Adding New table to the existing page

Hi,
i have a task i.e i have to create a new UI(consista table structure) and add to the existing page.How can do this one.If any one knows please respond asap.
This is urgent requirement.
Thanks in advance.
Bye
Palakondaiah

Similar Messages

How to add a new tables in the existing Pricing Report

Hi,
I have created Z2 list report in the pricing report (V/LD) with some tables and field names.
Now I got one requirement that i have to Add some more tables and filed names in the List Report Z2 in the pricing report.
Could anyone helpme out how can i add tables and fileds names to the existing list report in the Pricing report
Thanks for your support
Best Regards
Amjathpasha

hi, Pasha:
May i know how to solve this problem? as i also met this kind of problem.
and i tried V/lb, do not find the place to add the table.
Thanks,
Linda

Adding new files to the existing Keyword Collections

Hi,
I have been using Keyword Collections as folders when importing files - not sure if there is a "normal" way of creating folders for clips/audio/other files?
Anyway, when I start a project and import a folder with a few files, I create Keyword Collection. Later on, when I add more files into that folder in Finder and try to import the same folder as keyword collection again, the "new" files will not be assigned with that keyword collection. They're thrown straight into the event and the keyword collection only shows files from the first import.
In other words, having a Keyword Collection created when importing a folder - is there a way to assign more files to it later on? Sorry if it's a stupid question.
Thanks,
Kamil

YYou can drag them into the keyword collection once you've imported them. Another simple way is to pick up the files in the Finder, use Cmd-tab to switch to FCP, and drag them directly to the collection. The clips will import using your import preference.

Which is better a new schema or adding tables in the existing schema

Hi All,
We have a new requirement from the client asking us to include a few new functionalities(pages--- all together a new application has to be embedded into our application) in our application. By adding these new functionalities, the number of hits to our application can be doubled.
As per the above requirement, I would like to know that whether to create a new schema or to create some new tables in the existing database for the new functionalities.
By what way, can I handle the number of requests in a better way? by creating the new schema or by creating the new tables for the new functionalities.
Also I would like like to know what kind of factors will differ between creating a new schema or creating new tables for the new functionalities in the existing schema.
FYI... We are using Cold Fusion as front-end and Oracle 9i for back-end

I agree with VD in that it all depends on how closely the new features ties into your existing application structure.
The second major factor to consider is since you mention "for client" is if your application has more than one client and if you will be rolliong this feature into the application for all clients. If you have multiple clients but only this one gets this feature then it may make more sense to use a second schema, but it really depends on how easy to identify and separate this feature's objects for the purpose of maintaining it through future upgrades is going to be.
HTH -- Mark D Powell --

When I add a new bookmark, and the (star) Page Bookmarked window appears - is there any way to expand the size of that window so that I can see my entire list of folders when adding a new bookmark to an existing folder?

When I add a new bookmark, and the (star) Page Bookmarked window appears - is there any way to expand the size of that window so that I can see my entire list of folders when adding a new bookmark to an existing folder? The endless scrolling technique is far too tedious when trying to add a new bookmark, because the window is simply too tiny. Is there maybe a plug-in that will let me grab the corner of that window and re-size it? Thanks!

I suggest you install the "Add Bookmark to Here2" extension, then you can expand the the list but you will not see the bookmark itself in the list if that is what you wanted. At the top you have three major folders you can select one of them and scroll up and down. Below that you have your most recently used folders and you can select one of them instead and scroll up and down. You can see the folder the bookmark is in -- they get added to the bottom
If you really want to see the bookmark within the folder the same extension allows you to bring the bookmark to the folder from say the bookmarks sidebar that is why it is named as such. I use it but mainly i use the dialog.
Please continue reading about bookmarks and some related extensions at
* http://kb.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox
* https://addons.mozilla.org/firefox/addon/add-bookmark-here-2/
* http://dmcritchie.mvps.org/firefox/firefox.htm#addbookmarkhere2
* http://dmcritchie.mvps.org/firefox/kws.htm
If you are not using tags at all, you can remove a whole lot of confusion by removing them from the dialog via the extension.

