Adding new infotype node in infoset

Hi All,
I want to add new standard infotype in my current infoset, how do I do that.
currently it is not in the existing nodes.(transaction sq02)
Regards,
kumar

Hi Kumar,
In tcode sq02 select the infoset.
Press the edit button.
When you see the infotypes in the left of the screen press Edit-Change Info Type Selection
There you can choose the infotype and add it.
After that you have to save and generate. Then you will be able to see the infotype in that infoset
Regards;
Okan
Edited by: Okan Caliskan on Sep 22, 2011 10:18 AM

Similar Messages

Question regarding adding new field to an infoset.

Hi all!
Actually i am not a programmer but HR functional, but i need to add an additional field to my infoset.
I wanted to do it myself without ABAPers help.
I have already added new field to an infoset and included a code:
TABLES HRP1000.
SELECT SINGLE short INTO ORG_UNIT_SHORT
FROM hrp1000 WHERE objid = p0001-orgeh.
And it almost works. The thing is, when on the report (sap query) a person have value '00000000' in the p0001-orgeh the report enters value into ORG_UNIT_SHORT from the previous record (of another employee).
How to avoid this? i suppose i have to assign this field an initial value at the begining of the code (how?).. or?? as i said i just try to make first steps in abap programming...

Ok, i have found a solution (clear statement)

Adding new server node in EP

HI All,
We need to add additional one server node to our existing EP server. Server is having total of 4GB ram and CPU ENT0.50
vmstat 5 5
System configuration: lcpu=4 mem=4096MB ent=0.50
Is there any calculation /thumb role of how much resource required in order to add a new server node.
Thanks
-Tom

Hi,
Check the below links as well... hope fully u will get the good information there.
How many server nodes can you create per instance
http://santy.wdfiles.com/local--files/web-dynpro/logon_page_branding.pdf
-Srini

Adding Custom Infotype to a Infoset

Hi,
I have created a Custom Infotype for OM with some custom fields.These fields need to be made available to the Infoset for Adhoc Query.
Any idea how this infotype can be added to the infoset?
or made available for Queries.
Thanks,
Vijay

Here are the steps that I followed:
Enter the transaction code PPCI
Enter a four digit infotype number (9nnn) and an infotype name.
Select Field Infotype
Choose Infotype Create.
Choose Check environment to maintain the required entry in table T777I (Infotypes per object type).
Choose the Entry 'T777I' under the list of 'Table Entries' (This list is produced when you choose 'Check' on the First screen of the Transaction PPCI.
Press the 'Change' button and you will be taken to the 'Maintain Table Views' Transaction (SM30).
Press the Maintain button.
From the list of Infotypes locate the custom infotype created and select the entry for that.
Click on the 'Time Constraint' folder appearing on the left hand corner of the screen.
The screen for Change View Time Constraint would appear.
In the object type field put in: O,P,S whatever is relevant to your requirement.Also add the time constraint.
Save it and double click on the 'Infotypes per object type' folder (on the left hand side again).
Create a new entry here for your infotype and save it.
Come back to the Transaction PPCI and you are all set.
This is all I did and it worked.
Thanks,
Vijay

Adding new node to the Clusterware fails with the root.sh script.

