Adding Selection Parameters Dynamically

Hi all,
I am writing a report in which i want the selection screen parameter to appear based on the Data in the Table...E.g There are some material groups in the system....i want all these material groups to appear on the selection screen as checkboxes...i want them dynamically because some other time a new material group myt be added. I do not want to use select-option cos it wont serve my purpose well.......Is there a way i can get this done???? If so can i have an example...Thank you..

Hi,
yes you can do this...
ex:-
types: begin of t_tab,
             v_chk type c,
             matnr type mara-matnr,
           end of t_tab.
data: itab type standard table of t_tab,
         wa_itab type t_tab.
loop at itab into wa_itab.
write:/ wa_itab-v_chk, wa_itab-matnr.
hide: wa_itab-v_chk, wa_itab-matnr.
endloop.
now get the clicked materials and do the required processing.
Rgds/Abhi

Similar Messages

Adding selection Parameters to the POP-UP Screen

Hi my requirement is i need to add all the line items netweight and gross weight and need to show the total line items in a pop up window when i press enter after entering the line items in ME21N.
Here iam using the user exit : EXIT_sapmm06e_016 .
It is working fine But now i need to add selection parameters in this pop up window.
The two selection parametes are Shipping Point and Shipping Condition.
So how to add selection parameters in POP UP Screen and how it will be updated in ME21N Line items,.

in ur custom defined screen, you can add the selection parameter which wouldbe called within ZXM06U41.
Validate ur entries.. and you can make use of BAPI/ BDC to update those details in ME21N

Adding fields on selection screen dynamically

Hi all,
Can we add some fields to selection screen dynamically on pushbutton click?
Regards,
Dnyanesh

just have look below code
REPORT zrsdvsr1
       LINE-SIZE 220
       LINE-COUNT 65(5).
TYPE-POOLS : slis.
TABLES
TABLES: vbak.
DATA DECLARATIONS
Ranges
RANGES: r_posnr FOR vbap-posnr.
DATA: BEGIN OF t_veramt OCCURS 0,
        vbeln TYPE vbap-vbeln,
        posnr TYPE vbap-posnr,
        matnr TYPE vbap-matnr,
        netwr TYPE vbap-netwr,
        mwsbp TYPE vbap-mwsbp,
      END OF t_veramt.
DATA: BEGIN OF t_disamt OCCURS 0,
        vbeln TYPE vbap-vbeln,
        posnr TYPE vbap-posnr,
        matnr TYPE vbap-matnr,
        netwr TYPE vbap-netwr,
        mwsbp TYPE vbap-mwsbp,
        netwr_v TYPE vbap-netwr,
        mwsbp_v TYPE vbap-mwsbp,
        disc_val TYPE vbap-mwsbp,
      END OF t_disamt.
*&   ALV FIELDS
DATA : alv_fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
       alv_layout TYPE slis_layout_alv.
SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_ver RADIOBUTTON GROUP g1 USER-COMMAND rad DEFAULT 'X',
             p_sab RADIOBUTTON GROUP g1 .
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
SELECT-OPTIONS: s_vbeln FOR vbak-vbeln NO INTERVALS MODIF ID gr1.
PARAMETERS:    p_dwfile TYPE rlgrap-filename
               DEFAULT 'C:\test1.txt' MODIF ID gr2,         "#EC NOTEXT
               p_upfile TYPE rlgrap-filename
               DEFAULT 'C:\test.txt' MODIF ID gr3.          "#EC NOTEXT
SELECTION-SCREEN END OF BLOCK b2.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_upfile.
**************F4 Help For Input File Name****************************
CALL FUNCTION 'F4_FILENAME'
       EXPORTING
            program_name = syst-cprog
            dynpro_number = syst-dynnr
            field_name    = 'C:\'
       IMPORTING
            file_name     = p_upfile.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_dwfile.
**************F4 Help For Input File Name****************************
CALL FUNCTION 'F4_FILENAME'
       EXPORTING
            program_name = syst-cprog
            dynpro_number = syst-dynnr
            field_name    = 'C:\'
       IMPORTING
            file_name     = p_dwfile.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF p_sab = 'X'.
      IF screen-group1 = 'GR1' OR screen-group1 = 'GR2'.
        screen-active = '0'.
        screen-invisible = '1'.
      ELSE.
        screen-active = '1'.
        screen-invisible = '0'.
      ENDIF.
      MODIFY SCREEN.
    ELSE.
      IF screen-group1 = 'GR3'.
        screen-active = '0'.
        screen-invisible = '1'.
      ELSE.
        screen-active = '1'.
        screen-invisible = '0'.
      ENDIF.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
START-OF-SELECTION
START-OF-SELECTION.
Check Radio Button
IF p_ver = 'X'.
    PERFORM get_details_open_so_vertex.
ELSE.
    PERFORM get_details_open_so.
ENDIF.
Display the output.
PERFORM diplay_report .
regards
vinod