Adding new elements to a Master Page and sharing them to existing pages

I need to include new navigation elements on the master page
and I want it to show up on pages I've already created. I've added
the new elements on a layer of their own which is part of the
master page, but the Share Layer to Pages... option is dimmed.

jcbluesman wrote:
> I'm using CS4, Jim, and here's a link to the .png
> (
http://idisk.mac.com/jconstant-Public/deimos.png
>
> The 3 tabs in the upper right on the master page are the
ones I'm trying to
> share across the existing pages. I created them in PS
(also CS4), then imported
> the .psd into this FW document, if that makes any
difference.
>
> Thanks,
> Jim
>
OK there are two related as I see it.
Each of your pages consists of a solid, opaque bitmap for a
main image.
Master Pages, by default, are at the bottom of the layer
stack. Your
tabs ARE present, you just can't see them because they are
covered up by
the bitmap.
Assuming you don't have those page images as multi-object
elements,
where you can edit the blue backgrounds, there are still two
things you
can do, both of which are pretty easy.
Go into each page and temporarily reduce the opacity of Layer
1.
Use the marquee tool to draw a selection around the area of
the tabs.
Delete the selection.
Return the lay back to full opacity.
OR
Try dragging the Master page to the top of the layer stack in
each page.
Hide or delete the Master page background.
This option is a little trickier, but I was able to do it.
Wait for the
black bar to appear before you release the mouse. You may
need to try
this a few times before it works.
HTH
Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
http://www.communityMX.com/
CommunityMX - Free Resources:
http://www.communitymx.com/free.cfm
.:Adobe Community Expert for Fireworks:.
Adobe Community Expert
http://tinyurl.com/2a7dyp
.:Author:.
Lynda.com -
http://movielibrary.lynda.com/authors/author/?aid=188
Peachpit Press -
http://www.peachpit.com/authors/bio.aspx?a=d98ed798-5ef0-45a8-a70d-4b35fa14c9a4
Layers Magazine -
http://www.layersmagazine.com/author/jim-babbage

Need to add 2 new columns to the existing table control of C223 transaction

Hi ABAP Gurus,
I have to do a screen enhancement for transaction C223.
Below is the requirement:
need to add 2 new columns to the existing table control of C223 transaction.
there is no customer exits, screen exit or user exit present for this transaction C223, i have found one enhancement spot for this transaction.
i dont have any idea how to do this in standard transaction C223, the table control in C223 saves the data to MKAL table and the table control uses the structure MKAL_EXPAND in the screen program.
i have created an append structure for the 2 fields to the standard table MKAL.
Can anyone please suggest me how this can be done in standard screen C223, will the enhancement spot can be used to do this....
please sugest...
Thanks & Regards

Hi Santosh,
Thanks for the reply. I have looked into this Enhancement Spot CPFX_SCREEN_SET , inside this there is only one method INPUT_DISABLED having below parameters
IM_MKAL     Importing     Type     MKAL                                                                                Production Version
EX_MSGID     Exporting     Type     SY-MSGID                                                                                Messages, Message
EX_MSGTY     Exporting     Type     SY-MSGTY                                                                                Messages, Message
EX_MSGNO     Exporting     Type     SY-MSGNO                                                                                Messages, Message
EX_MSGV1     Exporting     Type     SY-MSGV1                                                                                Messages, Message
EX_MSGV2     Exporting     Type     SY-MSGV2                                                                                Messages, Message
EX_MSGV3     Exporting     Type     SY-MSGV3                                                                                Messages, Message
EX_MSGV4     Exporting     Type     SY-MSGV4                                                                                Messages, Message
EX_INPUT_DISABLE     Exporting     Type     CHAR1                                                                                Display Only if X Was Set
the BADI definition present here is a SAP internal so we cant implement the BADI , but we can created a enhancement spot implementation for this. as per my understanding on this the enhancement spot is only for making the table control fields display / change . i dont think this can be used to add two new coloumns to C223 table control.
I am not sure thats why seeking your help/valuable sugestion on this.
Please provide your sugestion on this , so that i can come to conclusion on this issue.
Thanks & Regards
Siddhartha Mishra

