp
Attachments:
Test Table Merge LV2009.vi ‏113 KB

Adding multiple rows to the HtmlDataTable in bean.

Similar Messages

Maybe you are looking for