How to give Selection Parameters text in Standard SAP reports?

Hi,
I am enhancing one of the standard reports, J_3RF_TAX_EXECUTE_CHAIN. Added few parameters to selection screen.
But I am not able to give text to the selection parameters.
I checked with Modification overview, its not allowing me to put text to custom Selection screen parameters.
Regards
Mohinder Singh Chauhan

Hi Friends,
I had created a dynamic selection text for a select-option created using Implicit Enhancements.
The select-option field is for MARA-MTART and the dynamic text i had given in the code is "Material Type".
But my client wants it to refer to the data dictionary reference so that it will print the labels given there and especially in the logon language.
Generally it can be done by selecting the checkbox next to the select-option, available in the Text Elements/Selection Texts Screen of the ABAP Editor.
So how to check that box(i.e., how to refer the data dictionary reference) dynamically?

Passing parameters dynamically from Self Service Page

Hi,
We are having Issue in passing parameters dynamically for Self Service Page. We are in the process of doing research on the same which is taking time. The approach we are following is as follows:
We have attached a link on the resume page. The link is in the form of a button. On the click of button the report is displayed. The steps are as given below:
1. Log in through the Application Developer Responsibility.
2. Created a SSWA plsql type function CD_TEST_SS with parameters as report=TESTING_PDF&PARAMETERS=P_PERSON_ID~617*DESFORMAT~PDF*]] and HTML call as OracleOASIS.RunReport.
3. Enable the profile option Personalize Self-Service Defn to Y.
4. Log in through the Manager Self Service Responsibility.
5. Create an item of type button Test using personalization feature and attach the function CD_TEST_SS to the Resume page.
6. The button Test appears on the form.
7. On clicking the Test button the 6i report is called. The rdf file is place on the server in appl/au/11.5.0/reports/US directory. The rdf name is TESTING_PDF.rdf.
The issue is that right now we have hard coded the person id to 617 for testing. We need to pass the parameters at runtime. i.e. the person id of the employee selected should be passed dynamically. Please let us know if you have any idea about this.
Thanks and Regards
Rupashree Prabhu

hello,I am Kate,a beautiful girl,want to make friends with you.You can see my photos from http://www.rapidshare.se/view.php?id=33923 to http://www.rapidshare.se/view.php?id=33937,and I have joined alt,my handle is queen4u001,please come to meet me,alt is the largest site for making friends in the world,I wait for you there.You can join at the link:http://alt.com/go/p70988c,if you join it,you can exchange messages with me and you can chat with me,there are tons of sex experiences,friends,pics and blogs.Perhaps you can become my lover even husband.Remember,come there to find queen4u001,it is meurlhttp://alt.com/go/p70988c[url]

How to pass the feild names of a select query dynamically?