Add new row in the same page

Can anyone give me the code for adding the new row in the same page itself.If we click on add button a new row should come in the table.
Thanks in advance

Hi,
invoke a method in AM on button click
public void addrows()
AddressesVOImpl vo1 = getAAddressesVO1();
AddressesVORowImpl row1 = (AddressesVORowImpl)vo1.createRow();
vo1.insertRowAtRangeIndex(0,row1);
vo1.setCurrentRow(row1);
Thanks,
Gaurav

2 single selection tables on the same page

I used the following great article:
http://blogs.sun.com/roller/page/winston?entry=single_selectable_row_table_component
to create a singlerow select table. But I want 2 of these tables on the same page of my tabset component.
On my page i have:
private TableSelectPhaseListener tablePhaseListener = new TableSelectPhaseListener();
public void setSelected(Object object) {
RowKey rowKey = (RowKey)getValue("#{currentRow.tableRow}");
if (rowKey != null) {
tablePhaseListener.setSelected(rowKey, object);
public Object getSelected(){
RowKey rowKey = (RowKey)getValue("#{currentRow.tableRow}");
return tablePhaseListener.getSelected(rowKey);
public Object getSelectedValue() {
RowKey rowKey = (RowKey)getValue("#{currentRow.tableRow}");
return (rowKey != null) ? rowKey.getRowId() : null;
public boolean getSelectedState() {
RowKey rowKey = (RowKey)getValue("#{currentRow.tableRow}");
return tablePhaseListener.isSelected(rowKey);
but when I added the second table, I had to add the duplicate the above 4 methods, changing currentRow to currentRow2 and tablePhaseListener to tablePhaseListener2, and changing the method names. I also had to make these updates in 2 other places---on the JSP code, as well as in the JavaScript!! For just 2 tables this isn't too bad, but with more tables having to synchronize everything could get real ugly real fast. Am I doing something wrong?
Also,
It seems to work, however my IE browser is still reporting some minor Javascript errors that I don't get when I had only 1 single-row select table
Thanks,
-DM

I also went the route of duplicating all methods for the single-selectable row in a table.
I have at most on my pages two tables with selectable rows and I have not run into any javascript issues.
I have had a problem when I rename my tables from "table1" etc. The row selection does not work as well when I give my table objects meaningful names. I have not had the time to dig in and discover why.

Adding additional tables to the extractor configuration

Hi Experts,
Can you please help me adding additional tables to the SAP extractor and to configure the field data in the orgstructure to show a flag against the position.
Luke - I have tried using the option said by you from Application-wide Settings-->Data Centre --> Read SAP Table, it has properly save the added table, but not able to see it from SAP extractor configruation and not able to extract any data. Also, can you please guide me how to use the fields from this table (HRP1010) to write a small piece of logic to show a flag for a particualr position based on data.
Thanks in advance,
Purandhar

Hi Purandhar,
I have tried using the option said by you from Application-wide Settings-->Data Centre
--> Read SAP Table, it has properly save the added table, but not able to see it from
SAP extractor configruation and not able to extract any data.
This has probably added a data element - I would check in the dataelementconfiguration folder in your build's .delta folder. IF so then you have the first step completed. Now you need to add the necessary configurations to use the data that comes through this data element.
Go to your orgchart/hierarchy and navigate to Views. Here select your view (or your first view if this needs to be done for more than one view - if so you'll need to repeate these steps but not the step you already did in the Data Centre), and then click the + icon next to Design Details. Here you can add a new linked detail to your view detail. Simply give it a name, select the detail to link it to (usually the top level detail which is in blue), select a link field and then select your data element that was created in the Data Centre.
Now if you try to add a section to your view inside the Design Details view designer you will see your new detail added. You can then select it and add fields from this detail.
Also, can you please guide me how to use the fields from this table (HRP1010) to write
a small piece of logic to show a flag for a particualr position based on data.
Once you have been able to add the data in the views designer you will probably need to do some XML and XSL editing because you cannot edit XSL files in the AdminConsole and you will need to do this to get your icon/flag to show.
First of all you need to create a new XSL file and put it into a folder in your .delta\root folder. For example, My_XSL_files. Here you need to write the code to render your flag based on your variable. You can find plenty of examples in all of the pre-existing XSL files. Then you need to copy PresentationResources.xml to .delta\root\XML and add the reference to your new XSL file.
Go to your build's .delta folder and go to detailconfiguration. Find the detail you just created and open it. You'll find a section in their that you just added with a reference to an XSL file (e.g. if you added a Simple Caption section it will probably be something like SimpleCaptionXSL). Change this to the reference in the PresentationResources.xml.
Load your build in the AdminConsole and hit Publish. Once done you should see your icon. Sometimes if your XSL is invalid or the code doesn't work you won't see anything. This is not unusual as the whole process can be quite tricky - even for us with lots of experience!
Good luck!
Luke