Dear All,
I had successfully added third node to the existing 2 node cluster. After adding new node I need to run the root.sh scripts, but it was faling with the below error.
Please help me with the below issue:
Instantiating scripts for add node (Monday, April 8, 2013 3:23:14 PM EDT)
. 1% Done.
Instantiation of add node scripts complete
Copying to remote nodes (Monday, April 8, 2013 3:23:16 PM EDT)
............................................................................................... 96% Done.
Home copied to new nodes
Saving inventory on nodes (Monday, April 8, 2013 3:31:40 PM EDT)
. 100% Done.
Save inventory complete
WARNING:
The following configuration scripts need to be executed as the "root" user in each new cluster node. Each script in the list below is followed by a list of nodes.
/u01/app/11.2.0/grid/root.sh #On nodes svphxwgdbprd06
To execute the configuration scripts:
1. Open a terminal window
2. Log in as "root"
3. Run the scripts in each cluster node
The Cluster Node Addition of /u01/app/11.2.0/grid was successful.
Root.SH Script Log:
[root@svphxwgdbprd06 ~]# /u01/app/11.2.0/grid/root.sh
Performing root user operation for Oracle 11g
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /u01/app/11.2.0/grid
Enter the full pathname of the local bin directory: [usr/local/bin]:
The contents of "dbhome" have not changed. No need to overwrite.
The contents of "oraenv" have not changed. No need to overwrite.
The contents of "coraenv" have not changed. No need to overwrite.
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.
Using configuration parameter file: /u01/app/11.2.0/grid/crs/install/crsconfig_params
Creating trace directory
User ignored Prerequisites during installation
OLR initialization - successful
Adding Clusterware entries to inittab
CRS-2672: Attempting to start 'ora.mdnsd' on 'svphxwgdbprd06'
CRS-2676: Start of 'ora.mdnsd' on 'svphxwgdbprd06' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'svphxwgdbprd06'
CRS-2676: Start of 'ora.gpnpd' on 'svphxwgdbprd06' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'svphxwgdbprd06'
CRS-2672: Attempting to start 'ora.gipcd' on 'svphxwgdbprd06'
CRS-2676: Start of 'ora.cssdmonitor' on 'svphxwgdbprd06' succeeded
CRS-2676: Start of 'ora.gipcd' on 'svphxwgdbprd06' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'svphxwgdbprd06'
CRS-2672: Attempting to start 'ora.diskmon' on 'svphxwgdbprd06'
CRS-2676: Start of 'ora.diskmon' on 'svphxwgdbprd06' succeeded
CRS-2676: Start of 'ora.cssd' on 'svphxwgdbprd06' succeeded
ASM created and started successfully.
Disk Group DATA created successfully.
clscfg: -install mode specified
clscfg: EXISTING configuration version 5 detected.
clscfg: version 5 is 11g Release 2.
Successfully accumulated necessary OCR keys.
clscfg: Arguments check out successfully.
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Failed to initialize Oracle Cluster Registry for cluster, rc 105
Oracle Grid Infrastructure Repository configuration failed at /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm line 6818.

The document references posted already are very good ones. However, I would say that on personal experience (on Solaris and 10gR2) that the addnode tools gave me nothing but problems. Luckily, I was able to build a parallel cluster (with three nodes) on other hardware and then move the databases across via DataGuard. It was quicker and cleaner (and easier!) that way...
Good luck!

Adding new Node in 10gR2(10.2.0.4) in AIX

Hi Experts,
i need your guidence actually we are planning to add new node in our exsisting two node RAC. i need a dacument or refrence links that can guide me in adding new node.
your help will be very helpfull for me.thanx in advance
regards,

Hi,
you can drive some tests using following docs:
http://www.smaliz.com/notes/10g-AddNode-RAC-ASM-AIX.pdf
http://blogs.oracle.com/AlejandroVargas/gems/RAC10gR2AddNode.pdf
Or refer to the RAC admin books that you can find on http://tahiti.oracle.com/
HTH,
Thierry

Adding new fields in Custom Infotype

Hi,
I need to change some fields of Custom Infotype. But project is already gone live for 1 country. will making changes to infotype affect for existing live country?
Safe side....We are thinking Adding new fields in Custom Infotype. & displaying corresponding fields for countries in another tab
& hiding the old tab.
Please let me know procedure for Adding new fields in Custom Infotype for displaying in new tab.
Edited by: Sachin Thigale on Aug 23, 2010 7:04 PM
Edited by: Sachin Thigale on Aug 23, 2010 7:05 PM

Please search. Lot of Threads on this.
Follow these steps.
Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the u2018Employee Infotypeu2019 radio button.
4) Select the u2018PS Structure Infotypeu2019.
5) Click on Createu2026 A separate table maintenance window appearsu2026
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on u2018Allu2019 push button. It takes a few moments.
10) Click on u2018Technical Characteristicsu2019. Infotype list screen appears
11) Click on u2018Changeu2019(pencil) button
12) Select your Infotype and click on u2018Detailu2019 (magnifying glass) button
13) Give u2018T591Au2019 as subtype table
14) Give u2018T591Su2019 as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on u2018Infotype Characteristicsu2019 u2026 Infotype list screen appears
18) Click on u2018Changeu2019 (pencil) button
19) Click on u2018New Entriesu2019
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotypeu2019s infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirementu2026
25) In the PM01 initial screenu2026Select u2018Screenu2019 radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select u2018Layout Editoru2019 and click u2018Changeu2019.
27) Screen default layout appearsu2026here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Donu2019t forget to u2018Activate at every level
i think u have to select CI_INCLUDE while enhanceing the Standrad Infotype
The above details are from the following link
Re: How to add fields in custom infotype and update its screens