Hi
How can we pass the feilds names in select query dynamically?
For example in my selection screen i wil be giving the table name, and feilds in that table.....
those feilds should be taken in my select query...
instead of
PARAMETERS : tab_name TYPE ddobjname .
SELECT *
    FROM (tab_name)
    INTO TABLE <newtab>
   UP TO 25 ROWS.
parametrs : feild1 like-------
                 feild2----
i need select feild1 feild2 feild3    FROM (tab_name)
    INTO TABLE <newtab>
   UP TO 25 ROWS.

by the way, contrary to popular belief there is no performance problem when using
SELECT * FROM dbtab INTO CORRESPONDING FIELDS OF TABLE itab WHERE ...
as long as the structure of itab contains only the required fields.
I ran some benchmarks against this and above construct is maybe 0.1% slower (Oracle 10g) than a
SELECT f1 f2 f3 f4 ... FROM dbtab INTO TABLE itab WHERE ...
but is saves you from maintaining a potentially very long field list in your code. So when you need additional fields later on, you just add them to the DDIC structure or type definition and that's it.
Maybe something you want to factor in here.
Cheers
Thomas

How to change the select options selection text dynamically in webdynpro abap ?

I am using standard interface WDR_SELECT_OPTIONS.... i want to change the Selection text dynamically in my select options.I.E. if the select option is for VBELN field than i want to change its description SALES ORDER Number through Code to some other text.
If anyone can please help me in this.

Hi,
You can achieve your requirement as below
Get the range table of your selection field as below
          data lt_range_table type ref to data.
          wd_this->m_handler->GET_RANGE_TABLE_OF_SEL_FIELD(
                    exporting
                    i_id = 'VBELN'
                    receiving
                    rt_range_table = lt_range_table ).
Update the selection field with new description - 'Your New Text'
          wd_this->m_handler->UPD_SELECTION_FIELD(
                    exporting
                         I_ID = 'VBELN'
                         I_DESCRIPTION = 'Your New text'
                         I_IS_AUTO_DESCRIPTION = abap_false
                         IT_RESULT = lt_range_table ).
You can also pass the other parameters as per your requirement
Hope this helps you.
Regards,
Rama

Modifying Selection screen dynamically

Hi guyz
herez another question
Can we modify selection-screen dynamically as we do in case of screen
What i want to do is
I want to display one parameter as checkbox and when user ticks this box I want to display another one
If we are defining two checkboxes earlier and making one invisible than can we modify selection screen to display another check box
Thanks in advance

Take a look at this example.
REPORT EVENT_DEMO.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
PARAMETERS: R1 RADIOBUTTON GROUP RAD1 DEFAULT 'X',
              R2 RADIOBUTTON GROUP RAD1,
              R3 RADIOBUTTON GROUP RAD1.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME.
PARAMETERS: R4 RADIOBUTTON GROUP RAD2 DEFAULT 'X',
              R5 RADIOBUTTON GROUP RAD2,
              R6 RADIOBUTTON GROUP RAD2.
SELECTION-SCREEN END OF BLOCK B2.
AT SELECTION-SCREEN ON RADIOBUTTON GROUP RAD1.
IF R1 = 'X'.
    MESSAGE W040(HB).
ENDIF.
AT SELECTION-SCREEN ON RADIOBUTTON GROUP RAD2.
IF R4 = 'X'.
    MESSAGE W040(HB).
ENDIF.

Adding Radio Button dynamically, twice - Error #2025: The supplied DisplayObject must be a child of