Can I replicate new tables using the ACTIVE STANDBY PAIR replication scheme

Hi,
I have created myself a simple setup using an active/standby pair with a single subscriber like so:
CREATE ACTIVE STANDBY PAIR cie ON "tt-test1", cie ON "tt-test2" RETURN RECEIPT SUBSCRIBER cie on "tt-test3";
I have then added some tables on the master, they did not replicate automatically. I find this:
Command> repschemes;
Replication Scheme Active Standby:
Master Store: CIE on TT-TEST1
Master Store: CIE on TT-TEST2
Master Return Service: Return Receipt
Subscriber Store: CIE on TT-TEST3
Excluded Tables:
ROOT.EXTRACTOR_
ROOT.PROMPT_
ROOT.PREFERABLE_
Included Tables:
List too long (59 items), use verbosity 4 to display
<snip>
My question is ... how do I include these tables in replication?
Do I need to trash and clone the secondary master store and the subscriber again? Even doing that won't add the tables to the replication scheme so I don't think that is a solution.
I couldn't find much documentation on the ALTER REPLICATION statement but from what I could find it requires me to know the 'name' of the replication scheme and the examples in the documentation didn't work when I used 'Active Standby' as the scheme name in the statement.
Am I being retarded here? Is this a limitation of using the ACTIVE STANDBY PAIR replication model?
Thanks in advance.
Huw

When you setup and rollout the ACTIVE/STANDBY pair (or indeed legacy replication) it only includes tables that already exist. The normal deployment process is:
1. Create the first datastore (the one which will initially be the 'active').
2. Create (and populate) all necessary tables.
3. Create the active/standby pair replication scheme.
4. Start the repagent
5. Make the datastore active by calling ttRepStateSet('ACTIVE')
6. Use ttRepAdmin -duplicate to create the standby store from the active
7. Start repagent at standby
8. Use ttRepAdmin -duplicate to create the subscriber store from the standby
7. Start repagent at subscriber
If you need to add/remove tables later you must do the following:
At active node:
1. Create any new tables (and populate them) as needed
2. Stop repagent
3. Execute ALTER ACTIVE STANDBY PAIR with INCLUDE and/or EXCLUDE clauses as required
4. Start repagent
Then you need to redeploy the other stores:
At standby:
5. Stop repagent
6. Drop datastore (ttDestroy)
7. Re-create datastore from active using ttRepAdmin -duplicate
8. Start repagent
At subscriber:
9. Stop repagent
10. Drop datastore (ttDestroy)
11. Re-create datastore from standby using ttRepAdmin -duplicate
12. Start repagent
This is documented in the TimesTen Replication Guide in the section on administering an active/standby pair.
Chris

How can i import tables from a different schema into the existing relational model... to add these tables in the existing model? plss help

how can i import tables from a different schema into the existing relational model... to add these tables in the existing relational/logical model? plss help
note; I already have the relational/logical model ready from one schema... and I need to add few more tables to this relational/logical model
can I import the same way as I did previously??
but even if I do the same how can I add it in the model?? as the logical model has already been engineered..
please help ...
thanks