AHQ/Russia specific education infotype to my infoset

Hello Techies,
I want to add Russia specific education infotype to my infoset for add hoc query
Now when I add education infotype via tcode sq02 , I cant see the Russia specific fields over there
Like Profession (OKSO) PROFESSION
Education (OKIN) EDUCATION
Post education (OKIN) SKILL
I have to take those fields from addon table PRU_EDUCATION
Will you please tell me how to add table to the infoset ?
As I want this to be added in my infoset
Thanks and Regards
Jaydeep Jadhav

Hi Jaydeep!
The best way for you is to add additional structure PRU_EDUCATION to IT0022 node within your infoset.
To fill the structure fields you have to write a simple ABAP code.
As the reference for your coding, please use the following SAP modules which are located on 2033 screen:
module p0022_ru_pbo.
module p0022_ru_get_names.
Best,
Sergey

Urgent :crm_ic web client adding new field - customer external number-BPEXT

HI
I want to add the field customer external number(data element- bpext) is available as a standard field in bp transaction , under indentification tab I am trying to bring the same field into the identify account-CRM-IC BSP Application
when I am trying to do this , I nee to know the below information
Attribute name
property name
context class
can you help me in Identifying this values which I feel is must for adding the field to the bsp application CRM_IC.
thanks in advance
Message was edited by: madhu satya rajasekhar bobbadi

Hi,
Following are the steps to add new fields to the existing view.
- Create a new controller class (ZCL..) with original view class as super class
- Create new BSP application with View and Controller
- Attach the above Z class to the view and controller created and activate the BSP appln.
- Go to transaction BSP_WD_WORKBENCH and type your BSP appln.
- Expand your controller and at the Context class use Wizard to create new context node and bind this to Custom Controller class available.
This whole process requires complte understanding of View, Controller, Custom controller and basic custom modifications to IC Web Frame work.
Kunda Krishna Kishore

Creating new Infotype

I created a new infotype 9015. It works and posts correctly. Then I tried adding a module within the 9015 code to generate an infotype 0014. So the end result should be a 9015 and a 0014 record.   While Im in PA30 I can see the expected results but if I leave PA30 and come back in the records are gone. Looks like some type of commit issue but I have tried adding code to COMMIT and it doesnt help.
Here is the additional IT0014 code.
    move GV_RETIRE-wage_type_ee to gt_pa0014-SUBTY.
    move GV_RETIRE-wage_type_ee to gt_pa0014-LGART.
    move GV_RETIRE-ee_percent to gt_pa0014-ANZHL.
    move p9015-endda to gt_pa0014-endda.
    move p9015-begda to gt_pa0014-begda.
    move p9015-pernr to gt_pa0014-pernr.
    move '0014' to gt_pa0014-INFTY.
    Append gt_pa0014.
    CALL FUNCTION 'HR_EMPLOYEE_ENQUEUE'
      EXPORTING
        NUMBER = p9015-pernr
      IMPORTING
        RETURN = gt_return.
   CALL FUNCTION 'BAPI_EMPLOYEET_ENQUEUE'
     EXPORTING
       NUMBER              = p9015-pernr
       VALIDITYBEGIN       = p9015-begda
    IMPORTING
      RETURN              = gt_return.
    CALL FUNCTION 'HR_INFOTYPE_OPERATION'
      EXPORTING
        infty         = gt_pa0014-INFTY
        number        = gt_pa0014-pernr
        subtype       = gt_pa0014-subty
        validityend   = gt_pa0014-endda
        validitybegin = gt_pa0014-begda
        record        = gt_pa0014
        operation     = 'INS'
        tclas         = 'A'
        dialog_mode   = '0'
        nocommit      = ''
      IMPORTING
        return        = lstr_bapireturn
        key           = lstr_bapikey.
    IF NOT lstr_bapireturn-number = 0.
      lv_bapierror = lstr_bapireturn-message.
      lv_failed = abap_true.
    ENDIF.
       CALL FUNCTION 'BAPI_EMPLOYEET_DEQUEUE'
     EXPORTING
       NUMBER              = p9015-pernr
       VALIDITYBEGIN       = p9015-begda
    IMPORTING
      RETURN              = gt_return.
    CALL FUNCTION 'HR_EMPLOYEE_DEQUEUE'
      EXPORTING
        NUMBER = p9015-pernr
      IMPORTING
        RETURN = gt_return.
    CALL FUNCTION 'RH_UPDATE_DATABASE'
      EXPORTING
        VTASK = 'V'.
    commit work.

You can try to split the update tasks ie Put the 0014 logic inside a custom function module.. make sure to set the 'Update Module' Processing Type in its Attributes. & then call this custom function IN UPDATE TASK fom 9015.
~Suresh

Adding new database to RAC.