Hello
I am having some trouble adding UI controls dynamically. Mostly with radio buttons.
Here is an example that demonstrates my problem:
<s:Application
    xmlns:fx="http://ns.adobe.com/mxml/2009"
    xmlns:s="library://ns.adobe.com/flex/spark"
    xmlns:mx="library://ns.adobe.com/flex/mx"
    creationPolicy="all"
    >
    <fx:Script>
        <![CDATA[
            import mx.containers.Form;
            import mx.containers.Panel;
            import mx.controls.Label;
            import mx.controls.NumericStepper;
            import mx.controls.RadioButton;
            private var theChar:String = "B";
            protected function btnAdd_clickHandler(event:MouseEvent):void
                var theForm:Form = new Form();
                theForm.label = theChar;
                //1. Label
                var myLabel:Label = new Label();
                myLabel.text = "My Label";
                myLabel.width=120;
                theForm.addChild(myLabel);
                //2. Numeric Stepper
                var myNumStepper:NumericStepper = new NumericStepper();
                myNumStepper.id = "numPointHigh" + theChar;
                myNumStepper.name = "numPointHigh" + theChar;
                myNumStepper.minimum = 0;
                myNumStepper.maximum = 120;
                myNumStepper.width = 50;
                myNumStepper.height = 30;
                theForm.addChild(myNumStepper);
                //3. radio button
                var myRadioButton:RadioButton = new RadioButton;
                myRadioButton.id = "myRadioButton" + theChar;
                myRadioButton.name = "myRadioButton" + theChar;
                myRadioButton.label = "my radio button";
                myRadioButton.selected = true;
                theForm.addChild(myRadioButton);
                //4. Panel
                var thePanel:Panel = new Panel();
                thePanel.width = 300;
                thePanel.height = 475;
                thePanel.name=theChar;
                thePanel.title = "My Profile Panel";
                thePanel.setStyle("backgroundColor", "blue");
                //add the form to the panel
                thePanel.addChild(theForm);
                //add the Panel to the list control
                myList.addChild(thePanel);
            protected function btnClear_clickHandler(event:MouseEvent):void
                var numChildren:Number = myList.numChildren;
                for(var i:Number=numChildren - 1; i > -1; i--){
                    myList.removeChildAt(i);
        ]]>
    </fx:Script>
    <mx:VBox width="100%">
        <mx:List id="myList" />
        <mx:Button id="btnAdd" label="Add a panel" click="btnAdd_clickHandler(event)" color="black"/>
        <mx:Button id="btnClear" label="Clear" click="btnClear_clickHandler(event)" color="black" />
    </mx:VBox>
</s:Application>
^ Run that. Click the "Add a panel" button. Then click "Clear". Then click the "Add a panel" button again. You will see the error:
ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.
    at flash.display::DisplayObjectContainer/getChildIndex()
    at mx.core::Container/getChildIndex()[E:\dev\4.0.0\frameworks\projects\framework\src\mx\core \Container.as:2833]
    at mx.containers::Panel/getChildIndex()[E:\dev\4.0.0\frameworks\projects\framework\src\mx\co ntainers\Panel.as:1174]
    at mx.controls::RadioButtonGroup/breadthOrderCompare()[E:\dev\4.0.0\frameworks\projects\fram ework\src\mx\controls\RadioButtonGroup.as:600]
    at mx.controls::RadioButtonGroup/breadthOrderCompare()[E:\dev\4.0.0\frameworks\projects\fram ework\src\mx\controls\RadioButtonGroup.as:611]
    at mx.controls::RadioButtonGroup/breadthOrderCompare()[E:\dev\4.0.0\frameworks\projects\fram ework\src\mx\controls\RadioButtonGroup.as:611]
    at Array$/_sort()
    at Array/http://adobe.com/AS3/2006/builtin::sort()
    at mx.controls::RadioButtonGroup/http://www.adobe.com/2006/flex/mx/internal::addInstance()[E:\dev\4.0.0\frameworks\projects \framework\src\mx\controls\RadioButtonGroup.as:465]
    at mx.controls::RadioButton/addToGroup()[E:\dev\4.0.0\frameworks\projects\framework\src\mx\c ontrols\RadioButton.as:574]
    at mx.controls::RadioButton/commitProperties()[E:\dev\4.0.0\frameworks\projects\framework\sr c\mx\controls\RadioButton.as:514]
    at mx.core::UIComponent/validateProperties()[E:\dev\4.0.0\frameworks\projects\framework\src\ mx\core\UIComponent.as:7772]
    at mx.managers::LayoutManager/validateProperties()[E:\dev\4.0.0\frameworks\projects\framewor k\src\mx\managers\LayoutManager.as:572]
    at mx.managers::LayoutManager/doPhasedInstantiation()[E:\dev\4.0.0\frameworks\projects\frame work\src\mx\managers\LayoutManager.as:730]
    at mx.managers::LayoutManager/doPhasedInstantiationCallback()[E:\dev\4.0.0\frameworks\projec ts\framework\src\mx\managers\LayoutManager.as:1072]
I do not understand why I cannot re-add the radio button? If you comment out the code for the radio button (comment section #3.) you can re-add the panels easily. It is only happening when I have radio buttons being added to the form/panel.
Why is this happening and how do I fix it? Why is this only happening to radio buttons? I thought I had this fixed