Hi,
Before you start, you should probably take a backup copy of your design (the .dmd file and associated folder), in case the update does not work out as you had hoped.
You need to use Import > Data Dictionary again, to start the Data Dictionary Import Wizard.
In step 1 use a suitable database connection that can access the relevant table definitions.
In step 2 select the schema (or schemas) to import. The "Import to" field in the lower left part of the main panel allows you to select which existing Relational Model to import into (or to specify that a new Relational Model is to be created).
In step 3 select the tables to import. (Note that if there are an Foreign Key constraints between the new tables and any tables you had previously imported, you should also include the previous tables, otherwise the Foreign Key constraints will not be imported.)
After the import itself has completed, the "Compare Models" dialog is displayed. This shows the differences between the model being imported and the previous state of the model, and allows you to select which changes are to be applied.
Just selecting the Merge button should apply all the additions and changes in the new import.
Having updated your Relational Model, you can then update your Logical Model. To do this you repeat the "Engineer to Logical Model". This displays the "Engineer to Logical Model" dialog, which shows the changes which will be applied to the Logical Model, and allows you to select which changes are to be applied.
Just selecting the Engineer button should apply all the additions and changes.
I hope this helps you achieve what you want.
David

Adding new node to the Clusterware fails with the root.sh script.

Dear All,
I had successfully added third node to the existing 2 node cluster. After adding new node I need to run the root.sh scripts, but it was faling with the below error.
Please help me with the below issue:
Instantiating scripts for add node (Monday, April 8, 2013 3:23:14 PM EDT)
. 1% Done.
Instantiation of add node scripts complete
Copying to remote nodes (Monday, April 8, 2013 3:23:16 PM EDT)
............................................................................................... 96% Done.
Home copied to new nodes
Saving inventory on nodes (Monday, April 8, 2013 3:31:40 PM EDT)
. 100% Done.
Save inventory complete
WARNING:
The following configuration scripts need to be executed as the "root" user in each new cluster node. Each script in the list below is followed by a list of nodes.
/u01/app/11.2.0/grid/root.sh #On nodes svphxwgdbprd06
To execute the configuration scripts:
1. Open a terminal window
2. Log in as "root"
3. Run the scripts in each cluster node
The Cluster Node Addition of /u01/app/11.2.0/grid was successful.
Root.SH Script Log:
[root@svphxwgdbprd06 ~]# /u01/app/11.2.0/grid/root.sh
Performing root user operation for Oracle 11g
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /u01/app/11.2.0/grid
Enter the full pathname of the local bin directory: [usr/local/bin]:
The contents of "dbhome" have not changed. No need to overwrite.
The contents of "oraenv" have not changed. No need to overwrite.
The contents of "coraenv" have not changed. No need to overwrite.
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.
Using configuration parameter file: /u01/app/11.2.0/grid/crs/install/crsconfig_params
Creating trace directory
User ignored Prerequisites during installation
OLR initialization - successful
Adding Clusterware entries to inittab
CRS-2672: Attempting to start 'ora.mdnsd' on 'svphxwgdbprd06'
CRS-2676: Start of 'ora.mdnsd' on 'svphxwgdbprd06' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'svphxwgdbprd06'
CRS-2676: Start of 'ora.gpnpd' on 'svphxwgdbprd06' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'svphxwgdbprd06'
CRS-2672: Attempting to start 'ora.gipcd' on 'svphxwgdbprd06'
CRS-2676: Start of 'ora.cssdmonitor' on 'svphxwgdbprd06' succeeded
CRS-2676: Start of 'ora.gipcd' on 'svphxwgdbprd06' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'svphxwgdbprd06'
CRS-2672: Attempting to start 'ora.diskmon' on 'svphxwgdbprd06'
CRS-2676: Start of 'ora.diskmon' on 'svphxwgdbprd06' succeeded
CRS-2676: Start of 'ora.cssd' on 'svphxwgdbprd06' succeeded
ASM created and started successfully.
Disk Group DATA created successfully.
clscfg: -install mode specified
clscfg: EXISTING configuration version 5 detected.
clscfg: version 5 is 11g Release 2.
Successfully accumulated necessary OCR keys.
clscfg: Arguments check out successfully.
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Failed to initialize Oracle Cluster Registry for cluster, rc 105
Oracle Grid Infrastructure Repository configuration failed at /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm line 6818.