Instance not starting after adding new database to RAC.
CRS-0215: Could not start resource 'xxxxxxxxx.inst'.
PRKP-1001 : Error starting instance db on node host

Hi,
Can you check the tnsnames.ora for this iinstance on the node where you are trying to add the instance.
ex:
LISTENERS_MYRAC =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = inst1-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = inst2-vip)(PORT = 1521))
Regards,
vasu

Open Enrollment Form, adding new coverage level

Hi All
We have recently added Domestic partner level as an option in our Health Insurance Plans. I believe I have correctly added the new plans etc because they are showing up on the open enrollment form. The problem is the new plan is only showing up with the old coverage options (i.e. single, ee & spouse, family etc) and is missing the new Domestic Partner and Spouse coverage option that I added. Please advise on how to get it to show up on the form.
Thanks in advance

Hi Ken,
What i understand is... you have done the following
Health Plans: IMG ->Personal Management->Benefits- >Plans->Health Plans
1. You have setup the config in Define Health Plan General Data.
2. IMG >> Personal Management->Benefits- >Plans->Health Plans->Define Dependent Coverage Options
Set up your Domestic Partner option here i.e. E+DP (Min: 1 / Max: 1)
3. Setup the Cost Variants in the node IMG->Personal Management->Benefits- >Plans->Health Plans->Define Cost Variant
4. Setup the Cost Rules in the node IMG->Personal Management->Benefits- >Plans->Health Plans->Define Cost Rule
5. Assign the health plan attriubtes in the node IMG >>Personal Management->Benefits- >Plans->Health Plans->Assign Health Plan Attributes. I guess this is what you missed.
One question here......are you using Adjustment reasons for adding new coverage???
Kumarpal Jain.

Full server pool crashes when adding new iSCSI server

Hi,
we have a Pool Group with 2 machines (1 Server Pool Master + Server Virtual Machine + Utility Server and another 1 Server Virtual Machine). Both have a iSCSI Shared Disk which builds /OVS partition.
This is working, we can use High Availability, Migrate guests etc.
But when adding new Server Virtual Machines to the pool (with guests running), current machines in the Pools get restarted.
My question is, can server virtual machines be "hot added" to the pool group while guests are running?
Thanks and regards,
Marc