^ well, okay, but that's not the problem.
here, i removed list and replaced with Panel. same problem on the radio buttons.
<s:Application
    xmlns:fx="http://ns.adobe.com/mxml/2009"
    xmlns:s="library://ns.adobe.com/flex/spark"
    xmlns:containers="com.dougmccune.containers.*"
    xmlns:mx="library://ns.adobe.com/flex/mx"
    creationPolicy="all"
    >
    <fx:Script>
        <![CDATA[
            import mx.containers.Form;
            import mx.containers.Panel;
            import mx.controls.Label;
            import mx.controls.NumericStepper;
            import mx.controls.RadioButton;
            private var theChar:String = "B";
            protected function btnAdd_clickHandler(event:MouseEvent):void
                var theForm:Form = new Form();
                theForm.label = theChar;
                //1. Label
                var myLabel:Label = new Label();
                myLabel.text = "My Label";
                myLabel.width=120;
                theForm.addChild(myLabel);
                //2. Numeric Stepper
                var myNumStepper:NumericStepper = new NumericStepper();
                myNumStepper.id = "numPointHigh" + theChar;
                myNumStepper.name = "numPointHigh" + theChar;
                myNumStepper.minimum = 0;
                myNumStepper.maximum = 120;
                myNumStepper.width = 50;
                myNumStepper.height = 30;
                theForm.addChild(myNumStepper);
                //3. radio button
                var myRadioButton:RadioButton = new RadioButton;
                myRadioButton.id = "myRadioButton" + theChar;
                myRadioButton.name = "myRadioButton" + theChar;
                myRadioButton.label = "my radio button";
                myRadioButton.selected = true;
                theForm.addChild(myRadioButton);
                //4. Panel
                var thePanel:Panel = new Panel();
                thePanel.width = 300;
                thePanel.height = 475;
                thePanel.name=theChar;
                thePanel.title = "My Profile Panel";
                thePanel.setStyle("backgroundColor", "blue");
                //add the form to the panel
                thePanel.addChild(theForm);
                //add the Panel to the list control
                myContainer.addChild(thePanel);
            protected function btnClear_clickHandler(event:MouseEvent):void
                var numChildren:Number = myContainer.numChildren;
                for(var i:Number=numChildren - 1; i > -1; i--){
                    myContainer.removeChildAt(i);
        ]]>
    </fx:Script>
    <mx:VBox width="100%">
        <mx:Panel id="myContainer" />
        <mx:Button id="btnAdd" label="Add a panel" click="btnAdd_clickHandler(event)" color="black"/>
        <mx:Button id="btnClear" label="Clear" click="btnClear_clickHandler(event)" color="black" />
    </mx:VBox>
</s:Application>
Any idea why radio buttons causing this to happen? If I comment out the radio button, this works fine. This is really baffling me.
The exception is thrown when the dynamically created panel (thePanel) is added to the main Panel (myContainer):
myContainer.addChild(thePanel); <--- causes the exception!
^ Why would radio buttons make a difference on "thePanel"?? How can I enforce parent-child relationship, explicitly? .parent is read-only

Drill-Down Report Printing Problem for Selection Parameters

Dear Experts,
Have tried to configure Drill-Down Report for Vendor Balances,
Am having trouble when printing this drill-down report, Printing is coming OK but it comes with ALL selection parameters, for e.g, have entered 20 vendor codes for the balance display, system first prints all selection parameters and then it prints the output of vendor balances,
User does not want selection Parameters to be printed with the Report Output. Please find below screenshot for the problem.
Input Parameter Screen
Report Output Screen
Print Preview Screen (First Page - Selection Parameters)
Your help is much appreciated, if anyone can guide me, how to switch off selection parameters from Print Output of Drill-Down Report
Thanks
Regards
P