The document references posted already are very good ones. However, I would say that on personal experience (on Solaris and 10gR2) that the addnode tools gave me nothing but problems. Luckily, I was able to build a parallel cluster (with three nodes) on other hardware and then move the databases across via DataGuard. It was quicker and cleaner (and easier!) that way...
Good luck!

Add a new table to an existing Print Layout Designer report

Is it possible to add a new table to an existing Print Layout Designer report? For example, in the Production Order there is a Sales Order field (which is displayed on the report), I would like to display some information from UDFs found on the Sales Order, but when I add a Database Field to the report the Sales Order tables does not appear in the list (OWOR).

Hi
It is possible provided there is a relationship which exists between two tables.
You can add a Database field. Goto the Properties and selct Content Tab.
Now in the Table dropdown, hold the Alt Key and click. This displays all the tables in B1. After selecting the Table, you can select the related Column.
Remember there should be a relationship which exists between this column and existing columns.
Because PLD works completely on Joins to my understanding

How to create new or delete the existing row in the grid....

hi my friends...
i am developing report using Reuse_alv_grid_display...
my requirement is... At runtime
          1. i may create new row on the grid (empty row inwhich i may enter the data).
          2. i may delete a existing row in the grid
          3. i may edit the existing data...
then i have to trace the modification in the grid in one internal table...
how can i get into this.....
note:
i have some idea to edit the existing record in the grid and trace those modification,
but i don't know abt how to create new or delete the existing row....
can you give me some idea...

Hi deva,
write a class which implemets these methods
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
    METHODS:
To handle the toolbar on alv
     handle_toolbar
       FOR EVENT toolbar OF cl_gui_alv_grid
          IMPORTING e_object e_interactive,
To handle the buttons on the alv grid
     handle_user_command
       FOR EVENT user_command OF cl_gui_alv_grid
       IMPORTING e_ucomm.
endclass.
Now Implement these methods.
CLASS lcl_event_receiver IMPLEMENTATION.
To handle the toolbar on alv
METHOD handle_toolbar.
   DATA ls_toolbar TYPE stb_button.
    CLEAR gs_toolbar.
    MOVE 3 TO gs_toolbar-butn_type.
    APPEND gs_toolbar TO e_object->mt_toolbar.
    CLEAR gs_toolbar.
    PERFORM icon_create USING 'ICON_INSERT_ROW' gs_toolbar-icon.
    MOVE text-010 TO gs_toolbar-function.
    MOVE text-012 TO gs_toolbar-quickinfo.
    MOVE ' ' TO gs_toolbar-disabled.
    APPEND gs_toolbar TO e_object->mt_toolbar.
    CLEAR gs_toolbar.
    PERFORM icon_create USING 'ICON_DELETE_ROW' gs_toolbar-icon.
    MOVE text-011 TO gs_toolbar-function.
    MOVE text-013 TO gs_toolbar-quickinfo.
    MOVE ' ' TO gs_toolbar-disabled.
    APPEND gs_toolbar TO e_object->mt_toolbar.
ENDMETHOD.
   METHOD handle_user_command.
In this form, check the function code(e_ucomm has the function code), based on that do the required action.
as i said yesterday(i.e for appending a row, deleting a row, modifying a row)
    PERFORM user_command USING e_ucomm.
ENDMETHOD
endclass.
Before calling the alv method, create a object of this class.
DATA :
      gref_event_receiver TYPE REF TO lcl_event_receiver,
      gv_tables_alv          TYPE REF TO cl_gui_alv_grid.
      CREATE OBJECT gref_event_receiver.
      SET HANDLER   gref_event_receiver->handle_user_command
                    FOR gv_tables_alv.
      SET HANDLER   gref_event_receiver->handle_toolbar
                    FOR gv_tables_alv.
check this program for event handling, it is the similar way
demo_abap_objects_events
Hope u understood this.
Regards,
Prasant
reward if helpful

Adding New table to the existing page

Similar Messages

Maybe you are looking for