Hi,
hosts file seems to be correct.
Messages logs during the crash time are the following:
Node vmserver15 = Server Pool Master, Utility Master and Server Virtual Machine
Dec 10 12:40:02 vmserver15 kernel: vlan500: port 3(vif6.0) entering disabled state
Dec 10 12:40:02 vmserver15 kernel: device vif6.0 left promiscuous mode
Dec 10 12:40:02 vmserver15 kernel: type=1700 audit(1260445202.434:16): dev=vif6.0 prom=0 old_prom=256 auid=4294967295 ses=4294967295
Dec 10 12:40:02 vmserver15 kernel: vlan500: port 3(vif6.0) entering disabled state
Dec 10 12:40:02 vmserver15 kernel: loop10: dropped 10114 extents
Dec 10 12:40:03 vmserver15 udhcpc: udhcp client (v0.9.8) started
Dec 10 12:40:03 vmserver15 udhcpc: Lease of 193.109.175.25 obtained, lease time 172800
Dec 10 12:40:04 vmserver15 kernel: device vif7.0 entered promiscuous mode
Dec 10 12:40:04 vmserver15 kernel: type=1700 audit(1260445204.774:17): dev=vif7.0 prom=256 old_prom=0 auid=4294967295 ses=4294967295
Dec 10 12:40:04 vmserver15 kernel: vlan500: topology change detected, propagating
Dec 10 12:40:04 vmserver15 kernel: vlan500: port 3(vif7.0) entering forwarding state
Dec 10 12:40:05 vmserver15 kernel: loop10: fast redirect
Dec 10 12:40:06 vmserver15 kernel: blkback: ring-ref 770, event-channel 9, protocol 1 (x86_32-abi)
Dec 10 12:53:35 vmserver15 kernel: o2net: no longer connected to node vmserver10.pic.es (num 1) at 193.109.174.110:7777
Dec 10 12:53:36 vmserver15 kernel: (4989,0):o2hb_do_disk_heartbeat:776 ERROR: Device "sdb1": another node is heartbeating in our slot!
Dec 10 12:53:37 vmserver15 kernel: o2net: accepted connection from node vmserver10.pic.es (num 1) at 193.109.174.110:7777
Dec 10 12:53:38 vmserver15 kernel: (4989,0):o2hb_do_disk_heartbeat:776 ERROR: Device "sdb1": another node is heartbeating in our slot!
Dec 10 12:53:50 vmserver15 last message repeated 6 times
Dec 10 12:53:51 vmserver15 kernel: o2net: no longer connected to node vmserver10.pic.es (num 1) at 193.109.174.110:7777
Dec 10 12:53:52 vmserver15 kernel: (4989,0):o2hb_do_disk_heartbeat:776 ERROR: Device "sdb1": another node is heartbeating in our slot!
Dec 10 12:53:53 vmserver15 kernel: o2net: accepted connection from node vmserver10.pic.es (num 1) at 193.109.174.110:7777
Dec 10 12:53:53 vmserver15 kernel: (5638,0):dlm_send_remote_convert_request:393 ERROR: dlm status = DLM_IVLOCKID+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):dlmconvert_remote:327 ERROR: dlm status = DLM_IVLOCKID+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):ocfs2_cluster_lock:1206 ERROR: DLM error DLM_IVLOCKID while calling dlmlock on resource M000000000000000001050c00000000: bad lockid+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):ocfs2_inode_lock_full:2064 ERROR: status = -22+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):ocfs2_inode_lock_atime:2193 ERROR: status = -22+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):__ocfs2_file_aio_read:2434 ERROR: status = -22+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):dlm_send_remote_convert_request:393 ERROR: dlm status = DLM_IVLOCKID+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):dlmconvert_remote:327 ERROR: dlm status = DLM_IVLOCKID+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):ocfs2_cluster_lock:1206 ERROR: DLM error DLM_IVLOCKID while calling dlmlock on resource M000000000000000001050c00000000: bad lockid+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):ocfs2_inode_lock_full:2064 ERROR: status = -22+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):ocfs2_write_begin:1845 ERROR: status = -22+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):ocfs2_file_buffered_write:2016 ERROR: status = -22+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):__ocfs2_file_aio_write:2173 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):dlm_send_remote_convert_request:393 ERROR: dlm status = DLM_IVLOCKID+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):dlmconvert_remote:327 ERROR: dlm status = DLM_IVLOCKID+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_cluster_lock:1206 ERROR: DLM error DLM_IVLOCKID while calling dlmlock on resource M000000000000000000020744c1370e: bad lockid+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_inode_lock_full:2064 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_reserve_suballoc_bits:449 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_reserve_cluster_bitmap_bits:682 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_local_alloc_reserve_for_window:930 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_local_alloc_slide_window:1063 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_reserve_local_alloc_bits:537 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):__ocfs2_reserve_clusters:725 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_lock_allocators:677 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_write_begin_nolock:1751 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_write_begin:1861 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_file_buffered_write:2016 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):__ocfs2_file_aio_write:2173 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: loop: Write error at byte offset 37644512256, length 4096.+