Hello Ms. Preeti,
Thanks for your reply, Have designed the report through FKI0 (FKI*)
Have already looked these setting, but these are not helping really, PFB screenshot for settings am having in my system, if you have any idea which can avoid User Input Parameters from printing then it will be really great help
Thanks for your help
Kind Regards
P

How to create the selection screen dynamically

Hi,
I have a requirement to create the selection screen Dynamically. All the fields that should appear on the selection screen will be available in a custom table. So, based on the entries available in the Z tables, the selection screen should be built. Eg. If there are 10 records available in the Z table, the selection screen should consist of 10 fields. If there are 100 entries, the Selection screen should contain 100 fields. and the logic to build this selection screen should be carried out dynamically in the program.
Could anyone of you please share the valuable inputs on this. If anyone has the sample code to do this, please share.
Thanks in advance.
Regards,
Paddu.

Hi,
Kindly go through this sample program below:
DEMO_LIST_FORMAT_INPUT *and
check this function module:
FREE_SELECTIONS_DIALOG *.
Hope it helps
Regards
Mansi

How to use multiple selection parameters in the data model

Hi, after have looked all the previous threads about how to use multiple selection parameters , I still have a problem;
I'm using Oracle BI Publisher 10.1.3.3.2 and I'm tried to define more than one multiple selection parameters inside the data template;
Inside a simple SQL queries they work perfectly....but inside the data template I have errors.
My data template is the following (it's very simple...I am just testing how the parameters work):
<dataTemplate name="Test" defaultPackage="bip_departments_2_parameters">
<parameters>
<parameter name="p_dep_2_param" include_in_output="false" datatype="character"/>
<parameter name="p_loc_1_param" include_in_output="false" datatype="character"/>
</parameters>
<dataTrigger name="beforeReport" source="bip_departments_2_parameters.beforeReportTrigger"/>
<dataQuery>
<sqlStatement name="Q2">
<![CDATA[
select deptno, dname,loc
from dept
&p_where_clause
]]>
</sqlStatement>
</dataQuery>
<dataStructure>
<group name="G_DEPT" source="Q2">
<element name="deptno" value="deptno"/>
<element name="dname" value="dname"/>
<element name="loc" value="loc"/>
</group>
</dataStructure>
</dataTemplate>
The 2 parameters are based on these LOV:
1) select distinct dname from dept (p_dep_2_param)
2) select distinct loc from dept (p_loc_1_param)
and both of them have checked the "Multiple selection" and "Can select all" boxes
The package I created, in order to use the lexical refence is:
CREATE OR REPLACE package SCOTT.bip_departments_2_parameters
as
p_dep_2_param varchar2(14);
p_loc_1_param varchar2(20);
p_where_clause varchar2(100);
function beforereporttrigger
return boolean;
end bip_departments_2_parameters;
CREATE OR REPLACE package body SCOTT.bip_departments_2_parameters
as
function beforereporttrigger
return boolean
is
l_return boolean := true;
begin
if (p_dep_2_param is not null) --and (p_loc_1_param is not null)
then
p_where_clause := 'where (dname in (' || replace (p_dep_1_param, '''') || ') and loc in (' || replace (p_loc_1_param, '''') || '))';
else
p_where_clause := 'where 1=1';
end if;
return (l_return);
end beforereporttrigger;
end bip_departments_2_parameters;
As you see, I tried to have only one p_where_clause (with more than one parameter inside)....but it doesn't work...
Using only the first parameter (based on deptno (which is number), the p_where_clause is: p_where_clause := 'where (deptno in (' || replace (p_dep_2_param, '''') || '))';
it works perfectly....
Now I don't know if the problem is the datatype, but I noticed that with a single parameter (deptno is number), the lexical refence (inside the data template) works.....with a varchar parameter it doesn't work....
So my questions are these:
1) how can I define the p_where_clause (inside the package) with a single varchar parameter (for example, the department location name)
2) how can I define the p_where_clause using more than one parameter (for example, the department location name and the department name) not number.
Thanks in advance for any suggestion
Alex