. <the above bold and cursive text is repetead few times>
Dec 10 12:58:29 vmserver15 kernel: (5638,3):dlmconvert_remote:327 ERROR: dlm status = DLM_IVLOCKID
Dec 10 12:58:29 vmserver15 kernel: (5638,3):ocfs2_cluster_lock:1206 ERROR: DLM error DLM_IVLOCKID while calling dlmlock on resource M000000000000000001050c00000000: bad lockid
Dec 10 12:58:29 vmserver15 kernel: (5638,3):ocfs2_inode_lock_full:2064 ERROR: status = -22
Dec 10 12:58:29 vmserver15 kernel: (5638,3):ocfs2_write_begin:1845 ERROR: status = -22
Dec 10 12:58:29 vmserver15 kernel: (5638,3):ocfs2_file_buffered_write:2016 ERROR: status = -22
Dec 10 12:58:29 vmserver15 kernel: (5638,3):__ocfs2_file_aio_write:2173 ERROR: status = -22
Dec 10 13:01:16 vmserver15 syslogd 1.4.1: restart.
Node vmserver10: Virtual Server Machine
Dec 10 12:53:35 vmserver10 kernel: o2net: no longer connected to node vmserver15.pic.es (num 0) at 193.109.174.115:7777
Dec 10 12:53:35 vmserver10 kernel: (5029,0):ocfs2_dlm_eviction_cb:98 device (8,17): dlm has evicted node 0
Dec 10 12:53:35 vmserver10 kernel: (20996,0):dlm_get_lock_resource:844 E3FE9E5767CA457FA697980EB637E93B:M000000000000000000022044c1370e: at least one node (0) to recover before lock mastery can begin
Dec 10 12:53:36 vmserver10 kernel: (5344,4):dlm_get_lock_resource:844 E3FE9E5767CA457FA697980EB637E93B:$RECOVERY: at least one node (0) to recover before lock mastery can begin
Dec 10 12:53:36 vmserver10 kernel: (5344,4):dlm_get_lock_resource:878 E3FE9E5767CA457FA697980EB637E93B: recovery map is not empty, but must master $RECOVERY lock now
Dec 10 12:53:36 vmserver10 kernel: (5344,4):dlm_do_recovery:524 (5344) Node 1 is the Recovery Master for the Dead Node 0 for Domain E3FE9E5767CA457FA697980EB637E93B
Dec 10 12:53:36 vmserver10 kernel: (20996,0):ocfs2_replay_journal:1183 Recovering node 0 from slot 0 on device (8,17)
Dec 10 12:53:37 vmserver10 kernel: o2net: connected to node vmserver15.pic.es (num 0) at 193.109.174.115:7777
Dec 10 12:53:38 vmserver10 kernel: (8672,1):dlm_get_lock_resource:844 ovm:$RECOVERY: at least one node (0) to recover before lock mastery can begin
Dec 10 12:53:38 vmserver10 kernel: (8672,1):dlm_get_lock_resource:878 ovm: recovery map is not empty, but must master $RECOVERY lock now
Dec 10 12:53:38 vmserver10 kernel: (8672,1):dlm_do_recovery:524 (8672) Node 1 is the Recovery Master for the Dead Node 0 for Domain ovm
Dec 10 12:53:40 vmserver10 kernel: kjournald starting. Commit interval 5 seconds
Dec 10 12:53:51 vmserver10 kernel: o2net: no longer connected to node vmserver15.pic.es (num 0) at 193.109.174.115:7777
Dec 10 12:53:53 vmserver10 kernel: o2net: connected to node vmserver15.pic.es (num 0) at 193.109.174.115:7777
Dec 10 12:53:53 vmserver10 kernel: (3761,0):dlm_convert_lock_handler:489 ERROR: did not find lock to convert on grant queue! cookie=0:92+
Dec 10 12:53:53 vmserver10 kernel: lockres: M000000000000000001050c0000000, owner=1, state=0+
Dec 10 12:53:53 vmserver10 kernel: last used: 0, refcnt: 3, on purge list: no+
Dec 10 12:53:53 vmserver10 kernel: on dirty list: no, on reco list: no, migrating pending: no+
Dec 10 12:53:53 vmserver10 kernel: inflight locks: 0, asts reserved: 0+
*Dec 10 12:53:53 vmserver10 kernel: refmap nodes: [ ], inflight=0*+
Dec 10 12:53:53 vmserver10 kernel: granted queue:+
Dec 10 12:53:53 vmserver10 kernel: type=5, conv=-1, node=1, cookie=1:243, ref=2, ast=(empty=y,pend=n), bast=(empty=y,pend=n), pending=(conv=n,lock=n,cancel=n,unlock=n)+
Dec 10 12:53:53 vmserver10 kernel: converting queue:+
Dec 10 12:53:53 vmserver10 kernel: blocked queue:+
. <the above bold and cursive text is repetead few times>
Dec 10 12:57:18 vmserver10 modprobe: FATAL: Module ocfs2_stackglue not found.
Dec 10 12:57:18 vmserver10 kernel: (3761,0):dlm_convert_lock_handler:489 ERROR: did not find lock to convert on grant queue! cookie=0:92+
Dec 10 12:57:18 vmserver10 kernel: lockres: M000000000000000001050c0000000, owner=1, state=0+
Dec 10 12:57:18 vmserver10 kernel: last used: 0, refcnt: 3, on purge list: no+
Dec 10 12:57:18 vmserver10 kernel: on dirty list: no, on reco list: no, migrating pending: no+
Dec 10 12:57:18 vmserver10 kernel: inflight locks: 0, asts reserved: 0+
*Dec 10 12:57:18 vmserver10 kernel: refmap nodes: [ ], inflight=0*+
Dec 10 12:57:18 vmserver10 kernel: granted queue:+