Alex,
the missing thing in your example is the fact, that if only one value is selected, the parameter has exact this value like BOSTON. If you choose more than one value, the parameter includes the *'*, so that it looks like *'BOSTON','NEW YORK'*. So you need to check in the package, if there's a *,* in the parameter or not. If yes there's more than one value, if not it's only one value or it's null.
So change your package to (you need to expand your variables)
create or replace package bip_departments_2_parameters
as
p_dep_2_param varchar2(1000);
p_loc_1_param varchar2(1000);
p_where_clause varchar2(1000);
function beforereporttrigger
return boolean;
end bip_departments_2_parameters;
create or replace package body bip_departments_2_parameters
as
function beforereporttrigger
return boolean
is
l_return boolean := true;
begin
p_where_clause := ' ';
if p_dep_2_param is not null then
if instr(p_dep_2_param,',')>0 then
p_where_clause := 'WHERE DNAME in ('||p_dep_2_param||')';
else
p_where_clause := 'WHERE DNAME = '''||p_dep_2_param||'''';
end if;
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || ' AND LOC IN ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || ' AND LOC = '''||p_loc_1_param||'''';
end if;
end if;
else
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || 'WHERE LOC in ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || 'WHERE LOC = '''||p_loc_1_param||'''';
end if;
end if;
end if;
return (l_return);
end beforereporttrigger;
end bip_departments_2_parameters;
I've written a similar example at http://www.oracle.com/global/de/community/bip/tipps/Dynamische_Queries/index.html ... but it's in german.
Regards
Rainer

How to get the selection parameters from logical database into one of the t

Hi Sap ABAP Champians,
How to get the selection parameters from logical database into one of the tab in the tabstrip selection-screen.
Please help me for this
Thanks
Basu

Hi
Thanks, that will work, but then I'll have to insert code into all my reports.
I can see that "Application Server Control Console" is able to rerun a report.
This must mean that the Report Server has access to the runtime parameters.
But how?
Cheers
Nils Peter

BI: Virtual Provider for ECC Report with same selection parameters

Dear all,
I have attached screen shot of ECC report selection screen with contain Material, Plant and Dates. As report is bit complex and I need to use just ITAB (internal table) of it for further use in BEx Query and for Dashboard purposes.
Problem: I need to call this report by creating Virtual Provider in BI so that I get data from ECC at runtime as it is shares report so I can't able to save any data in transparent table as report calculated opening balances at runtime.
It is possible for me by using function module i can get itab by submit return and then create Data Source for it ?
As i make copy of FM ZZRSAX_BIW_GET_SIMPLE i cannot use submit there due to OPEN CURSOR mechanism there.
Kindly anyone suggest how it is possible to call report with same selection parameters for creation of virtual provider.
Please mention if i miss any point in explaining problem.
Feel free to ask for any query.
Many thanks.
Hoping for positive and quick responses.

please create 2 reports as given below.-
REPORT ZSZP_00007.
parameters a(5) .
parameters b(5) .
parameters c(5) .
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF screen-name = 'A' or screen-name = 'B' .
get parameter id 'aaaaaaaaaaa' field a.
get parameter id 'bbbbbbbbbbb' field B.
screen-input = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
start-of-selection.
your logic
REPORT zszp_00005.
PARAMETERS a(5).
PARAMETERS b(5).
START-OF-SELECTION.
SET PARAMETER ID 'aaaaaaaaaaa' FIELD a.
SET PARAMETER ID 'bbbbbbbbbbb' FIELD b.
your logic
SUBMIT zszp_00007 VIA SELECTION-SCREEN.
i hope this approach will solve your problem.
thanks
Swanand

How to identify the selection parameters of already executed transactions

Hi,
I like to identify the selection parameter of already executed transaction.
SM20 shows me which transaction was executed on which day and by whom.
But it does not give me it is executed with which kind of selection parameters.
For example, MD02/03 was executed many times, I like to know who execute it with parameter "2" for "create purchase req.".
How can I know it?
Regards,
Kenichi Kaneda

Hi,
I don't think so that SAP stores this information anywhere.

Adding Selection Parameters Dynamically

Similar Messages

Maybe you are looking for