Dec 10 12:57:18 vmserver10 kernel: type=5, conv=-1, node=1, cookie=1:243, ref=2, ast=(empty=y,pend=n), bast=(empty=y,pend=n), pending=(conv=n,lock=n,cancel=n,unlock=n)+
Dec 10 12:57:18 vmserver10 kernel: converting queue:+
Dec 10 12:57:18 vmserver10 kernel: blocked queue:+
. <the above bold and cursive text is repetead few times>
Dec 10 12:58:32 vmserver10 kernel: (3761,0):dlm_unlock_lock_handler:511 ERROR: failed to find lock to unlock! cookie=0:1849
Dec 10 12:58:33 vmserver10 modprobe: FATAL: Module ocfs2_stackglue not found.
Dec 10 12:59:02 vmserver10 kernel: o2net: connection to node vmserver15.pic.es (num 0) at 193.109.174.115:7777 has been idle for 30.0 seconds, shutting it down.
Dec 10 12:59:02 vmserver10 kernel: (0,0):o2net_idle_timer:1503 here are some times that might help debug the situation: (tmr 1260446312.830107 now 1260446342.828243 dr 1260446312.830066 adv 1260446312.830319:1260446312.830320 func (b9f5fd13:506) 1260446312.830109:1260446312.830303)
Dec 10 12:59:02 vmserver10 kernel: o2net: no longer connected to node vmserver15.pic.es (num 0) at 193.109.174.115:7777
Dec 10 12:59:32 vmserver10 kernel: (3761,0):o2net_connect_expired:1664 ERROR: no connection established with node 0 after 30.0 seconds, giving up and returning errors.
Dec 10 13:01:42 vmserver10 kernel: o2net: connected to node vmserver15.pic.es (num 0) at 193.109.174.115:7777
Dec 10 13:01:45 vmserver10 kernel: ocfs2_dlm: Node 0 joins domain E3FE9E5767CA457FA697980EB637E93B
Dec 10 13:01:45 vmserver10 kernel: ocfs2_dlm: Nodes in domain ("E3FE9E5767CA457FA697980EB637E93B"): 0 1
Dec 10 13:01:51 vmserver10 kernel: o2net: accepted connection from node vmserver16.pic.es (num 2) at 193.109.174.116:7777
Dec 10 13:01:56 vmserver10 kernel: ocfs2_dlm: Node 2 joins domain E3FE9E5767CA457FA697980EB637E93B
Dec 10 13:01:56 vmserver10 kernel: ocfs2_dlm: Nodes in domain ("E3FE9E5767CA457FA697980EB637E93B"): 0 1 2
Dec 10 13:09:05 vmserver10 modprobe: FATAL: Module ocfs2_stackglue not found.
Dec 10 13:16:45 vmserver10 kernel: o2net: connection to node vmserver16.pic.es (num 2) at 193.109.174.116:7777 has been idle for 30.0 seconds, shutting it down.
Dec 10 13:16:45 vmserver10 kernel: (0,0):o2net_idle_timer:1503 here are some times that might help debug the situation: (tmr 1260447375.655426 now 1260447405.655712 dr 1260447375.655413 adv 1260447375.655427:1260447375.655427 func (b9f5fd13:503) 1260446516.75600:1260446516.75608)
Dec 10 13:16:45 vmserver10 kernel: o2net: no longer connected to node vmserver16.pic.es (num 2) at 193.109.174.116:7777
Dec 10 13:17:15 vmserver10 kernel: (3761,0):o2net_connect_expired:1664 ERROR: no connection established with node 2 after 30.0 seconds, giving up and returning errors.
Dec 10 13:17:19 vmserver10 kernel: (5029,0):ocfs2_dlm_eviction_cb:98 device (8,17): dlm has evicted node 2
Dec 10 13:17:20 vmserver10 kernel: (3761,0):ocfs2_dlm_eviction_cb:98 device (8,17): dlm has evicted node 2
Dec 10 13:29:05 vmserver10 kernel: o2net: no longer connected to node vmserver15.pic.es (num 0) at 193.109.174.115:7777
Dec 10 13:29:05 vmserver10 kernel: (5029,0):ocfs2_dlm_eviction_cb:98 device (8,17): dlm has evicted node 0
Dec 10 13:29:06 vmserver10 kernel: (5344,4):dlm_get_lock_resource:844 E3FE9E5767CA457FA697980EB637E93B:$RECOVERY: at least one node (0) to recover before lock mastery can begin
Dec 10 13:29:06 vmserver10 kernel: (5344,4):dlm_get_lock_resource:878 E3FE9E5767CA457FA697980EB637E93B: recovery map is not empty, but must master $RECOVERY lock now
Dec 10 13:29:06 vmserver10 kernel: (5344,4):dlm_do_recovery:524 (5344) Node 1 is the Recovery Master for the Dead Node 0 for Domain E3FE9E5767CA457FA697980EB637E93B
Dec 10 13:29:06 vmserver10 kernel: (28412,0):ocfs2_replay_journal:1183 Recovering node 0 from slot 0 on device (8,17)
Dec 10 13:29:09 vmserver10 kernel: kjournald starting. Commit interval 5 seconds
Dec 10 13:29:16 vmserver10 kernel: o2net: accepted connection from node vmserver16.pic.es (num 2) at 193.109.174.116:7777
Dec 10 13:29:20 vmserver10 kernel: ocfs2_dlm: Node 2 joins domain E3FE9E5767CA457FA697980EB637E93B
Dec 10 13:29:20 vmserver10 kernel: ocfs2_dlm: Nodes in domain ("E3FE9E5767CA457FA697980EB637E93B"): 1 2
Dec 10 13:32:08 vmserver10 kernel: o2net: connected to node vmserver15.pic.es (num 0) at 193.109.174.115:7777
Dec 10 13:32:11 vmserver10 kernel: ocfs2_dlm: Node 0 joins domain E3FE9E5767CA457FA697980EB637E93B
Dec 10 13:32:11 vmserver10 kernel: ocfs2_dlm: Nodes in domain ("E3FE9E5767CA457FA697980EB637E93B"): 0 1 2
Dec 10 13:36:10 vmserver10 shutdown[28681]: shutting down for system reboot+
I will investigate what seems to be going on and post it here.
Thanks for your help.
Edited by: Marc Caubet on 11-Dec-2009 02:05
Edited by: Marc Caubet on 11-Dec-2009 02:07

Organization Model : Adding new relationships

Hi friends,
 Organization Model : Adding new relationships to the existing list while assigning agents to a position 
Using transaction PPOMW, after creating an organization unit we assign a position to it.
When we right click the Position and select assign from the context menu, a dialog box appears where we have to choose relationships.
Can we create and add new relationships to this list. say for e.g. Position: holder Site
Please help.
Jon

Jon,
This is definitely possible. I had a similar reqt where a new relationship Position: Holder Location was required.
Here's how to go about it.
1. We have to maintain the required entry in the table T77AR
This can be done through Transaction Code: SM30 or OOVK
Enter the table name T77AR and click Maintain button
2. Select Relationship 008: Holder from the table
Double Click on Relationship Characteristics from the frame on the Left Hand side. Here two entries are maintained.
The details of each of the above columns are given below.
A/B: Contains a code that represents a particular type of a relationship. there are two types, active(A) and passive(B) (reciprocal).
The two types exist since most relationships have two corresponding sides, or perspectives. For example, consider the relationship between a father and son. There is only one relationship, but there are two distinct perspectives to that relationship.
NOTE: Active and passive should not be assumed to mean superior and subordinate. Sometimes one side of a relationship does have a superior standing. However, it is also possible that both sides of a relationship have equal, and corresponding, standing. It is also possible that some relationships will be one-sided. This occurs when, for example, you create relationships with external objects.
Relationship: Contains a code that represents the relationship between two objects.
100% Check: You can specify in this field whether the 100% limit should be checked when percentages are entered for weighted relationships (infotype 1001).
The value entered in this field will determine the type of message that is issued if the 100% limit is exceeded when a relationship is created.
You can choose between the following values:
'E' = error
'I' = information
'W' = warning
' ' = no check is carried out
Check Work Schedule: You can use this field to control how the system is to treat relationships to persons in connection with the infotype "Work Schedule" (1011).
Check obsolete: This field controls the system reaction when relationships are entered or changed in connection with the infotype "Obsolete - 1014".
3. Now double click on the Allowed Relationships button from the frame on the left hand side.
Here we maintain a new entry Site.
Object: S
Object type text: Position
A/B: A
Rel: 008
Relationship Name: Holder
RelObjType: F (Site)
4. This entry now appears in the dialog box
 R&D is the name of the game 
Julius

New context node doesn't appear

Hi,
I added a new context node using 'Create node' wizard into the ICCMP_BP_DETAIL component for the view ICCMP_BP_DETAIL/BuPaCreate for add to the BP creation the tax number information.
When I access vía tcode BSP_WD_CMPWB to the view and go to the configuration, the node appears. But when we access to the configuration of the view via Ic Webclient the context node not appears, and it`s not possible to add the field.
If the field is assigned vía tcode BSP_WD_CMPWB to the view, when we access vía IC Web Client to the view return a short dump.
The GEt SET methods are also created on the new field but i can't see this field in UI config. I need to use this new field in RESULT list. I have tried using 'Assign to design layer' but it didn't work.
What could be the problem?

Hi David,
You want to add one field right. if this is the case why your creating context node. instead of that create one value attribute under any context node. any how that context node is visible in config level and that field too. you can use that field in your config.
go through the below doc in that step 1 will explain how to add value attribute under context node.
http://scn.sap.com/docs/DOC-54345
Thanks & Regards,
Srinivas.

Adding new infotype node in infoset

Similar Messages

Maybe you are looking for